Merge branch 'master' of https://github.com/qmk/qmk_firmware

1 files changed, 60 insertions, 0 deletions

diff --git a/keyboards/alice/readme.md b/keyboards/alice/readme.md
new file mode 100644
index 000000000..8e901ae7e
--- /dev/null
+++ b/keyboards/alice/readme.md
@@ -0,0 +1,60 @@
+# TGR Alice
+
+![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
+
+An ergonomic 60% keyboard.
+
+Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
+Hardware Supported: TGR Alice  
+Hardware Availability: Group buy finished  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alice:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+
+ps2avrGB keyboard firmware
+==========================
+
+This keyboard uses the port of the QMK firmware for boards that are based on the
+ps2avrGB firmware.
+
+Note that this is a complete replacement for the firmware, so you won't be
+using Bootmapper Client to change any keyboard settings, since not all the
+USB report options are supported.
+
+## Installing
+
+First, install the requirements. These commands are for OSX, but all you
+need is the AVR toolchain and `bootloadHID` for flashing:
+
+```
+$ brew cask install crosspack-avr
+$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+$ pip install pyusb
+```
+
+Then, with the keyboard plugged in, simply run this command from the
+`qmk_firmware` directory:
+
+```
+$ make alice
+$ bootloadHID -r alice_default.hex
+```
+
+## Setting the board to bootloader mode
+
+Hold the ESC key (the one before the 1! key, in case you remaped it).
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while holding the bootloader key. This will force
+   it to boot only the bootloader without loading the firmware. Once this is
+   done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+   to your computer or plugging/unplugging the USB hub.