aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/bigseries/rules.mk
diff options
context:
space:
mode:
authorCole Markham <github@ccmcomputing.net>2017-12-17 22:04:50 -0600
committerJack Humbert <jack.humb@gmail.com>2018-04-19 01:45:21 -0400
commit23b45710acc57ed147e006a8c79a1caf6fa57fd7 (patch)
treedb82f7aa15a256c0e02fd710d092fd7d9655212d /keyboards/bigseries/rules.mk
parentb4bdebab9a48546160465d64000724a07617054e (diff)
downloadfirmware-23b45710acc57ed147e006a8c79a1caf6fa57fd7.tar.gz
firmware-23b45710acc57ed147e006a8c79a1caf6fa57fd7.tar.bz2
firmware-23b45710acc57ed147e006a8c79a1caf6fa57fd7.zip
Add support for Big Series 1-key PCB by Woodkeys.click
Diffstat (limited to 'keyboards/bigseries/rules.mk')
-rwxr-xr-xkeyboards/bigseries/rules.mk59
1 files changed, 59 insertions, 0 deletions
diff --git a/keyboards/bigseries/rules.mk b/keyboards/bigseries/rules.mk
new file mode 100755
index 000000000..4cac07f72
--- /dev/null
+++ b/keyboards/bigseries/rules.mk
@@ -0,0 +1,59 @@
+#SRC += rgb_backlight.c
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port.
+