diff options
author | MechMerlin <30334081+mechmerlin@users.noreply.github.com> | 2018-05-09 21:37:04 -0700 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2018-05-10 00:37:04 -0400 |
commit | c5264d6d89899f19bdeeaf9e2daeb90531617a48 (patch) | |
tree | 8f3862554b76a24766df6addfc1009a719d722a8 /keyboards/ckeys/obelus/rules.mk | |
parent | 5346cb2d20100f2bbf35e8c8107ae272404f2198 (diff) | |
download | firmware-c5264d6d89899f19bdeeaf9e2daeb90531617a48.tar.gz firmware-c5264d6d89899f19bdeeaf9e2daeb90531617a48.tar.bz2 firmware-c5264d6d89899f19bdeeaf9e2daeb90531617a48.zip |
Move ckeys workshop to its own directory (#2928)
* move obelus and nakey to ckeys directory
* delete the originals
* short readme about ckeys
* edit readmes to reflect new changes
* add build guide info..and here's me trying to retrigger the build job
Diffstat (limited to 'keyboards/ckeys/obelus/rules.mk')
-rw-r--r-- | keyboards/ckeys/obelus/rules.mk | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk new file mode 100644 index 000000000..d999b118c --- /dev/null +++ b/keyboards/ckeys/obelus/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = yes # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = yes # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches |