GH60 Refactor: Move Satan into GH60 directory (#6485)

* Move Satan into the GH60 directory to avoid the confusion of what PCB people have

* set bootmagic to lite

* rename gh60 file to revc

22 files changed, 0 insertions, 2211 deletions

diff --git a/keyboards/gh60/keymaps/bluezio/keymap.c b/keyboards/gh60/keymaps/bluezio/keymap.c
deleted file mode 100644
index c0f650ecc..000000000
--- a/keyboards/gh60/keymaps/bluezio/keymap.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// lshift split, backspace split, full ANSI enter, full right shift
-#define KEYMAP_BZIO(                                                         \
-               K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
-               K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-               K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-               K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
-               K40, K41, K42,           K45,                K4A, K4B, K4C, K4D \
-                ) {                                                     \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \
-    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    KC_NO,    K49, K4A, K4B, K4C, K4D } \
-  }
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: HHKB with hyper key where ctrl used to be, and right half of left
-       shift used as a key lock */
-    KEYMAP_BZIO(
-        KC_ESC,           KC_1,    KC_2,    KC_3,  KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
-        KC_TAB,           KC_Q,    KC_W,    KC_E,  KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,\
-        KC_LCTL,          KC_A,    KC_S,    KC_D,  KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,\
-        KC_LSFT, KC_LOCK, KC_Z,    KC_X,    KC_C,  KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
-        KC_HYPR, KC_LGUI, KC_LALT, LT(1, KC_SPC),                                           KC_RALT, KC_RGUI, KC_APP,  KC_RCTL),
-
-    /* 1: spacefn with WASD arrows/navigation block and extra space key for
-       realignment of source code, plus IJKL mouse arrows, volume up/down in <>,
-       and caps lock where it used to be */
-    KEYMAP_BZIO(
-        KC_ESC,           KC_F1,   KC_F2,   KC_F3,     KC_F4,      KC_F5,      KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, \
-        KC_TRNS,          KC_PGUP, KC_UP,   KC_PGDOWN, KC_INSERT,  KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   \
-        KC_TRNS,          KC_LEFT, KC_DOWN, KC_RGHT,   KC_DELETE,  KC_MS_BTN1, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_HOME, KC_SPC,  KC_END,    KC_PSCREEN, KC_TRNS,    KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, \
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
diff --git a/keyboards/gh60/keymaps/bluezio/rules.mk b/keyboards/gh60/keymaps/bluezio/rules.mk
deleted file mode 100644
index 4b820c974..000000000
--- a/keyboards/gh60/keymaps/bluezio/rules.mk
+++ /dev/null
@@ -1,68 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
-# COMMAND_ENABLE = yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE = YES			# MIDI controls
-# UNICODE_ENABLE = YES		# Unicode
-# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-KEY_LOCK_ENABLE = yes # KC_LOCK
-
-LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift
diff --git a/keyboards/gh60/keymaps/chaser/README.md b/keyboards/gh60/keymaps/chaser/README.md
deleted file mode 100644
index e6ec9e82b..000000000
--- a/keyboards/gh60/keymaps/chaser/README.md
+++ /dev/null
@@ -1,96 +0,0 @@
-# [dragonchasers](https://github.com/dragonchaser) GH60 layout
-
-Layout derived from the default GH60 keymap.
-
-![Photo of the keyboard](https://pbs.twimg.com/media/DQzlD0yX0AA8spX.jpg)
-
-## Layers
-
-### Base Layer
-```
-,-----------------------------------------------------------.
-|Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-|-----------------------------------------------------------|
-|Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
-|-----------------------------------------------------------|
-|FN     |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
-|-----------------------------------------------------------|
-|Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  Up  |FN |
-|-----------------------------------------------------------|
-|Ctrl|Gui |Alt |      Space           |Alt |Left |Down|Right|
-`-----------------------------------------------------------'
-
-Note: right FN triggers function layer,
-      left FN(CAPS) is a one-shot button for the macro layer
-```
-
-### Function Layer
-```
-,-----------------------------------------------------------.
-|GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|   DEL |
-|-----------------------------------------------------------|
-|  MB3|MB2|MUP|MB1|MWU|   |   |   |INS|   |RST|   |   |Print|
-|-----------------------------------------------------------|
-|      | ML|MDN|MR |MWD|   |   |       |   |   |   |        |
-|-----------------------------------------------------------|
-|CAPS    |   |   |   |   |   |   |   |   |   |   |PGUP|     |
-|-----------------------------------------------------------|
-|    |    |    |                        |Ctrl|HOME|PGD |END |
-`-----------------------------------------------------------'
-```
-
-### Macro Layer
-```
-,-----------------------------------------------------------.
-|DEF|   |DUE|   |   |   |   |   |   |   |   |   |GAM|    ARR|
-|-----------------------------------------------------------|
-|     |MAG|CLO|DUT|RBS|TIG|   |   |   |COU|PSH|   |   |     |
-|-----------------------------------------------------------|
-|      |ADD|STS|DFF|FTC|PLL|   |       |LOG|   |   |        |
-|-----------------------------------------------------------|
-|         |   |   |COM|   |BRN|   |   |   |   |MUT|VOL+|PLPA|
-|-----------------------------------------------------------|
-|    |    |    |                        |APP |PREV|VOL-|NEXT|
-`-----------------------------------------------------------'
-
-Abbreviations:
---------------
-DEF  - return to default layer
-DUE  - enable git duet mode
-GAM  - backlight WASD
-ARR  - backlight arrows
--
-MAG  - git submodule sync --recursive \
-       && git submodule update --init --recursive \
-       && git submodule foreach --recursive "git co . \
-       && git reset --hard && git clean -dffx"
-CLO  - git clone
-DUT  - git duet (when in duet mode)
-RBS  - git rebase
-TIG  - tig
-COU  - git checkout
-PSH  - git push
--
-ADD  - git add
-STS  - git status
-DFF  - git diff
-FTC  - git fetch
-PLL  - git pull
-LOG  - git log
--
-COM  - git commit (or git duet commit if in duet mode)
-BRN  - git branch
-MUT  - audio mute
-VOL+ - increase volume
-PLPA - play/pause
--
-APP  - application (windows menu key)
-PREV - previous song
-VOL- - decrease volume
-NEXT - next song
-
-Note: git commands are SEND_STRING macros sent to the
-      currently focused window Make sure it is your terminal :)
- ```
-
-**NOTE:** an outdated version of this keymap is also present for the Satan keyboard, which is no longer maintained since I could not get my hands on a properly working PCB.
diff --git a/keyboards/gh60/keymaps/chaser/keymap.c b/keyboards/gh60/keymaps/chaser/keymap.c
deleted file mode 100644
index 29228eec2..000000000
--- a/keyboards/gh60/keymaps/chaser/keymap.c
+++ /dev/null
@@ -1,328 +0,0 @@
-#include QMK_KEYBOARD_H
-#include <util/delay.h>
-
-
-extern keymap_config_t keymap_config;
-
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QW 0
-#define _FL 1
-#define _MC 2
-
-bool git_duet = false;
-bool backlight_arrows = false;
-bool backlight_gaming = false;
-enum custom_keycodes {
-  /* GIT related keycodes */
-  G_ADD = SAFE_RANGE, G_BRN, G_COM, G_COU, G_CLO,
-  G_DFF, G_DUE, G_DUT, G_FTC, G_LOG, G_MAG, G_MRG,
-  G_MRT, G_PSH, G_PLL, G_RBS, G_STH, G_STS, G_TIG,
-
-  /* Multi-media related keycodes */
-  A_MUTE, A_NEXT, A_PLPA, A_PREV, A_VOUP, A_VDWN,
-
-  /* System related shortcuts */
-  F_BTN, M_WAPP, K_ARR, K_WASD,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /*
-   * ,-----------------------------------------------------------.
-   * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-   * |-----------------------------------------------------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
-   * |-----------------------------------------------------------|
-   * |FN     |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
-   * |-----------------------------------------------------------|
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  FN  |Up |
-   * |-----------------------------------------------------------|
-   * |Ctrl|Gui |Alt |      Space           |Alt |Left |Down|Right|
-   * `-----------------------------------------------------------'
-   *
-   * Note: right FN triggers function layer,
-   *       left FN is a one-shot button for the macro layer
-   */
-  /* Layer 0: Qwerty */
-  [_QW] = LAYOUT_60_ansi_split_rshift( \
-    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
-    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
-    OSL(_MC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  \
-    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          F_BTN,   KC_UP,   \
-    KC_LCTL,  KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT  \
-  ),
-
-  /*
-   * ,-----------------------------------------------------------.
-   * |GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|   DEL |
-   * |-----------------------------------------------------------|
-   * |  MB3|MB2|MUP|MB1|MWU|   |   |   |INS|   |RST|   |   |Print|
-   * |-----------------------------------------------------------|
-   * |      | ML|MDN|MR |MWD|   |   |       |   |   |   |        |
-   * |-----------------------------------------------------------|
-   * |CAPS    |   |   |   |   |   |   |   |   |   |   |PGUP|     |
-   * |-----------------------------------------------------------|
-   * |    |    |    |                        |Ctrl|HOME|PGD |END |
-   * `-----------------------------------------------------------'
-   */
-  /* Layer 1: Functions */
-  [_FL] = LAYOUT_60_ansi_split_rshift(
-    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
-    KC_BTN3, KC_BTN2, KC_MS_U, KC_BTN1, KC_WH_U, _______, _______, _______, KC_INS,  _______, RESET,   _______, _______, KC_PSCR, \
-    KC_CAPS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, _______,          KC_TILD, \
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_PGUP, \
-    _______, _______, _______,                   _______,                                     KC_RCTL, KC_HOME, KC_PGDN, KC_END   \
-  ),
-
-  /*
-   * ,-----------------------------------------------------------.
-   * |DEF|   |DUE|   |   |   |   |   |   |   |   |   |GAM|    ARR|
-   * |-----------------------------------------------------------|
-   * |     |MAG|CLO|DUT|RBS|TIG|MRT|   |   |COU|PSH|   |   |     |
-   * |-----------------------------------------------------------|
-   * |      |ADD|STS|DFF|FTC|PLL|MRG|   |STH|LOG|   |   |   F_OFF|
-   * |-----------------------------------------------------------|
-   * |         |   |   |COM|   |BRN|   |   |   |   |MUT|VOL+|PLPA|
-   * |-----------------------------------------------------------|
-   * |    |    |    |                        |APP |PREV|VOL-|NEXT|
-   * `-----------------------------------------------------------'
-   *
-   * Abbreviations:
-   * --------------
-   * DEF  - return to default layer
-   * DUE  - enable git duet mode
-   * CLO  - git clone
-   * DUT  - git duet (when in duet mode)
-   * RBS  - git rebase
-   * MAG  - git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive "git co . && git reset --hard && git clean -dffx"
-   * TIG  - tig
-   * MRG  - git merge
-   * MRT  - git mergetool
-   * COU  - git checkout
-   * PSH  - git push
-   * ADD  - git add
-   * STS  - git status
-   * DFF  - git diff
-   * FTC  - git fetch
-   * PLL  - git pull
-   * STH  - git stash
-   * LOG  - git log
-   * COM  - git commit (or git duet commit if in duet mode)
-   * BRN  - git branch
-   * APP  - application (windows menu key)
-   * MUT  - audio mute
-   * VOL+ - increase volume
-   * VOL- - decrease volume
-   * PLPA - play/pause
-   * PREV - previous song
-   * NEXT - next song
-   * ARR  - backlight arrow keys
-   * GAM  - backlight WASD
-   *
-   * Note: git commands are SEND_STRING macros sent to the
-   *       currently focused window Make sure it is your terminal :)
-   */
-  /* Layer 2: Macros (Git & Multimedia) */
-  [_MC] = LAYOUT_60_ansi_split_rshift( \
-    TO(_QW), XXXXXXX, G_DUE,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, K_WASD,  K_ARR,   \
-    XXXXXXX, G_MAG,   G_CLO,   G_DUT,   G_RBS,   G_TIG,   G_MRT,   XXXXXXX, XXXXXXX, G_COU,   G_PSH,   XXXXXXX, XXXXXXX, XXXXXXX, \
-    XXXXXXX, G_ADD,   G_STS,   G_DFF,   G_FTC,   G_PLL,   G_MRG,   XXXXXXX, G_STH,   G_LOG,   XXXXXXX, XXXXXXX,          XXXXXXX, \
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, G_COM,   XXXXXXX, G_BRN,   XXXXXXX, XXXXXXX, XXXXXXX, A_MUTE,           A_PLPA,  A_VOUP,  \
-    XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX,                                     M_WAPP,  A_PREV,  A_VDWN,  A_NEXT   \
-  ),
-
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-      /*
-       * Begin git layer
-       */
-      case G_ADD:
-        SEND_STRING("git add ");
-        layer_off(_MC);
-        return false;break;
-      case G_BRN:
-        SEND_STRING("git branch\n");
-        layer_off(_MC);
-        return false;break;
-      case G_CLO:
-        SEND_STRING("git clone ");
-        layer_off(_MC);
-        return false;break;
-      case G_COM:
-        if(git_duet) {
-          SEND_STRING("git duet-commit ");
-        } else {
-          SEND_STRING("git commit ");
-        }
-        layer_off(_MC);
-        return false;break;
-      case G_COU:
-        SEND_STRING("git checkout ");
-        layer_off(_MC);
-        return false;break;
-      case G_DFF:
-        SEND_STRING("git diff\n");
-        layer_off(_MC);
-        return false;break;
-      case G_DUE:
-        git_duet = !git_duet;
-        if(git_duet) {
-          gh60_esc_led_on();
-        } else {
-          gh60_esc_led_off();
-        }
-        layer_off(_MC);
-        return false;break;
-      case G_DUT:
-        if(git_duet) {
-          SEND_STRING("git duet ");
-        }
-        layer_off(_MC);
-        return false; break;
-      case G_FTC:
-        SEND_STRING("git fetch ");
-        layer_off(_MC);
-        return false;break;
-      case G_LOG:
-        SEND_STRING("git log --graph\n");
-        layer_off(_MC);
-        return false;break;
-      case G_MAG:
-        // This is some git-magic to resync recursive submodule structures inside git projects (thx to https://github.com/jimmykarily)
-        SEND_STRING("git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive \" git co . && git reset --hard && git clean -dffx \" \n");
-        layer_off(_MC);
-        return false; break;
-      case G_MRG:
-        SEND_STRING("git merge ");
-        layer_off(_MC);
-        return false;break;
-      case G_MRT:
-        SEND_STRING("git mergetool ");
-        layer_off(_MC);
-        return false;break;
-      case G_PLL:
-        SEND_STRING("git pull ");
-        layer_off(_MC);
-        return false;break;
-      case G_PSH:
-        SEND_STRING("git push ");
-        layer_off(_MC);
-        return false;break;
-      case G_RBS:
-        SEND_STRING("git rebase ");
-        layer_off(_MC);
-        return false;break;
-      case G_STH:
-        SEND_STRING("git stash ");
-        layer_off(_MC);
-        return false;break;
-      case G_STS:
-        SEND_STRING("git status\n");
-        layer_off(_MC);
-        return false;break;
-      case G_TIG:
-        SEND_STRING("tig\n");
-        layer_off(_MC);
-        return false;break;
-      /*
-       * End git layer
-       */
-
-      /*
-       * Begin multimedia keys
-       */
-      case A_MUTE:
-        register_code(KC_AUDIO_MUTE);
-        unregister_code(KC_AUDIO_MUTE);
-        layer_off(_MC);
-        return false;break;
-      case A_PLPA:
-        register_code(KC_MEDIA_PLAY_PAUSE);
-        unregister_code(KC_MEDIA_PLAY_PAUSE);
-        layer_off(_MC);
-        return false;break;
-      case A_VOUP:
-        register_code(KC_AUDIO_VOL_UP);
-        return false;break;
-      case A_VDWN:
-        register_code(KC_AUDIO_VOL_DOWN);
-        return false;break;
-      case A_PREV:
-        register_code(KC_MEDIA_PREV_TRACK);
-        unregister_code(KC_MEDIA_PREV_TRACK);
-        layer_off(_MC);
-        return false;break;
-      case A_NEXT:
-        register_code(KC_MEDIA_NEXT_TRACK);
-        unregister_code(KC_MEDIA_NEXT_TRACK);
-        layer_off(_MC);
-        return false;break;
-      /*
-       * End multimedia keys
-       */
-
-      // Tap dance to get the app button mapped
-      case M_WAPP:
-        register_code(KC_APP);
-        unregister_code(KC_APP);
-        layer_off(_MC);
-        return false;break;
-
-      /*
-       * Begin multimedia keys
-       */
-      case K_ARR:
-        backlight_arrows = !backlight_arrows;
-        if(backlight_arrows) {
-          gh60_poker_leds_on();
-        } else {
-          gh60_poker_leds_off();
-        }
-        layer_off(_MC);
-        return false;break;
-      case K_WASD:
-        backlight_gaming = !backlight_gaming;
-        if(backlight_gaming) {
-          gh60_wasd_leds_on();
-        } else {
-          gh60_wasd_leds_off();
-        }
-        layer_off(_MC);
-        return false; break;
-      case F_BTN:
-        gh60_fn_led_on();
-        layer_on(_FL);
-        return false;break;
-    }
-    /*
-     * End multimedia keys
-     */
-
-  } else {
-    switch(keycode) {
-      /*
-       * Oneshots that will switch back to the default layer on KEY_UP
-       */
-      case A_VOUP:
-        unregister_code(KC_AUDIO_VOL_UP);
-        layer_off(_MC);
-        return false;break;
-      case A_VDWN:
-        unregister_code(KC_AUDIO_VOL_DOWN);
-        layer_off(_MC);
-        return false;break;
-      case F_BTN:
-        layer_off(_FL);
-        gh60_fn_led_off();
-        return false;break;
-    }
-  }
-  return true;
-};
diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h
deleted file mode 100644
index 8952200e0..000000000
--- a/keyboards/gh60/keymaps/dbroqua/config.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
-#define DEVICE_VER   0x0001
-#define MANUFACTURER    geekhack
-#define PRODUCT         GH60
-#define DESCRIPTION     t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1     H
-//#define MAGIC_KEY_HELP2     SLASH
-//#define MAGIC_KEY_DEBUG     D
-//#define MAGIC_KEY_DEBUG_MATRIX  X
-//#define MAGIC_KEY_DEBUG_KBD   K
-//#define MAGIC_KEY_DEBUG_MOUSE  M
-//#define MAGIC_KEY_VERSION    V
-//#define MAGIC_KEY_STATUS     S
-//#define MAGIC_KEY_CONSOLE    C
-//#define MAGIC_KEY_LAYER0_ALT1  ESC
-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
-//#define MAGIC_KEY_LAYER0     0
-//#define MAGIC_KEY_LAYER1     1
-//#define MAGIC_KEY_LAYER2     2
-//#define MAGIC_KEY_LAYER3     3
-//#define MAGIC_KEY_LAYER4     4
-//#define MAGIC_KEY_LAYER5     5
-//#define MAGIC_KEY_LAYER6     6
-//#define MAGIC_KEY_LAYER7     7
-//#define MAGIC_KEY_LAYER8     8
-//#define MAGIC_KEY_LAYER9     9
-//#define MAGIC_KEY_BOOTLOADER   PAUSE
-//#define MAGIC_KEY_LOCK      CAPS
-//#define MAGIC_KEY_EEPROM     E
-//#define MAGIC_KEY_NKRO      N
-//#define MAGIC_KEY_SLEEP_LED   Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * RGB Underglow
- * These settings are for the F4 by default:
- *
- *
- * #define ws2812_pin PF4
- * #define RGBLED_NUM 14     // Number of LEDs
- * #define RGBLIGHT_HUE_STEP 10
- * #define RGBLIGHT_SAT_STEP 17
- * #define RGBLIGHT_VAL_STEP 17
- *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
-*/
-
-#define RGB_DI_PIN F4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 11         // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
diff --git a/keyboards/gh60/keymaps/dbroqua/keymap.c b/keyboards/gh60/keymaps/dbroqua/keymap.c
deleted file mode 100644
index 2030355a7..000000000
--- a/keyboards/gh60/keymaps/dbroqua/keymap.c
+++ /dev/null
@@ -1,196 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _DEFAULT 0
-#define _FN 1
-#define _WASD 2
-#define _SFX 3
-
-//bool esc_led_on;
-
-enum planck_keycodes {
-  DEFAULT = SAFE_RANGE
-};
-
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty gui/alt/space/alt/gui
- * ,-----------------------------------------------------------------------------------------.
- * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
- * |-----------------------------------------------------------------------------------------+
- * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
- * |-----------------------------------------------------------------------------------------+
- * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
- * |-----------------------------------------------------------------------------------------+
- *         |LGUI | LAlt  |               Space                | RAlt   |RGUI |
- *         `-----------------------------------------------------------------'
- */
-  [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */
-      KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5,   KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
-      KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,  \
-      KC_LCTL, KC_A,    KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
-      KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(_FN), \
-      ______,  KC_LGUI, KC_LALT,             KC_SPC,             KC_RALT, KC_RGUI, ______,  ______ \
-      ),
-
-/* FN Layer
- * ,-----------------------------------------------------------------------------------------.
- * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
- * |-----------------------------------------------------------------------------------------+
- * |  CAPS  |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     |        |
- * |-----------------------------------------------------------------------------------------+
- * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
- * |-----------------------------------------------------------------------------------------+
- * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
- * |-----------------------------------------------------------------------------------------+
- *         |       |       |                                 | Stop  |       |
- *         `-----------------------------------------------------------------'
- */
-  [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */
-      TG(_SFX),KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11, KC_F12, KC_INS,  KC_DEL, \
-      KC_CAPS, ______,  ______,  ______,  ______, ______, ______,  ______,  KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,  ______, ______,  \
-      ______,  KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______,   \
-      ______,  KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, ______, ______,  \
-      ______,  ______,  ______,                   TG(_WASD),                   KC_MSTP, ______,  ______,  ______ \
-      ),
-
-/* WASD Layer
- * ,-----------------------------------------------------------------------------------------.
- * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
- * |-----------------------------------------------------------------------------------------+
- * |        |     | Up  |     |     |     |     |     |     |     |     |     |     |        |
- * |-----------------------------------------------------------------------------------------+
- * |         | Left| Down|Right|     |     |     |     |     |     |     |     |             |
- * |-----------------------------------------------------------------------------------------+
- * |           |     |     |     |     |     |     |     |      |    |     |           |     |
- * |-----------------------------------------------------------------------------------------+
- *         |       |       |                                 |       |       |
- *         `-----------------------------------------------------------------'
- */
-  [_WASD] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 2 */
-      ______,   ______,  ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  ______, \
-      ______,   ______,  KC_UP,  ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
-      ______,   KC_LEFT, KC_DOWN,KC_RGHT,______, ______, ______, ______, ______, ______, ______, ______, ______,   \
-      ______,   ______,  ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______,  \
-      ______,   ______,  ______,                ______,                 ______, ______, ______, ______ \
-      ),
-
-/* SFX Layer
- * ,-----------------------------------------------------------------------------------------.
- * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
- * |-----------------------------------------------------------------------------------------+
- * |        | BL- | BL+ | BL  |     |     |     |     |     |     |     |     |     |        |
- * |-----------------------------------------------------------------------------------------+
- * |         | RGBT| RGBM|     |     |     |     |     |     |     |     |     |             |
- * |-----------------------------------------------------------------------------------------+
- * |           | Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |      |    |     |           |     |
- * |-----------------------------------------------------------------------------------------+
- *         |       |       |                                 |       |       |
- *         `-----------------------------------------------------------------'
- */
-  [_SFX] = LAYOUT_60_ansi_split_bs_rshift(
-      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
-      ______,   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,  \
-      ______,   F(0),   F(1),   ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,   \
-      ______,   F(2),   F(3),   F(4),   F(5),   F(6),   F(7),   ______, ______, ______, ______, ______, ______,  \
-      ______,   ______, ______,                 ______,                 ______, ______, ______, ______ \
-      )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-  return MACRO_NONE;
-};
-
-enum function_id {
-    RGBLED_TOGGLE,
-    RGBLED_STEP_MODE,
-    RGBLED_INCREASE_HUE,
-    RGBLED_DECREASE_HUE,
-    RGBLED_INCREASE_SAT,
-    RGBLED_DECREASE_SAT,
-    RGBLED_INCREASE_VAL,
-    RGBLED_DECREASE_VAL
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(RGBLED_TOGGLE),
-  [1]  = ACTION_FUNCTION(RGBLED_STEP_MODE),
-  [2]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
-  [3]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
-  [4]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
-  [5]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
-  [6]  = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
-  [7]  = ACTION_FUNCTION(RGBLED_DECREASE_VAL)
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  switch (id) {
-    case RGBLED_TOGGLE:
-      if (record->event.pressed) {
-        rgblight_toggle();
-      }
-      break;
-    case RGBLED_INCREASE_HUE:
-      if (record->event.pressed) {
-        rgblight_increase_hue();
-      }
-      break;
-    case RGBLED_DECREASE_HUE:
-      if (record->event.pressed) {
-        rgblight_decrease_hue();
-      }
-      break;
-    case RGBLED_INCREASE_SAT:
-      if (record->event.pressed) {
-        rgblight_increase_sat();
-      }
-      break;
-    case RGBLED_DECREASE_SAT:
-      if (record->event.pressed) {
-        rgblight_decrease_sat();
-      }
-      break;
-    case RGBLED_INCREASE_VAL:
-      if (record->event.pressed) {
-        rgblight_increase_val();
-      }
-      break;
-    case RGBLED_DECREASE_VAL:
-      if (record->event.pressed) {
-        rgblight_decrease_val();
-      }
-      break;
-    case RGBLED_STEP_MODE:
-      if (record->event.pressed) {
-        rgblight_step();
-      }
-      break;
-  }
-}
-
-void matrix_scan_user(void) {
-    uint32_t layer = layer_state;
-
-    if (layer & (1<<1)) {
-        gh60_fn_led_on();
-    } else {
-        gh60_fn_led_off();
-    }
-
-    if (layer & (1<<2)) {
-        gh60_wasd_leds_on();
-    } else {
-        gh60_wasd_leds_off();
-    }
-
-    if (layer & (1<<3)) {
-        gh60_esc_led_on();
-    } else {
-        gh60_esc_led_off();
-    }
-};
\ No newline at end of file
diff --git a/keyboards/gh60/keymaps/dbroqua/rules.mk b/keyboards/gh60/keymaps/dbroqua/rules.mk
deleted file mode 100644
index 21d4b60d9..000000000
--- a/keyboards/gh60/keymaps/dbroqua/rules.mk
+++ /dev/null
@@ -1,107 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
-# COMMAND_ENABLE = yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE = YES		# MIDI controls
-# UNICODE_ENABLE = YES		# Unicode
-# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes    # Enable RGB Underglow
-
diff --git a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c
deleted file mode 100644
index 74ff97a93..000000000
--- a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c
+++ /dev/null
@@ -1,87 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _DEFAULT 0
-#define _FN 1
-
-int esc_led = 0;
-
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty gui/alt/space/alt/gui
- * ,-----------------------------------------------------------------------------------------.
- * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
- * |-----------------------------------------------------------------------------------------+
- * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
- * |-----------------------------------------------------------------------------------------+
- * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
- * |-----------------------------------------------------------------------------------------+
- *         |LGUI | LAlt  |               Space                | RAlt   |RGUI |
- *         `-----------------------------------------------------------------'
- */
-  [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */
-      KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5,   KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
-      KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,  \
-      KC_LCTL, KC_A,    KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
-      KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(_FN), \
-      ______,  KC_LGUI, KC_LALT,             KC_SPC,             ______,  KC_RALT, KC_RGUI, ______ \
-      ),
-
-/* FN Layer
- * ,-----------------------------------------------------------------------------------------.
- * | Led | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
- * |-----------------------------------------------------------------------------------------+
- * |  CAPS  |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     |        |
- * |-----------------------------------------------------------------------------------------+
- * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
- * |-----------------------------------------------------------------------------------------+
- * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
- * |-----------------------------------------------------------------------------------------+
- *         |       |       |                                 | Stop  |       |
- *         `-----------------------------------------------------------------'
- */
-  [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */
-      F(0),   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11, KC_F12, KC_INS,  KC_DEL, \
-      KC_CAPS, ______,  ______,  ______,  ______, ______, ______,  ______,  KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,  ______, ______,  \
-      ______,  KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______,   \
-      ______,  KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, ______, ______,  \
-      ______,  ______,  ______,                   ______,                   ______,  KC_MSTP, ______,  ______ \
-      )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-  return MACRO_NONE;
-};
-
-enum function_id {
-    LED_TOGGLE
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(LED_TOGGLE)
-};
-
-void esc_led_toggle(void) {
-    if (esc_led == 0){
-        esc_led = 1;
-        gh60_esc_led_on();
-    } else {
-        esc_led = 0;
-        gh60_esc_led_off();
-    }
-}
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  switch (id) {
-    case LED_TOGGLE:
-      if (record->event.pressed) {
-        esc_led_toggle();
-      }
-      break;
-  }
-}
\ No newline at end of file
diff --git a/keyboards/gh60/keymaps/dbroqua_7U/rules.mk b/keyboards/gh60/keymaps/dbroqua_7U/rules.mk
deleted file mode 100644
index 21192b179..000000000
--- a/keyboards/gh60/keymaps/dbroqua_7U/rules.mk
+++ /dev/null
@@ -1,107 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
-# COMMAND_ENABLE = yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE = YES		# MIDI controls
-# UNICODE_ENABLE = YES		# Unicode
-# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no    # Enable RGB Underglow
-
diff --git a/keyboards/gh60/keymaps/default/keymap.c b/keyboards/gh60/keymaps/default/keymap.c
deleted file mode 100644
index a8fd4f3c2..000000000
--- a/keyboards/gh60/keymaps/default/keymap.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    [0] = LAYOUT_all( /* 0: qwerty */
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
-        KC_LSFT, TG(2),   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
-        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
-    ),
-
-    [1] = LAYOUT_all( /* 1: fn */
-        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
-        _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______,                   _______,                                     _______, _______, _______, _______
-    ),
-
-    [2] = LAYOUT_all( /* 2: arrows */
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______,
-        _______, _______, _______,                   _______,                                     _______, KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-};
-
-void matrix_scan_user(void) {
-
-//Layer LED indicators
-    uint32_t layer = layer_state;
-
-    if (layer & (1<<1)) {
-        gh60_wasd_leds_on();
-        gh60_fn_led_on();
-    } else {
-        gh60_wasd_leds_off();
-        gh60_fn_led_off();
-    }
-
-    if (layer & (1<<2)) {
-        gh60_poker_leds_on();
-        gh60_esc_led_on();
-    } else {
-        gh60_poker_leds_off();
-        gh60_esc_led_off();
-    }
-
-};
diff --git a/keyboards/gh60/keymaps/emiilsd/keymap.c b/keyboards/gh60/keymaps/emiilsd/keymap.c
deleted file mode 100644
index a863511d6..000000000
--- a/keyboards/gh60/keymaps/emiilsd/keymap.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright 2018 Funderburker
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /*
-    ISO HHKB layout:
-
-    * 2u Backspace
-    * ISO Enter
-    * split left Shift
-    * split right Shift
-    * Caps as Control
-    * 1u/1.5u/7u/1.5u//1u bottom row
-  */
-
-  /* 0: QWERTY */
-  [0] = LAYOUT(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_NO,
-    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
-    KC_LSFT, KC_GRV,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(1),    KC_RSFT,
-    KC_NO,   KC_LALT, KC_LGUI,                   KC_SPC,                             KC_NO,   KC_NO,   KC_RALT, KC_CAPSLOCK, KC_NO
-  ),
-
-  /* 1: Fn layer */
-  [1] = LAYOUT(
-    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END,  KC_UP,   _______, _______,
-    _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, KC_PGUP, KC_LEFT, KC_RGHT, _______, _______,
-    _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_DOWN, _______, _______,
-    _______, _______, _______,                   _______,                            _______, _______, _______, _______, _______
-  ),
-
-};
diff --git a/keyboards/gh60/keymaps/maartenwut/keymap.c b/keyboards/gh60/keymaps/maartenwut/keymap.c
deleted file mode 100755
index d5e101e7f..000000000
--- a/keyboards/gh60/keymaps/maartenwut/keymap.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _MA 0
-#define _GA 1
-#define _FL 2
-#define _AR 3
-
-#define TRNS KC_TRNS
-#define trigger_time 400
-
-#define LSHIFT OSM(MOD_LSFT)
-#define SPACE LT(_AR, KC_SPC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// Main Layer
-[_MA] = LAYOUT_60_ansi_split_bs_rshift(
-  KC_GESC,  KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_NO,
-  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,
-  KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,          KC_ENT,
-  LSHIFT,         KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,  KC_DEL,
-  KC_LCTL,  KC_LGUI,  KC_LALT,                    SPACE,                      KC_NO,    KC_RALT,  MO(_FL),  KC_RCTRL),
-
-//Function Layer
-[_FL] = LAYOUT_60_ansi_split_bs_rshift(
-  KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   RESET,    KC_NO,
-  TRNS,     TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,   TRNS,   KC_PSCR,
-  TRNS,     KC_MS_L,  KC_MS_D,  KC_MS_R,  TRNS,   TG(_GA),  TRNS,   TRNS,   TRNS,   TRNS,   TRNS,   TRNS,         TRNS,
-  TRNS,           TRNS,   TRNS,   TRNS,   TRNS,     TRNS,     TRNS,   TRNS,   KC_VOLD,  KC_VOLU,  KC_MUTE,  TRNS,   KC_MPLY,
-  TRNS,     TRNS,     TRNS,                     TRNS,                     TRNS,   TRNS,   TRNS,   TRNS),
-
-//Arrow keys layer (space bar)
-[_AR] = LAYOUT_60_ansi_split_bs_rshift(
-  KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   TRNS,   KC_NO,
-  TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     KC_PGUP,  KC_UP,    KC_PGDN,    TRNS,     TRNS,   TRNS,   TRNS,
-  TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     KC_LEFT,  KC_DOWN,    KC_RGHT,    TRNS,     TRNS,           TRNS,
-  TRNS,         TRNS,   TRNS,   TRNS,   TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,   TRNS,     TRNS,     TRNS,
-  TRNS,     TRNS,     TRNS,                     TRNS,                     TRNS,   TRNS,     TRNS,   TRNS),
-
-//Game layer (fn + g)
-[_GA] = LAYOUT_60_ansi_split_bs_rshift(
-  TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,   TRNS,   TRNS,   KC_NO,
-  TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,   TRNS,   TRNS,
-  TRNS,   TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,           TRNS,
-  KC_LSFT,        TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,     TRNS,   TRNS,     TRNS,   TRNS,
-  TRNS,     TRNS,     TRNS,                     KC_SPC,                     TRNS,   TRNS,     MO(_FL),  TRNS),
-
-};
diff --git a/keyboards/gh60/keymaps/maxr1998/config.h b/keyboards/gh60/keymaps/maxr1998/config.h
deleted file mode 100644
index 8c3b9b250..000000000
--- a/keyboards/gh60/keymaps/maxr1998/config.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2017 Max Rumpf alias Maxr1998 <max.rumpf1998@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define RGB_DI_PIN          F4 // pin the DI on the WS2812B is hooked-up to
-#define RGBLIGHT_ANIMATIONS    // run RGB animations
-#define RGBLED_NUM          6  // number of LEDs
-#define RGBLIGHT_HUE_STEP   12 // units to step when in/decreasing hue
-#define RGBLIGHT_SAT_STEP   25 // units to step when in/decresing saturation
-#define RGBLIGHT_VAL_STEP   12 // units to step when in/decreasing value (brightness)
-
-#endif
\ No newline at end of file
diff --git a/keyboards/gh60/keymaps/maxr1998/keymap.c b/keyboards/gh60/keymaps/maxr1998/keymap.c
deleted file mode 100644
index eff94ff65..000000000
--- a/keyboards/gh60/keymaps/maxr1998/keymap.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-Copyright 2017 Max Rumpf alias Maxr1998 <max.rumpf1998@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-#define KC_EURO RALT(KC_5)
-
-#define SWITCH_LANG SEND_STRING(SS_LGUI(SS_TAP(X_SPACE)))
-#define PRINT_UMLAUT(str) SWITCH_LANG;_delay_ms(90);SEND_STRING(str);SWITCH_LANG;
-
-enum custom_keycodes {
-    MCO_AE = SAFE_RANGE,
-    MCO_OE = SAFE_RANGE + 1,
-    MCO_UE = SAFE_RANGE + 2,
-    MCO_SS = SAFE_RANGE + 3,
-    TP_REQ = SAFE_RANGE + 10,
-    TP_ACC = SAFE_RANGE + 11
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* 0: qwertz */
-  LAYOUT(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,\
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Z,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_NO,  \
-    KC_LOCK, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_HOME, KC_ENT, \
-    KC_LSFT, KC_BSLS, KC_Y,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_UP,   KC_RSFT,\
-    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_NO,   F(0),    KC_LEFT, KC_DOWN, KC_RGHT),
-  /* 1: fn */
-  LAYOUT(
-    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, \
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_EURO, TP_REQ,  TP_ACC,  KC_TRNS, MCO_UE,  KC_TRNS, MCO_OE,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
-    KC_TRNS, MCO_AE,  MCO_SS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_SW,KC_TRNS, KC_GRV,  KC_TRNS,\
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS,\
-    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0] = ACTION_LAYER_MOMENTARY(1)  // to Fn overlay
-};
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch (keycode) {
-      case MCO_AE:
-      PRINT_UMLAUT("'"); // ä
-      return false;
-      case MCO_OE:
-      PRINT_UMLAUT(";"); // ö
-      return false;
-      case MCO_UE:
-      PRINT_UMLAUT("["); // ü
-      return false;
-      case MCO_SS:
-      PRINT_UMLAUT("-"); // ß
-      return false;
-      case TP_REQ:
-      SEND_STRING("/tpa ");
-      return false;
-      case TP_ACC:
-      SEND_STRING("/tpaccept"SS_TAP(X_ENTER));
-      return false;
-    }
-  }
-  return true;
-}
\ No newline at end of file
diff --git a/keyboards/gh60/keymaps/maxr1998/rules.mk b/keyboards/gh60/keymaps/maxr1998/rules.mk
deleted file mode 100644
index d64f11e1f..000000000
--- a/keyboards/gh60/keymaps/maxr1998/rules.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-# Build Options
-#   comment out to disable the options.
-#
-RGBLIGHT_ENABLE = yes # Enable RGB Underglow
-KEY_LOCK_ENABLE = yes # Enable key lock option
-SKIP_GIT = yes
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
deleted file mode 100644
index 1cc41d183..000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
-#define PRODUCT_ID   0x6060
-#define DEVICE_VER   0x0001
-#define MANUFACTURER    geekhack
-#define PRODUCT         GH60
-#define DESCRIPTION     t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-// Rev A
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
-// Rev B/C
-   #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1     H
-//#define MAGIC_KEY_HELP2     SLASH
-//#define MAGIC_KEY_DEBUG     D
-//#define MAGIC_KEY_DEBUG_MATRIX  X
-//#define MAGIC_KEY_DEBUG_KBD   K
-//#define MAGIC_KEY_DEBUG_MOUSE  M
-//#define MAGIC_KEY_VERSION    V
-//#define MAGIC_KEY_STATUS     S
-//#define MAGIC_KEY_CONSOLE    C
-//#define MAGIC_KEY_LAYER0_ALT1  ESC
-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
-//#define MAGIC_KEY_LAYER0     0
-//#define MAGIC_KEY_LAYER1     1
-//#define MAGIC_KEY_LAYER2     2
-//#define MAGIC_KEY_LAYER3     3
-//#define MAGIC_KEY_LAYER4     4
-//#define MAGIC_KEY_LAYER5     5
-//#define MAGIC_KEY_LAYER6     6
-//#define MAGIC_KEY_LAYER7     7
-//#define MAGIC_KEY_LAYER8     8
-//#define MAGIC_KEY_LAYER9     9
-//#define MAGIC_KEY_BOOTLOADER   PAUSE
-//#define MAGIC_KEY_LOCK      CAPS
-//#define MAGIC_KEY_EEPROM     E
-//#define MAGIC_KEY_NKRO      N
-//#define MAGIC_KEY_SLEEP_LED   Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * RGB Underglow
- * These settings are for the F4 by default:
- *
- *
- * #define ws2812_pin PF4
- * #define RGBLED_NUM 14     // Number of LEDs
- * #define RGBLIGHT_HUE_STEP 10
- * #define RGBLIGHT_SAT_STEP 17
- * #define RGBLIGHT_VAL_STEP 17
- *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
-*/
-
-#define RGB_DI_PIN F4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8         // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c
deleted file mode 100644
index 649cbec38..000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/keymap.c
+++ /dev/null
@@ -1,225 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _AL 1
-#define _FL 2
-#define _UL 3
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-   /*
-   *  Base layer, pretty standard ANSI layout.
-   * ,-----------------------------------------------------------.
-   * |F(12)| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-   * |-----------------------------------------------------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-   * |-----------------------------------------------------------|
-   * |Caps/Fn|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
-   * |-----------------------------------------------------------|
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-   * |-----------------------------------------------------------|
-   * |Ctrl|Gui |Alt |      Space             |Alt |Fn  |Menu|Ctrl|
-   * `-----------------------------------------------------------'
-   */
-  [_BL] = LAYOUT(
-        F(12),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
-        KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
-        F(2),KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT,  \
-        KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
-        KC_LCTL,KC_LGUI,KC_LALT,        KC_SPC,      KC_NO,KC_RALT,F(0),KC_APP,KC_RCTL),
-
-   /*
-   * Locking arrow keys to WASD for when you need dedicated arrow keys
-   * ,-----------------------------------------------------------.
-   * |    |  |   |   |   |   |   |   |   |   |   |   |   |       |
-   * |-----------------------------------------------------------|
-   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |
-   * |-----------------------------------------------------------|
-   * |       |Left|Down|Rght|   |   |   |   |   |   |   |   |    |
-   * |-----------------------------------------------------------|
-   * |        |   |   |   |   |   |   |   |   |   |   |          |
-   * |-----------------------------------------------------------|
-   * |    |    |    |                        |    |    |    |    |
-   * `-----------------------------------------------------------'
-   */
-  [_AL] = LAYOUT(
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,   \
-        KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-
-
-   /*
-   * Primary function layer, mostly the same as the traditional Pok3r layout.
-   * ,-------------------------------------------------------------.
-   * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL   |
-   * |-------------------------------------------------------------|
-   * |    |_AL|   |   |  |  |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause|  |
-   * |-------------------------------------------------------------|
-   * |      |   |   |   |   |   |Home|Left|Down|Rght|Ins|   |      |
-   * |-------------------------------------------------------------|
-   * |        |_UL|   |   |   |   |   |    |    |    |   |         |
-   * |-------------------------------------------------------------|
-   * |    |    |    |                          |    |    |    |    |
-   * `-------------------------------------------------------------'
-   */
-  [_FL] = LAYOUT(
-        KC_GRAVE,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
-        KC_TRNS,F(1),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, \
-        KC_TRNS,KC_MUTE,KC__VOLDOWN,KC__VOLUP,KC_TRNS,KC_TRNS,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_TRNS,F(3),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-
-   /*
-   * Locking layer for controlling the underglow.
-   *
-   * ,-----------------------------------------------------------.
-   * |    |  |   |   |   |   |   |   |   |   |   |   |   |       |
-   * |-----------------------------------------------------------|
-   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
-   * |-----------------------------------------------------------|
-   * |       |On|Mode|   |   |   |   |   |   |   |   |   |       |
-   * |-----------------------------------------------------------|
-   * |        |   |Hue+|Hue-|Sat+|Sat-|Val+|Val-|  |  |   |      |
-   * |-----------------------------------------------------------|
-   * |    |    |    |                        |    |    |    |    |
-   * `-----------------------------------------------------------'
-   */
-  [_UL] = LAYOUT(
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
-        KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,   \
-        KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-};
-
-enum function_id {
-    RGBLED_TOGGLE,
-    RGBLED_STEP_MODE,
-    RGBLED_INCREASE_HUE,
-    RGBLED_DECREASE_HUE,
-    RGBLED_INCREASE_SAT,
-    RGBLED_DECREASE_SAT,
-    RGBLED_INCREASE_VAL,
-    RGBLED_DECREASE_VAL,
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [0]  = ACTION_LAYER_MOMENTARY(2),  // Momentary Fn overlay
-    [1]  = ACTION_LAYER_TOGGLE(1),     // Toggle Arrow Layer overlay
-    [2]  = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
-    [3]  = ACTION_LAYER_TOGGLE(3),     // Toggle Underglow Layer overlay
-    [4]  = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
-    [5]  = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
-    [6]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
-    [7]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
-    [8]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
-    [9]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
-    [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
-    [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
-    [12] = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-void matrix_scan_user(void) {
-
-// Layer LED indicators
-// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
-    uint32_t layer = layer_state;
-    if (layer & (1<<1)) {
-        gh60_wasd_leds_on();
-    } else {
-        gh60_wasd_leds_off();
-    }
-
-    if (layer & (1<<2)) {
-        gh60_esc_led_on();
-    } else {
-        gh60_esc_led_off();
-    }
-};
-
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  switch (id) {
-    case RGBLED_TOGGLE:
-      //led operations
-      if (record->event.pressed) {
-        rgblight_toggle();
-        }
-        break;
-    case RGBLED_INCREASE_HUE:
-      if (record->event.pressed) {
-        rgblight_increase_hue();
-        }
-        break;
-    case RGBLED_DECREASE_HUE:
-      if (record->event.pressed) {
-        rgblight_decrease_hue();
-        }
-        break;
-    case RGBLED_INCREASE_SAT:
-      if (record->event.pressed) {
-        rgblight_increase_sat();
-        }
-        break;
-    case RGBLED_DECREASE_SAT:
-      if (record->event.pressed) {
-        rgblight_decrease_sat();
-        }
-        break;
-    case RGBLED_INCREASE_VAL:
-        if (record->event.pressed) {
-          rgblight_increase_val();
-        }
-        break;
-    case RGBLED_DECREASE_VAL:
-        if (record->event.pressed) {
-          rgblight_decrease_val();
-        }
-        break;
-    case RGBLED_STEP_MODE:
-        if (record->event.pressed) {
-          rgblight_step();
-        }
-        break;
-    static uint8_t shift_esc_shift_mask;
-    // Shift + ESC = ~
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-    }
-};
diff --git a/keyboards/gh60/keymaps/robotmaxtron/readme.md b/keyboards/gh60/keymaps/robotmaxtron/readme.md
deleted file mode 100644
index 8db7b3f65..000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/readme.md
+++ /dev/null
@@ -1,16 +0,0 @@
-robotmaxtron's GH60 Layout
-=====================
-
-##Quantum MK Firmware
-For the full Quantum feature list, see the parent readme.md.
-
-* Standard ANSI layout with Pok3r styled function layers
-* ESC key led enables when on function layer
-* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer
-* Neopixel/WS2812 RGB Underglow Support
-
-## Reference Images
-![Wiring Refererence](https://i.imgur.com/BkJ39JD.jpg)
-
-### Additional Credits
-Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
diff --git a/keyboards/gh60/keymaps/robotmaxtron/rules.mk b/keyboards/gh60/keymaps/robotmaxtron/rules.mk
deleted file mode 100644
index b6761ac9f..000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/rules.mk
+++ /dev/null
@@ -1,107 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes		# Console for debug(+400)
-# COMMAND_ENABLE = yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE = YES		# MIDI controls
-# UNICODE_ENABLE = YES		# Unicode
-# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
-
diff --git a/keyboards/gh60/keymaps/sethbc/keymap.c b/keyboards/gh60/keymaps/sethbc/keymap.c
deleted file mode 100644
index 6c2c00ec2..000000000
--- a/keyboards/gh60/keymaps/sethbc/keymap.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-  LAYOUT_60_ansi_split_bs_rshift(
-        F(0),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,\
-        KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\
-        KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\
-        KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,F(1),\
-        KC_LCTL,KC_LALT,KC_LGUI,      KC_SPC,            KC_RGUI,KC_RALT,KC_APP,KC_RCTL),
-    /* 1: fn */
-  LAYOUT_60_ansi_split_bs_rshift(
-        KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_TRNS,KC_TRNS,\
-        KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,\
-        KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_PENT,\
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END,KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS,\
-        KC_TRNS,KC_TRNS,KC_TRNS,      KC_TRNS,           KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-};
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_FUNCTION(SHIFT_ESC),
-    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-void matrix_scan_user(void) {
-
-}
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}
diff --git a/keyboards/gh60/keymaps/sethbc/rules.mk b/keyboards/gh60/keymaps/sethbc/rules.mk
deleted file mode 100644
index e69de29bb..000000000
--- a/keyboards/gh60/keymaps/sethbc/rules.mk
+++ /dev/null
diff --git a/keyboards/gh60/keymaps/xyverz/keymap.c b/keyboards/gh60/keymaps/xyverz/keymap.c
deleted file mode 100644
index e47fcc2f9..000000000
--- a/keyboards/gh60/keymaps/xyverz/keymap.c
+++ /dev/null
@@ -1,142 +0,0 @@
-#include QMK_KEYBOARD_H
-
-
-extern keymap_config_t keymap_config;
-
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QW 0
-#define _DV 1
-#define _CM 2
-#define _FL 3
-
-// Macro name shortcuts
-#define QWERTY M(_QW)
-#define DVORAK M(_DV)
-#define COLEMAK M(_CM)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  /*
-   *  _QW: Qwerty Layer
-   * ,-----------------------------------------------------------.
-   * |ESC | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Backsp|
-   * |-----------------------------------------------------------|
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-   * |-----------------------------------------------------------|
-   * |Fn     |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return|
-   * |-----------------------------------------------------------|
-   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|     Shift|
-   * |-----------------------------------------------------------|
-   * |Ctrl|Alt |Gui |      Space             |Gui |Alt |Ctrl|  Fn|
-   * `-----------------------------------------------------------'
-   */
-  /* Layer 0: Qwerty */
-  [_QW] = LAYOUT_60_ansi(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
-    MO(_FL), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT ,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                                      KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)
-  ),
-
-  /*
-   *  _DV: Dvorak Layer
-   * ,-----------------------------------------------------------.
-   * |ESC | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  [|  ]| Backsp|
-   * |-----------------------------------------------------------|
-   * |Tab  |  '|  ,|  .|  P|  Y|  F|  G|  C|  R|  L|  /|  =|    \|
-   * |-----------------------------------------------------------|
-   * |Fn     |  A|  O|  E|  U|  I|  D|  H|  T|  N|  S|  -| Return|
-   * |-----------------------------------------------------------|
-   * |Shift   |  ;|  Q|  J|  K|  X|  B|  M|  W|  V|  Z|     Shift|
-   * |-----------------------------------------------------------|
-   * |Ctrl|Alt |Gui |      Space             |Gui |Alt |Ctrl|  Fn|
-   * `-----------------------------------------------------------'
-   */
-  /* Layer 1: Dvorak */
-  [_DV] = LAYOUT_60_ansi(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, KC_BSPC,
-    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS,
-    MO(_FL), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,          KC_ENT,
-    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,                      KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                                      KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)
-  ),
-
-  /*
-   *  _CM: Colemak Layer
-   * ,-----------------------------------------------------------.
-   * |ESC | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Backsp|
-   * |-----------------------------------------------------------|
-   * |Tab  |  Q|  W|  F|  P|  G|  J|  L|  U|  Y|  ;|  [|  ]|    \|
-   * |-----------------------------------------------------------|
-   * |Fn     |  A|  R|  S|  T|  D|  H|  N|  E|  I|  O|  '| Return|
-   * |-----------------------------------------------------------|
-   * |Shift   |  Z|  X|  C|  V|  B|  K|  M|  ,|  .|  /|     Shift|
-   * |-----------------------------------------------------------|
-   * |Ctrl|Alt |Gui |      Space             |Gui |Alt |Ctrl|  Fn|
-   * `-----------------------------------------------------------'
-   */
-  /* Layer 2: Colemak */
-  [_CM] = LAYOUT_60_ansi(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS,
-    MO(_FL), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,          KC_ENT,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT,
-    KC_LCTL, KC_LALT, KC_LGUI,                   KC_SPC,                                      KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)
-  ),
-
-  /*
-   *  _FL: Function Layer
-   * ,-----------------------------------------------------------.
-   * |    |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|    Del|
-   * |-----------------------------------------------------------|
-   * |     |   |   |   |   |   |   |PgU| Up|PgD|PSc|SLk|Pau|     |
-   * |-----------------------------------------------------------|
-   * |       |   |MPr|MPl|MNx|   |Hom| Lt| Dn| Rt|   |   |       |
-   * |-----------------------------------------------------------|
-   * |CAPS    |   |Mut|VlD|VlU|   |End|   |   |   |   |          |
-   * |-----------------------------------------------------------|
-   * |_QW |_DV |_CM |                        |    |    |    |    |
-   * `-----------------------------------------------------------'
-   */
-  /* Layer 3: Functions */
-  [_FL] = LAYOUT_60_ansi(
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL ,
-    _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP,   KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
-    _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,          _______,
-    KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_END,  _______, _______, _______, _______,                   _______,
-    QWERTY,  DVORAK,  COLEMAK,                   _______,                                     _______, _______, _______, _______
-  ),
-
-};
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case _DV:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_DV);
-          }
-          break;
-        case _QW:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_QW);
-          }
-          break;
-        case _CM:
-          if (record->event.pressed) {
-            persistent_default_layer_set(1UL<<_CM);
-          }
-          break;
-      }
-    return MACRO_NONE;
-};