GH60 Refactor: Move Satan into GH60 directory (#6485)

* Move Satan into the GH60 directory to avoid the confusion of what PCB people have

* set bootmagic to lite

* rename gh60 file to revc

1 files changed, 35 insertions, 0 deletions

diff --git a/keyboards/gh60/satan/readme.md b/keyboards/gh60/satan/readme.md
new file mode 100644
index 000000000..f6a56e4a8
--- /dev/null
+++ b/keyboards/gh60/satan/readme.md
@@ -0,0 +1,35 @@
+# Satan GH60
+
+A clone of the GH60 60% keyboard, with full backlighting support.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Satan GH60 PCB  
+Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make gh60/satan:default
+
+**Note:** This GH60 Satan firmware will not be compatible with the GH60 Rev C PCB. Conversely, the GH60 Rev C firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing. 
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## RGB Underglow (WS2812B LED Strip)
+
+This board also supports underglow with a slight mod.
+
+Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:
+
+![controller](https://i.imgur.com/9vyRBoT.jpg)
+
+Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:
+
+![power](https://i.imgur.com/pHMZHLP.jpg)
+
+## ISP Header
+
+If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:
+
+| 1 |  2 | 3 |  4 |   5 | 6 |  7 |
+|---|----|---|----|-----|---|----|
+|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|