aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/jd45/keymaps
diff options
context:
space:
mode:
authorMichael Terhar <michael.terhar@pararray.com>2017-08-26 23:33:33 -0400
committerJack Humbert <jack.humb@gmail.com>2017-08-26 23:33:33 -0400
commit79603022422cec39ea44686c84a1050acd0c145e (patch)
tree48063d9470a007425500fb8d8c299701e20d63b4 /keyboards/jd45/keymaps
parentde315c54eb244821aef39e75c3f5d1c8e96d1273 (diff)
downloadfirmware-79603022422cec39ea44686c84a1050acd0c145e.tar.gz
firmware-79603022422cec39ea44686c84a1050acd0c145e.tar.bz2
firmware-79603022422cec39ea44686c84a1050acd0c145e.zip
Keymaps for several of my boards (#1641)
* copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
Diffstat (limited to 'keyboards/jd45/keymaps')
-rw-r--r--keyboards/jd45/keymaps/mjt/Makefile21
-rw-r--r--keyboards/jd45/keymaps/mjt/config.h85
-rw-r--r--keyboards/jd45/keymaps/mjt/keymap.c80
-rw-r--r--keyboards/jd45/keymaps/mjt/readme.md12
-rw-r--r--keyboards/jd45/keymaps/mjt/rules.mk67
-rw-r--r--keyboards/jd45/keymaps/mjt6u/Makefile23
-rw-r--r--keyboards/jd45/keymaps/mjt6u/config.h84
-rw-r--r--keyboards/jd45/keymaps/mjt6u/keymap.c149
-rw-r--r--keyboards/jd45/keymaps/mjt6u/readme.md23
9 files changed, 544 insertions, 0 deletions
diff --git a/keyboards/jd45/keymaps/mjt/Makefile b/keyboards/jd45/keymaps/mjt/Makefile
new file mode 100644
index 000000000..c92000665
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/jd45/keymaps/mjt/config.h b/keyboards/jd45/keymaps/mjt/config.h
new file mode 100644
index 000000000..276639514
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt/config.h
@@ -0,0 +1,85 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT JD45
+#define DESCRIPTION q.m.k. keyboard firmware for JD45
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
+#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+#define USB_MAX_POWER_CONSUMPTION 50
+#define BACKLIGHT_BREATHING
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/jd45/keymaps/mjt/keymap.c b/keyboards/jd45/keymaps/mjt/keymap.c
new file mode 100644
index 000000000..1a7302216
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt/keymap.c
@@ -0,0 +1,80 @@
+#include "jd45.h"
+
+/* Mike's Layout for JD45 with backlight LEDs acting as layer indicator
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+ TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, BSLS,
+ FN1, A, S, D, F, G, H, J, K, L, QUOT, ENT,
+ FN0, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
+ NO, LCTL, LALT, LGUI, SPC, BSPC, APP, FN2, ESC, NO ),
+[1] = KEYMAP(
+GRV, TRNS, UP, TRNS, 7, 8, 9, 0, MINS, EQL, PSCR, LBRC, RBRC,
+TRNS, LEFT, DOWN, RGHT, 4, 5, 6, INS, HOME, PGUP, SCLN, TRNS,
+TRNS, TRNS, TRNS, TRNS, 1, 2, 3, DEL, END, PGDN, TRNS, TRNS,
+TRNS, TRNS, TRNS, SPC, TRNS, DEL, TRNS, FN3, TRNS, TRNS ),
+[2] = KEYMAP(
+TRNS, TRNS, VOLU, TRNS, F7, F8, F9, F10, F11, F12, PSCR, FN3, FN4,
+TRNS, MPRV, VOLD, MNXT, F4, F5, F6, J, K, L, SCLN, TRNS,
+TRNS, TRNS, TRNS, TRNS, F1, F2, F3, MUTE, MPRV, MNXT, MSTP, TRNS,
+TRNS, TRNS, TRNS, LGUI, TRNS, TRNS, TRNS, TRNS, PAUS, TRNS )
+/* ,
+[3] = KEYMAP(
+TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+TRNS, TRNS, TRNS, TRNS, TRNS, BTLD, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS )*/
+};
+
+enum macro_id {
+ M_LAYER1,
+ M_LAYER2
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_MODS_TAP_TOGGLE(MOD_LSFT),
+ // [1] = ACTION_LAYER_TAP_TOGGLE(1),
+ [1] = ACTION_MACRO(M_LAYER1),
+ [2] = ACTION_LAYER_TAP_TOGGLE(2),
+ [3] = ACTION_BACKLIGHT_STEP(),
+ [4] = ACTION_BACKLIGHT_TOGGLE()
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case M_LAYER1:
+ // need to add a timer for doubletap: https://github.com/jackhumbert/qmk_firmware/wiki#timer-functionality
+ // action_function_tap may also handle this...
+ if (record->event.pressed)
+ {
+ breathing_speed_set(3);
+ breathing_enable();
+ layer_on(1);
+ }
+ else
+ {
+ breathing_speed_set(1);
+ breathing_self_disable();
+ layer_off(1);
+ }
+ break;
+ case M_LAYER2:
+ if (record->event.pressed)
+ {
+ breathing_speed_set(2);
+ breathing_pulse();
+ layer_on(2);
+ }
+ else
+ {
+ breathing_speed_set(1);
+ breathing_self_disable();
+ layer_off(2);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
diff --git a/keyboards/jd45/keymaps/mjt/readme.md b/keyboards/jd45/keymaps/mjt/readme.md
new file mode 100644
index 000000000..54bdb8346
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt/readme.md
@@ -0,0 +1,12 @@
+# Mike's JD45 standard layout
+
+- Backlight that matches active layer
+- Works with iPhone Camera Adapter
+
+## Layers
+
+Base for letters and mods.
+
+Function 1 layer adds a centered numpad to the board
+
+Function 2 layer replaces the numpad numbers with Fkeys.
diff --git a/keyboards/jd45/keymaps/mjt/rules.mk b/keyboards/jd45/keymaps/mjt/rules.mk
new file mode 100644
index 000000000..6eec21160
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt/rules.mk
@@ -0,0 +1,67 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+# UNICODE_ENABLE = YES # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/jd45/keymaps/mjt6u/Makefile b/keyboards/jd45/keymaps/mjt6u/Makefile
new file mode 100644
index 000000000..f9cec3b84
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/Makefile
@@ -0,0 +1,23 @@
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+DEBUG_ENABLE = yes
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/jd45/keymaps/mjt6u/config.h b/keyboards/jd45/keymaps/mjt6u/config.h
new file mode 100644
index 000000000..bf9dc6df3
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/config.h
@@ -0,0 +1,84 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT JD45
+#define DESCRIPTION q.m.k. keyboard firmware for JD45
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
+#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+#define USB_MAX_POWER_CONSUMPTION 50
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/jd45/keymaps/mjt6u/keymap.c b/keyboards/jd45/keymaps/mjt6u/keymap.c
new file mode 100644
index 000000000..44f0c31db
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/keymap.c
@@ -0,0 +1,149 @@
+#include "jd45.h"
+
+enum jd45_layers
+{
+ _QWERTY,
+ _QWERTYNUMMODS,
+ _NUMSYM,
+ _FUNCTION,
+ _NUMPAD,
+ _FKEYNUMPAD,
+ _ADJUST
+};
+
+enum jd45_keycodes
+{
+ NUMSYM = SAFE_RANGE,
+ MACSLEEP,
+ USEFNMODS,
+ USENUMMODS,
+ DYNAMIC_MACRO_RANGE,
+};
+
+#include "dynamic_macro.h"
+
+#define LONGPRESS_DELAY 150
+#define LAYER_TOGGLE_DELAY 900
+
+#define _______ KC_TRNS
+#define __MOD__ KC_TRNS
+#define XXXXXXX KC_NO
+#define F_FNSPC F(0)
+#define F_NUMSPC F(1)
+#define F_FNTAB F(2)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = {
+ {F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC},
+ {CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
+ { XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_FNSPC, XXXXXXX, XXXXXXX, MO(_FUNCTION), MO(_ADJUST) }
+},
+[_QWERTYNUMMODS] = {
+ {F_FNTAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_BSPC},
+ {CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_ADJUST, KC_QUOT)},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)},
+ {XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, F_NUMSPC, XXXXXXX, XXXXXXX, MO(_FKEYNUMPAD), MO(_ADJUST) }
+},
+[_NUMSYM] = {
+{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_DEL},
+ {__MOD__, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______},
+ {_______, _______, _______, _______, _______, KC_SPC, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, _______},
+{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
+},
+[_FUNCTION] = {
+{__MOD__, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+{__MOD__, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, _______, _______},
+{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+{XXXXXXX, __MOD__, __MOD__, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__ , __MOD__}
+},
+[_NUMPAD] = {
+{KC_GRV, _______, KC_UP, _______, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PSCR, KC_LBRC, KC_RBRC},
+{_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_4, KC_5, KC_6, KC_INS, KC_HOME, KC_PGUP, _______, _______},
+{_______, _______, _______, _______, KC_1, KC_2, KC_3, KC_DEL, KC_END, KC_PGDN, _______, _______},
+{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
+},
+[_FKEYNUMPAD] = {
+{_______, _______, KC_VOLU, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, _______, _______},
+{_______, KC_MPRV, KC_VOLD, KC_MNXT, KC_F4, KC_F5, KC_F6, KC_J, KC_K, KC_L, KC_SCLN, _______},
+{_______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_MUTE, KC_MPRV, KC_MNXT, KC_MSTP, _______},
+{XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__ }
+},
+[_ADJUST] = {
+ {_______, RESET, _______, _______, _______, _______, _______, DYN_REC_START1, DYN_REC_START2, _______, KC_PSCR, _______, _______},
+ { _______, _______, _______, _______, USEFNMODS, _______, _______, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, MACSLEEP, _______, _______},
+ { _______, _______, _______, _______, _______, _______, USENUMMODS, _______, _______, _______, _______, _______},
+ {XXXXXXX, _______, _______,XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, __MOD__, __MOD__}
+ }
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(_NUMSYM, KC_SPC),
+ [1] = ACTION_LAYER_TAP_KEY(_NUMPAD, KC_SPC),
+ [2] = ACTION_LAYER_TAP_KEY(_FUNCTION, KC_TAB),
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+static bool singular_key = false;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ uint16_t macro_kc = (keycode == MO(_ADJUST) ? DYN_REC_STOP : keycode);
+ if (!process_record_dynamic_macro(macro_kc, record)) {
+ return false;
+ }
+ println(" ");
+ print("process record");
+
+ switch (keycode) {
+ case MACSLEEP:
+ if (record->event.pressed) {
+ // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER);
+ register_code(KC_RSFT);
+ register_code(KC_RCTL);
+ register_code(KC_POWER);
+ unregister_code(KC_POWER);
+ unregister_code(KC_RCTL);
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ case USEFNMODS:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_fnpc, false, 0);
+ #endif
+ print("Space-FN");
+ }
+ return false;
+ break;
+ case USENUMMODS:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTYNUMMODS);
+ #ifdef AUDIO_ENABLE
+ PLAY_NOTE_ARRAY(tone_fnmac, false, 0);
+ #endif
+ print("Space-Numpad");
+ }
+ return false;
+ break;
+ default:
+ singular_key = false;
+ break;
+ }
+
+ return true;
+};
+
+
+void matrix_init_user(void) {
+ #ifdef AUDIO_ENABLE
+ startup_user();
+ #endif
+ // debug_enable = true;
+}
diff --git a/keyboards/jd45/keymaps/mjt6u/readme.md b/keyboards/jd45/keymaps/mjt6u/readme.md
new file mode 100644
index 000000000..a43ddf5fc
--- /dev/null
+++ b/keyboards/jd45/keymaps/mjt6u/readme.md
@@ -0,0 +1,23 @@
+# Mike's JD45 with 6u Spacebar
+
+- Early draft of numsym that misses a lot of symbols
+- Numpad layer available for evaluation
+- Works with iPhone Camera Adapter
+- Dynamic macros
+
+## Layers
+
+Qwerty for letters and mods.
+
+Qwertymods layer switches some Modifiers around
+
+Numsym puts the number keys across the top row like a Planck. Arrows are on hjkl
+which makes the other NumSym dynamic from my other boards fall apart
+
+Function layer replaces the top row numbers with Fkeys.
+
+Numpad layer makes a number pad in the center.
+
+Fkeynumpad replaces the numpad numbers with Fkeys.
+
+Adjust layer has macros and configuration.