diff options
author | Mathias Andersson <wraul@dbox.se> | 2019-05-28 19:57:17 +0200 |
---|---|---|
committer | Drashna Jaelre <drashna@live.com> | 2019-05-28 10:57:17 -0700 |
commit | 7a7e3848c75536463fd5fea44620c3eb8085cc91 (patch) | |
tree | 8287d6f7111177f7641d6ac8e5ee4b24d8feccb5 /keyboards/moon/rules.mk | |
parent | b0532c433edbe9419048882c1f14e0b54cd4e2b0 (diff) | |
download | firmware-7a7e3848c75536463fd5fea44620c3eb8085cc91.tar.gz firmware-7a7e3848c75536463fd5fea44620c3eb8085cc91.tar.bz2 firmware-7a7e3848c75536463fd5fea44620c3eb8085cc91.zip |
[Keyboard] Add keyboard Moon (#5976)
Diffstat (limited to 'keyboards/moon/rules.mk')
-rw-r--r-- | keyboards/moon/rules.mk | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/keyboards/moon/rules.mk b/keyboards/moon/rules.mk new file mode 100644 index 000000000..699fc3395 --- /dev/null +++ b/keyboards/moon/rules.mk @@ -0,0 +1,77 @@ +# Project specific files +SRC += i2c_master.c pca9555.c matrix.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# Supported layouts +LAYOUTS = tkl_ansi tkl_iso + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +CUSTOM_MATRIX = yes |