diff options
author | coderkun <olli@coderkun.de> | 2017-05-06 12:19:45 +0200 |
---|---|---|
committer | coderkun <olli@coderkun.de> | 2017-05-06 12:19:45 +0200 |
commit | 49046f621bc8304c8c7ba7a065d2568f45ecc616 (patch) | |
tree | 4a1fc5d37e012502ff4732c801381eec814a2e01 /keyboards/s60_x/rules.mk | |
parent | 9e7448ea89a1a88317f0acb805819af79d0a76e3 (diff) | |
parent | c5cef025ec39e67408f000825747d88c6aaa86eb (diff) | |
download | firmware-49046f621bc8304c8c7ba7a065d2568f45ecc616.tar.gz firmware-49046f621bc8304c8c7ba7a065d2568f45ecc616.tar.bz2 firmware-49046f621bc8304c8c7ba7a065d2568f45ecc616.zip |
Merge tag '0.5.43' into coderkun_neo2
Diffstat (limited to 'keyboards/s60_x/rules.mk')
-rw-r--r-- | keyboards/s60_x/rules.mk | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/keyboards/s60_x/rules.mk b/keyboards/s60_x/rules.mk new file mode 100644 index 000000000..0c568efe9 --- /dev/null +++ b/keyboards/s60_x/rules.mk @@ -0,0 +1,65 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6
\ No newline at end of file |