[Keyboard] Added wilba.tech WT60-C (#9025)

9 files changed, 297 insertions, 0 deletions

diff --git a/keyboards/wilba_tech/wt60_c/config.h b/keyboards/wilba_tech/wt60_c/config.h
new file mode 100644
index 000000000..44491e128
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/config.h
@@ -0,0 +1,119 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x60C0 // 60-C
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT60-C
+#define DESCRIPTION     wilba.tech WT60-C
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for WT60-BX specifics
+// Note: WT60-C is the same RGB matrix as WT60-BX
+#define RGB_BACKLIGHT_WT60_BX
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_WT60_BX defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
+
+// VIA lighting is handled by the keyboard-level code
+#define VIA_CUSTOM_LIGHTING_ENABLE
diff --git a/keyboards/wilba_tech/wt60_c/info.json b/keyboards/wilba_tech/wt60_c/info.json
new file mode 100644
index 000000000..9567d517e
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "wilba.tech WT60-C",
+    "url": "https://wilba.tech",
+    "maintainer": "Wilba",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt60_c/keymaps/default/keymap.c b/keyboards/wilba_tech/wt60_c/keymaps/default/keymap.c
new file mode 100644
index 000000000..cba25bb8f
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+// Default layout for WT60-C
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_all(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23, KC_RCTL),
+
+[1] = LAYOUT_all(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+[2] = LAYOUT_all(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+[3] = LAYOUT_all(
+	KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
diff --git a/keyboards/wilba_tech/wt60_c/keymaps/via/keymap.c b/keyboards/wilba_tech/wt60_c/keymaps/via/keymap.c
new file mode 100644
index 000000000..cba25bb8f
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/keymaps/via/keymap.c
@@ -0,0 +1,34 @@
+// Default layout for WT60-C
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = LAYOUT_all(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23, KC_RCTL),
+
+[1] = LAYOUT_all(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+[2] = LAYOUT_all(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+[3] = LAYOUT_all(
+	KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
diff --git a/keyboards/wilba_tech/wt60_c/keymaps/via/rules.mk b/keyboards/wilba_tech/wt60_c/keymaps/via/rules.mk
new file mode 100644
index 000000000..1e5b99807
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt60_c/readme.md b/keyboards/wilba_tech/wt60_c/readme.md
new file mode 100644
index 000000000..ea72c1cd0
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/readme.md
@@ -0,0 +1,13 @@
+# wilba.tech WT60-C
+
+WT60-C is a keyboard PCB supporting 60% layout. [More info at wilba.tech](https://wilba.tech/)
+
+* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+* Hardware Supported: wilba.tech WT60-C
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt60_c:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt60_c/rules.mk b/keyboards/wilba_tech/wt60_c/rules.mk
new file mode 100644
index 000000000..50faab968
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/rules.mk
@@ -0,0 +1,46 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CIE1931_CURVE = yes
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		drivers/avr/i2c_master.c
diff --git a/keyboards/wilba_tech/wt60_c/wt60_c.c b/keyboards/wilba_tech/wt60_c/wt60_c.c
new file mode 100644
index 000000000..9b1cfe46e
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/wt60_c.c
@@ -0,0 +1 @@
+#include "wt60_c.h"
diff --git a/keyboards/wilba_tech/wt60_c/wt60_c.h b/keyboards/wilba_tech/wt60_c/wt60_c.h
new file mode 100644
index 000000000..2b5fe7fe1
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_c/wt60_c.h
@@ -0,0 +1,37 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "via.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+    K400, K401, K402,                         K407,                   K411, K412, K413        \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+    { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+    { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413 }  \
+}