diff options
author | tmk <hasu@tmk-kbd.com> | 2015-05-13 11:13:10 +0900 |
---|---|---|
committer | tmk <hasu@tmk-kbd.com> | 2015-05-13 11:13:10 +0900 |
commit | f1f2066657f4a0998adc016c95d7e541b436e09f (patch) | |
tree | d056cb656b538c4f3a3c205363e0070976655e2e /tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPP/SPP.ino | |
parent | 1c73e574f109a17566db99e399bdf86007488d2a (diff) | |
parent | f6d56675f9f981c5464f0ca7a1fbb0162154e8c5 (diff) | |
download | firmware-f1f2066657f4a0998adc016c95d7e541b436e09f.tar.gz firmware-f1f2066657f4a0998adc016c95d7e541b436e09f.tar.bz2 firmware-f1f2066657f4a0998adc016c95d7e541b436e09f.zip |
Merge commit 'f6d56675f9f981c5464f0ca7a1fbb0162154e8c5'
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPP/SPP.ino')
m--------- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 | 0 | ||||
-rw-r--r-- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPP/SPP.ino | 52 |
2 files changed, 52 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0 deleted file mode 160000 -Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4 diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPP/SPP.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPP/SPP.ino new file mode 100644 index 000000000..8fb9c4eca --- /dev/null +++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPP/SPP.ino @@ -0,0 +1,52 @@ +/* + Example sketch for the RFCOMM/SPP Bluetooth library - developed by Kristian Lauszus + For more information visit my blog: http://blog.tkjelectronics.dk/ or + send me an e-mail: kristianl@tkjelectronics.com + */ + +#include <SPP.h> +#include <usbhub.h> + +// Satisfy the IDE, which needs to see the include statment in the ino too. +#ifdef dobogusinclude +#include <spi4teensy3.h> +#include <SPI.h> +#endif + +USB Usb; +//USBHub Hub1(&Usb); // Some dongles have a hub inside + +BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so +/* You can create the instance of the class in two ways */ +SPP SerialBT(&Btd); // This will set the name to the defaults: "Arduino" and the pin to "0000" +//SPP SerialBT(&Btd, "Lauszus's Arduino", "1234"); // You can also set the name and pin like so + +bool firstMessage = true; + +void setup() { + Serial.begin(115200); +#if !defined(__MIPSEL__) + while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection +#endif + if (Usb.Init() == -1) { + Serial.print(F("\r\nOSC did not start")); + while (1); //halt + } + Serial.print(F("\r\nSPP Bluetooth Library Started")); +} +void loop() { + Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well + + if (SerialBT.connected) { + if (firstMessage) { + firstMessage = false; + SerialBT.println(F("Hello from Arduino")); // Send welcome message + } + if (Serial.available()) + SerialBT.write(Serial.read()); + if (SerialBT.available()) + Serial.write(SerialBT.read()); + } + else + firstMessage = true; +} |