aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--keyboards/clueboard/clueboard.c1
-rw-r--r--keyboards/clueboard_17/Makefile3
-rw-r--r--keyboards/clueboard_17/clueboard_17.c (renamed from keyboards/cluepad/cluepad.c)2
-rw-r--r--keyboards/clueboard_17/clueboard_17.h (renamed from keyboards/cluepad/cluepad.h)0
-rw-r--r--keyboards/clueboard_17/config.h (renamed from keyboards/cluepad/config.h)0
-rw-r--r--keyboards/clueboard_17/keymaps/default/keymap.c (renamed from keyboards/cluepad/keymaps/default/keymap.c)2
-rw-r--r--keyboards/clueboard_17/readme.md (renamed from keyboards/cluepad/readme.md)0
-rw-r--r--keyboards/clueboard_17/rules.mk (renamed from keyboards/cluepad/rules.mk)0
-rw-r--r--keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.c124
-rw-r--r--keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.h1187
-rw-r--r--keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.mk5
-rw-r--r--keyboards/clueboard_60/bootloader_defs.h7
-rw-r--r--keyboards/clueboard_60/chconf.h520
-rw-r--r--keyboards/clueboard_60/clueboard_60.c24
-rw-r--r--keyboards/clueboard_60/clueboard_60.h105
-rw-r--r--keyboards/clueboard_60/config.h133
-rw-r--r--keyboards/clueboard_60/halconf.h388
-rw-r--r--keyboards/clueboard_60/keymaps/default/keymap.c43
-rw-r--r--keyboards/clueboard_60/keymaps/default/readme.md1
-rw-r--r--keyboards/clueboard_60/keymaps/default_aek/keymap.c43
-rw-r--r--keyboards/clueboard_60/keymaps/default_aek/readme.md1
-rw-r--r--keyboards/clueboard_60/led.c58
-rw-r--r--keyboards/clueboard_60/matrix.c177
-rw-r--r--keyboards/clueboard_60/mcuconf.h257
-rw-r--r--keyboards/clueboard_60/readme.md14
-rw-r--r--keyboards/clueboard_60/rules.mk54
-rw-r--r--keyboards/clueboard_66/Makefile5
-rw-r--r--keyboards/clueboard_66/clueboard_66.c1
-rw-r--r--keyboards/clueboard_66/clueboard_66.h (renamed from keyboards/clueboard/clueboard.h)0
-rw-r--r--keyboards/clueboard_66/config.h (renamed from keyboards/clueboard/config.h)0
-rw-r--r--keyboards/clueboard_66/keymaps/bloodlvst/Makefile (renamed from keyboards/clueboard/keymaps/bloodlvst/rules.mk)0
-rw-r--r--keyboards/clueboard_66/keymaps/bloodlvst/config.h (renamed from keyboards/clueboard/keymaps/bloodlvst/config.h)0
-rw-r--r--keyboards/clueboard_66/keymaps/bloodlvst/keymap.c (renamed from keyboards/clueboard/keymaps/bloodlvst/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/bloodlvst/readme.md (renamed from keyboards/clueboard/keymaps/bloodlvst/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/bloodlvst/rules.mk2
-rw-r--r--keyboards/clueboard_66/keymaps/caps_fn/keymap.c (renamed from keyboards/clueboard/keymaps/caps_fn/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/caps_fn/readme.md (renamed from keyboards/clueboard/keymaps/caps_fn/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/colemak/keymap.c (renamed from keyboards/clueboard/keymaps/colemak/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/default/keymap.c (renamed from keyboards/clueboard/keymaps/default/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/default/readme.md (renamed from keyboards/clueboard/keymaps/default/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/jokrik/keymap.c (renamed from keyboards/clueboard/keymaps/jokrik/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/jokrik/readme.md (renamed from keyboards/clueboard/keymaps/jokrik/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/mac_optimized/keymap.c (renamed from keyboards/clueboard/keymaps/mac_optimized/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/mac_optimized/readme.md (renamed from keyboards/clueboard/keymaps/mac_optimized/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/magicmonty/Makefile (renamed from keyboards/clueboard/keymaps/magicmonty/rules.mk)0
-rw-r--r--keyboards/clueboard_66/keymaps/magicmonty/config.h (renamed from keyboards/clueboard/keymaps/magicmonty/config.h)0
-rw-r--r--keyboards/clueboard_66/keymaps/magicmonty/keymap.c (renamed from keyboards/clueboard/keymaps/magicmonty/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/magicmonty/readme.md (renamed from keyboards/clueboard/keymaps/magicmonty/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/magicmonty/rules.mk9
-rw-r--r--keyboards/clueboard_66/keymaps/maximised/keymap.c (renamed from keyboards/clueboard/keymaps/maximised/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/maximised/readme.md (renamed from keyboards/clueboard/keymaps/maximised/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/mouse_keys/Makefile (renamed from keyboards/clueboard/keymaps/mouse_keys/rules.mk)0
-rw-r--r--keyboards/clueboard_66/keymaps/mouse_keys/keymap.c (renamed from keyboards/clueboard/keymaps/mouse_keys/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/mouse_keys/readme.md (renamed from keyboards/clueboard/keymaps/mouse_keys/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/mouse_keys/rules.mk1
-rw-r--r--keyboards/clueboard_66/keymaps/serubin/Makefile (renamed from keyboards/clueboard/keymaps/serubin/rules.mk)0
-rw-r--r--keyboards/clueboard_66/keymaps/serubin/keymap.c (renamed from keyboards/clueboard/keymaps/serubin/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/serubin/readme.md (renamed from keyboards/clueboard/keymaps/serubin/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/serubin/rules.mk4
-rw-r--r--keyboards/clueboard_66/keymaps/shift_fn/keymap.c (renamed from keyboards/clueboard/keymaps/shift_fn/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/shift_fn/readme.md (renamed from keyboards/clueboard/keymaps/shift_fn/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/skully/keymap.c (renamed from keyboards/clueboard/keymaps/skully/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/skully/readme.md (renamed from keyboards/clueboard/keymaps/skully/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/smt/keymap.c (renamed from keyboards/clueboard/keymaps/smt/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/smt/readme.md (renamed from keyboards/clueboard/keymaps/smt/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/tetris/Makefile (renamed from keyboards/clueboard/keymaps/tetris/rules.mk)0
-rw-r--r--keyboards/clueboard_66/keymaps/tetris/keymap.c (renamed from keyboards/clueboard/keymaps/tetris/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/tetris/readme.md (renamed from keyboards/clueboard/keymaps/tetris/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/tetris/rules.mk1
-rw-r--r--keyboards/clueboard_66/keymaps/tetris/tetris_text.c (renamed from keyboards/clueboard/keymaps/tetris/tetris_text.c)0
-rw-r--r--keyboards/clueboard_66/keymaps/tetris/tetris_text.h (renamed from keyboards/clueboard/keymaps/tetris/tetris_text.h)0
-rw-r--r--keyboards/clueboard_66/keymaps/unix_optimized/keymap.c (renamed from keyboards/clueboard/keymaps/unix_optimized/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/unix_optimized/readme.md (renamed from keyboards/clueboard/keymaps/unix_optimized/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/win_optimized/keymap.c (renamed from keyboards/clueboard/keymaps/win_optimized/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/win_optimized/readme.md (renamed from keyboards/clueboard/keymaps/win_optimized/readme.md)0
-rw-r--r--keyboards/clueboard_66/keymaps/xyverz/Makefile (renamed from keyboards/clueboard/keymaps/xyverz/rules.mk)0
-rw-r--r--keyboards/clueboard_66/keymaps/xyverz/keymap.c (renamed from keyboards/clueboard/keymaps/xyverz/keymap.c)2
-rw-r--r--keyboards/clueboard_66/keymaps/xyverz/rules.mk49
-rw-r--r--keyboards/clueboard_66/readme.md (renamed from keyboards/clueboard/readme.md)0
-rw-r--r--keyboards/clueboard_66/rev1/Makefile3
-rw-r--r--keyboards/clueboard_66/rev1/config.h (renamed from keyboards/clueboard/rev1/config.h)0
-rw-r--r--keyboards/clueboard_66/rev1/rev1.c (renamed from keyboards/clueboard/rev1/rev1.c)0
-rw-r--r--keyboards/clueboard_66/rev1/rev1.h (renamed from keyboards/clueboard/rev1/rev1.h)2
-rw-r--r--keyboards/clueboard_66/rev1/rules.mk (renamed from keyboards/clueboard/rev1/rules.mk)0
-rw-r--r--keyboards/clueboard_66/rev2/Makefile3
-rw-r--r--keyboards/clueboard_66/rev2/config.h (renamed from keyboards/clueboard/rev2/config.h)0
-rw-r--r--keyboards/clueboard_66/rev2/rev2.c (renamed from keyboards/clueboard/rev2/rev2.c)0
-rw-r--r--keyboards/clueboard_66/rev2/rev2.h (renamed from keyboards/clueboard/rev2/rev2.h)2
-rw-r--r--keyboards/clueboard_66/rev2/rules.mk (renamed from keyboards/clueboard/rev2/rules.mk)0
-rw-r--r--keyboards/clueboard_66/rev3/config.h (renamed from keyboards/clueboard/rev3/config.h)0
-rw-r--r--keyboards/clueboard_66/rev3/rev3.c (renamed from keyboards/clueboard/rev3/rev3.c)0
-rw-r--r--keyboards/clueboard_66/rev3/rev3.h (renamed from keyboards/clueboard/rev3/rev3.h)2
-rw-r--r--keyboards/clueboard_66/rev3/rules.mk (renamed from keyboards/clueboard/rev3/rules.mk)0
-rw-r--r--keyboards/clueboard_66/rules.mk (renamed from keyboards/clueboard/rules.mk)0
-rw-r--r--keyboards/clueboard_66/subproject.mk (renamed from keyboards/clueboard/subproject.mk)0
-rw-r--r--keyboards/gh60/gh60.h24
-rw-r--r--keyboards/satan/satan.h18
-rw-r--r--layouts/community/60_iso/unxmaal/keymap.c48
-rw-r--r--layouts/community/60_iso/unxmaal/rules.mk5
-rw-r--r--layouts/default/60_ansi/default_60_ansi/keymap.c2
-rw-r--r--layouts/default/60_iso/default_60_iso/keymap.c10
-rw-r--r--quantum/audio/audio.c8
-rw-r--r--quantum/audio/audio.h7
-rw-r--r--quantum/audio/audio_arm.c606
-rw-r--r--quantum/audio/luts.c3
-rw-r--r--quantum/audio/luts.h11
-rw-r--r--quantum/audio/voices.h6
-rw-r--r--tmk_core/chibios.mk4
-rw-r--r--tmk_core/common/chibios/bootloader.c18
-rw-r--r--tmk_core/common/chibios/suspend.c5
-rw-r--r--tmk_core/common/wait.h11
-rw-r--r--tmk_core/protocol/chibios/main.c32
-rw-r--r--tmk_core/protocol/chibios/usb_main.c21
-rw-r--r--tmk_core/rules.mk2
114 files changed, 4005 insertions, 103 deletions
diff --git a/keyboards/clueboard/clueboard.c b/keyboards/clueboard/clueboard.c
deleted file mode 100644
index 3435202ba..000000000
--- a/keyboards/clueboard/clueboard.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "clueboard.h"
diff --git a/keyboards/clueboard_17/Makefile b/keyboards/clueboard_17/Makefile
new file mode 100644
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/clueboard_17/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/cluepad/cluepad.c b/keyboards/clueboard_17/clueboard_17.c
index 1867b617f..04cc81217 100644
--- a/keyboards/cluepad/cluepad.c
+++ b/keyboards/clueboard_17/clueboard_17.c
@@ -1,4 +1,4 @@
-#include "cluepad.h"
+#include "clueboard_17.h"
int pwm_level;
diff --git a/keyboards/cluepad/cluepad.h b/keyboards/clueboard_17/clueboard_17.h
index 5e4a5999e..5e4a5999e 100644
--- a/keyboards/cluepad/cluepad.h
+++ b/keyboards/clueboard_17/clueboard_17.h
diff --git a/keyboards/cluepad/config.h b/keyboards/clueboard_17/config.h
index bd64dfd27..bd64dfd27 100644
--- a/keyboards/cluepad/config.h
+++ b/keyboards/clueboard_17/config.h
diff --git a/keyboards/cluepad/keymaps/default/keymap.c b/keyboards/clueboard_17/keymaps/default/keymap.c
index 66827fe48..7a0d51851 100644
--- a/keyboards/cluepad/keymaps/default/keymap.c
+++ b/keyboards/clueboard_17/keymaps/default/keymap.c
@@ -1,4 +1,4 @@
-#include "cluepad.h"
+#include "clueboard_17.h"
#include "backlight.h"
diff --git a/keyboards/cluepad/readme.md b/keyboards/clueboard_17/readme.md
index f79d6b559..f79d6b559 100644
--- a/keyboards/cluepad/readme.md
+++ b/keyboards/clueboard_17/readme.md
diff --git a/keyboards/cluepad/rules.mk b/keyboards/clueboard_17/rules.mk
index 264aba044..264aba044 100644
--- a/keyboards/cluepad/rules.mk
+++ b/keyboards/clueboard_17/rules.mk
diff --git a/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.c b/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.c
new file mode 100644
index 000000000..897f20a88
--- /dev/null
+++ b/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.c
@@ -0,0 +1,124 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+ {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+ VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+ {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+ VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+ {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+ VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+ {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+ VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+ {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+ VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+ {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+ VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+ {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+ VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+ {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+ VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+ {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+/**
+ * @brief Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ * and before any other initialization.
+ */
+void __early_init(void) {
+
+ stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif
+
+/**
+ * @brief Board-specific initialization code.
+ * @todo Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.h b/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.h
new file mode 100644
index 000000000..145d569f0
--- /dev/null
+++ b/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.h
@@ -0,0 +1,1187 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for Clueboard 60% Keyboard
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F303XC
+#define BOARD_NAME "Clueboard 60 PCB"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK 0U
+#endif
+
+#define STM32_LSEDRV (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK 8000000U
+#endif
+
+// #define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F303xC
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_PIN0 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_PIN5 5U
+#define GPIOA_PIN6 6U
+#define GPIOA_PIN7 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_USB_DM 11U
+#define GPIOA_USB_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_PIN3 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_PIN13 13U
+#define GPIOB_PIN14 14U
+#define GPIOB_PIN15 15U
+
+#define GPIOC_PIN0 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_PIN6 6U
+#define GPIOC_PIN7 7U
+#define GPIOC_PIN8 8U
+#define GPIOC_PIN9 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_PIN14 14U
+#define GPIOC_PIN15 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_I2C2_SDA 0U
+#define GPIOF_I2C2_SCL 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+#define GPIOG_PIN0 0U
+#define GPIOG_PIN1 1U
+#define GPIOG_PIN2 2U
+#define GPIOG_PIN3 3U
+#define GPIOG_PIN4 4U
+#define GPIOG_PIN5 5U
+#define GPIOG_PIN6 6U
+#define GPIOG_PIN7 7U
+#define GPIOG_PIN8 8U
+#define GPIOG_PIN9 9U
+#define GPIOG_PIN10 10U
+#define GPIOG_PIN11 11U
+#define GPIOG_PIN12 12U
+#define GPIOG_PIN13 13U
+#define GPIOG_PIN14 14U
+#define GPIOG_PIN15 15U
+
+#define GPIOH_PIN0 0U
+#define GPIOH_PIN1 1U
+#define GPIOH_PIN2 2U
+#define GPIOH_PIN3 3U
+#define GPIOH_PIN4 4U
+#define GPIOH_PIN5 5U
+#define GPIOH_PIN6 6U
+#define GPIOH_PIN7 7U
+#define GPIOH_PIN8 8U
+#define GPIOH_PIN9 9U
+#define GPIOH_PIN10 10U
+#define GPIOH_PIN11 11U
+#define GPIOH_PIN12 12U
+#define GPIOH_PIN13 13U
+#define GPIOH_PIN14 14U
+#define GPIOH_PIN15 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
+#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
+
+#define LINE_PIN6 PAL_LINE(GPIOF, 0U)
+#define LINE_PIN7 PAL_LINE(GPIOF, 1U)
+
+#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U)
+
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0 - NC
+ * PA1 - NC
+ * PA2 - COL1
+ * PA3 - COL2
+ * PA4 - SPEAKER1
+ * PA5 - SPEAKER2
+ * PA6 - COL3
+ * PA7 - COL8
+ * PA8 - COL6
+ * PA9 - COL7
+ * PA10 - ROW5
+ * PA11 - USB_DM (alternate 14).
+ * PA12 - USB_DP (alternate 14).
+ * PA13 - SWDIO (alternate 0).
+ * PA14 - SWCLK (alternate 0).
+ * PA15 - ROW4
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \
+ PIN_MODE_INPUT(GPIOA_PIN1) | \
+ PIN_MODE_INPUT(GPIOA_PIN2) | \
+ PIN_MODE_INPUT(GPIOA_PIN3) | \
+ PIN_MODE_INPUT(GPIOA_PIN4) | \
+ PIN_MODE_INPUT(GPIOA_PIN5) | \
+ PIN_MODE_INPUT(GPIOA_PIN6) | \
+ PIN_MODE_INPUT(GPIOA_PIN7) | \
+ PIN_MODE_INPUT(GPIOA_PIN8) | \
+ PIN_MODE_INPUT(GPIOA_PIN9) | \
+ PIN_MODE_INPUT(GPIOA_PIN10) | \
+ PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
+ PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOA_USB_DM) | \
+ PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
+ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
+ PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
+ PIN_PUPDR_FLOATING(GPIOA_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
+ PIN_PUPDR_FLOATING(GPIOA_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
+ PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
+ PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \
+ PIN_ODR_HIGH(GPIOA_PIN1) | \
+ PIN_ODR_HIGH(GPIOA_PIN2) | \
+ PIN_ODR_HIGH(GPIOA_PIN3) | \
+ PIN_ODR_HIGH(GPIOA_PIN4) | \
+ PIN_ODR_HIGH(GPIOA_PIN5) | \
+ PIN_ODR_HIGH(GPIOA_PIN6) | \
+ PIN_ODR_HIGH(GPIOA_PIN7) | \
+ PIN_ODR_HIGH(GPIOA_PIN8) | \
+ PIN_ODR_HIGH(GPIOA_PIN9) | \
+ PIN_ODR_HIGH(GPIOA_PIN10) | \
+ PIN_ODR_HIGH(GPIOA_USB_DM) | \
+ PIN_ODR_HIGH(GPIOA_USB_DP) | \
+ PIN_ODR_HIGH(GPIOA_SWDIO) | \
+ PIN_ODR_HIGH(GPIOA_SWCLK) | \
+ PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN5, 5) | \
+ PIN_AFIO_AF(GPIOA_PIN6, 5) | \
+ PIN_AFIO_AF(GPIOA_PIN7, 5))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
+ PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN15, 0))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0 - PIN0 (input pullup).
+ * PB1 - PIN1 (input pullup).
+ * PB2 - PIN2 (input pullup).
+ * PB3 - PIN3 (alternate 0).
+ * PB4 - PIN4 (input pullup).
+ * PB5 - PIN5 (input pullup).
+ * PB6 - PIN6 LSM303DLHC_SCL (alternate 4).
+ * PB7 - PIN7 LSM303DLHC_SDA (alternate 4).
+ * PB8 - PIN8 (input pullup).
+ * PB9 - PIN9 (input pullup).
+ * PB10 - PIN10 (input pullup).
+ * PB11 - PIN11 (input pullup).
+ * PB12 - PIN12 (input pullup).
+ * PB13 - PIN13 (input pullup).
+ * PB14 - PIN14 (input pullup).
+ * PB15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_ALTERNATE(GPIOB_PIN3) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_ALTERNATE(GPIOB_PIN6) | \
+ PIN_MODE_OUTPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_PIN9) | \
+ PIN_MODE_INPUT(GPIOB_PIN10) | \
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_INPUT(GPIOB_PIN13) | \
+ PIN_MODE_INPUT(GPIOB_PIN14) | \
+ PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
+ PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_FLOATING(GPIOB_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_FLOATING(GPIOB_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
+ PIN_ODR_HIGH(GPIOB_PIN1) | \
+ PIN_ODR_HIGH(GPIOB_PIN2) | \
+ PIN_ODR_HIGH(GPIOB_PIN3) | \
+ PIN_ODR_HIGH(GPIOB_PIN4) | \
+ PIN_ODR_HIGH(GPIOB_PIN5) | \
+ PIN_ODR_HIGH(GPIOB_PIN6) | \
+ PIN_ODR_HIGH(GPIOB_PIN7) | \
+ PIN_ODR_HIGH(GPIOB_PIN8) | \
+ PIN_ODR_HIGH(GPIOB_PIN9) | \
+ PIN_ODR_HIGH(GPIOB_PIN10) | \
+ PIN_ODR_HIGH(GPIOB_PIN11) | \
+ PIN_ODR_HIGH(GPIOB_PIN12) | \
+ PIN_ODR_HIGH(GPIOB_PIN13) | \
+ PIN_ODR_HIGH(GPIOB_PIN14) | \
+ PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN6, 4) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN15, 0))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0 - PIN0 (input pullup).
+ * PC1 - PIN1 (input pullup).
+ * PC2 - PIN2 (input pullup).
+ * PC3 - PIN3 (input pullup).
+ * PC4 - PIN4 (input pullup).
+ * PC5 - PIN5 (input pullup).
+ * PC6 - PIN6 (input pullup).
+ * PC7 - PIN7 (input pullup).
+ * PC8 - PIN8 (input pullup).
+ * PC9 - PIN9 (input pullup).
+ * PC10 - PIN10 (input pullup).
+ * PC11 - PIN11 (input pullup).
+ * PC12 - PIN12 (input pullup).
+ * PC13 - PIN13 (input pullup).
+ * PC14 - PIN14 (input floating).
+ * PC15 - PIN15 (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
+ PIN_MODE_INPUT(GPIOC_PIN1) | \
+ PIN_MODE_INPUT(GPIOC_PIN2) | \
+ PIN_MODE_INPUT(GPIOC_PIN3) | \
+ PIN_MODE_INPUT(GPIOC_PIN4) | \
+ PIN_MODE_INPUT(GPIOC_PIN5) | \
+ PIN_MODE_INPUT(GPIOC_PIN6) | \
+ PIN_MODE_INPUT(GPIOC_PIN7) | \
+ PIN_MODE_INPUT(GPIOC_PIN8) | \
+ PIN_MODE_INPUT(GPIOC_PIN9) | \
+ PIN_MODE_INPUT(GPIOC_PIN10) | \
+ PIN_MODE_INPUT(GPIOC_PIN11) | \
+ PIN_MODE_INPUT(GPIOC_PIN12) | \
+ PIN_MODE_INPUT(GPIOC_PIN13) | \
+ PIN_MODE_INPUT(GPIOC_PIN14) | \
+ PIN_MODE_INPUT(GPIOC_PIN15))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOC_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOC_PIN14) | \
+ PIN_PUPDR_FLOATING(GPIOC_PIN15))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
+ PIN_ODR_HIGH(GPIOC_PIN1) | \
+ PIN_ODR_HIGH(GPIOC_PIN2) | \
+ PIN_ODR_HIGH(GPIOC_PIN3) | \
+ PIN_ODR_HIGH(GPIOC_PIN4) | \
+ PIN_ODR_HIGH(GPIOC_PIN5) | \
+ PIN_ODR_HIGH(GPIOC_PIN6) | \
+ PIN_ODR_HIGH(GPIOC_PIN7) | \
+ PIN_ODR_HIGH(GPIOC_PIN8) | \
+ PIN_ODR_HIGH(GPIOC_PIN9) | \
+ PIN_ODR_HIGH(GPIOC_PIN10) | \
+ PIN_ODR_HIGH(GPIOC_PIN11) | \
+ PIN_ODR_HIGH(GPIOC_PIN12) | \
+ PIN_ODR_HIGH(GPIOC_PIN13) | \
+ PIN_ODR_HIGH(GPIOC_PIN14) | \
+ PIN_ODR_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN7, 0))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN15, 0))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0 - PIN0 (input pullup).
+ * PD1 - PIN1 (input pullup).
+ * PD2 - PIN2 (input pullup).
+ * PD3 - PIN3 (input pullup).
+ * PD4 - PIN4 (input pullup).
+ * PD5 - PIN5 (input pullup).
+ * PD6 - PIN6 (input pullup).
+ * PD7 - PIN7 (input pullup).
+ * PD8 - PIN8 (input pullup).
+ * PD9 - PIN9 (input pullup).
+ * PD11 - PIN10 (input pullup).
+ * PD11 - PIN11 (input pullup).
+ * PD12 - PIN12 (input pullup).
+ * PD13 - PIN13 (input pullup).
+ * PD14 - PIN14 (input pullup).
+ * PD15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
+ PIN_MODE_INPUT(GPIOD_PIN1) | \
+ PIN_MODE_INPUT(GPIOD_PIN2) | \
+ PIN_MODE_INPUT(GPIOD_PIN3) | \
+ PIN_MODE_INPUT(GPIOD_PIN4) | \
+ PIN_MODE_INPUT(GPIOD_PIN5) | \
+ PIN_MODE_INPUT(GPIOD_PIN6) | \
+ PIN_MODE_INPUT(GPIOD_PIN7) | \
+ PIN_MODE_INPUT(GPIOD_PIN8) | \
+ PIN_MODE_INPUT(GPIOD_PIN9) | \
+ PIN_MODE_INPUT(GPIOD_PIN10) | \
+ PIN_MODE_INPUT(GPIOD_PIN11) | \
+ PIN_MODE_INPUT(GPIOD_PIN12) | \
+ PIN_MODE_INPUT(GPIOD_PIN13) | \
+ PIN_MODE_INPUT(GPIOD_PIN14) | \
+ PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
+ PIN_ODR_HIGH(GPIOD_PIN1) | \
+ PIN_ODR_HIGH(GPIOD_PIN2) | \
+ PIN_ODR_HIGH(GPIOD_PIN3) | \
+ PIN_ODR_HIGH(GPIOD_PIN4) | \
+ PIN_ODR_HIGH(GPIOD_PIN5) | \
+ PIN_ODR_HIGH(GPIOD_PIN6) | \
+ PIN_ODR_HIGH(GPIOD_PIN7) | \
+ PIN_ODR_HIGH(GPIOD_PIN8) | \
+ PIN_ODR_HIGH(GPIOD_PIN9) | \
+ PIN_ODR_HIGH(GPIOD_PIN10) | \
+ PIN_ODR_HIGH(GPIOD_PIN11) | \
+ PIN_ODR_HIGH(GPIOD_PIN12) | \
+ PIN_ODR_HIGH(GPIOD_PIN13) | \
+ PIN_ODR_HIGH(GPIOD_PIN14) | \
+ PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN7, 0))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN15, 0))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0 - PIN0 (input pullup).
+ * PE1 - PIN1 (input pullup).
+ * PE2 - PIN2 (input pullup).
+ * PE3 - PIN3 L3GD20_CS (output pushpull maximum).
+ * PE4 - PIN4 (input pullup).
+ * PE5 - PIN5 (input pullup).
+ * PE6 - PIN6 (input pullup).
+ * PE7 - PIN7 (input pullup).
+ * PE8 - PIN8 (output pushpull maximum).
+ * PE9 - PIN9 (output pushpull maximum).
+ * PE10 - PIN10 (output pushpull maximum).
+ * PE11 - PIN11 (output pushpull maximum).
+ * PE12 - PIN12 (output pushpull maximum).
+ * PE13 - PIN13 (output pushpull maximum).
+ * PE14 - PIN14 (output pushpull maximum).
+ * PE15 - PIN15 (output pushpull maximum).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
+ PIN_MODE_INPUT(GPIOE_PIN1) | \
+ PIN_MODE_INPUT(GPIOE_PIN2) |\
+ PIN_MODE_OUTPUT(GPIOE_PIN3) | \
+ PIN_MODE_INPUT(GPIOE_PIN4) |\
+ PIN_MODE_INPUT(GPIOE_PIN5) |\
+ PIN_MODE_INPUT(GPIOE_PIN6) | \
+ PIN_MODE_INPUT(GPIOE_PIN7) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN8) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN9) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN10) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN11) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN12) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN13) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN14) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\
+ PIN_OSPEED_HIGH(GPIOE_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN2) |\
+ PIN_PUPDR_FLOATING(GPIOE_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN4) |\
+ PIN_PUPDR_PULLUP(GPIOE_PIN5) |\
+ PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN14) |\
+ PIN_PUPDR_FLOATING(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
+ PIN_ODR_HIGH(GPIOE_PIN1) | \
+ PIN_ODR_HIGH(GPIOE_PIN2) | \
+ PIN_ODR_HIGH(GPIOE_PIN3) | \
+ PIN_ODR_HIGH(GPIOE_PIN4) | \
+ PIN_ODR_HIGH(GPIOE_PIN5) | \
+ PIN_ODR_HIGH(GPIOE_PIN6) | \
+ PIN_ODR_HIGH(GPIOE_PIN7) | \
+ PIN_ODR_LOW(GPIOE_PIN8) | \
+ PIN_ODR_LOW(GPIOE_PIN9) | \
+ PIN_ODR_LOW(GPIOE_PIN10) | \
+ PIN_ODR_LOW(GPIOE_PIN11) | \
+ PIN_ODR_LOW(GPIOE_PIN12) | \
+ PIN_ODR_LOW(GPIOE_PIN13) | \
+ PIN_ODR_LOW(GPIOE_PIN14) | \
+ PIN_ODR_LOW(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN2, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN4, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN5, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN7, 0))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN15, 0))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0 - I2C2_SDA (input floating).
+ * PF1 - I2C2_SCL (input floating).
+ * PF2 - PIN2 (input pullup).
+ * PF3 - PIN3 (input pullup).
+ * PF4 - PIN4 (input pullup).
+ * PF5 - PIN5 (input pullup).
+ * PF6 - PIN6 (input pullup).
+ * PF7 - PIN7 (input pullup).
+ * PF8 - PIN8 (input pullup).
+ * PF9 - PIN9 (input pullup).
+ * PF10 - PIN10 (input pullup).
+ * PF11 - PIN11 (input pullup).
+ * PF12 - PIN12 (input pullup).
+ * PF13 - PIN13 (input pullup).
+ * PF14 - PIN14 (input pullup).
+ * PF15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \
+ PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \
+ PIN_MODE_INPUT(GPIOF_PIN2) | \
+ PIN_MODE_INPUT(GPIOF_PIN3) | \
+ PIN_MODE_INPUT(GPIOF_PIN4) | \
+ PIN_MODE_INPUT(GPIOF_PIN5) | \
+ PIN_MODE_INPUT(GPIOF_PIN6) | \
+ PIN_MODE_INPUT(GPIOF_PIN7) | \
+ PIN_MODE_INPUT(GPIOF_PIN8) | \
+ PIN_MODE_INPUT(GPIOF_PIN9) | \
+ PIN_MODE_INPUT(GPIOF_PIN10) | \
+ PIN_MODE_INPUT(GPIOF_PIN11) | \
+ PIN_MODE_INPUT(GPIOF_PIN12) | \
+ PIN_MODE_INPUT(GPIOF_PIN13) | \
+ PIN_MODE_INPUT(GPIOF_PIN14) | \
+ PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \
+ PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \
+ PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \
+ PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \
+ PIN_ODR_HIGH(GPIOF_PIN2) | \
+ PIN_ODR_HIGH(GPIOF_PIN3) | \
+ PIN_ODR_HIGH(GPIOF_PIN4) | \
+ PIN_ODR_HIGH(GPIOF_PIN5) | \
+ PIN_ODR_HIGH(GPIOF_PIN6) | \
+ PIN_ODR_HIGH(GPIOF_PIN7) | \
+ PIN_ODR_HIGH(GPIOF_PIN8) | \
+ PIN_ODR_HIGH(GPIOF_PIN9) | \
+ PIN_ODR_HIGH(GPIOF_PIN10) | \
+ PIN_ODR_HIGH(GPIOF_PIN11) | \
+ PIN_ODR_HIGH(GPIOF_PIN12) | \
+ PIN_ODR_HIGH(GPIOF_PIN13) | \
+ PIN_ODR_HIGH(GPIOF_PIN14) | \
+ PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \
+ PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN7, 0))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN15, 0))
+
+/*
+ * GPIOG setup:
+ *
+ * PG0 - PIN0 (input pullup).
+ * PG1 - PIN1 (input pullup).
+ * PG2 - PIN2 (input pullup).
+ * PG3 - PIN3 (input pullup).
+ * PG4 - PIN4 (input pullup).
+ * PG5 - PIN5 (input pullup).
+ * PG6 - PIN6 (input pullup).
+ * PG7 - PIN7 (input pullup).
+ * PG8 - PIN8 (input pullup).
+ * PG9 - PIN9 (input pullup).
+ * PG10 - PIN10 (input pullup).
+ * PG11 - PIN11 (input pullup).
+ * PG12 - PIN12 (input pullup).
+ * PG13 - PIN13 (input pullup).
+ * PG14 - PIN14 (input pullup).
+ * PG15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
+ PIN_MODE_INPUT(GPIOG_PIN1) | \
+ PIN_MODE_INPUT(GPIOG_PIN2) | \
+ PIN_MODE_INPUT(GPIOG_PIN3) | \
+ PIN_MODE_INPUT(GPIOG_PIN4) | \
+ PIN_MODE_INPUT(GPIOG_PIN5) | \
+ PIN_MODE_INPUT(GPIOG_PIN6) | \
+ PIN_MODE_INPUT(GPIOG_PIN7) | \
+ PIN_MODE_INPUT(GPIOG_PIN8) | \
+ PIN_MODE_INPUT(GPIOG_PIN9) | \
+ PIN_MODE_INPUT(GPIOG_PIN10) | \
+ PIN_MODE_INPUT(GPIOG_PIN11) | \
+ PIN_MODE_INPUT(GPIOG_PIN12) | \
+ PIN_MODE_INPUT(GPIOG_PIN13) | \
+ PIN_MODE_INPUT(GPIOG_PIN14) | \
+ PIN_MODE_INPUT(GPIOG_PIN15))
+#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
+#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN15))
+#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN15))
+#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
+ PIN_ODR_HIGH(GPIOG_PIN1) | \
+ PIN_ODR_HIGH(GPIOG_PIN2) | \
+ PIN_ODR_HIGH(GPIOG_PIN3) | \
+ PIN_ODR_HIGH(GPIOG_PIN4) | \
+ PIN_ODR_HIGH(GPIOG_PIN5) | \
+ PIN_ODR_HIGH(GPIOG_PIN6) | \
+ PIN_ODR_HIGH(GPIOG_PIN7) | \
+ PIN_ODR_HIGH(GPIOG_PIN8) | \
+ PIN_ODR_HIGH(GPIOG_PIN9) | \
+ PIN_ODR_HIGH(GPIOG_PIN10) | \
+ PIN_ODR_HIGH(GPIOG_PIN11) | \
+ PIN_ODR_HIGH(GPIOG_PIN12) | \
+ PIN_ODR_HIGH(GPIOG_PIN13) | \
+ PIN_ODR_HIGH(GPIOG_PIN14) | \
+ PIN_ODR_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN7, 0))
+#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN15, 0))
+
+/*
+ * GPIOH setup:
+ *
+ * PH0 - PIN0 (input pullup).
+ * PH1 - PIN1 (input pullup).
+ * PH2 - PIN2 (input pullup).
+ * PH3 - PIN3 (input pullup).
+ * PH4 - PIN4 (input pullup).
+ * PH5 - PIN5 (input pullup).
+ * PH6 - PIN6 (input pullup).
+ * PH7 - PIN7 (input pullup).
+ * PH8 - PIN8 (input pullup).
+ * PH9 - PIN9 (input pullup).
+ * PH10 - PIN10 (input pullup).
+ * PH11 - PIN11 (input pullup).
+ * PH12 - PIN12 (input pullup).
+ * PH13 - PIN13 (input pullup).
+ * PH14 - PIN14 (input pullup).
+ * PH15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \
+ PIN_MODE_INPUT(GPIOH_PIN1) | \
+ PIN_MODE_INPUT(GPIOH_PIN2) | \
+ PIN_MODE_INPUT(GPIOH_PIN3) | \
+ PIN_MODE_INPUT(GPIOH_PIN4) | \
+ PIN_MODE_INPUT(GPIOH_PIN5) | \
+ PIN_MODE_INPUT(GPIOH_PIN6) | \
+ PIN_MODE_INPUT(GPIOH_PIN7) | \
+ PIN_MODE_INPUT(GPIOH_PIN8) | \
+ PIN_MODE_INPUT(GPIOH_PIN9) | \
+ PIN_MODE_INPUT(GPIOH_PIN10) | \
+ PIN_MODE_INPUT(GPIOH_PIN11) | \
+ PIN_MODE_INPUT(GPIOH_PIN12) | \
+ PIN_MODE_INPUT(GPIOH_PIN13) | \
+ PIN_MODE_INPUT(GPIOH_PIN14) | \
+ PIN_MODE_INPUT(GPIOH_PIN15))
+#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
+#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN15))
+#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN15))
+#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \
+ PIN_ODR_HIGH(GPIOH_PIN1) | \
+ PIN_ODR_HIGH(GPIOH_PIN2) | \
+ PIN_ODR_HIGH(GPIOH_PIN3) | \
+ PIN_ODR_HIGH(GPIOH_PIN4) | \
+ PIN_ODR_HIGH(GPIOH_PIN5) | \
+ PIN_ODR_HIGH(GPIOH_PIN6) | \
+ PIN_ODR_HIGH(GPIOH_PIN7) | \
+ PIN_ODR_HIGH(GPIOH_PIN8) | \
+ PIN_ODR_HIGH(GPIOH_PIN9) | \
+ PIN_ODR_HIGH(GPIOH_PIN10) | \
+ PIN_ODR_HIGH(GPIOH_PIN11) | \
+ PIN_ODR_HIGH(GPIOH_PIN12) | \
+ PIN_ODR_HIGH(GPIOH_PIN13) | \
+ PIN_ODR_HIGH(GPIOH_PIN14) | \
+ PIN_ODR_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN7, 0))
+#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN15, 0))
+
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+// #define usb_lld_connect_bus(usbp)
+#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
+// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+// #define usb_lld_disconnect_bus(usbp)
+#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL))
+// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.mk
new file mode 100644
index 000000000..9674228c3
--- /dev/null
+++ b/keyboards/clueboard_60/boards/GENERIC_STM32_F303XC/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F303XC
diff --git a/keyboards/clueboard_60/bootloader_defs.h b/keyboards/clueboard_60/bootloader_defs.h
new file mode 100644
index 000000000..3b0e9d20a
--- /dev/null
+++ b/keyboards/clueboard_60/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/keyboards/clueboard_60/chconf.h b/keyboards/clueboard_60/chconf.h
new file mode 100644
index 000000000..5a9b83310
--- /dev/null
+++ b/keyboards/clueboard_60/chconf.h
@@ -0,0 +1,520 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/clueboard_60/clueboard_60.c b/keyboards/clueboard_60/clueboard_60.c
new file mode 100644
index 000000000..a0b74db72
--- /dev/null
+++ b/keyboards/clueboard_60/clueboard_60.c
@@ -0,0 +1,24 @@
+/* Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "clueboard_60.h"
+
+void matrix_init_kb(void) {
+
+}
+
+void matrix_scan_kb(void) {
+
+}
diff --git a/keyboards/clueboard_60/clueboard_60.h b/keyboards/clueboard_60/clueboard_60.h
new file mode 100644
index 000000000..ffff18f9e
--- /dev/null
+++ b/keyboards/clueboard_60/clueboard_60.h
@@ -0,0 +1,105 @@
+/* Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef CLUEBOARD60_H
+#define CLUEBOARD60_H
+
+#include "quantum.h"
+
+/*
+ * These are shortcuts to help you work with the various layout options. If your
+ * keymap works with one of the LAYOUT_...() macros you are encouraged to use that
+ * and to contribute your keymap to the corresponding layout in
+ * `qmk_firmware/layouts/community`.
+ */
+
+/* The fully-featured KEYMAP() that has every single key available in the matrix.
+ */
+#define KEYMAP(\
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4e \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO, k2e, }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, k3e, }, \
+ { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \
+}
+
+/* A layout that matches the Apple Extended Keyboard's main area. No split keys,
+ * 3 mods on either side of the spacebar.
+ */
+#define KEYMAP_AEK(\
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k47, k4b, k4c, k4e \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \
+ { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \
+ { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k4b, k4c, KC_NO, k4e, }, \
+}
+
+/* Standard 60% ANSI layout */
+#define LAYOUT_60_ansi(\
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4e \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \
+ { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \
+ { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \
+}
+
+/* Standard 60% ISO layout */
+#define LAYOUT_60_iso(\
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4e \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, KC_NO, }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO, k2e, }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \
+ { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \
+}
+
+/* Split Backspace and Right Shift ANSI layout. */
+#define LAYOUT_60_ansi_split_bs_rshift(\
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \
+ k40, k41, k42, k47, k4a, k4b, k4c, k4e \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \
+ { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, k3e, }, \
+ { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \
+}
+#endif
diff --git a/keyboards/clueboard_60/config.h b/keyboards/clueboard_60/config.h
new file mode 100644
index 000000000..333698a08
--- /dev/null
+++ b/keyboards/clueboard_60/config.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xC1ED
+#define PRODUCT_ID 0x2350
+#define DEVICE_VER 0x0001
+#define MANUFACTURER "Clueboard"
+#define USBSTR_MANUFACTURER 'C', '\x00', 'l', '\x00', 'u', '\x00', 'e', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00'
+#define PRODUCT "Clueboard60"
+#define USBSTR_PRODUCT 'C', '\x00', 'l', '\x00', 'u', '\x00', 'e', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', ' ', '\x00', '6', '\x00', '0', '\x00', '%', '\x00'
+#define DESCRIPTION "Clueboard 60%"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+/* Note: These are not used for arm boards. They're here purely as documentation.
+ * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 }
+ * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
+ * #define UNUSED_PINS
+ */
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Prevent modifiers from being stuck on after layer changes. */
+#define PREVENT_STUCK_MODIFIERS
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
+
+ /* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
diff --git a/keyboards/clueboard_60/halconf.h b/keyboards/clueboard_60/halconf.h
new file mode 100644
index 000000000..254470cbd
--- /dev/null
+++ b/keyboards/clueboard_60/halconf.h
@@ -0,0 +1,388 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC TRUE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT TRUE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/clueboard_60/keymaps/default/keymap.c b/keyboards/clueboard_60/keymaps/default/keymap.c
new file mode 100644
index 000000000..e662057f0
--- /dev/null
+++ b/keyboards/clueboard_60/keymaps/default/keymap.c
@@ -0,0 +1,43 @@
+#include "clueboard_60.h"
+
+#define _______ KC_TRNS
+
+enum keyboard_layers {
+ _BL,
+ _FL,
+ _CL
+};
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ * |-----------------------------------------------------------|
+ * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0|
+ * |-----------------------------------------------------------'
+ * |Ctrl |Gui|Alt | Space |Alt |Gui|Fn |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ [_BL] = KEYMAP(
+ KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL),
+ [_FL] = KEYMAP(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,\
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, MO(_FL), _______),
+ [_CL] = KEYMAP(
+ BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\
+ _______, _______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______, _______, _______, _______, _______, MO(_FL), _______)
+};
diff --git a/keyboards/clueboard_60/keymaps/default/readme.md b/keyboards/clueboard_60/keymaps/default/readme.md
new file mode 100644
index 000000000..32d4bfba6
--- /dev/null
+++ b/keyboards/clueboard_60/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for clueboard 60%
diff --git a/keyboards/clueboard_60/keymaps/default_aek/keymap.c b/keyboards/clueboard_60/keymaps/default_aek/keymap.c
new file mode 100644
index 000000000..d2d3db772
--- /dev/null
+++ b/keyboards/clueboard_60/keymaps/default_aek/keymap.c
@@ -0,0 +1,43 @@
+#include "clueboard_60.h"
+
+#define _______ KC_TRNS
+
+enum keyboard_layers {
+ _BL,
+ _FL,
+ _CL
+};
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BkSp|
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
+ * |-----------------------------------------------------------|
+ * |Capslk| A| S| D| F| G| H| J| K| L| ;| '| Enter|
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift|
+ * |-----------------------------------------------------------'
+ * |Ctrl |Gui|Alt | Space |Alt|Fn |Ctrl |
+ * `-----------------------------------------------------------'
+ */
+ [_BL] = KEYMAP_AEK(
+ KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RCTL),
+ [_FL] = KEYMAP_AEK(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\
+ _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______, _______, _______, _______, MO(_FL), _______),
+ [_CL] = KEYMAP_AEK(
+ BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ _______, _______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______,\
+ _______, _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______, _______, _______, _______, MO(_FL), _______)
+};
diff --git a/keyboards/clueboard_60/keymaps/default_aek/readme.md b/keyboards/clueboard_60/keymaps/default_aek/readme.md
new file mode 100644
index 000000000..cdec24160
--- /dev/null
+++ b/keyboards/clueboard_60/keymaps/default_aek/readme.md
@@ -0,0 +1 @@
+# The default keymap for clueboard 60%, optimized for the AEK layout.
diff --git a/keyboards/clueboard_60/led.c b/keyboards/clueboard_60/led.c
new file mode 100644
index 000000000..fdf244ad5
--- /dev/null
+++ b/keyboards/clueboard_60/led.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "backlight.h"
+#include "led.h"
+#include "printf.h"
+
+void backlight_init_ports(void) {
+ printf("backlight_init_ports()\n");
+ #ifdef BACKLIGHT_ENABLE
+ palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(GPIOB, 8);
+ #endif
+}
+
+void backlight_set(uint8_t level) {
+ printf("backlight_set(%d)\n", level);
+ #ifdef BACKLIGHT_ENABLE
+ if (level == 0) {
+ // Turn backlight off
+ palSetPad(GPIOB, 8);
+ } else {
+ // Turn backlight on
+ palClearPad(GPIOB, 8);
+ }
+ #endif
+}
+
+void led_init_ports() {
+ printf("led_init_ports()\n");
+ palSetPadMode(GPIOB, 7, PAL_MODE_OUTPUT_PUSHPULL);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ printf("led_init_ports()\n");
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ palSetPad(GPIOB, 7);
+ } else {
+ // Turn capslock off
+ palClearPad(GPIOB, 7);
+ }
+}
diff --git a/keyboards/clueboard_60/matrix.c b/keyboards/clueboard_60/matrix.c
new file mode 100644
index 000000000..76a15ca7e
--- /dev/null
+++ b/keyboards/clueboard_60/matrix.c
@@ -0,0 +1,177 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "printf.h"
+#include "backlight.h"
+#include "matrix.h"
+
+
+/* Clueboard 60%
+ *
+ * Column pins are input with internal pull-down.
+ * Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ * col: { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC15, PC14, PC13, PB5, PB6 }
+ * row: { PB0, PB1, PB2, PA15, PA10 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_COLS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+void matrix_init(void) {
+ printf("matrix init\n");
+ //debug_matrix = true;
+
+ /* Column(sense) */
+ palSetPadMode(GPIOA, 2, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOA, 6, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 14, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 15, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOA, 8, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOA, 9, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 4, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 15, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 14, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 5, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 6, PAL_MODE_OUTPUT_PUSHPULL);
+
+ /* Row(strobe) */
+ palSetPadMode(GPIOB, 0, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOB, 1, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOB, 2, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOA, 15, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN);
+
+ memset(matrix, 0, MATRIX_ROWS);
+ memset(matrix_debouncing, 0, MATRIX_COLS);
+
+ /* Setup capslock */
+ // palSetPadMode(GPIOB, 7, PAL_MODE_OUTPUT_PUSHPULL);
+ // palClearPad(GPIOB, 7);
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ matrix_row_t data = 0;
+
+ // strobe col { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
+ switch (col) {
+ case 0: palSetPad(GPIOA, 2); break;
+ case 1: palSetPad(GPIOA, 3); break;
+ case 2: palSetPad(GPIOA, 6); break;
+ case 3: palSetPad(GPIOB, 14); break;
+ case 4: palSetPad(GPIOB, 15); break;
+ case 5: palSetPad(GPIOA, 8); break;
+ case 6: palSetPad(GPIOA, 9); break;
+ case 7: palSetPad(GPIOA, 7); break;
+ case 8: palSetPad(GPIOB, 3); break;
+ case 9: palSetPad(GPIOB, 4); break;
+ case 10: palSetPad(GPIOC, 15); break;
+ case 11: palSetPad(GPIOC, 14); break;
+ case 12: palSetPad(GPIOC, 13); break;
+ case 13: palSetPad(GPIOB, 5); break;
+ case 14: palSetPad(GPIOB, 6); break;
+ }
+
+ // need wait to settle pin state
+ wait_us(20);
+
+ // read row data { PB0, PB1, PB2, PA15, PA10 }
+ data = (
+ (palReadPad(GPIOB, 0) << 0 ) |
+ (palReadPad(GPIOB, 1) << 1 ) |
+ (palReadPad(GPIOB, 2) << 2 ) |
+ (palReadPad(GPIOA, 15) << 3 ) |
+ (palReadPad(GPIOA, 10) << 4 )
+ );
+
+ // unstrobe col { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC15, PC14, PC13, PB5, PB6 }
+ switch (col) {
+ case 0: palClearPad(GPIOA, 2); break;
+ case 1: palClearPad(GPIOA, 3); break;
+ case 2: palClearPad(GPIOA, 6); break;
+ case 3: palClearPad(GPIOB, 14); break;
+ case 4: palClearPad(GPIOB, 15); break;
+ case 5: palClearPad(GPIOA, 8); break;
+ case 6: palClearPad(GPIOA, 9); break;
+ case 7: palClearPad(GPIOA, 7); break;
+ case 8: palClearPad(GPIOB, 3); break;
+ case 9: palClearPad(GPIOB, 4); break;
+ case 10: palClearPad(GPIOC, 15); break;
+ case 11: palClearPad(GPIOC, 14); break;
+ case 12: palClearPad(GPIOC, 13); break;
+ case 13: palClearPad(GPIOB, 5); break;
+ case 14: palClearPad(GPIOB, 6); break;
+ }
+
+ if (matrix_debouncing[col] != data) {
+ matrix_debouncing[col] = data;
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+ }
+ if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ matrix[row] = 0;
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
+ }
+ }
+ debouncing = false;
+ }
+
+ matrix_scan_quantum();
+
+ return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col) {
+ return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+ printf("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ printf("%X0: ", row);
+ matrix_row_t data = matrix_get_row(row);
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ if (data & (1<<col))
+ printf("1");
+ else
+ printf("0");
+ }
+ printf("\n");
+ }
+}
diff --git a/keyboards/clueboard_60/mcuconf.h b/keyboards/clueboard_60/mcuconf.h
new file mode 100644
index 000000000..94cb540ec
--- /dev/null
+++ b/keyboards/clueboard_60/mcuconf.h
@@ -0,0 +1,257 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_USART2SW STM32_USART2SW_PCLK
+#define STM32_USART3SW STM32_USART3SW_PCLK
+#define STM32_UART4SW STM32_UART4SW_PCLK
+#define STM32_UART5SW STM32_UART5SW_PCLK
+#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE FALSE
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_USE_ADC4 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_ADC4_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM6 TRUE
+#define STM32_GPT_USE_TIM7 TRUE
+#define STM32_GPT_USE_TIM8 TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/keyboards/clueboard_60/readme.md b/keyboards/clueboard_60/readme.md
new file mode 100644
index 000000000..b13c5336b
--- /dev/null
+++ b/keyboards/clueboard_60/readme.md
@@ -0,0 +1,14 @@
+# Clueboard 60%
+
+A fully customizable 60% keyboard.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Clueboard 60% PCB
+ * rev1 (1.0)
+* Hardware Availability: [clueboard.co](https://clueboard.co/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make clueboard_60-default-dfu-util
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/clueboard_60/rules.mk b/keyboards/clueboard_60/rules.mk
new file mode 100644
index 000000000..01b7dad9b
--- /dev/null
+++ b/keyboards/clueboard_60/rules.mk
@@ -0,0 +1,54 @@
+# project specific files
+SRC = matrix.c \
+ led.c
+LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000 -R
+
+# Build Options
+# comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
+#AUDIO_ENABLE = yes
+# SERIAL_LINK_ENABLE = yes
diff --git a/keyboards/clueboard_66/Makefile b/keyboards/clueboard_66/Makefile
new file mode 100644
index 000000000..b9bada8f8
--- /dev/null
+++ b/keyboards/clueboard_66/Makefile
@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev2
+
+ifndef MAKEFILE_INCLUDED
+ include ../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/clueboard_66/clueboard_66.c b/keyboards/clueboard_66/clueboard_66.c
new file mode 100644
index 000000000..1e000e62d
--- /dev/null
+++ b/keyboards/clueboard_66/clueboard_66.c
@@ -0,0 +1 @@
+#include "clueboard_66.h"
diff --git a/keyboards/clueboard/clueboard.h b/keyboards/clueboard_66/clueboard_66.h
index 295a596d5..295a596d5 100644
--- a/keyboards/clueboard/clueboard.h
+++ b/keyboards/clueboard_66/clueboard_66.h
diff --git a/keyboards/clueboard/config.h b/keyboards/clueboard_66/config.h
index 0d4e6a874..0d4e6a874 100644
--- a/keyboards/clueboard/config.h
+++ b/keyboards/clueboard_66/config.h
diff --git a/keyboards/clueboard/keymaps/bloodlvst/rules.mk b/keyboards/clueboard_66/keymaps/bloodlvst/Makefile
index b1c2f32f6..b1c2f32f6 100644
--- a/keyboards/clueboard/keymaps/bloodlvst/rules.mk
+++ b/keyboards/clueboard_66/keymaps/bloodlvst/Makefile
diff --git a/keyboards/clueboard/keymaps/bloodlvst/config.h b/keyboards/clueboard_66/keymaps/bloodlvst/config.h
index 320401dbd..320401dbd 100644
--- a/keyboards/clueboard/keymaps/bloodlvst/config.h
+++ b/keyboards/clueboard_66/keymaps/bloodlvst/config.h
diff --git a/keyboards/clueboard/keymaps/bloodlvst/keymap.c b/keyboards/clueboard_66/keymaps/bloodlvst/keymap.c
index bedb658ea..bc50afa2f 100644
--- a/keyboards/clueboard/keymaps/bloodlvst/keymap.c
+++ b/keyboards/clueboard_66/keymaps/bloodlvst/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/bloodlvst/readme.md b/keyboards/clueboard_66/keymaps/bloodlvst/readme.md
index ee287ca47..ee287ca47 100644
--- a/keyboards/clueboard/keymaps/bloodlvst/readme.md
+++ b/keyboards/clueboard_66/keymaps/bloodlvst/readme.md
diff --git a/keyboards/clueboard_66/keymaps/bloodlvst/rules.mk b/keyboards/clueboard_66/keymaps/bloodlvst/rules.mk
new file mode 100644
index 000000000..b1c2f32f6
--- /dev/null
+++ b/keyboards/clueboard_66/keymaps/bloodlvst/rules.mk
@@ -0,0 +1,2 @@
+EXTRAKEY_ENABLE = yes
+COMMAND_ENABLE = no
diff --git a/keyboards/clueboard/keymaps/caps_fn/keymap.c b/keyboards/clueboard_66/keymaps/caps_fn/keymap.c
index 2e54fdba8..78eb43390 100644
--- a/keyboards/clueboard/keymaps/caps_fn/keymap.c
+++ b/keyboards/clueboard_66/keymaps/caps_fn/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/caps_fn/readme.md b/keyboards/clueboard_66/keymaps/caps_fn/readme.md
index 47a530a80..47a530a80 100644
--- a/keyboards/clueboard/keymaps/caps_fn/readme.md
+++ b/keyboards/clueboard_66/keymaps/caps_fn/readme.md
diff --git a/keyboards/clueboard/keymaps/colemak/keymap.c b/keyboards/clueboard_66/keymaps/colemak/keymap.c
index 2ed354186..b2921cca2 100644
--- a/keyboards/clueboard/keymaps/colemak/keymap.c
+++ b/keyboards/clueboard_66/keymaps/colemak/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard_66/keymaps/default/keymap.c
index dbfc04c57..ad623c548 100644
--- a/keyboards/clueboard/keymaps/default/keymap.c
+++ b/keyboards/clueboard_66/keymaps/default/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/default/readme.md b/keyboards/clueboard_66/keymaps/default/readme.md
index 019131aeb..019131aeb 100644
--- a/keyboards/clueboard/keymaps/default/readme.md
+++ b/keyboards/clueboard_66/keymaps/default/readme.md
diff --git a/keyboards/clueboard/keymaps/jokrik/keymap.c b/keyboards/clueboard_66/keymaps/jokrik/keymap.c
index dda6a8b90..dd38e904c 100644
--- a/keyboards/clueboard/keymaps/jokrik/keymap.c
+++ b/keyboards/clueboard_66/keymaps/jokrik/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/jokrik/readme.md b/keyboards/clueboard_66/keymaps/jokrik/readme.md
index a845e65f1..a845e65f1 100644
--- a/keyboards/clueboard/keymaps/jokrik/readme.md
+++ b/keyboards/clueboard_66/keymaps/jokrik/readme.md
diff --git a/keyboards/clueboard/keymaps/mac_optimized/keymap.c b/keyboards/clueboard_66/keymaps/mac_optimized/keymap.c
index e39edb4d6..8c3568e59 100644
--- a/keyboards/clueboard/keymaps/mac_optimized/keymap.c
+++ b/keyboards/clueboard_66/keymaps/mac_optimized/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/mac_optimized/readme.md b/keyboards/clueboard_66/keymaps/mac_optimized/readme.md
index 282da369d..282da369d 100644
--- a/keyboards/clueboard/keymaps/mac_optimized/readme.md
+++ b/keyboards/clueboard_66/keymaps/mac_optimized/readme.md
diff --git a/keyboards/clueboard/keymaps/magicmonty/rules.mk b/keyboards/clueboard_66/keymaps/magicmonty/Makefile
index 289018f34..289018f34 100644
--- a/keyboards/clueboard/keymaps/magicmonty/rules.mk
+++ b/keyboards/clueboard_66/keymaps/magicmonty/Makefile
diff --git a/keyboards/clueboard/keymaps/magicmonty/config.h b/keyboards/clueboard_66/keymaps/magicmonty/config.h
index d933fa997..d933fa997 100644
--- a/keyboards/clueboard/keymaps/magicmonty/config.h
+++ b/keyboards/clueboard_66/keymaps/magicmonty/config.h
diff --git a/keyboards/clueboard/keymaps/magicmonty/keymap.c b/keyboards/clueboard_66/keymaps/magicmonty/keymap.c
index feef00e7a..6df7d7869 100644
--- a/keyboards/clueboard/keymaps/magicmonty/keymap.c
+++ b/keyboards/clueboard_66/keymaps/magicmonty/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/magicmonty/readme.md b/keyboards/clueboard_66/keymaps/magicmonty/readme.md
index e24212d04..e24212d04 100644
--- a/keyboards/clueboard/keymaps/magicmonty/readme.md
+++ b/keyboards/clueboard_66/keymaps/magicmonty/readme.md
diff --git a/keyboards/clueboard_66/keymaps/magicmonty/rules.mk b/keyboards/clueboard_66/keymaps/magicmonty/rules.mk
new file mode 100644
index 000000000..289018f34
--- /dev/null
+++ b/keyboards/clueboard_66/keymaps/magicmonty/rules.mk
@@ -0,0 +1,9 @@
+
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+
+MIDI_ENABLE = yes
+
+# if MIDI_ENABLE is set to yes, then CONSOLE_ENABLE has to be disabled, because of the firmware size
+CONSOLE_ENABLE = false
+COMMAND_ENABLE = no
diff --git a/keyboards/clueboard/keymaps/maximised/keymap.c b/keyboards/clueboard_66/keymaps/maximised/keymap.c
index 583c52091..260f97477 100644
--- a/keyboards/clueboard/keymaps/maximised/keymap.c
+++ b/keyboards/clueboard_66/keymaps/maximised/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/maximised/readme.md b/keyboards/clueboard_66/keymaps/maximised/readme.md
index fc82e6879..fc82e6879 100644
--- a/keyboards/clueboard/keymaps/maximised/readme.md
+++ b/keyboards/clueboard_66/keymaps/maximised/readme.md
diff --git a/keyboards/clueboard/keymaps/mouse_keys/rules.mk b/keyboards/clueboard_66/keymaps/mouse_keys/Makefile
index 6c605daec..6c605daec 100644
--- a/keyboards/clueboard/keymaps/mouse_keys/rules.mk
+++ b/keyboards/clueboard_66/keymaps/mouse_keys/Makefile
diff --git a/keyboards/clueboard/keymaps/mouse_keys/keymap.c b/keyboards/clueboard_66/keymaps/mouse_keys/keymap.c
index 259fa29b7..15e068aa1 100644
--- a/keyboards/clueboard/keymaps/mouse_keys/keymap.c
+++ b/keyboards/clueboard_66/keymaps/mouse_keys/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/mouse_keys/readme.md b/keyboards/clueboard_66/keymaps/mouse_keys/readme.md
index 7fb038205..7fb038205 100644
--- a/keyboards/clueboard/keymaps/mouse_keys/readme.md
+++ b/keyboards/clueboard_66/keymaps/mouse_keys/readme.md
diff --git a/keyboards/clueboard_66/keymaps/mouse_keys/rules.mk b/keyboards/clueboard_66/keymaps/mouse_keys/rules.mk
new file mode 100644
index 000000000..6c605daec
--- /dev/null
+++ b/keyboards/clueboard_66/keymaps/mouse_keys/rules.mk
@@ -0,0 +1 @@
+MOUSEKEY_ENABLE = yes
diff --git a/keyboards/clueboard/keymaps/serubin/rules.mk b/keyboards/clueboard_66/keymaps/serubin/Makefile
index ba997f869..ba997f869 100644
--- a/keyboards/clueboard/keymaps/serubin/rules.mk
+++ b/keyboards/clueboard_66/keymaps/serubin/Makefile
diff --git a/keyboards/clueboard/keymaps/serubin/keymap.c b/keyboards/clueboard_66/keymaps/serubin/keymap.c
index 4212e6a52..112670d66 100644
--- a/keyboards/clueboard/keymaps/serubin/keymap.c
+++ b/keyboards/clueboard_66/keymaps/serubin/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/serubin/readme.md b/keyboards/clueboard_66/keymaps/serubin/readme.md
index 78eef5352..78eef5352 100644
--- a/keyboards/clueboard/keymaps/serubin/readme.md
+++ b/keyboards/clueboard_66/keymaps/serubin/readme.md
diff --git a/keyboards/clueboard_66/keymaps/serubin/rules.mk b/keyboards/clueboard_66/keymaps/serubin/rules.mk
new file mode 100644
index 000000000..ba997f869
--- /dev/null
+++ b/keyboards/clueboard_66/keymaps/serubin/rules.mk
@@ -0,0 +1,4 @@
+
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+
diff --git a/keyboards/clueboard/keymaps/shift_fn/keymap.c b/keyboards/clueboard_66/keymaps/shift_fn/keymap.c
index be29a0a17..0d57e38a1 100644
--- a/keyboards/clueboard/keymaps/shift_fn/keymap.c
+++ b/keyboards/clueboard_66/keymaps/shift_fn/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/shift_fn/readme.md b/keyboards/clueboard_66/keymaps/shift_fn/readme.md
index 4bd920ad4..4bd920ad4 100644
--- a/keyboards/clueboard/keymaps/shift_fn/readme.md
+++ b/keyboards/clueboard_66/keymaps/shift_fn/readme.md
diff --git a/keyboards/clueboard/keymaps/skully/keymap.c b/keyboards/clueboard_66/keymaps/skully/keymap.c
index 81e47811f..2e23948b2 100644
--- a/keyboards/clueboard/keymaps/skully/keymap.c
+++ b/keyboards/clueboard_66/keymaps/skully/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/skully/readme.md b/keyboards/clueboard_66/keymaps/skully/readme.md
index b9ad1b09a..b9ad1b09a 100644
--- a/keyboards/clueboard/keymaps/skully/readme.md
+++ b/keyboards/clueboard_66/keymaps/skully/readme.md
diff --git a/keyboards/clueboard/keymaps/smt/keymap.c b/keyboards/clueboard_66/keymaps/smt/keymap.c
index 6797faaa3..c61b32f8b 100644
--- a/keyboards/clueboard/keymaps/smt/keymap.c
+++ b/keyboards/clueboard_66/keymaps/smt/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
diff --git a/keyboards/clueboard/keymaps/smt/readme.md b/keyboards/clueboard_66/keymaps/smt/readme.md
index 7fc0f0248..7fc0f0248 100644
--- a/keyboards/clueboard/keymaps/smt/readme.md
+++ b/keyboards/clueboard_66/keymaps/smt/readme.md
diff --git a/keyboards/clueboard/keymaps/tetris/rules.mk b/keyboards/clueboard_66/keymaps/tetris/Makefile
index 461353129..461353129 100644
--- a/keyboards/clueboard/keymaps/tetris/rules.mk
+++ b/keyboards/clueboard_66/keymaps/tetris/Makefile
diff --git a/keyboards/clueboard/keymaps/tetris/keymap.c b/keyboards/clueboard_66/keymaps/tetris/keymap.c
index c5a16b158..4bf2465a9 100644
--- a/keyboards/clueboard/keymaps/tetris/keymap.c
+++ b/keyboards/clueboard_66/keymaps/tetris/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
#include "tetris_text.h"
// Helpful defines
diff --git a/keyboards/clueboard/keymaps/tetris/readme.md b/keyboards/clueboard_66/keymaps/tetris/readme.md
index 20e97fb19..20e97fb19 100644
--- a/keyboards/clueboard/keymaps/tetris/readme.md
+++ b/keyboards/clueboard_66/keymaps/tetris/readme.md
diff --git a/keyboards/clueboard_66/keymaps/tetris/rules.mk b/keyboards/clueboard_66/keymaps/tetris/rules.mk
new file mode 100644
index 000000000..461353129
--- /dev/null
+++ b/keyboards/clueboard_66/keymaps/tetris/rules.mk
@@ -0,0 +1 @@
+SRC = tetris_text.c
diff --git a/keyboards/clueboard/keymaps/tetris/tetris_text.c b/keyboards/clueboard_66/keymaps/tetris/tetris_text.c
index 1376ead00..1376ead00 100644
--- a/keyboards/clueboard/keymaps/tetris/tetris_text.c
+++ b/keyboards/clueboard_66/keymaps/tetris/tetris_text.c
diff --git a/keyboards/clueboard/keymaps/tetris/tetris_text.h b/keyboards/clueboard_66/keymaps/tetris/tetris_text.h
index 25b4177e0..25b4177e0 100644
--- a/keyboards/clueboard/keymaps/tetris/tetris_text.h
+++ b/keyboards/clueboard_66/keymaps/tetris/tetris_text.h
diff --git a/keyboards/clueboard/keymaps/unix_optimized/keymap.c b/keyboards/clueboard_66/keymaps/unix_optimized/keymap.c
index 0de247ca0..dab959bdc 100644
--- a/keyboards/clueboard/keymaps/unix_optimized/keymap.c
+++ b/keyboards/clueboard_66/keymaps/unix_optimized/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/unix_optimized/readme.md b/keyboards/clueboard_66/keymaps/unix_optimized/readme.md
index 9e6d0e902..9e6d0e902 100644
--- a/keyboards/clueboard/keymaps/unix_optimized/readme.md
+++ b/keyboards/clueboard_66/keymaps/unix_optimized/readme.md
diff --git a/keyboards/clueboard/keymaps/win_optimized/keymap.c b/keyboards/clueboard_66/keymaps/win_optimized/keymap.c
index ad02fd59f..fb83aaa24 100644
--- a/keyboards/clueboard/keymaps/win_optimized/keymap.c
+++ b/keyboards/clueboard_66/keymaps/win_optimized/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard.h"
+#include "clueboard_66.h"
// Helpful defines
#define _______ KC_TRNS
diff --git a/keyboards/clueboard/keymaps/win_optimized/readme.md b/keyboards/clueboard_66/keymaps/win_optimized/readme.md
index 703a37be0..703a37be0 100644
--- a/keyboards/clueboard/keymaps/win_optimized/readme.md
+++ b/keyboards/clueboard_66/keymaps/win_optimized/readme.md
diff --git a/keyboards/clueboard/keymaps/xyverz/rules.mk b/keyboards/clueboard_66/keymaps/xyverz/Makefile
index 950dadf84..950dadf84 100644
--- a/keyboards/clueboard/keymaps/xyverz/rules.mk
+++ b/keyboards/clueboard_66/keymaps/xyverz/Makefile
diff --git a/keyboards/clueboard/keymaps/xyverz/keymap.c b/keyboards/clueboard_66/keymaps/xyverz/keymap.c
index 540cd7983..b725b11dd 100644
--- a/keyboards/clueboard/keymaps/xyverz/keymap.c
+++ b/keyboards/clueboard_66/keymaps/xyverz/keymap.c
@@ -1,7 +1,7 @@
// Xyverz' keymap.
// It's based on the default keymap, but Dvorak!
-#include "clueboard.h"
+#include "clueboard_66.h"
// Used for SHIFT_ESC
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
diff --git a/keyboards/clueboard_66/keymaps/xyverz/rules.mk b/keyboards/clueboard_66/keymaps/xyverz/rules.mk
new file mode 100644
index 000000000..950dadf84
--- /dev/null
+++ b/keyboards/clueboard_66/keymaps/xyverz/rules.mk
@@ -0,0 +1,49 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+# change to "no" to disable the options, or define them in the makefile.mk in
+# the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard_66/readme.md
index 13859bc24..13859bc24 100644
--- a/keyboards/clueboard/readme.md
+++ b/keyboards/clueboard_66/readme.md
diff --git a/keyboards/clueboard_66/rev1/Makefile b/keyboards/clueboard_66/rev1/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/clueboard_66/rev1/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard_66/rev1/config.h
index f40876ffb..f40876ffb 100644
--- a/keyboards/clueboard/rev1/config.h
+++ b/keyboards/clueboard_66/rev1/config.h
diff --git a/keyboards/clueboard/rev1/rev1.c b/keyboards/clueboard_66/rev1/rev1.c
index 90fc6956c..90fc6956c 100644
--- a/keyboards/clueboard/rev1/rev1.c
+++ b/keyboards/clueboard_66/rev1/rev1.c
diff --git a/keyboards/clueboard/rev1/rev1.h b/keyboards/clueboard_66/rev1/rev1.h
index abdfd079b..cc94085f9 100644
--- a/keyboards/clueboard/rev1/rev1.h
+++ b/keyboards/clueboard_66/rev1/rev1.h
@@ -1,7 +1,7 @@
#ifndef REV1_H
#define REV1_H
-#include "../clueboard.h"
+#include "../clueboard_66.h"
/* Clueboard matrix layout
* ,-----------------------------------------------------------. ,---.
diff --git a/keyboards/clueboard/rev1/rules.mk b/keyboards/clueboard_66/rev1/rules.mk
index f84561674..f84561674 100644
--- a/keyboards/clueboard/rev1/rules.mk
+++ b/keyboards/clueboard_66/rev1/rules.mk
diff --git a/keyboards/clueboard_66/rev2/Makefile b/keyboards/clueboard_66/rev2/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/clueboard_66/rev2/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard_66/rev2/config.h
index bc34fc07b..bc34fc07b 100644
--- a/keyboards/clueboard/rev2/config.h
+++ b/keyboards/clueboard_66/rev2/config.h
diff --git a/keyboards/clueboard/rev2/rev2.c b/keyboards/clueboard_66/rev2/rev2.c
index 1a35b87b8..1a35b87b8 100644
--- a/keyboards/clueboard/rev2/rev2.c
+++ b/keyboards/clueboard_66/rev2/rev2.c
diff --git a/keyboards/clueboard/rev2/rev2.h b/keyboards/clueboard_66/rev2/rev2.h
index 2e9cb9dc2..75015ec02 100644
--- a/keyboards/clueboard/rev2/rev2.h
+++ b/keyboards/clueboard_66/rev2/rev2.h
@@ -1,7 +1,7 @@
#ifndef REV2_H
#define REV2_H
-#include "../clueboard.h"
+#include "../clueboard_66.h"
/* Clueboard matrix layout
* ,-----------------------------------------------------------. ,---.
diff --git a/keyboards/clueboard/rev2/rules.mk b/keyboards/clueboard_66/rev2/rules.mk
index 54a2685bf..54a2685bf 100644
--- a/keyboards/clueboard/rev2/rules.mk
+++ b/keyboards/clueboard_66/rev2/rules.mk
diff --git a/keyboards/clueboard/rev3/config.h b/keyboards/clueboard_66/rev3/config.h
index cd12db22e..cd12db22e 100644
--- a/keyboards/clueboard/rev3/config.h
+++ b/keyboards/clueboard_66/rev3/config.h
diff --git a/keyboards/clueboard/rev3/rev3.c b/keyboards/clueboard_66/rev3/rev3.c
index 8f703d2c9..8f703d2c9 100644
--- a/keyboards/clueboard/rev3/rev3.c
+++ b/keyboards/clueboard_66/rev3/rev3.c
diff --git a/keyboards/clueboard/rev3/rev3.h b/keyboards/clueboard_66/rev3/rev3.h
index eade14c3b..fd6f98344 100644
--- a/keyboards/clueboard/rev3/rev3.h
+++ b/keyboards/clueboard_66/rev3/rev3.h
@@ -1,7 +1,7 @@
#ifndef REV3_H
#define REV3_H
-#include "../clueboard.h"
+#include "../clueboard_66.h"
/* Clueboard matrix layout
* ,-----------------------------------------------------------. ,---.
diff --git a/keyboards/clueboard/rev3/rules.mk b/keyboards/clueboard_66/rev3/rules.mk
index 54a2685bf..54a2685bf 100644
--- a/keyboards/clueboard/rev3/rules.mk
+++ b/keyboards/clueboard_66/rev3/rules.mk
diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard_66/rules.mk
index afbb531a2..afbb531a2 100644
--- a/keyboards/clueboard/rules.mk
+++ b/keyboards/clueboard_66/rules.mk
diff --git a/keyboards/clueboard/subproject.mk b/keyboards/clueboard_66/subproject.mk
index 7c9b39598..7c9b39598 100644
--- a/keyboards/clueboard/subproject.mk
+++ b/keyboards/clueboard_66/subproject.mk
diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h
index 704b17a78..d2f018ce6 100644
--- a/keyboards/gh60/gh60.h
+++ b/keyboards/gh60/gh60.h
@@ -57,6 +57,22 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \
}
+/* ISO variant. Remove useless ANSI keys */
+#define KEYMAP_ISO( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K45, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \
+ { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \
+}
+
+
/* HHKB Variant */
#define KEYMAP_HHKB( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
@@ -72,8 +88,8 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \
}
-#define LAYOUT_60_ansi KEYMAP_ANSI
-#define LAYOUT_60_iso KEYMAP
-#define LAYOUT_60_ansi_split_bs_rshift KEYMAP_HHKB
+#define LAYOUT_60_ansi KEYMAP_ANSI
+#define LAYOUT_60_iso KEYMAP_ISO
+#define LAYOUT_60_ansi_split_bs_rshift KEYMAP_HHKB
-#endif \ No newline at end of file
+#endif
diff --git a/keyboards/satan/satan.h b/keyboards/satan/satan.h
index 5128fd073..8a8874ced 100644
--- a/keyboards/satan/satan.h
+++ b/keyboards/satan/satan.h
@@ -62,6 +62,22 @@
{k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
}
+/* Satan GH60 ISO layout
+ */
+#define KEYMAP_ISO( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
+ k40, k41, k42, k45, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, XXX}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+ {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d} \
+}
/* Satan HHKB matrix layout
* ,------------------------------------------------------------.
@@ -126,7 +142,7 @@ void matrix_init_user(void);
void matrix_scan_user(void);
#define LAYOUT_60_ansi KEYMAP_ANSI
-#define LAYOUT_60_iso KEYMAP
+#define LAYOUT_60_iso KEYMAP_ISO
#define LAYOUT_60_ansi_split_bs_rshift KEYMAP_HHKB
#endif
diff --git a/layouts/community/60_iso/unxmaal/keymap.c b/layouts/community/60_iso/unxmaal/keymap.c
index e9b38788e..8f2d55d9b 100644
--- a/layouts/community/60_iso/unxmaal/keymap.c
+++ b/layouts/community/60_iso/unxmaal/keymap.c
@@ -8,25 +8,25 @@
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
- * ANSI Base, Mac style
+ * ISO Base, Mac style
* ,-----------------------------------------------------------------------------.
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
* |-----------------------------------------------------------------------------|
- * |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
+ * |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| |
+ * |----------------------------------------------------------------------- |
+ * |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| #|Enter|
* |-----------------------------------------------------------------------------|
- * |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
- * |-----------------------------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
+ * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| Shift |
* |-----------------------------------------------------------------------------|
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
* `-----------------------------------------------------------------------------'
*/
[_BL] = LAYOUT_60_iso(
KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
- KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
- KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \
- KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
- MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
+ KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC, \
+ KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, \
+ MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
/*
* Pok3r style arrow cluster
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
* |-----------------------------------------------------------|
* | | | | | | | | |Up| | | | | |
- * |-----------------------------------------------------------|
+ * |------------------------------------------------------- |
* | | | | | | | |Left|Down|Right| | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | |
@@ -44,10 +44,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_AL] = LAYOUT_60_iso(
KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
@@ -56,8 +56,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset |
* |-------------------------------------------------------------|
* | | | | | | | | | |PgUp| | | | |
- * |-------------------------------------------------------------|
- * | | | | | | | |Home|PgDown|End| | | |
+ * |-------------------------------------------------------- |
+ * | | | | | | | |Home|PgDown|End| | | | |
* |-------------------------------------------------------------|
* | | | | | | | | | | | | |
* |-------------------------------------------------------------|
@@ -66,10 +66,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_FL] = LAYOUT_60_iso(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
/*
* Locking layer for controlling the underglow.
@@ -79,8 +79,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | |On|Mode| | | | | | | | | | |
+ * |------------------------------------------------------- |
+ * | |On|Mode| | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | |
* |-----------------------------------------------------------|
@@ -89,10 +89,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_UL] = LAYOUT_60_iso(
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+ KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
};
enum function_id {
@@ -163,6 +163,7 @@ void matrix_scan_user(void) {
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
+#ifdef RGBLIGHT_ENABLE
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
@@ -204,6 +205,7 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
rgblight_step();
}
break;
+#endif
static uint8_t shift_esc_shift_mask;
// Shift + ESC = ~
case SHIFT_ESC:
diff --git a/layouts/community/60_iso/unxmaal/rules.mk b/layouts/community/60_iso/unxmaal/rules.mk
index 26fc6dc66..2ce7257d2 100644
--- a/layouts/community/60_iso/unxmaal/rules.mk
+++ b/layouts/community/60_iso/unxmaal/rules.mk
@@ -1 +1,4 @@
-RGBLIGHT_ENABLE = yes # Enable RGB Underglow
+# Only enable RGB on avr boards
+ifndef MCU_FAMILY
+ RGBLIGHT_ENABLE = yes # Enable RGB Underglow
+endif
diff --git a/layouts/default/60_ansi/default_60_ansi/keymap.c b/layouts/default/60_ansi/default_60_ansi/keymap.c
index 130dc19c4..6da2d25e7 100644
--- a/layouts/default/60_ansi/default_60_ansi/keymap.c
+++ b/layouts/default/60_ansi/default_60_ansi/keymap.c
@@ -8,4 +8,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
)
-}; \ No newline at end of file
+};
diff --git a/layouts/default/60_iso/default_60_iso/keymap.c b/layouts/default/60_iso/default_60_iso/keymap.c
index b9d932e77..85e0d3e3d 100644
--- a/layouts/default/60_iso/default_60_iso/keymap.c
+++ b/layouts/default/60_iso/default_60_iso/keymap.c
@@ -3,9 +3,9 @@
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_60_iso(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT,
- KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT,
- KC_LCTRL, KC_LALT, KC_LGUI, KC_SPACE, KC_NO, KC_RGUI, KC_RALT, KC_MENU, KC_RCTL
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTRL, KC_LALT, KC_LGUI, KC_SPACE, KC_RGUI, KC_RALT, KC_MENU, KC_RCTL
)
-}; \ No newline at end of file
+};
diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c
index e85326ff4..e08233486 100644
--- a/quantum/audio/audio.c
+++ b/quantum/audio/audio.c
@@ -17,9 +17,11 @@
#include <stdio.h>
#include <string.h>
//#include <math.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-#include <avr/io.h>
+#if defined(__AVR__)
+ #include <avr/pgmspace.h>
+ #include <avr/interrupt.h>
+ #include <avr/io.h>
+#endif
#include "print.h"
#include "audio.h"
#include "keymap.h"
diff --git a/quantum/audio/audio.h b/quantum/audio/audio.h
index 79e0da229..da09b2bcd 100644
--- a/quantum/audio/audio.h
+++ b/quantum/audio/audio.h
@@ -18,12 +18,15 @@
#include <stdint.h>
#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#if defined(__AVR__)
+ #include <avr/io.h>
+#endif
+#include "wait.h"
#include "musical_notes.h"
#include "song_list.h"
#include "voices.h"
#include "quantum.h"
+#include <math.h>
// Largely untested PWM audio mode (doesn't sound as good)
// #define PWM_AUDIO
diff --git a/quantum/audio/audio_arm.c b/quantum/audio/audio_arm.c
new file mode 100644
index 000000000..5ad0c86ec
--- /dev/null
+++ b/quantum/audio/audio_arm.c
@@ -0,0 +1,606 @@
+/* Copyright 2016 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "audio.h"
+#include "ch.h"
+#include "hal.h"
+
+#include <stdio.h>
+#include <string.h>
+#include "print.h"
+#include "keymap.h"
+
+#include "eeconfig.h"
+
+// -----------------------------------------------------------------------------
+
+int voices = 0;
+int voice_place = 0;
+float frequency = 0;
+float frequency_alt = 0;
+int volume = 0;
+long position = 0;
+
+float frequencies[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+int volumes[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+bool sliding = false;
+
+float place = 0;
+
+uint8_t * sample;
+uint16_t sample_length = 0;
+
+bool playing_notes = false;
+bool playing_note = false;
+float note_frequency = 0;
+float note_length = 0;
+uint8_t note_tempo = TEMPO_DEFAULT;
+float note_timbre = TIMBRE_DEFAULT;
+uint16_t note_position = 0;
+float (* notes_pointer)[][2];
+uint16_t notes_count;
+bool notes_repeat;
+bool note_resting = false;
+
+uint8_t current_note = 0;
+uint8_t rest_counter = 0;
+
+#ifdef VIBRATO_ENABLE
+float vibrato_counter = 0;
+float vibrato_strength = .5;
+float vibrato_rate = 0.125;
+#endif
+
+float polyphony_rate = 0;
+
+static bool audio_initialized = false;
+
+audio_config_t audio_config;
+
+uint16_t envelope_index = 0;
+bool glissando = true;
+
+#ifndef STARTUP_SONG
+ #define STARTUP_SONG SONG(STARTUP_SOUND)
+#endif
+float startup_song[][2] = STARTUP_SONG;
+
+static void gpt_cb6(GPTDriver *gptp);
+static void gpt_cb7(GPTDriver *gptp);
+static void gpt_cb8(GPTDriver *gptp);
+
+/*
+ * GPT6 configuration.
+ */
+GPTConfig gpt6cfg1 = {
+ .frequency = 440,
+ .callback = gpt_cb6,
+ .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
+ .dier = 0U
+};
+
+GPTConfig gpt7cfg1 = {
+ .frequency = 440,
+ .callback = gpt_cb7,
+ .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
+ .dier = 0U
+};
+
+GPTConfig gpt8cfg1 = {
+ .frequency = 10,
+ .callback = gpt_cb8,
+ .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
+ .dier = 0U
+};
+
+static void gpt_cb6(GPTDriver *gptp) {
+ palTogglePad(GPIOA, 4);
+}
+
+
+static void gpt_cb7(GPTDriver *gptp) {
+ palTogglePad(GPIOA, 5);
+}
+
+void audio_init()
+{
+
+ if (audio_initialized)
+ return;
+
+ // Check EEPROM
+ // if (!eeconfig_is_enabled())
+ // {
+ // eeconfig_init();
+ // }
+ // audio_config.raw = eeconfig_read_audio();
+ audio_config.enable = true;
+
+ palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL);
+
+ audio_initialized = true;
+
+ if (audio_config.enable) {
+ PLAY_SONG(startup_song);
+ }
+
+}
+
+void stop_all_notes()
+{
+ dprintf("audio stop all notes");
+
+ if (!audio_initialized) {
+ audio_init();
+ }
+ voices = 0;
+
+ gptStopTimer(&GPTD6);
+ gptStopTimer(&GPTD7);
+ gptStopTimer(&GPTD8);
+
+ playing_notes = false;
+ playing_note = false;
+ frequency = 0;
+ frequency_alt = 0;
+ volume = 0;
+
+ for (uint8_t i = 0; i < 8; i++)
+ {
+ frequencies[i] = 0;
+ volumes[i] = 0;
+ }
+}
+
+void stop_note(float freq)
+{
+ dprintf("audio stop note freq=%d", (int)freq);
+
+ if (playing_note) {
+ if (!audio_initialized) {
+ audio_init();
+ }
+ for (int i = 7; i >= 0; i--) {
+ if (frequencies[i] == freq) {
+ frequencies[i] = 0;
+ volumes[i] = 0;
+ for (int j = i; (j < 7); j++) {
+ frequencies[j] = frequencies[j+1];
+ frequencies[j+1] = 0;
+ volumes[j] = volumes[j+1];
+ volumes[j+1] = 0;
+ }
+ break;
+ }
+ }
+ voices--;
+ if (voices < 0)
+ voices = 0;
+ if (voice_place >= voices) {
+ voice_place = 0;
+ }
+ if (voices == 0) {
+ gptStopTimer(&GPTD6);
+ gptStopTimer(&GPTD7);
+ gptStopTimer(&GPTD8);
+ frequency = 0;
+ frequency_alt = 0;
+ volume = 0;
+ playing_note = false;
+ }
+ }
+}
+
+#ifdef VIBRATO_ENABLE
+
+float mod(float a, int b)
+{
+ float r = fmod(a, b);
+ return r < 0 ? r + b : r;
+}
+
+float vibrato(float average_freq) {
+ #ifdef VIBRATO_STRENGTH_ENABLE
+ float vibrated_freq = average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength);
+ #else
+ float vibrated_freq = average_freq * vibrato_lut[(int)vibrato_counter];
+ #endif
+ vibrato_counter = mod((vibrato_counter + vibrato_rate * (1.0 + 440.0/average_freq)), VIBRATO_LUT_LENGTH);
+ return vibrated_freq;
+}
+
+#endif
+
+static void restart_gpt6(void) {
+ // gptStopTimer(&GPTD6);
+
+ gptStart(&GPTD6, &gpt6cfg1);
+ gptStartContinuous(&GPTD6, 2U);
+}
+
+static void restart_gpt7(void) {
+ // gptStopTimer(&GPTD7);
+
+ gptStart(&GPTD7, &gpt7cfg1);
+ gptStartContinuous(&GPTD7, 2U);
+}
+
+static void gpt_cb8(GPTDriver *gptp) {
+ float freq;
+
+ if (playing_note) {
+ if (voices > 0) {
+
+ float freq_alt = 0;
+ if (voices > 1) {
+ if (polyphony_rate == 0) {
+ if (glissando) {
+ if (frequency_alt != 0 && frequency_alt < frequencies[voices - 2] && frequency_alt < frequencies[voices - 2] * pow(2, -440/frequencies[voices - 2]/12/2)) {
+ frequency_alt = frequency_alt * pow(2, 440/frequency_alt/12/2);
+ } else if (frequency_alt != 0 && frequency_alt > frequencies[voices - 2] && frequency_alt > frequencies[voices - 2] * pow(2, 440/frequencies[voices - 2]/12/2)) {
+ frequency_alt = frequency_alt * pow(2, -440/frequency_alt/12/2);
+ } else {
+ frequency_alt = frequencies[voices - 2];
+ }
+ } else {
+ frequency_alt = frequencies[voices - 2];
+ }
+
+ #ifdef VIBRATO_ENABLE
+ if (vibrato_strength > 0) {
+ freq_alt = vibrato(frequency_alt);
+ } else {
+ freq_alt = frequency_alt;
+ }
+ #else
+ freq_alt = frequency_alt;
+ #endif
+ }
+
+ if (envelope_index < 65535) {
+ envelope_index++;
+ }
+
+ freq_alt = voice_envelope(freq_alt);
+
+ if (freq_alt < 30.517578125) {
+ freq_alt = 30.52;
+ }
+
+ if (gpt6cfg1.frequency != (uint16_t)freq_alt) {
+ gpt6cfg1.frequency = freq_alt;
+ restart_gpt6();
+ }
+ //note_timbre;
+ } else {
+ // gptStopTimer(&GPTD6);
+ }
+
+ if (polyphony_rate > 0) {
+ if (voices > 1) {
+ voice_place %= voices;
+ if (place++ > (frequencies[voice_place] / polyphony_rate)) {
+ voice_place = (voice_place + 1) % voices;
+ place = 0.0;
+ }
+ }
+
+ #ifdef VIBRATO_ENABLE
+ if (vibrato_strength > 0) {
+ freq = vibrato(frequencies[voice_place]);
+ } else {
+ freq = frequencies[voice_place];
+ }
+ #else
+ freq = frequencies[voice_place];
+ #endif
+ } else {
+ if (glissando) {
+ if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) {
+ frequency = frequency * pow(2, 440/frequency/12/2);
+ } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) {
+ frequency = frequency * pow(2, -440/frequency/12/2);
+ } else {
+ frequency = frequencies[voices - 1];
+ }
+ } else {
+ frequency = frequencies[voices - 1];
+ }
+
+ #ifdef VIBRATO_ENABLE
+ if (vibrato_strength > 0) {
+ freq = vibrato(frequency);
+ } else {
+ freq = frequency;
+ }
+ #else
+ freq = frequency;
+ #endif
+ }
+
+ if (envelope_index < 65535) {
+ envelope_index++;
+ }
+
+ freq = voice_envelope(freq);
+
+ if (freq < 30.517578125) {
+ freq = 30.52;
+ }
+
+
+ if (gpt7cfg1.frequency != (uint16_t)freq) {
+ gpt7cfg1.frequency = freq;
+ restart_gpt7();
+ }
+ //note_timbre;
+ } else {
+ // gptStopTimer(&GPTD7);
+ }
+ }
+
+ if (playing_notes) {
+ if (note_frequency > 0) {
+ #ifdef VIBRATO_ENABLE
+ if (vibrato_strength > 0) {
+ freq = vibrato(note_frequency);
+ } else {
+ freq = note_frequency;
+ }
+ #else
+ freq = note_frequency;
+ #endif
+
+ if (envelope_index < 65535) {
+ envelope_index++;
+ }
+ freq = voice_envelope(freq);
+
+
+ if (gpt6cfg1.frequency != (uint16_t)freq) {
+ gpt6cfg1.frequency = freq;
+ restart_gpt6();
+ gpt7cfg1.frequency = freq;
+ restart_gpt7();
+ }
+ //note_timbre;
+ } else {
+ // gptStopTimer(&GPTD6);
+ // gptStopTimer(&GPTD7);
+ }
+
+ note_position++;
+ bool end_of_note = false;
+ if (gpt6cfg1.frequency > 0) {
+ if (!note_resting)
+ end_of_note = (note_position >= (note_length*16 - 1));
+ else
+ end_of_note = (note_position >= (note_length*16));
+ } else {
+ end_of_note = (note_position >= (note_length*16));
+ }
+
+ if (end_of_note) {
+ current_note++;
+ if (current_note >= notes_count) {
+ if (notes_repeat) {
+ current_note = 0;
+ } else {
+ gptStopTimer(&GPTD6);
+ gptStopTimer(&GPTD7);
+ // gptStopTimer(&GPTD8);
+ playing_notes = false;
+ return;
+ }
+ }
+ if (!note_resting) {
+ note_resting = true;
+ current_note--;
+ if ((*notes_pointer)[current_note][0] == (*notes_pointer)[current_note + 1][0]) {
+ note_frequency = 0;
+ note_length = 1;
+ } else {
+ note_frequency = (*notes_pointer)[current_note][0];
+ note_length = 1;
+ }
+ } else {
+ note_resting = false;
+ envelope_index = 0;
+ note_frequency = (*notes_pointer)[current_note][0];
+ note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
+ }
+
+ note_position = 0;
+ }
+ }
+
+ if (!audio_config.enable) {
+ playing_notes = false;
+ playing_note = false;
+ }
+}
+
+void play_note(float freq, int vol) {
+
+ dprintf("audio play note freq=%d vol=%d", (int)freq, vol);
+
+ if (!audio_initialized) {
+ audio_init();
+ }
+
+ if (audio_config.enable && voices < 8) {
+
+ // Cancel notes if notes are playing
+ if (playing_notes)
+ stop_all_notes();
+
+ playing_note = true;
+
+ envelope_index = 0;
+
+ if (freq > 0) {
+ frequencies[voices] = freq;
+ volumes[voices] = vol;
+ voices++;
+ }
+
+ gptStart(&GPTD8, &gpt8cfg1);
+ gptStartContinuous(&GPTD8, 2U);
+
+ }
+
+}
+
+void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat)
+{
+
+ if (!audio_initialized) {
+ audio_init();
+ }
+
+ if (audio_config.enable) {
+
+ // Cancel note if a note is playing
+ if (playing_note)
+ stop_all_notes();
+
+ playing_notes = true;
+
+ notes_pointer = np;
+ notes_count = n_count;
+ notes_repeat = n_repeat;
+
+ place = 0;
+ current_note = 0;
+
+ note_frequency = (*notes_pointer)[current_note][0];
+ note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
+ note_position = 0;
+
+ gptStart(&GPTD8, &gpt8cfg1);
+ gptStartContinuous(&GPTD8, 2U);
+ restart_gpt6();
+ restart_gpt7();
+ }
+
+}
+
+bool is_playing_notes(void) {
+ return playing_notes;
+}
+
+bool is_audio_on(void) {
+ return (audio_config.enable != 0);
+}
+
+void audio_toggle(void) {
+ audio_config.enable ^= 1;
+ eeconfig_update_audio(audio_config.raw);
+ if (audio_config.enable)
+ audio_on_user();
+}
+
+void audio_on(void) {
+ audio_config.enable = 1;
+ eeconfig_update_audio(audio_config.raw);
+ audio_on_user();
+}
+
+void audio_off(void) {
+ audio_config.enable = 0;
+ eeconfig_update_audio(audio_config.raw);
+}
+
+#ifdef VIBRATO_ENABLE
+
+// Vibrato rate functions
+
+void set_vibrato_rate(float rate) {
+ vibrato_rate = rate;
+}
+
+void increase_vibrato_rate(float change) {
+ vibrato_rate *= change;
+}
+
+void decrease_vibrato_rate(float change) {
+ vibrato_rate /= change;
+}
+
+#ifdef VIBRATO_STRENGTH_ENABLE
+
+void set_vibrato_strength(float strength) {
+ vibrato_strength = strength;
+}
+
+void increase_vibrato_strength(float change) {
+ vibrato_strength *= change;
+}
+
+void decrease_vibrato_strength(float change) {
+ vibrato_strength /= change;
+}
+
+#endif /* VIBRATO_STRENGTH_ENABLE */
+
+#endif /* VIBRATO_ENABLE */
+
+// Polyphony functions
+
+void set_polyphony_rate(float rate) {
+ polyphony_rate = rate;
+}
+
+void enable_polyphony() {
+ polyphony_rate = 5;
+}
+
+void disable_polyphony() {
+ polyphony_rate = 0;
+}
+
+void increase_polyphony_rate(float change) {
+ polyphony_rate *= change;
+}
+
+void decrease_polyphony_rate(float change) {
+ polyphony_rate /= change;
+}
+
+// Timbre function
+
+void set_timbre(float timbre) {
+ note_timbre = timbre;
+}
+
+// Tempo functions
+
+void set_tempo(uint8_t tempo) {
+ note_tempo = tempo;
+}
+
+void decrease_tempo(uint8_t tempo_change) {
+ note_tempo += tempo_change;
+}
+
+void increase_tempo(uint8_t tempo_change) {
+ if (note_tempo - tempo_change < 10) {
+ note_tempo = 10;
+ } else {
+ note_tempo -= tempo_change;
+ }
+}
diff --git a/quantum/audio/luts.c b/quantum/audio/luts.c
index 57f2d5924..4404aff43 100644
--- a/quantum/audio/luts.c
+++ b/quantum/audio/luts.c
@@ -14,9 +14,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/pgmspace.h>
#include "luts.h"
const float vibrato_lut[VIBRATO_LUT_LENGTH] =
diff --git a/quantum/audio/luts.h b/quantum/audio/luts.h
index 155e34e88..a377a6c87 100644
--- a/quantum/audio/luts.h
+++ b/quantum/audio/luts.h
@@ -14,9 +14,14 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/pgmspace.h>
+#if defined(__AVR__)
+ #include <avr/io.h>
+ #include <avr/interrupt.h>
+ #include <avr/pgmspace.h>
+#else
+ #include "ch.h"
+ #include "hal.h"
+#endif
#ifndef LUTS_H
#define LUTS_H
diff --git a/quantum/audio/voices.h b/quantum/audio/voices.h
index 9403a6b5e..1cf33095a 100644
--- a/quantum/audio/voices.h
+++ b/quantum/audio/voices.h
@@ -15,8 +15,10 @@
*/
#include <stdint.h>
#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#if defined(__AVR__)
+ #include <avr/io.h>
+#endif
+#include "wait.h"
#include "luts.h"
#ifndef VOICES_H
diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk
index 61e0a847d..c938eaeb9 100644
--- a/tmk_core/chibios.mk
+++ b/tmk_core/chibios.mk
@@ -143,7 +143,7 @@ MCUFLAGS = -mcpu=$(MCU)
DEBUG = gdb
-DFU_ARGS =
+DFU_ARGS ?=
ifneq ("$(SERIAL)","")
DFU_ARGS += -S $(SERIAL)
endif
@@ -157,4 +157,4 @@ dfu-util: $(BUILD_DIR)/$(TARGET).bin sizeafter
$(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin
bin: $(BUILD_DIR)/$(TARGET).bin sizeafter
- $(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin; \ No newline at end of file
+ $(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
diff --git a/tmk_core/common/chibios/bootloader.c b/tmk_core/common/chibios/bootloader.c
index 8a533ab6f..fc17fca1b 100644
--- a/tmk_core/common/chibios/bootloader.c
+++ b/tmk_core/common/chibios/bootloader.c
@@ -16,6 +16,19 @@ void bootloader_jump(void) {
NVIC_SystemReset();
}
+#elif defined(STM32F3XX)
+/* This code should be checked whether it runs correctly on platforms.
+ * It was added for clueboard60 BUT HAS NOT BEEN TESTED.
+ * FIXME - Test this
+ */
+#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+extern uint32_t __ram0_end__;
+
+void bootloader_jump(void) {
+ *((unsigned long *)(SYMVAL(__ram0_end__) - 4)) = 0xDEADBEEF; // set magic flag => reset handler will jump into boot loader
+ NVIC_SystemReset();
+}
+
#else /* defined(STM32F0XX) */
#error Check that the bootloader code works on your platform and add it to bootloader.c!
#endif /* defined(STM32F0XX) */
@@ -35,8 +48,9 @@ void bootloader_jump(void) {
#else /* defined(KIIBOHD_BOOTLOADER) */
/* Default for Kinetis - expecting an ARM Teensy */
+#include "wait.h"
void bootloader_jump(void) {
- chThdSleepMilliseconds(100);
+ wait_ms(100);
__BKPT(0);
}
#endif /* defined(KIIBOHD_BOOTLOADER) */
@@ -44,4 +58,4 @@ void bootloader_jump(void) {
#else /* neither STM32 nor KINETIS */
__attribute__((weak))
void bootloader_jump(void) {}
-#endif \ No newline at end of file
+#endif
diff --git a/tmk_core/common/chibios/suspend.c b/tmk_core/common/chibios/suspend.c
index 6ca16034f..7c3c75387 100644
--- a/tmk_core/common/chibios/suspend.c
+++ b/tmk_core/common/chibios/suspend.c
@@ -10,10 +10,11 @@
#include "host.h"
#include "backlight.h"
#include "suspend.h"
+#include "wait.h"
void suspend_idle(uint8_t time) {
// TODO: this is not used anywhere - what units is 'time' in?
- chThdSleepMilliseconds(time);
+ wait_ms(time);
}
void suspend_power_down(void) {
@@ -24,7 +25,7 @@ void suspend_power_down(void) {
// on AVR, this enables the watchdog for 15ms (max), and goes to
// SLEEP_MODE_PWR_DOWN
- chThdSleepMilliseconds(17);
+ wait_ms(17);
}
__attribute__ ((weak)) void matrix_power_up(void) {}
diff --git a/tmk_core/common/wait.h b/tmk_core/common/wait.h
index bdcb3f2a4..553f5243f 100644
--- a/tmk_core/common/wait.h
+++ b/tmk_core/common/wait.h
@@ -11,10 +11,15 @@ extern "C" {
# include <util/delay.h>
# define wait_ms(ms) _delay_ms(ms)
# define wait_us(us) _delay_us(us)
-#elif defined(PROTOCOL_CHIBIOS)
+#elif defined PROTOCOL_CHIBIOS
# include "ch.h"
-# define wait_ms(ms) chThdSleepMilliseconds(ms)
-# define wait_us(us) chThdSleepMicroseconds(us)
+# if defined(STM32F3xx_MCUCONF)
+# define wait_ms(ms) chSysPolledDelayX(MS2RTC(STM32_HCLK, (ms)))
+# define wait_us(us) chSysPolledDelayX(US2RTC(STM32_HCLK, (us)))
+# else
+# define wait_ms(ms) chThdSleepMilliseconds(ms)
+# define wait_us(us) chThdSleepMicroseconds(us)
+# endif
#elif defined(__arm__)
# include "wait_api.h"
#else // Unit tests
diff --git a/tmk_core/protocol/chibios/main.c b/tmk_core/protocol/chibios/main.c
index b0eb9aef8..7138b5535 100644
--- a/tmk_core/protocol/chibios/main.c
+++ b/tmk_core/protocol/chibios/main.c
@@ -42,7 +42,7 @@
#include "visualizer/visualizer.h"
#endif
#include "suspend.h"
-
+#include "wait.h"
/* -------------------------
* TMK host driver defs
@@ -70,19 +70,19 @@ host_driver_t chibios_driver = {
* Amber LED blinker thread, times are in milliseconds.
*/
/* set this variable to non-zero anywhere to blink once */
-// uint8_t blinkLed = 0;
-// static THD_WORKING_AREA(waBlinkerThread, 128);
-// static THD_FUNCTION(blinkerThread, arg) {
+// static THD_WORKING_AREA(waThread1, 128);
+// static THD_FUNCTION(Thread1, arg) {
+
// (void)arg;
-// chRegSetThreadName("blinkOrange");
-// while(true) {
-// if(blinkLed) {
-// blinkLed = 0;
-// palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
-// chThdSleepMilliseconds(100);
-// palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
-// }
-// chThdSleepMilliseconds(100);
+// chRegSetThreadName("blinker");
+// while (true) {
+// systime_t time;
+
+// time = USB_DRIVER.state == USB_ACTIVE ? 250 : 500;
+// palClearLine(LINE_CAPS_LOCK);
+// chSysPolledDelayX(MS2RTC(STM32_HCLK, time));
+// palSetLine(LINE_CAPS_LOCK);
+// chSysPolledDelayX(MS2RTC(STM32_HCLK, time));
// }
// }
@@ -96,7 +96,7 @@ int main(void) {
chSysInit();
// TESTING
- // chThdCreateStatic(waBlinkerThread, sizeof(waBlinkerThread), NORMALPRIO, blinkerThread, NULL);
+ // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/* Init USB */
init_usb_driver(&USB_DRIVER);
@@ -128,7 +128,7 @@ int main(void) {
}
serial_link_update();
#endif
- chThdSleepMilliseconds(50);
+ wait_ms(50);
}
/* Do need to wait here!
@@ -136,7 +136,7 @@ int main(void) {
* before the USB is completely ready, which sometimes causes
* HardFaults.
*/
- chThdSleepMilliseconds(50);
+ wait_ms(50);
print("USB configured.\n");
diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c
index d0c72c46c..59edab9bd 100644
--- a/tmk_core/protocol/chibios/usb_main.c
+++ b/tmk_core/protocol/chibios/usb_main.c
@@ -27,6 +27,7 @@
#include "sleep_led.h"
#include "led.h"
#endif
+#include "wait.h"
#ifdef NKRO_ENABLE
#include "keycode_config.h"
@@ -39,6 +40,14 @@
* ---------------------------------------------------------
*/
+#ifndef usb_lld_connect_bus
+ #define usb_lld_connect_bus(usbp)
+#endif
+
+#ifndef usb_lld_disconnect_bus
+ #define usb_lld_disconnect_bus(usbp)
+#endif
+
uint8_t keyboard_idle __attribute__((aligned(2))) = 0;
uint8_t keyboard_protocol __attribute__((aligned(2))) = 1;
uint16_t keyboard_led_stats __attribute__((aligned(2))) = 0;
@@ -1017,7 +1026,7 @@ void init_usb_driver(USBDriver *usbp) {
* after a reset.
*/
usbDisconnectBus(usbp);
- chThdSleepMilliseconds(1500);
+ wait_ms(1500);
usbStart(usbp, &usbcfg);
usbConnectBus(usbp);
@@ -1037,16 +1046,16 @@ void send_remote_wakeup(USBDriver *usbp) {
#if defined(K20x) || defined(KL2x)
#if KINETIS_USB_USE_USB0
USB0->CTL |= USBx_CTL_RESUME;
- chThdSleepMilliseconds(15);
+ wait_ms(15);
USB0->CTL &= ~USBx_CTL_RESUME;
#endif /* KINETIS_USB_USE_USB0 */
-#elif defined(STM32F0XX) || defined(STM32F1XX) /* K20x || KL2x */
+#elif defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) /* End K20x || KL2x */
STM32_USB->CNTR |= CNTR_RESUME;
- chThdSleepMilliseconds(15);
+ wait_ms(15);
STM32_USB->CNTR &= ~CNTR_RESUME;
-#else /* STM32F0XX || STM32F1XX */
+#else /* End STM32F0XX || STM32F1XX || STM32F3XX */
#warning Sending remote wakeup packet not implemented for your platform.
-#endif /* K20x || KL2x */
+#endif
}
/* ---------------------------------------------------------
diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index aef4d5e55..73ffeaac1 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -385,4 +385,4 @@ $(eval $(foreach OUTPUT,$(OUTPUTS),$(shell mkdir -p $(OUTPUT) 2>/dev/null)))
.PHONY : all finish sizebefore sizeafter qmkversion \
gccversion build elf hex eep lss sym coff extcoff \
clean clean_list debug gdb-config show_path \
-program teensy dfu flip dfu-ee flip-ee dfu-start \ No newline at end of file
+program teensy dfu flip dfu-ee flip-ee dfu-start