aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/cannonkeys
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/cannonkeys')
-rw-r--r--keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c109
-rw-r--r--keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h922
-rw-r--r--keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk5
-rw-r--r--keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg703
-rw-r--r--keyboards/cannonkeys/instant60/bootloader_defs.h7
-rw-r--r--keyboards/cannonkeys/instant60/chconf.h524
-rw-r--r--keyboards/cannonkeys/instant60/config.h92
-rw-r--r--keyboards/cannonkeys/instant60/halconf.h354
-rw-r--r--keyboards/cannonkeys/instant60/instant60.c1
-rw-r--r--keyboards/cannonkeys/instant60/instant60.h17
-rw-r--r--keyboards/cannonkeys/instant60/keymaps/default/keymap.c48
-rw-r--r--keyboards/cannonkeys/instant60/mcuconf.h176
-rw-r--r--keyboards/cannonkeys/instant60/readme.md12
-rw-r--r--keyboards/cannonkeys/instant60/rules.mk56
-rw-r--r--keyboards/cannonkeys/stm32f072/keyboard.c120
-rw-r--r--keyboards/cannonkeys/stm32f072/keyboard.h23
-rw-r--r--keyboards/cannonkeys/stm32f072/led.c252
-rw-r--r--keyboards/cannonkeys/stm32f072/led_custom.h6
-rw-r--r--keyboards/cannonkeys/stm32f072/ws2812.c150
-rw-r--r--keyboards/cannonkeys/stm32f072/ws2812.h20
20 files changed, 3597 insertions, 0 deletions
diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c
new file mode 100644
index 000000000..9d10fbd75
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c
@@ -0,0 +1,109 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+ {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+ VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+ {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+ VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+ {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+ VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+ {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+ VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+ {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+ VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+ {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+ VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+ {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+ VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+ {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+ VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+ {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ * and before any other initialization.
+ */
+void __early_init(void) {
+ enter_bootloader_mode_if_requested();
+ stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif
+
+/**
+ * @brief Board-specific initialization code.
+ * @todo Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h
new file mode 100644
index 000000000..de3a93d1c
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h
@@ -0,0 +1,922 @@
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK 32768
+#endif
+
+#define STM32_LSEDRV (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK 0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_PIN5 5U
+#define GPIOA_PIN6 6U
+#define GPIOA_PIN7 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_USB_DM 11U
+#define GPIOA_USB_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_PIN3 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_SPI2_SCK 13U
+#define GPIOB_SPI2_MISO 14U
+#define GPIOB_SPI2_MOSI 15U
+
+#define GPIOC_MEMS_CS 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_LED_RED 6U
+#define GPIOC_LED_BLUE 7U
+#define GPIOC_LED_ORANGE 8U
+#define GPIOC_LED_GREEN 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_OSC32_IN 14U
+#define GPIOC_OSC32_OUT 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_OSC_IN 0U
+#define GPIOF_OSC_OUT 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0 - BUTTON (input floating).
+ * PA1 - PIN1 (input pullup).
+ * PA2 - PIN2 (input pullup).
+ * PA3 - PIN3 (input pullup).
+ * PA4 - PIN4 (input pullup).
+ * PA5 - PIN5 (input pullup).
+ * PA6 - PIN6 (input pullup).
+ * PA7 - PIN7 (input pullup).
+ * PA8 - PIN8 (input pullup).
+ * PA9 - PIN9 (input pullup).
+ * PA10 - PIN10 (input pullup).
+ * PA11 - USB_DM (input floating).
+ * PA12 - USB_DP (input floating).
+ * PA13 - SWDIO (alternate 0).
+ * PA14 - SWCLK (alternate 0).
+ * PA15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
+ PIN_MODE_INPUT(GPIOA_PIN1) | \
+ PIN_MODE_INPUT(GPIOA_PIN2) | \
+ PIN_MODE_INPUT(GPIOA_PIN3) | \
+ PIN_MODE_INPUT(GPIOA_PIN4) | \
+ PIN_MODE_INPUT(GPIOA_PIN5) | \
+ PIN_MODE_INPUT(GPIOA_PIN6) | \
+ PIN_MODE_INPUT(GPIOA_PIN7) | \
+ PIN_MODE_INPUT(GPIOA_PIN8) | \
+ PIN_MODE_INPUT(GPIOA_PIN9) | \
+ PIN_MODE_INPUT(GPIOA_PIN10) | \
+ PIN_MODE_INPUT(GPIOA_USB_DM) | \
+ PIN_MODE_INPUT(GPIOA_USB_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
+ PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
+ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
+ PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
+ PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
+ PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
+ PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
+ PIN_ODR_HIGH(GPIOA_PIN1) | \
+ PIN_ODR_HIGH(GPIOA_PIN2) | \
+ PIN_ODR_HIGH(GPIOA_PIN3) | \
+ PIN_ODR_HIGH(GPIOA_PIN4) | \
+ PIN_ODR_HIGH(GPIOA_PIN5) | \
+ PIN_ODR_HIGH(GPIOA_PIN6) | \
+ PIN_ODR_HIGH(GPIOA_PIN7) | \
+ PIN_ODR_HIGH(GPIOA_PIN8) | \
+ PIN_ODR_HIGH(GPIOA_PIN9) | \
+ PIN_ODR_HIGH(GPIOA_PIN10) | \
+ PIN_ODR_HIGH(GPIOA_USB_DM) | \
+ PIN_ODR_HIGH(GPIOA_USB_DP) | \
+ PIN_ODR_HIGH(GPIOA_SWDIO) | \
+ PIN_ODR_HIGH(GPIOA_SWCLK) | \
+ PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
+ PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
+ PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0 - PIN0 (input pullup).
+ * PB1 - PIN1 (input pullup).
+ * PB2 - PIN2 (input pullup).
+ * PB3 - PIN3 (input pullup).
+ * PB4 - PIN4 (input pullup).
+ * PB5 - PIN5 (input pullup).
+ * PB6 - PIN6 (input pullup).
+ * PB7 - PIN7 (input pullup).
+ * PB8 - PIN8 (input pullup).
+ * PB9 - PIN9 (input pullup).
+ * PB10 - PIN10 (input pullup).
+ * PB11 - PIN11 (input pullup).
+ * PB12 - PIN12 (input pullup).
+ * PB13 - SPI2_SCK (alternate 0).
+ * PB14 - SPI2_MISO (alternate 0).
+ * PB15 - SPI2_MOSI (alternate 0).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_INPUT(GPIOB_PIN3) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_INPUT(GPIOB_PIN6) | \
+ PIN_MODE_INPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_PIN9) | \
+ PIN_MODE_INPUT(GPIOB_PIN10) | \
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
+ PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
+ PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN3) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
+ PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
+ PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
+ PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
+ PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
+ PIN_ODR_HIGH(GPIOB_PIN1) | \
+ PIN_ODR_HIGH(GPIOB_PIN2) | \
+ PIN_ODR_HIGH(GPIOB_PIN3) | \
+ PIN_ODR_HIGH(GPIOB_PIN4) | \
+ PIN_ODR_HIGH(GPIOB_PIN5) | \
+ PIN_ODR_HIGH(GPIOB_PIN6) | \
+ PIN_ODR_HIGH(GPIOB_PIN7) | \
+ PIN_ODR_HIGH(GPIOB_PIN8) | \
+ PIN_ODR_HIGH(GPIOB_PIN9) | \
+ PIN_ODR_HIGH(GPIOB_PIN10) | \
+ PIN_ODR_HIGH(GPIOB_PIN11) | \
+ PIN_ODR_HIGH(GPIOB_PIN12) | \
+ PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
+ PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
+ PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
+ PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
+ PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0 - MEMS_CS (output pushpull maximum).
+ * PC1 - PIN1 (input pullup).
+ * PC2 - PIN2 (input pullup).
+ * PC3 - PIN3 (input pullup).
+ * PC4 - PIN4 (input pullup).
+ * PC5 - PIN5 (input pullup).
+ * PC6 - LED_RED (output pushpull maximum).
+ * PC7 - LED_BLUE (output pushpull maximum).
+ * PC8 - LED_ORANGE (output pushpull maximum).
+ * PC9 - LED_GREEN (output pushpull maximum).
+ * PC10 - PIN10 (input pullup).
+ * PC11 - PIN11 (input pullup).
+ * PC12 - PIN12 (input pullup).
+ * PC13 - PIN13 (input pullup).
+ * PC14 - OSC32_IN (input floating).
+ * PC15 - OSC32_OUT (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
+ PIN_MODE_INPUT(GPIOC_PIN1) | \
+ PIN_MODE_INPUT(GPIOC_PIN2) | \
+ PIN_MODE_INPUT(GPIOC_PIN3) | \
+ PIN_MODE_INPUT(GPIOC_PIN4) | \
+ PIN_MODE_INPUT(GPIOC_PIN5) | \
+ PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
+ PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
+ PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
+ PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
+ PIN_MODE_INPUT(GPIOC_PIN10) | \
+ PIN_MODE_INPUT(GPIOC_PIN11) | \
+ PIN_MODE_INPUT(GPIOC_PIN12) | \
+ PIN_MODE_INPUT(GPIOC_PIN13) | \
+ PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
+ PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
+ PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
+ PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
+ PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
+ PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
+ PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
+ PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
+ PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+ PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
+ PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
+ PIN_ODR_HIGH(GPIOC_PIN1) | \
+ PIN_ODR_HIGH(GPIOC_PIN2) | \
+ PIN_ODR_HIGH(GPIOC_PIN3) | \
+ PIN_ODR_HIGH(GPIOC_PIN4) | \
+ PIN_ODR_HIGH(GPIOC_PIN5) | \
+ PIN_ODR_LOW(GPIOC_LED_RED) | \
+ PIN_ODR_LOW(GPIOC_LED_BLUE) | \
+ PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
+ PIN_ODR_LOW(GPIOC_LED_GREEN) | \
+ PIN_ODR_HIGH(GPIOC_PIN10) | \
+ PIN_ODR_HIGH(GPIOC_PIN11) | \
+ PIN_ODR_HIGH(GPIOC_PIN12) | \
+ PIN_ODR_HIGH(GPIOC_PIN13) | \
+ PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
+ PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
+ PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
+ PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
+ PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0 - PIN0 (input pullup).
+ * PD1 - PIN1 (input pullup).
+ * PD2 - PIN2 (input pullup).
+ * PD3 - PIN3 (input pullup).
+ * PD4 - PIN4 (input pullup).
+ * PD5 - PIN5 (input pullup).
+ * PD6 - PIN6 (input pullup).
+ * PD7 - PIN7 (input pullup).
+ * PD8 - PIN8 (input pullup).
+ * PD9 - PIN9 (input pullup).
+ * PD10 - PIN10 (input pullup).
+ * PD11 - PIN11 (input pullup).
+ * PD12 - PIN12 (input pullup).
+ * PD13 - PIN13 (input pullup).
+ * PD14 - PIN14 (input pullup).
+ * PD15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
+ PIN_MODE_INPUT(GPIOD_PIN1) | \
+ PIN_MODE_INPUT(GPIOD_PIN2) | \
+ PIN_MODE_INPUT(GPIOD_PIN3) | \
+ PIN_MODE_INPUT(GPIOD_PIN4) | \
+ PIN_MODE_INPUT(GPIOD_PIN5) | \
+ PIN_MODE_INPUT(GPIOD_PIN6) | \
+ PIN_MODE_INPUT(GPIOD_PIN7) | \
+ PIN_MODE_INPUT(GPIOD_PIN8) | \
+ PIN_MODE_INPUT(GPIOD_PIN9) | \
+ PIN_MODE_INPUT(GPIOD_PIN10) | \
+ PIN_MODE_INPUT(GPIOD_PIN11) | \
+ PIN_MODE_INPUT(GPIOD_PIN12) | \
+ PIN_MODE_INPUT(GPIOD_PIN13) | \
+ PIN_MODE_INPUT(GPIOD_PIN14) | \
+ PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
+ PIN_ODR_HIGH(GPIOD_PIN1) | \
+ PIN_ODR_HIGH(GPIOD_PIN2) | \
+ PIN_ODR_HIGH(GPIOD_PIN3) | \
+ PIN_ODR_HIGH(GPIOD_PIN4) | \
+ PIN_ODR_HIGH(GPIOD_PIN5) | \
+ PIN_ODR_HIGH(GPIOD_PIN6) | \
+ PIN_ODR_HIGH(GPIOD_PIN7) | \
+ PIN_ODR_HIGH(GPIOD_PIN8) | \
+ PIN_ODR_HIGH(GPIOD_PIN9) | \
+ PIN_ODR_HIGH(GPIOD_PIN10) | \
+ PIN_ODR_HIGH(GPIOD_PIN11) | \
+ PIN_ODR_HIGH(GPIOD_PIN12) | \
+ PIN_ODR_HIGH(GPIOD_PIN13) | \
+ PIN_ODR_HIGH(GPIOD_PIN14) | \
+ PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0 - PIN0 (input pullup).
+ * PE1 - PIN1 (input pullup).
+ * PE2 - PIN2 (input pullup).
+ * PE3 - PIN3 (input pullup).
+ * PE4 - PIN4 (input pullup).
+ * PE5 - PIN5 (input pullup).
+ * PE6 - PIN6 (input pullup).
+ * PE7 - PIN7 (input pullup).
+ * PE8 - PIN8 (input pullup).
+ * PE9 - PIN9 (input pullup).
+ * PE10 - PIN10 (input pullup).
+ * PE11 - PIN11 (input pullup).
+ * PE12 - PIN12 (input pullup).
+ * PE13 - PIN13 (input pullup).
+ * PE14 - PIN14 (input pullup).
+ * PE15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
+ PIN_MODE_INPUT(GPIOE_PIN1) | \
+ PIN_MODE_INPUT(GPIOE_PIN2) | \
+ PIN_MODE_INPUT(GPIOE_PIN3) | \
+ PIN_MODE_INPUT(GPIOE_PIN4) | \
+ PIN_MODE_INPUT(GPIOE_PIN5) | \
+ PIN_MODE_INPUT(GPIOE_PIN6) | \
+ PIN_MODE_INPUT(GPIOE_PIN7) | \
+ PIN_MODE_INPUT(GPIOE_PIN8) | \
+ PIN_MODE_INPUT(GPIOE_PIN9) | \
+ PIN_MODE_INPUT(GPIOE_PIN10) | \
+ PIN_MODE_INPUT(GPIOE_PIN11) | \
+ PIN_MODE_INPUT(GPIOE_PIN12) | \
+ PIN_MODE_INPUT(GPIOE_PIN13) | \
+ PIN_MODE_INPUT(GPIOE_PIN14) | \
+ PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
+ PIN_ODR_HIGH(GPIOE_PIN1) | \
+ PIN_ODR_HIGH(GPIOE_PIN2) | \
+ PIN_ODR_HIGH(GPIOE_PIN3) | \
+ PIN_ODR_HIGH(GPIOE_PIN4) | \
+ PIN_ODR_HIGH(GPIOE_PIN5) | \
+ PIN_ODR_HIGH(GPIOE_PIN6) | \
+ PIN_ODR_HIGH(GPIOE_PIN7) | \
+ PIN_ODR_HIGH(GPIOE_PIN8) | \
+ PIN_ODR_HIGH(GPIOE_PIN9) | \
+ PIN_ODR_HIGH(GPIOE_PIN10) | \
+ PIN_ODR_HIGH(GPIOE_PIN11) | \
+ PIN_ODR_HIGH(GPIOE_PIN12) | \
+ PIN_ODR_HIGH(GPIOE_PIN13) | \
+ PIN_ODR_HIGH(GPIOE_PIN14) | \
+ PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0 - OSC_IN (input floating).
+ * PF1 - OSC_OUT (input floating).
+ * PF2 - PIN2 (input pullup).
+ * PF3 - PIN3 (input pullup).
+ * PF4 - PIN4 (input pullup).
+ * PF5 - PIN5 (input pullup).
+ * PF6 - PIN6 (input pullup).
+ * PF7 - PIN7 (input pullup).
+ * PF8 - PIN8 (input pullup).
+ * PF9 - PIN9 (input pullup).
+ * PF10 - PIN10 (input pullup).
+ * PF11 - PIN11 (input pullup).
+ * PF12 - PIN12 (input pullup).
+ * PF13 - PIN13 (input pullup).
+ * PF14 - PIN14 (input pullup).
+ * PF15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
+ PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
+ PIN_MODE_INPUT(GPIOF_PIN2) | \
+ PIN_MODE_INPUT(GPIOF_PIN3) | \
+ PIN_MODE_INPUT(GPIOF_PIN4) | \
+ PIN_MODE_INPUT(GPIOF_PIN5) | \
+ PIN_MODE_INPUT(GPIOF_PIN6) | \
+ PIN_MODE_INPUT(GPIOF_PIN7) | \
+ PIN_MODE_INPUT(GPIOF_PIN8) | \
+ PIN_MODE_INPUT(GPIOF_PIN9) | \
+ PIN_MODE_INPUT(GPIOF_PIN10) | \
+ PIN_MODE_INPUT(GPIOF_PIN11) | \
+ PIN_MODE_INPUT(GPIOF_PIN12) | \
+ PIN_MODE_INPUT(GPIOF_PIN13) | \
+ PIN_MODE_INPUT(GPIOF_PIN14) | \
+ PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
+ PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
+ PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
+ PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
+ PIN_ODR_HIGH(GPIOF_PIN2) | \
+ PIN_ODR_HIGH(GPIOF_PIN3) | \
+ PIN_ODR_HIGH(GPIOF_PIN4) | \
+ PIN_ODR_HIGH(GPIOF_PIN5) | \
+ PIN_ODR_HIGH(GPIOF_PIN6) | \
+ PIN_ODR_HIGH(GPIOF_PIN7) | \
+ PIN_ODR_HIGH(GPIOF_PIN8) | \
+ PIN_ODR_HIGH(GPIOF_PIN9) | \
+ PIN_ODR_HIGH(GPIOF_PIN10) | \
+ PIN_ODR_HIGH(GPIOF_PIN11) | \
+ PIN_ODR_HIGH(GPIOF_PIN12) | \
+ PIN_ODR_HIGH(GPIOF_PIN13) | \
+ PIN_ODR_HIGH(GPIOF_PIN14) | \
+ PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
+ PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
+ PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */
diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk
new file mode 100644
index 000000000..b98dcdd26
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY
diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg
new file mode 100644
index 000000000..9c7cf4fd7
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg
@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+ xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+ xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+ <configuration_settings>
+ <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+ <output_path>..</output_path>
+ <hal_version>3.0.x</hal_version>
+ </configuration_settings>
+ <board_name>ST STM32F072B-Discovery</board_name>
+ <board_id>ST_STM32F072B_DISCOVERY</board_id>
+ <board_functions></board_functions>
+ <subtype>STM32F072xB</subtype>
+ <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+ LSEBypass="false" LSEDrive="3 High Drive (default)" />
+ <ports>
+ <GPIOA>
+ <pin0
+ ID="BUTTON"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin1
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin2
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin3
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin4
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin5
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin6
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin7
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin8
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin9
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin10
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin11
+ ID="USB_DM"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin12
+ ID="USB_DP"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin13
+ ID="SWDIO"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Alternate"
+ Alternate="0" />
+ <pin14
+ ID="SWCLK"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="PullDown"
+ Level="High"
+ Mode="Alternate"
+ Alternate="0" />
+ <pin15
+ ID=""
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ </GPIOA>
+ <GPIOB>
+ <pin0
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin1
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin2
+ ID=""
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin3
+ ID=""
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin4
+ ID=""
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin5
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin6
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin7
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin8
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin9
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin10
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin11
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin12
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin13
+ ID="SPI2_SCK"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Alternate"
+ Alternate="0" />
+ <pin14
+ ID="SPI2_MISO"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Alternate"
+ Alternate="0" />
+ <pin15
+ ID="SPI2_MOSI"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Alternate"
+ Alternate="0" />
+ </GPIOB>
+ <GPIOC>
+ <pin0
+ ID="MEMS_CS"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Output"
+ Alternate="0" />
+ <pin1
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin2
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin3
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin4
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin5
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin6
+ ID="LED_RED"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="Low"
+ Mode="Output"
+ Alternate="0" />
+ <pin7
+ ID="LED_BLUE"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="Low"
+ Mode="Output"
+ Alternate="0" />
+ <pin8
+ ID="LED_ORANGE"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="Low"
+ Mode="Output"
+ Alternate="0" ></pin8>
+ <pin9
+ ID="LED_GREEN"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="Low"
+ Mode="Output"
+ Alternate="0" />
+ <pin10
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin11
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin12
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin13
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin14
+ ID="OSC32_IN"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin15
+ ID="OSC32_OUT"
+ Type="PushPull"
+ Speed="Maximum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ </GPIOC>
+ <GPIOD>
+ <pin0
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin1
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin2
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin3
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin4
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin5
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin6
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin7
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin8
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin9
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin10
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin11
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin12
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin13
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin14
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin15
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ </GPIOD>
+ <GPIOE>
+ <pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ <pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+ Level="High" Mode="Input" Alternate="0" />
+ </GPIOE>
+ <GPIOF>
+ <pin0
+ ID="OSC_IN"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin1
+ ID="OSC_OUT"
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="Floating"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin2
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin3
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin4
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin5
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin6
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin7
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin8
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin9
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin10
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin11
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin12
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin13
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin14
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ <pin15
+ ID=""
+ Type="PushPull"
+ Speed="Minimum"
+ Resistor="PullUp"
+ Level="High"
+ Mode="Input"
+ Alternate="0" />
+ </GPIOF>
+ </ports>
+</board>
diff --git a/keyboards/cannonkeys/instant60/bootloader_defs.h b/keyboards/cannonkeys/instant60/bootloader_defs.h
new file mode 100644
index 000000000..02c48c4e6
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here (page 175):
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
diff --git a/keyboards/cannonkeys/instant60/chconf.h b/keyboards/cannonkeys/instant60/chconf.h
new file mode 100644
index 000000000..99fa8ce39
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/chconf.h
@@ -0,0 +1,524 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/* Use __WFI in the idle thread for waiting. Does lower the power
+ * consumption. */
+#define CORTEX_ENABLE_WFI_IDLE TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE FALSE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP FALSE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS FALSE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/cannonkeys/instant60/config.h b/keyboards/cannonkeys/instant60/config.h
new file mode 100644
index 000000000..d7554c172
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/config.h
@@ -0,0 +1,92 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCA04
+#define PRODUCT_ID 0x1600
+#define DEVICE_VER 0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/* at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER CannonKeys
+#define PRODUCT Instant60
+#define DESCRIPTION Instant 60 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 }
+#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+
+#define WS2812_LED_N 14
+#define RGBLED_NUM WS2812_LED_N
+#define PORT_WS2812 GPIOB
+#define PIN_WS2812 15
+#define WS2812_SPI SPID2
+
+
+// EEPROM usage
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x01
+#define EEPROM_VERSION_ADDR 34
+
+#define EEPROM_CUSTOM_BACKLIGHT 804
+
+
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/cannonkeys/instant60/halconf.h b/keyboards/cannonkeys/instant60/halconf.h
new file mode 100644
index 000000000..38743e090
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/halconf.h
@@ -0,0 +1,354 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM TRUE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 1
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/keyboards/cannonkeys/instant60/instant60.c b/keyboards/cannonkeys/instant60/instant60.c
new file mode 100644
index 000000000..25b7099b0
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/instant60.c
@@ -0,0 +1 @@
+#include "instant60.h"
diff --git a/keyboards/cannonkeys/instant60/instant60.h b/keyboards/cannonkeys/instant60/instant60.h
new file mode 100644
index 000000000..cca1b9a29
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/instant60.h
@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4E \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO}, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, KC_NO, K2E }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, KC_NO, KC_NO }, \
+ { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, KC_NO, K4E } \
+}
diff --git a/keyboards/cannonkeys/instant60/keymaps/default/keymap.c b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c
new file mode 100644
index 000000000..e898a3f3b
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c
@@ -0,0 +1,48 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_default(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
+ ),
+
+ [_FN1] = LAYOUT_default(
+ KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
+ RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ KC_GRV, _______, _______, _______, _______, _______, _______, RESET
+ )
+};
diff --git a/keyboards/cannonkeys/instant60/mcuconf.h b/keyboards/cannonkeys/instant60/mcuconf.h
new file mode 100644
index 000000000..048eb4df6
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/mcuconf.h
@@ -0,0 +1,176 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/cannonkeys/instant60/readme.md b/keyboards/cannonkeys/instant60/readme.md
new file mode 100644
index 000000000..9cd91e951
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/readme.md
@@ -0,0 +1,12 @@
+# Instant60
+
+Instant60 Keyboard
+
+Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1)
+Hardware Supported: STM32F072CBT6
+
+Make example for this keyboard (after setting up your build environment):
+
+ make cannonkeys/instant60:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk
new file mode 100644
index 000000000..cd366c76a
--- /dev/null
+++ b/keyboards/cannonkeys/instant60/rules.mk
@@ -0,0 +1,56 @@
+# project specific files
+# SRC = ssd1306.c
+## chip/board settings
+# the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+# comment out to disable the options.
+#
+
+# project specific files
+VPATH += keyboards/cannonkeys/stm32f072
+SRC = keyboard.c \
+ led.c
+
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
+RGBLIGHT_ENABLE = yes
+
+# RAW_ENABLE = yes
+# DYNAMIC_KEYMAP_ENABLE = yes
+
diff --git a/keyboards/cannonkeys/stm32f072/keyboard.c b/keyboards/cannonkeys/stm32f072/keyboard.c
new file mode 100644
index 000000000..4316d5186
--- /dev/null
+++ b/keyboards/cannonkeys/stm32f072/keyboard.c
@@ -0,0 +1,120 @@
+#include "keyboard.h"
+#include "ch.h"
+#include "hal.h"
+#include "led_custom.h"
+#include "util.h"
+#include "quantum.h"
+
+#include "tmk_core/common/eeprom.h"
+
+#include "ws2812.h"
+
+backlight_config_t kb_backlight_config = {
+ .enable = true,
+ .breathing = true,
+ .level = BACKLIGHT_LEVELS
+};
+
+
+bool eeprom_is_valid(void)
+{
+ return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
+ eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
+}
+
+void eeprom_set_valid(bool valid)
+{
+ eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
+ eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
+}
+
+void eeprom_reset(void)
+{
+ eeprom_set_valid(false);
+ eeconfig_disable();
+}
+
+void save_backlight_config_to_eeprom(){
+ eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
+}
+
+void load_custom_config(){
+ kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
+}
+
+void eeprom_init_kb(void)
+{
+ // If the EEPROM has the magic, the data is good.
+ // OK to load from EEPROM.
+ if (eeprom_is_valid()) {
+ load_custom_config();
+ } else {
+ // Save the magic number last, in case saving was interrupted
+ eeprom_set_valid(true);
+ }
+}
+
+void matrix_init_kb(void){
+ eeprom_init_kb();
+ /* MOSI pin*/
+ palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0));
+ wait_ms(500);
+
+#ifdef RGBLIGHT_ENABLE
+ leds_init();
+#endif
+ backlight_init_ports();
+}
+
+void matrix_scan_kb(void)
+{
+ #ifdef RGBLIGHT_ENABLE
+ rgblight_task();
+ #endif
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case BL_INC:
+ if (record->event.pressed) {
+ kb_backlight_config.level = kb_backlight_config.level + 1;
+ if(kb_backlight_config.level > BACKLIGHT_LEVELS){
+ kb_backlight_config.level = BACKLIGHT_LEVELS;
+ }
+ backlight_set(kb_backlight_config.level);
+ save_backlight_config_to_eeprom();
+ }
+ return false;
+ case BL_TOGG:
+ if (record->event.pressed) {
+ kb_backlight_config.enable = !kb_backlight_config.enable;
+ if(kb_backlight_config.enable){
+ backlight_set(kb_backlight_config.level);
+ } else {
+ backlight_set(0);
+ }
+ save_backlight_config_to_eeprom();
+ }
+ return false;
+
+ case BL_DEC:
+ if (record->event.pressed) {
+ if(kb_backlight_config.level <= 1){
+ kb_backlight_config.level = 0;
+ } else {
+ kb_backlight_config.level = kb_backlight_config.level - 1;
+ }
+ backlight_set(kb_backlight_config.level);
+ save_backlight_config_to_eeprom();
+ }
+ return false;
+ case BL_BRTG:
+ if (record->event.pressed) {
+ kb_backlight_config.breathing = !kb_backlight_config.breathing;
+ breathing_toggle();
+ save_backlight_config_to_eeprom();
+ }
+ return false;
+ }
+ return true;
+}
diff --git a/keyboards/cannonkeys/stm32f072/keyboard.h b/keyboards/cannonkeys/stm32f072/keyboard.h
new file mode 100644
index 000000000..94c973d61
--- /dev/null
+++ b/keyboards/cannonkeys/stm32f072/keyboard.h
@@ -0,0 +1,23 @@
+#pragma once
+
+#include "quantum.h"
+
+typedef union {
+ uint8_t raw;
+ struct {
+ bool enable :1;
+ bool breathing : 1;
+ uint8_t level :6;
+ };
+} backlight_config_t;
+
+// Backlighting
+extern backlight_config_t kb_backlight_config;
+extern bool kb_backlight_breathing;
+void backlight_init_ports(void);
+void backlight_set(uint8_t level);
+bool is_breathing(void);
+void breathing_enable(void);
+void breathing_disable(void);
+void load_custom_config(void);
+void save_backlight_config_to_eeprom(void);
diff --git a/keyboards/cannonkeys/stm32f072/led.c b/keyboards/cannonkeys/stm32f072/led.c
new file mode 100644
index 000000000..d69d94685
--- /dev/null
+++ b/keyboards/cannonkeys/stm32f072/led.c
@@ -0,0 +1,252 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "led_custom.h"
+#include "keyboard.h"
+#include "printf.h"
+
+static void breathing_callback(PWMDriver *pwmp);
+
+static PWMConfig pwmCFG = {
+ 0xFFFF, /* PWM clock frequency */
+ 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+ NULL, /* No Callback */
+ {
+ {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
+ {PWM_OUTPUT_DISABLED, NULL},
+ {PWM_OUTPUT_DISABLED, NULL},
+ {PWM_OUTPUT_DISABLED, NULL}
+ },
+ 0, /* HW dependent part.*/
+ 0
+};
+
+static PWMConfig pwmCFG_breathing = {
+ 0xFFFF, /* 10kHz PWM clock frequency */
+ 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+ breathing_callback, /* Breathing Callback */
+ {
+ {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
+ {PWM_OUTPUT_DISABLED, NULL},
+ {PWM_OUTPUT_DISABLED, NULL},
+ {PWM_OUTPUT_DISABLED, NULL}
+ },
+ 0, /* HW dependent part.*/
+ 0
+};
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+ if (v <= 5243) // if below 8% of max
+ return v / 9; // same as dividing by 900%
+ else {
+ uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+ // to get a useful result with integer division, we shift left in the expression above
+ // and revert what we've done again after squaring.
+ y = y * y * y >> 8;
+ if (y > 0xFFFFUL) // prevent overflow
+ return 0xFFFFU;
+ else
+ return (uint16_t) y;
+ }
+}
+
+
+uint8_t get_backlight_level(void){
+ return kb_backlight_config.level;
+}
+
+void backlight_init_ports(void) {
+ printf("backlight_init_ports()\n");
+ palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1));
+ pwmStart(&PWMD3, &pwmCFG);
+ // pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3, 0xFFFF,cie_lightness(0xFFFF)));
+ if(kb_backlight_config.enable){
+ if(kb_backlight_config.breathing){
+ breathing_enable();
+ } else{
+ backlight_set(kb_backlight_config.level);
+ }
+ } else {
+ backlight_set(0);
+ }
+
+}
+
+void backlight_set(uint8_t level) {
+ printf("backlight_set(%d)\n", level);
+ uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS));
+ printf("duty: (%d)\n", duty);
+ if (level == 0) {
+ // Turn backlight off
+ pwmDisableChannel(&PWMD3, 0);
+ } else {
+ // Turn backlight on
+ if(!is_breathing()){
+ pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty));
+ }
+ }
+}
+
+
+uint8_t backlight_tick = 0;
+
+void backlight_task(void) {
+}
+
+#define BREATHING_NO_HALT 0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON 2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+bool is_breathing(void) {
+ return PWMD3.config == &pwmCFG_breathing;
+}
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
+
+
+void breathing_interrupt_enable(void){
+ pwmStop(&PWMD3);
+ pwmStart(&PWMD3, &pwmCFG_breathing);
+ chSysLockFromISR();
+ pwmEnablePeriodicNotification(&PWMD3);
+ pwmEnableChannelI(
+ &PWMD3,
+ 0,
+ PWM_FRACTION_TO_WIDTH(
+ &PWMD3,
+ 0xFFFF,
+ 0xFFFF
+ )
+ );
+ chSysUnlockFromISR();
+}
+
+void breathing_interrupt_disable(void){
+ pwmStop(&PWMD3);
+ pwmStart(&PWMD3, &pwmCFG);
+}
+
+void breathing_enable(void)
+{
+ breathing_counter = 0;
+ breathing_halt = BREATHING_NO_HALT;
+ breathing_interrupt_enable();
+}
+
+void breathing_pulse(void)
+{
+ if (get_backlight_level() == 0)
+ breathing_min();
+ else
+ breathing_max();
+ breathing_halt = BREATHING_HALT_ON;
+ breathing_interrupt_enable();
+}
+
+void breathing_disable(void)
+{
+ printf("breathing_disable()\n");
+ breathing_interrupt_disable();
+ // Restore backlight level
+ backlight_set(get_backlight_level());
+}
+
+void breathing_self_disable(void)
+{
+ if (get_backlight_level() == 0)
+ breathing_halt = BREATHING_HALT_OFF;
+ else
+ breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+ if (is_breathing()){
+ printf("disable breathing\n");
+ breathing_disable();
+ } else {
+ printf("enable breathing\n");
+ breathing_enable();
+ }
+}
+
+void breathing_period_set(uint8_t value)
+{
+ if (!value)
+ value = 1;
+ breathing_period = value;
+}
+
+void breathing_period_default(void) {
+ breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+ breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+ breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+ return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+static void breathing_callback(PWMDriver *pwmp)
+{
+ (void)pwmp;
+ uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
+ // resetting after one period to prevent ugly reset at overflow.
+ breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
+ uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+ if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+ ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+ {
+ breathing_interrupt_disable();
+ }
+
+ uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
+
+ chSysLockFromISR();
+ pwmEnableChannelI(
+ &PWMD3,
+ 0,
+ PWM_FRACTION_TO_WIDTH(
+ &PWMD3,
+ 0xFFFF,
+ duty
+ )
+ );
+ chSysUnlockFromISR();
+}
diff --git a/keyboards/cannonkeys/stm32f072/led_custom.h b/keyboards/cannonkeys/stm32f072/led_custom.h
new file mode 100644
index 000000000..28e0f02ed
--- /dev/null
+++ b/keyboards/cannonkeys/stm32f072/led_custom.h
@@ -0,0 +1,6 @@
+#pragma once
+
+void backlight_task(void);
+void breathing_interrupt_disable(void);
+void breathing_interrupt_enable(void);
+void breathing_toggle(void);
diff --git a/keyboards/cannonkeys/stm32f072/ws2812.c b/keyboards/cannonkeys/stm32f072/ws2812.c
new file mode 100644
index 000000000..665763931
--- /dev/null
+++ b/keyboards/cannonkeys/stm32f072/ws2812.c
@@ -0,0 +1,150 @@
+#include "ch.h"
+#include "hal.h"
+
+#include "ws2812.h"
+
+#define BYTES_FOR_LED_BYTE 4
+#define NB_COLORS 3
+#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
+#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
+#define RESET_SIZE 200
+
+// Define the spi your LEDs are plugged to here
+#define LEDS_SPI WS2812_SPI
+// Define the number of LEDs you wish to control in your LED strip
+#define NB_LEDS RGBLED_NUM
+
+#define LED_SPIRAL 0
+
+static uint8_t txbuf[DATA_SIZE + RESET_SIZE];
+static uint8_t get_protocol_eq(uint8_t data, int pos);
+
+/*
+ * This lib is meant to be used asynchronously, thus the colors contained in
+ * the txbuf will be sent in loop, so that the colors are always the ones you
+ * put in the table (the user thus have less to worry about)
+ *
+ * Since the data are sent via DMA, and the call to spiSend is a blocking one,
+ * the processor ressources are not used to much, if you see your program being
+ * too slow, simply add a:
+ * chThdSleepMilliseconds(x);
+ * after the spiSend, where you increment x untill you are satisfied with your
+ * program speed, another trick may be to lower this thread priority : your call
+ */
+static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
+static THD_FUNCTION(ledsThread, arg) {
+ (void) arg;
+ while(1){
+ spiSend(&LEDS_SPI, DATA_SIZE + RESET_SIZE, txbuf);
+ }
+}
+
+#if LED_SPIRAL
+/*
+ * 'Led spiral' is a simple demo in which we put all the leds to the same
+ * color, where this color does all the hsv circle in loop.
+ * If you want to launch the thread that will chage the led colors to the
+ * appropriate value, simply set LED_SPIRAL to 1.
+ */
+
+static THD_WORKING_AREA(HSVTRANS_WA, 128);
+static THD_FUNCTION(hsv_transThread, arg) {
+ (void) arg;
+ hsv_color color = {0, 255, 255};
+ while(1){
+ color.h += 1;
+ color.h %= 256;
+ set_leds_color_hsv(color);
+ chThdSleepMilliseconds(50);
+ }
+}
+#endif
+
+static const SPIConfig spicfg = {
+ NULL,
+ GPIOB,
+ 15,
+ SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
+};
+
+/*
+ * Function used to initialize the driver.
+ *
+ * Starts by shutting off all the LEDs.
+ * Then gets access on the LED_SPI driver.
+ * May eventually launch an animation on the LEDs (e.g. a thread setting the
+ * txbuff values)
+ */
+void leds_init(void){
+ for(int i = 0; i < RESET_SIZE; i++)
+ txbuf[DATA_SIZE+i] = 0x00;
+ spiAcquireBus(&LEDS_SPI); /* Acquire ownership of the bus. */
+ spiStart(&LEDS_SPI, &spicfg); /* Setup transfer parameters. */
+ spiSelect(&LEDS_SPI); /* Slave Select assertion. */
+ chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
+#if LED_SPIRAL
+ chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
+ NORMALPRIO, hsv_transThread, NULL);
+#endif
+}
+
+/*
+ * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
+ * the ws2812b protocol, we use this helper function to translate bytes into
+ * 0s and 1s for the LED (with the appropriate timing).
+ */
+static uint8_t get_protocol_eq(uint8_t data, int pos){
+ uint8_t eq = 0;
+ if (data & (1 << (2*(3-pos))))
+ eq = 0b1110;
+ else
+ eq = 0b1000;
+ if (data & (2 << (2*(3-pos))))
+ eq += 0b11100000;
+ else
+ eq += 0b10000000;
+ return eq;
+}
+
+//
+///*
+// * If you want to set a LED's color in the RGB color space, simply call this
+// * function with a hsv_color containing the desired color and the index of the
+// * led on the LED strip (starting from 0, the first one being the closest the
+// * first plugged to the board)
+// *
+// * Only set the color of the LEDs through the functions given by this API
+// * (unless you really know what you are doing)
+// */
+void set_led_color_rgb(LED_TYPE color, int pos){
+ for(int j = 0; j < 4; j++)
+ txbuf[BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
+ for(int j = 0; j < 4; j++)
+ txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
+ for(int j = 0; j < 4; j++)
+ txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
+}
+
+
+void WS2812_init(void) {
+ leds_init();
+}
+
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
+ uint8_t i = 0;
+ while (i < number_of_leds) {
+ set_led_color_rgb(ledarray[i], i);
+ i++;
+ }
+}
+
+
+void set_leds_color_rgb(LED_TYPE color){
+ for(int i = 0; i < NB_LEDS; i++)
+ set_led_color_rgb(color, i);
+}
+
+
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
+
+}
diff --git a/keyboards/cannonkeys/stm32f072/ws2812.h b/keyboards/cannonkeys/stm32f072/ws2812.h
new file mode 100644
index 000000000..3b61ddcfa
--- /dev/null
+++ b/keyboards/cannonkeys/stm32f072/ws2812.h
@@ -0,0 +1,20 @@
+#pragma once
+
+#include "hal.h"
+#include "rgblight_types.h"
+
+
+void set_leds_color_rgb(LED_TYPE color);
+void set_led_color_rgb(LED_TYPE color, int pos);
+void leds_init(void);
+
+
+ // This is what users will use to interface with this
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
+
+
+void WS2812_init(void);
+void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue );
+void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void WS2812_send_colors(void);