aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/converter/ibm_5291/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/converter/ibm_5291/readme.md')
-rw-r--r--keyboards/converter/ibm_5291/readme.md12
1 files changed, 7 insertions, 5 deletions
diff --git a/keyboards/converter/ibm_5291/readme.md b/keyboards/converter/ibm_5291/readme.md
index 06ae2e994..03406d3f9 100644
--- a/keyboards/converter/ibm_5291/readme.md
+++ b/keyboards/converter/ibm_5291/readme.md
@@ -1,6 +1,6 @@
# IBM 5291 keyboard converter
-![5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard)
+[IBM 5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard)
A converter for the eponymous keyboard.
@@ -14,7 +14,7 @@ Make example for this keyboard (after setting up your build environment):
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-the pinout is as follows:
+The pinout is as follows:
IBM−5291−Cable to Pinhead−14
@@ -35,7 +35,8 @@ IBM−5291−Cable to Pinhead−14
13| Strobe
14| Out
-the pins on this connector are organized ![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image)
+The pins on this connector are organized
+![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image)
IBM−5291−2 Cable with DB15M connector
@@ -55,10 +56,11 @@ IBM−5291−2 Cable with DB15M connector
|14 | PE
|15 | NC
-the above connector is actually numbered so it should be easier to determine
+The above connector is actually numbered so it should be easier to determine
where the needed connections are.
-to connect to the teensy, the following are pins are needed (if you should choose not set your own):
+To connect to the teensy, the following are pins are needed (if you should choose not set your own):
+
* PB0 -> PB6 are connected to D0 -> D6
* +5V is connected to the corresponding teensy pin
* gnd is as well, only one of the gnd pins needs to be connected though.