diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/foostan')
| -rw-r--r-- | keyboards/crkbd/keymaps/foostan/config.h | 44 | ||||
| -rw-r--r-- | keyboards/crkbd/keymaps/foostan/keymap.c | 241 | ||||
| -rw-r--r-- | keyboards/crkbd/keymaps/foostan/rules.mk | 10 |
3 files changed, 295 insertions, 0 deletions
diff --git a/keyboards/crkbd/keymaps/foostan/config.h b/keyboards/crkbd/keymaps/foostan/config.h new file mode 100644 index 000000000..644e81365 --- /dev/null +++ b/keyboards/crkbd/keymaps/foostan/config.h @@ -0,0 +1,44 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/crkbd/keymaps/foostan/keymap.c b/keyboards/crkbd/keymaps/foostan/keymap.c new file mode 100644 index 000000000..5235b7836 --- /dev/null +++ b/keyboards/crkbd/keymaps/foostan/keymap.c @@ -0,0 +1,241 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + BACKLIT, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD +#define KC_GUIEI GUI_T(KC_LANG2) +#define KC_ALTKN ALT_T(KC_LANG1) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ESC,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LCTL, F1, F2, F3, F4, F5, LEFT, DOWN, UP, RIGHT, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LCTL, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} diff --git a/keyboards/crkbd/keymaps/foostan/rules.mk b/keyboards/crkbd/keymaps/foostan/rules.mk new file mode 100644 index 000000000..f84e5b2af --- /dev/null +++ b/keyboards/crkbd/keymaps/foostan/rules.mk @@ -0,0 +1,10 @@ + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ |