diff options
Diffstat (limited to 'keyboards/hadron')
28 files changed, 1720 insertions, 0 deletions
diff --git a/keyboards/hadron/Makefile b/keyboards/hadron/Makefile new file mode 100644 index 000000000..e0e1cc6fb --- /dev/null +++ b/keyboards/hadron/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = ver2 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h new file mode 100644 index 000000000..0c19d6c79 --- /dev/null +++ b/keyboards/hadron/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define MANUFACTURER ishtob +#define PRODUCT Hadron Keyboard +#define DESCRIPTION A cherry ML ortholinear keyboard + + + + +//#define AUDIO_VOICES + +//#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +#ifdef SUBPROJECT_ver0 + #include "ver0/config.h" +#endif +#ifdef SUBPROJECT_ver2 + #include "ver2/config.h" +#endif + +#endif diff --git a/keyboards/hadron/hadron.c b/keyboards/hadron/hadron.c new file mode 100644 index 000000000..ca5b20e89 --- /dev/null +++ b/keyboards/hadron/hadron.c @@ -0,0 +1,26 @@ +#include "hadron.h" + + +void matrix_init_kb(void) { + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +}
\ No newline at end of file diff --git a/keyboards/hadron/hadron.h b/keyboards/hadron/hadron.h new file mode 100644 index 000000000..fceae50d9 --- /dev/null +++ b/keyboards/hadron/hadron.h @@ -0,0 +1,30 @@ +#ifndef HADRON_H +#define HADRON_H + +#ifdef SUBPROJECT_ver0 + #include "ver0.h" +#endif +#ifdef SUBPROJECT_ver2 + #include "ver2.h" +#endif + +#include "quantum.h" + + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \ + ) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, KC_NO, KC_NO, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E } \ +} + + +#endif diff --git a/keyboards/hadron/i2c.c b/keyboards/hadron/i2c.c new file mode 100644 index 000000000..cd2b835d5 --- /dev/null +++ b/keyboards/hadron/i2c.c @@ -0,0 +1,166 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} + + + +#endif diff --git a/keyboards/hadron/i2c.h b/keyboards/hadron/i2c.h new file mode 100644 index 000000000..2bd7f4096 --- /dev/null +++ b/keyboards/hadron/i2c.h @@ -0,0 +1,49 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 800000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/hadron/keymaps/default/Makefile b/keyboards/hadron/keymaps/default/Makefile new file mode 100644 index 000000000..e24ba04b5 --- /dev/null +++ b/keyboards/hadron/keymaps/default/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/default/config.h b/keyboards/hadron/keymaps/default/config.h new file mode 100644 index 000000000..0f349ad93 --- /dev/null +++ b/keyboards/hadron/keymaps/default/config.h @@ -0,0 +1,21 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING +#define PREVENT_STUCK_MODIFIERS + +#define USE_I2C +#define SSD1306OLED +#define OLED_ROTATE180 + +/* ws2812 RGB LED*/ +#define RGB_DI_PIN D4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#endif diff --git a/keyboards/hadron/keymaps/default/keymap.c b/keyboards/hadron/keymaps/default/keymap.c new file mode 100644 index 000000000..01cc8abab --- /dev/null +++ b/keyboards/hadron/keymaps/default/keymap.c @@ -0,0 +1,496 @@ +#include "hadron.h" +#include "bootloader.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "LUFA/Drivers/Peripheral/TWI.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef USE_I2C +#include "i2c.h" +#endif +#ifdef SSD1306OLED +#include "ssd1306.h" +#endif +extern keymap_config_t keymap_config; + +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MOUSECURSOR 8 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_DEMOMACRO, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl +#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise +#define DEMOMACRO M(KC_DEMOMACRO) // Sample for macros + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | DEL | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | E | R | T | 7 | 8 | 9 | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | 4 | 5 | 6 | H | J | K | L | ;/Nav| ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | 1 | 2 | 3 | N | M | , | . | / |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_H, KC_J, KC_K, KC_L,LT_MC(KC_SCLN), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT,KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | F | P | G | 7 | 8 | 9 | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | CAPS | A | R | S | T | D | 4 | 5 | 6 | H | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | 1 | 2 | 3 | K | M | , | . | / |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_P7, KC_P8, KC_P9, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_LCTRL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_P4, KC_P5, KC_P6, KC_H, KC_N, KC_E, KC_I, LT_MC(KC_O), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + +/* Dvorak + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | " | , | . | P | Y | 7 | 8 | 9 | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Esc | A | O | E | U | I | 4 | 5 | 6 | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | 1 | 2 | 3 | B | M | W | V | Z |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_P7, KC_P8, KC_P9, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_P4, KC_P5, KC_P6, KC_D, KC_H, KC_T, KC_N, LT_MC(KC_S), KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_P1, KC_P2, KC_P3, KC_B, KC_M, KC_W, KC_V, KC_Z, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,------+------+------+------+------+------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Mouse Layer (semi-col) + * ,------+------+------+------+------+------------------------------------------------. + * | ACCL0| ACCL1| ACCL2| | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro| | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | | | | BTN1 | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ + +[_MOUSECURSOR] = KEYMAP( + KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \ + _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______ \ +), + +/* Adjust (Lower + Raise) + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\ +) + + + +}; + + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +// define variables for reactive RGB +bool RGB_INIT = false; +bool TOG_STATUS = false; +int RGB_current_mode; + + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + rgblight_mode(RGB_current_mode); + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(16); + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(15); + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case RGB_MOD: + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef USE_I2C + i2c_master_init(); + #ifdef SSD1306OLED + // calls code for the SSD1306 OLED + _delay_ms(400); + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display + #endif + #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + iota_gfx_task(); // this is what updates the display continuously + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{cc + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_DEMOMACRO: + if (record->event.pressed){ + return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + } + + return MACRO_NONE; +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +} + diff --git a/keyboards/hadron/keymaps/default/readme.md b/keyboards/hadron/keymaps/default/readme.md new file mode 100644 index 000000000..de9680b49 --- /dev/null +++ b/keyboards/hadron/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/hadron/keymaps/readme.md b/keyboards/hadron/keymaps/readme.md new file mode 100644 index 000000000..54fb5f6d9 --- /dev/null +++ b/keyboards/hadron/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Planck keymaps + +* **default** default Planck layout +* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/side_numpad/Makefile b/keyboards/hadron/keymaps/side_numpad/Makefile new file mode 100644 index 000000000..5cdc186cd --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +ONEHAND_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h new file mode 100644 index 000000000..0f349ad93 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/config.h @@ -0,0 +1,21 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING +#define PREVENT_STUCK_MODIFIERS + +#define USE_I2C +#define SSD1306OLED +#define OLED_ROTATE180 + +/* ws2812 RGB LED*/ +#define RGB_DI_PIN D4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#endif diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/keymaps/side_numpad/keymap.c new file mode 100644 index 000000000..a5ccfd022 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/keymap.c @@ -0,0 +1,505 @@ +#include "hadron.h" +#include "bootloader.h" +#include "action_layer.h" +#include "eeconfig.h" +#include "LUFA/Drivers/Peripheral/TWI.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef USE_I2C +#include "i2c.h" +#endif +#ifdef SSD1306OLED +#include "ssd1306.h" +#endif +extern keymap_config_t keymap_config; + +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 3 +#define _RAISE 4 +#define _FNLAYER 6 +#define _NUMLAY 7 +#define _MOUSECURSOR 8 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_DEMOMACRO, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl +#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_FN(kc) LT(_FNLAYER, kc) // L-ayer T-ap Function Layer +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise +#define TG_NUMLAY TG(_NUMLAY) //Toggle for layer _NUMLAY +#define DEMOMACRO M(KC_DEMOMACRO) // My login macros + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | 7 | 8 | 9 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | H | J | K | L | ; |Enter | 4 | 5 | 6 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | = | 1 | 2 | 3 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ~ | Ctrl | Alt | GUI |Lower |Space |Space |Raise | RAlt | Ins | Del |NumLay| 0 | . | ENT | + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_P7, KC_P8, KC_P9, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT_MC(KC_SCLN), CTL_ENT, KC_P4, KC_P5, KC_P6, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_EQL, KC_P1, KC_P2, KC_P3, \ + KC_GRV, KC_RCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_RALT, KC_INS, KC_DEL, TG_NUMLAY, KC_P0, KC_PDOT, KC_PENT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | CAPS | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | [ | ] | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( + KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, KC_BSLS, _______, _______, _______, \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ~ | \ | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | | A | Up | D | PrSc | | 4 | 5 | 6 | * | : | ' | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | Lt | Dn | Rt | Mute | | 1 | 2 | 3 | Up | / | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | |Space | 0 | | Left | Down | Right| | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PLUS, KC_BSLS, _______, _______, _______, \ + _______, KC_A, KC_UP, KC_D, KC_PSCR, _______, KC_4, KC_5, KC_6, KC_PAST, KC_COLN, KC_QUOT, _______, _______, _______, \ + _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______, KC_1, KC_2, KC_3, KC_UP, KC_SLSH, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_SPC, KC_0, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______ \ +), + +/* FN layer on Esc key + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | + | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | [ | ] | ' | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | { | } | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_FNLAYER] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \ +), + +/* Num Layer + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | | | | | | | | F7 | F8 | F9 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | F4 | F5 | F6 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | Up | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Exit | Left | Down | Rght | + * `--------------------------------------------------------------------------------------------------------' + */ +[_NUMLAY] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PMNS, KC_UP, KC_PPLS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \ +), + +/* Mouse Layer (semi-col) + * ,-----------------------------------------------------------------------------------. + * | |ACCL0| ACCL1| ACCL2 | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | | | | BTN1 | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ + +[_MOUSECURSOR] = KEYMAP( + _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______,\ + _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, _______, \ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* Adjust (Lower + Raise) + + * ,-----------------------------------------------------------------------------------. + * | Reset| | | | | | | | | VolD | VolU | Mute | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | Del | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty| | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | BL + |BL ST |BLSTEP| BL TG| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \ + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_DEL, _______, _______, _______, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + + +}; + + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +// define variables for reactive RGB +bool RGB_INIT = false; +bool TOG_STATUS = false; +bool NUMLAY_STATUS = false; +int RGB_current_mode; + + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + rgblight_mode(RGB_current_mode); + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(16); + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + rgblight_mode(15); + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode + case TG_NUMLAY: + if (record->event.pressed) { + if (RGB_INIT) {} else { + RGB_current_mode = rgblight_config.mode; + RGB_INIT = true; + } + NUMLAY_STATUS = !NUMLAY_STATUS; + if (NUMLAY_STATUS) { + rgblight_mode(4); + layer_on(_NUMLAY); + } else { + rgblight_mode(RGB_current_mode); + layer_off(_NUMLAY); } + } + return false; + break; + case RGB_MOD: + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef USE_I2C + i2c_master_init(); + #ifdef SSD1306OLED + // calls code for the SSD1306 OLED + _delay_ms(400); + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display + #endif + #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + iota_gfx_task(); // this is what updates the display continuously + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{cc + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_DEMOMACRO: + if (record->event.pressed){ + return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + } + + return MACRO_NONE; +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +} diff --git a/keyboards/hadron/keymaps/side_numpad/readme.md b/keyboards/hadron/keymaps/side_numpad/readme.md new file mode 100644 index 000000000..de9680b49 --- /dev/null +++ b/keyboards/hadron/keymaps/side_numpad/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/hadron/out.txt b/keyboards/hadron/out.txt new file mode 100644 index 000000000..644a6a777 --- /dev/null +++ b/keyboards/hadron/out.txt @@ -0,0 +1,66 @@ +-------- begin -------- +avr-gcc.exe (AVR_8_bit_GNU_Toolchain_3.5.0_1662) 4.9.2 +Copyright (C) 2014 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +Compiling: ../../keyboards/planck/planck.c [32;01m[OK][0m +Compiling: ../../keyboards/planck/keymaps/experimental/keymap.c [33;01m[WARNINGS][0m + | + | ../../keyboards/planck/keymaps/experimental/keymap.c: In function 'action_get_macro': + | ../../keyboards/planck/keymaps/experimental/keymap.c:227:17: warning: implicit declaration of function 'breathing_speed_set' [-Wimplicit-function-declaration] + | breathing_speed_set(2); + | ^ + | ../../keyboards/planck/keymaps/experimental/keymap.c:228:17: warning: implicit declaration of function 'breathing_pulse' [-Wimplicit-function-declaration] + | breathing_pulse(); + | ^ + | +Compiling: ../../quantum/quantum.c [32;01m[OK][0m +Compiling: ../../quantum/keymap.c [32;01m[OK][0m +Compiling: ../../quantum/keycode_config.c [32;01m[OK][0m +Compiling: ../../quantum/matrix.c [32;01m[OK][0m +Compiling: ../../quantum/audio/audio.c [32;01m[OK][0m +Compiling: ../../quantum/audio/voices.c [32;01m[OK][0m +Compiling: ../../quantum/audio/luts.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/lufa.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/descriptor.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c [32;01m[OK][0m +Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/host.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/keyboard.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_tapping.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_macro.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_layer.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/action_util.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/print.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/debug.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/util.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/suspend.c [32;01m[OK][0m +Assembling: ../../tmk_core/common/avr/xprintf.S [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/timer.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/bootloader.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/magic.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/avr/eeconfig.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/mousekey.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/command.c [32;01m[OK][0m +Compiling: ../../tmk_core/common/backlight.c [32;01m[OK][0m +Linking: .build/planck_experimental.elf [31;01m[ERRORS][0m + | + | .build/obj_planck_experimental/keyboards/planck/keymaps/experimental/keymap.o: In function `action_get_macro': + | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:240: undefined reference to `breathing_speed_set' + | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:241: undefined reference to `breathing_pulse' + | collect2.exe: error: ld returned 1 exit status + | diff --git a/keyboards/hadron/readme.md b/keyboards/hadron/readme.md new file mode 100644 index 000000000..8b1378917 --- /dev/null +++ b/keyboards/hadron/readme.md @@ -0,0 +1 @@ + diff --git a/keyboards/hadron/rules.mk b/keyboards/hadron/rules.mk new file mode 100644 index 000000000..78f86f982 --- /dev/null +++ b/keyboards/hadron/rules.mk @@ -0,0 +1,72 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +SRC = i2c.c \ + ssd1306.c + diff --git a/keyboards/hadron/ver0/Makefile b/keyboards/hadron/ver0/Makefile new file mode 100644 index 000000000..191c6bb66 --- /dev/null +++ b/keyboards/hadron/ver0/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver0/config.h b/keyboards/hadron/ver0/config.h new file mode 100644 index 000000000..039d4f1c7 --- /dev/null +++ b/keyboards/hadron/ver0/config.h @@ -0,0 +1,35 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef VER0_CONFIG_H +#define VER0_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* Hadron Ver0 PCB default pin-out */ +#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 } +#define MATRIX_COL_PINS { F6, F7, C6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 } +#define UNUSED_PINS + + +#endif diff --git a/keyboards/hadron/ver0/rules.mk b/keyboards/hadron/ver0/rules.mk new file mode 100644 index 000000000..0f9667a8a --- /dev/null +++ b/keyboards/hadron/ver0/rules.mk @@ -0,0 +1,5 @@ +#AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver0/ver0.c b/keyboards/hadron/ver0/ver0.c new file mode 100644 index 000000000..acb3a9105 --- /dev/null +++ b/keyboards/hadron/ver0/ver0.c @@ -0,0 +1 @@ +#include "ver0.h"
\ No newline at end of file diff --git a/keyboards/hadron/ver0/ver0.h b/keyboards/hadron/ver0/ver0.h new file mode 100644 index 000000000..5710af322 --- /dev/null +++ b/keyboards/hadron/ver0/ver0.h @@ -0,0 +1,6 @@ +#ifndef VER0_H +#define VER0_H + +#include "../hadron.h" + +#endif
\ No newline at end of file diff --git a/keyboards/hadron/ver2/Makefile b/keyboards/hadron/ver2/Makefile new file mode 100644 index 000000000..191c6bb66 --- /dev/null +++ b/keyboards/hadron/ver2/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h new file mode 100644 index 000000000..71a0ab5b3 --- /dev/null +++ b/keyboards/hadron/ver2/config.h @@ -0,0 +1,35 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef VER2_CONFIG_H +#define VER2_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0002 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* Hadron Ver0 PCB default pin-out */ +#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 } +#define MATRIX_COL_PINS { F6, F7, D6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 } +#define UNUSED_PINS + + +#endif diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk new file mode 100644 index 000000000..0f9667a8a --- /dev/null +++ b/keyboards/hadron/ver2/rules.mk @@ -0,0 +1,5 @@ +#AUDIO_ENABLE ?= yes # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c new file mode 100644 index 000000000..bc0917746 --- /dev/null +++ b/keyboards/hadron/ver2/ver2.c @@ -0,0 +1 @@ +#include "ver2.h"
\ No newline at end of file diff --git a/keyboards/hadron/ver2/ver2.h b/keyboards/hadron/ver2/ver2.h new file mode 100644 index 000000000..54e141ffa --- /dev/null +++ b/keyboards/hadron/ver2/ver2.h @@ -0,0 +1,6 @@ +#ifndef VER2_H +#define VER2_H + +#include "../hadron.h" + +#endif
\ No newline at end of file |