4 files changed, 146 insertions, 0 deletions
diff --git a/keyboards/handwired/bento/rev1/config.h b/keyboards/handwired/bento/rev1/config.h
new file mode 100644
index 000000000..9bb7ef666
--- /dev/null
+++ b/keyboards/handwired/bento/rev1/config.h
@@ -0,0 +1,59 @@
+/* Copyright 2020 GhostSeven <work@ghost7.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xDAD3
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    GhostSeven
+#define PRODUCT         Bento Macropad Rev. 1
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+    { D7, B1, D2 }, \
+    { E6, B4, B2 } \
+}
+
+#define ENCODERS_PAD_A { D1 }
+#define ENCODERS_PAD_B { D0 }
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 4
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  /*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
diff --git a/keyboards/handwired/bento/rev1/rev1.c b/keyboards/handwired/bento/rev1/rev1.c
new file mode 100644
index 000000000..8f195d3ef
--- /dev/null
+++ b/keyboards/handwired/bento/rev1/rev1.c
@@ -0,0 +1,28 @@
+/* Copyright 2020 GhostSeven <work@ghost7.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev1.h"
+
+void eeconfig_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable(); // Enable RGB by default
+    rgblight_sethsv(0, 255, 255);  // Set default HSV - red hue, full saturation, full brightness
+#ifdef RGBLIGHT_ANIMATIONS
+    rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default
+#endif
+#endif
+
+    eeconfig_init_user();
+}
diff --git a/keyboards/handwired/bento/rev1/rev1.h b/keyboards/handwired/bento/rev1/rev1.h
new file mode 100644
index 000000000..a0b8ce279
--- /dev/null
+++ b/keyboards/handwired/bento/rev1/rev1.h
@@ -0,0 +1,36 @@
+/* Copyright 2020 GhostSeven <work@ghost7.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "bento.h"
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    KA1, KA2, KA3, \
+    KB1, KB2, KB3 \
+) \
+{ \
+    { KA1, KA2, KA3 }, \
+    { KB1, KB2, KB3 } \
+}
diff --git a/keyboards/handwired/bento/rev1/rules.mk b/keyboards/handwired/bento/rev1/rules.mk
new file mode 100644
index 000000000..f7e3ef1e9
--- /dev/null
+++ b/keyboards/handwired/bento/rev1/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes