aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/ms_sculpt_mobile/rules.mk
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/ms_sculpt_mobile/rules.mk')
-rw-r--r--keyboards/handwired/ms_sculpt_mobile/rules.mk56
1 files changed, 56 insertions, 0 deletions
diff --git a/keyboards/handwired/ms_sculpt_mobile/rules.mk b/keyboards/handwired/ms_sculpt_mobile/rules.mk
new file mode 100644
index 000000000..680c057d3
--- /dev/null
+++ b/keyboards/handwired/ms_sculpt_mobile/rules.mk
@@ -0,0 +1,56 @@
+
+## Project specific files
+SRC= babblePaste.c
+
+
+ifdef ASTAR
+ CFLAGS=-D ASTAR
+ MCU = atmega32u4
+ SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \
+ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+else
+ MCU = at90usb1286
+ SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+endif
+
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+ifdef ASTAR
+ BOOTLOADER = caterina
+else
+ BOOTLOADER = atmel-dfu
+endif
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+
+
+USB = /dev/cu.usbmodem14141
+
+
+
+# upload: build
+# $(SCULPT_UPLOAD_COMMAND)