aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/rs60/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/rs60/README.md')
-rw-r--r--keyboards/handwired/rs60/README.md27
1 files changed, 27 insertions, 0 deletions
diff --git a/keyboards/handwired/rs60/README.md b/keyboards/handwired/rs60/README.md
new file mode 100644
index 000000000..07c967e27
--- /dev/null
+++ b/keyboards/handwired/rs60/README.md
@@ -0,0 +1,27 @@
+# rs60: Handwired Slim Preonic Clone
+
+I wanted a preonic layout but with a very low profile. As Jack is still working on the Preonic PCB for Kailh Choc switches, I figured I could try to handwire one myself. It's my first custom keyboard, so I had a lot to learn.
+
+First I designed the case in fusion 360. I wanted to build it using acrylic, constrained myself to standard acrylic sheet thickness.
+
+![](https://imgur.com/NscS7Rd.jpg)
+
+You can download the model [here](https://a360.co/2OqiKLm).
+
+To test my design I 3D printed the parts.
+
+![](https://imgur.com/MSF7zLS.jpg)
+
+The result was encouraging, so I decided to build a prototype out of the printed plates using Kailh Choc brown switches. I tried to make the handwiring job as flat as possible so it can fit in my design.
+
+![](https://i.imgur.com/67yZx0V.jpg)
+![](https://i.imgur.com/ft72Cgj.jpg)
+
+I designed switch plate and the middle plates so that they would be glued together. The middle plate has inserts to attach the bottom plate using m8 screws.
+
+![](https://i.imgur.com/GstTohI.jpg)
+
+The end result is not too bad, but there is a few things I would do differently. Gluing 3D printed plates wasn't a good idea. The switch layer is so thin, that it bends when all the switches are slotted. As a result, the keyboard is not entirely flat. I will replace the bottom plate by a metal one so I get more weight and rigidity.
+
+Even with acrylic, I think I will have the same issue. I might switch to screws + bolts that go all the way through.
+