aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/handwired
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired')
-rw-r--r--keyboards/handwired/pilcrow/Makefile3
-rw-r--r--keyboards/handwired/pilcrow/config.h162
-rw-r--r--keyboards/handwired/pilcrow/keymaps/default/Makefile21
-rw-r--r--keyboards/handwired/pilcrow/keymaps/default/config.h8
-rw-r--r--keyboards/handwired/pilcrow/keymaps/default/keymap.c88
-rw-r--r--keyboards/handwired/pilcrow/keymaps/default/readme.md1
-rw-r--r--keyboards/handwired/pilcrow/pilcrow.c28
-rw-r--r--keyboards/handwired/pilcrow/pilcrow.h23
-rw-r--r--keyboards/handwired/pilcrow/readme.md28
-rw-r--r--keyboards/handwired/pilcrow/rules.mk67
-rw-r--r--keyboards/handwired/promethium/config.h12
-rw-r--r--keyboards/handwired/promethium/keymaps/priyadi/Makefile7
-rwxr-xr-xkeyboards/handwired/promethium/keymaps/priyadi/flash.sh1
-rw-r--r--keyboards/handwired/promethium/keymaps/priyadi/keymap.c146
-rw-r--r--keyboards/handwired/promethium/promethium.h108
-rw-r--r--keyboards/handwired/promethium/rules.mk5
16 files changed, 612 insertions, 96 deletions
diff --git a/keyboards/handwired/pilcrow/Makefile b/keyboards/handwired/pilcrow/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/handwired/pilcrow/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h
new file mode 100644
index 000000000..d63eeba36
--- /dev/null
+++ b/keyboards/handwired/pilcrow/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER You
+#define PRODUCT pilcrow
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B4, F7, B1, B3 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6, F5, F6, B6, B2, F4, B5}
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/pilcrow/keymaps/default/Makefile b/keyboards/handwired/pilcrow/keymaps/default/Makefile
new file mode 100644
index 000000000..f4671a9d1
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif \ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/keymaps/default/config.h b/keyboards/handwired/pilcrow/keymaps/default/config.h
new file mode 100644
index 000000000..df06a2620
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/keymaps/default/keymap.c b/keyboards/handwired/pilcrow/keymaps/default/keymap.c
new file mode 100644
index 000000000..e382e4c6a
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/keymap.c
@@ -0,0 +1,88 @@
+#include "pilcrow.h"
+#define _______ KC_TRNS
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( \
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \
+ KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[1] = KEYMAP( \
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+ KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \
+ _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \
+),
+[2] = KEYMAP( \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \
+ KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \
+ OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \
+ _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[3] = KEYMAP( \
+ RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \
+ KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \
+ _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+} \ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/keymaps/default/readme.md b/keyboards/handwired/pilcrow/keymaps/default/readme.md
new file mode 100644
index 000000000..95472dfca
--- /dev/null
+++ b/keyboards/handwired/pilcrow/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for pilcrow \ No newline at end of file
diff --git a/keyboards/handwired/pilcrow/pilcrow.c b/keyboards/handwired/pilcrow/pilcrow.c
new file mode 100644
index 000000000..c8243df7b
--- /dev/null
+++ b/keyboards/handwired/pilcrow/pilcrow.c
@@ -0,0 +1,28 @@
+#include "pilcrow.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/handwired/pilcrow/pilcrow.h b/keyboards/handwired/pilcrow/pilcrow.h
new file mode 100644
index 000000000..7138ccb3f
--- /dev/null
+++ b/keyboards/handwired/pilcrow/pilcrow.h
@@ -0,0 +1,23 @@
+#ifndef PILCROW_H
+#define PILCROW_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \
+}
+
+#endif
diff --git a/keyboards/handwired/pilcrow/readme.md b/keyboards/handwired/pilcrow/readme.md
new file mode 100644
index 000000000..7a7f6d2af
--- /dev/null
+++ b/keyboards/handwired/pilcrow/readme.md
@@ -0,0 +1,28 @@
+pilcrow keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk
new file mode 100644
index 000000000..55898147d
--- /dev/null
+++ b/keyboards/handwired/pilcrow/rules.mk
@@ -0,0 +1,67 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI controls
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h
index 473af67d3..23fbfd0b9 100644
--- a/keyboards/handwired/promethium/config.h
+++ b/keyboards/handwired/promethium/config.h
@@ -20,13 +20,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
+#define USB_VENDOR_ID_LENOVO 0x17ef
+#define USB_DEVICE_ID_LENOVO_TPKBD 0x6009
+#define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047
+#define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048
+#define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067
+
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6660
+#define VENDOR_ID USB_VENDOR_ID_LENOVO
+#define PRODUCT_ID USB_DEVICE_ID_LENOVO_CBTKBD
#define DEVICE_VER 0x0001
#define MANUFACTURER Priyadi
#define PRODUCT Promethium Keyboard
-#define DESCRIPTION Promethium Keyboard
+#define DESCRIPTION
/* key matrix size */
#define MATRIX_ROWS 8
diff --git a/keyboards/handwired/promethium/keymaps/priyadi/Makefile b/keyboards/handwired/promethium/keymaps/priyadi/Makefile
index 2f6f27a73..46fdfa011 100644
--- a/keyboards/handwired/promethium/keymaps/priyadi/Makefile
+++ b/keyboards/handwired/promethium/keymaps/priyadi/Makefile
@@ -4,16 +4,17 @@
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
+COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
+UNICODEMAP_ENABLE = yes
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
PS2_MOUSE_ENABLE = yes
diff --git a/keyboards/handwired/promethium/keymaps/priyadi/flash.sh b/keyboards/handwired/promethium/keymaps/priyadi/flash.sh
index fb81a54ee..14a3b4378 100755
--- a/keyboards/handwired/promethium/keymaps/priyadi/flash.sh
+++ b/keyboards/handwired/promethium/keymaps/priyadi/flash.sh
@@ -1,3 +1,4 @@
#!/bin/sh
+sleep 10
avrdude -p m32u4 -P /dev/ttyACM0 -c avr109 -U flash:w:../../../../../.build/handwired_promethium_priyadi.hex
diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
index b2da2f97b..7ae269563 100644
--- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
+++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c
@@ -11,6 +11,8 @@
#include "process_unicode.h"
#include "quantum.h"
#include "rgbsps.h"
+#include "ps2_mouse.h"
+#include "ps2.h"
#define COUNT(x) (sizeof (x) / sizeof (*(x)))
// #define RGBLED_NUM 5
@@ -282,25 +284,25 @@ void led_layer_func(void) {
rgbsps_set(LED_K, 15, 0, 15);
rgbsps_set(LED_L, 15, 0, 15);
- rgbsps_set(LED_U, 15, 0, 10);
- rgbsps_set(LED_O, 15, 0, 10);
- rgbsps_set(LED_COMM, 15, 0, 10);
- rgbsps_set(LED_DOT, 15, 0, 10);
- rgbsps_set(LED_SCLN, 15, 0, 10);
- rgbsps_set(LED_P, 15, 0, 10);
-
- rgbsps_set(LED_Q, 10, 0, 15);
- rgbsps_set(LED_W, 10, 0, 15);
- rgbsps_set(LED_E, 10, 0, 15);
- rgbsps_set(LED_R, 10, 0, 15);
- rgbsps_set(LED_A, 10, 0, 15);
- rgbsps_set(LED_S, 10, 0, 15);
- rgbsps_set(LED_D, 10, 0, 15);
- rgbsps_set(LED_F, 10, 0, 15);
- rgbsps_set(LED_Z, 10, 0, 15);
- rgbsps_set(LED_X, 10, 0, 15);
- rgbsps_set(LED_C, 10, 0, 15);
- rgbsps_set(LED_V, 10, 0, 15);
+ rgbsps_set(LED_U, 15, 0, 0);
+ rgbsps_set(LED_O, 15, 0, 0);
+ rgbsps_set(LED_COMM, 15, 0, 0);
+ rgbsps_set(LED_DOT, 15, 0, 0);
+ rgbsps_set(LED_SCLN, 15, 0, 0);
+ rgbsps_set(LED_P, 15, 0, 0);
+
+ rgbsps_set(LED_Q, 0, 15, 0);
+ rgbsps_set(LED_W, 0, 15, 0);
+ rgbsps_set(LED_E, 0, 15, 0);
+ rgbsps_set(LED_R, 0, 15, 0);
+ rgbsps_set(LED_A, 0, 15, 0);
+ rgbsps_set(LED_S, 0, 15, 0);
+ rgbsps_set(LED_D, 0, 15, 0);
+ rgbsps_set(LED_F, 0, 15, 0);
+ rgbsps_set(LED_Z, 0, 15, 0);
+ rgbsps_set(LED_X, 0, 15, 0);
+ rgbsps_set(LED_C, 0, 15, 0);
+ rgbsps_set(LED_V, 0, 15, 0);
rgbsps_send();
}
@@ -361,7 +363,15 @@ void led_layer_num(void) {
}
void led_layer_emoji(void) {
- rgbsps_setall(15, 15, 0);
+ for(uint8_t i = 0; i < COUNT(LED_ALNUM); i++) {
+ rgbsps_set(pgm_read_byte(&LED_ALNUM[i]), 15, 15, 0);
+ }
+ for(uint8_t i = 0; i < COUNT(LED_MODS); i++) {
+ rgbsps_set(pgm_read_byte(&LED_MODS[i]), 15, 15, 0);
+ }
+ for(uint8_t i = 0; i < COUNT(LED_FN); i++) {
+ rgbsps_set(pgm_read_byte(&LED_FN[i]), 15, 15, 0);
+ }
rgbsps_set(LED_IND_FUNC, 0, 0, 0);
rgbsps_set(LED_IND_NUM, 0, 0, 0);
@@ -415,7 +425,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_QWERTY] = KEYMAP(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
- KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT ,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT ,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL
),
@@ -432,10 +442,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------'
*/
[_COLEMAK] = KEYMAP(
- KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC,
- KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT ,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL
+ _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______,
+ _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______,
+ _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
/* Workman
@@ -450,10 +460,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------------------------------'
*/
[_WORKMAN] = KEYMAP(
- KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC,
- KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT ,
- KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL
+ _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______,
+ _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______,
+ _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
/* Punc
@@ -541,7 +551,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_GUI] = KEYMAP(
_______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______,
- LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY,
+ LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,KC_PAUS, QWERTY,
WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK,
OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN
),
@@ -572,6 +582,39 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#endif
switch (keycode) {
+ // QWERTZ style comma and dot: semicolon and colon when shifted
+ case KC_COMM:
+ if (record->event.pressed) {
+ bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT);
+ bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT);
+ if (lshifted || rshifted) {
+ if (lshifted) unregister_code(KC_LSFT);
+ if (rshifted) unregister_code(KC_RSFT);
+ register_code(KC_SCLN);
+ unregister_code(KC_SCLN);
+ if (lshifted) register_code(KC_LSFT);
+ if (rshifted) register_code(KC_RSFT);
+ } else {
+ register_code(KC_COMM);
+ unregister_code(KC_COMM);
+ }
+ }
+ return false;
+ break;
+ case KC_DOT:
+ if (record->event.pressed) {
+ if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) {
+ register_code(KC_SCLN);
+ unregister_code(KC_SCLN);
+ } else {
+ register_code(KC_DOT);
+ unregister_code(KC_DOT);
+ }
+ }
+ return false;
+ break;
+
+ // layout switchers
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
@@ -600,8 +643,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
break;
-
-
+ // layer switcher
case PUNC:
if (record->event.pressed) {
layer_on(_PUNC);
@@ -663,7 +705,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
break;
-
+ // OS switchers
case LINUX:
set_unicode_input_mode(UC_LNX);
#ifdef AUDIO_ENABLE
@@ -722,4 +764,40 @@ void shutdown_user()
stop_all_notes();
}
-#endif \ No newline at end of file
+#endif
+
+
+void ps2_mouse_init_user() {
+ uint8_t rcv;
+
+ // set TrackPoint sensitivity
+ PS2_MOUSE_SEND(0xE2, "set trackpoint sensitivity: 0xE2");
+ PS2_MOUSE_SEND(0x81, "set trackpoint sensitivity: 0x81");
+ PS2_MOUSE_SEND(0x4A, "set trackpoint sensitivity: 0x4A");
+ PS2_MOUSE_SEND(0x49, "set trackpoint sensitivity: 0x59");
+
+ // set TrackPoint Negative Inertia factor
+ PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2");
+ PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81");
+ PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D");
+ PS2_MOUSE_SEND(0x06, "set negative inertia factor: 0x06");
+
+ // set TrackPoint speed
+ // (transfer function upper plateau speed)
+ PS2_MOUSE_SEND(0xE2, "set trackpoint speed: 0xE2");
+ PS2_MOUSE_SEND(0x81, "set trackpoint speed: 0x81");
+ PS2_MOUSE_SEND(0x60, "set trackpoint speed: 0x60");
+ PS2_MOUSE_SEND(0x61, "set trackpoint speed: 0x61");
+
+ // inquire pts status
+ rcv = ps2_host_send(0xE2);
+ rcv = ps2_host_send(0x2C);
+ rcv = ps2_host_recv_response();
+ if ((rcv & 1) == 1) {
+ // if on, disable pts
+ rcv = ps2_host_send(0xE2);
+ rcv = ps2_host_send(0x47);
+ rcv = ps2_host_send(0x2C);
+ rcv = ps2_host_send(0x01);
+ }
+} \ No newline at end of file
diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h
index 8f2a8c3be..662eeab99 100644
--- a/keyboards/handwired/promethium/promethium.h
+++ b/keyboards/handwired/promethium/promethium.h
@@ -23,77 +23,77 @@
}
enum led_sequence {
- LED_IND_EMOJI,
- LED_IND_NUM,
- LED_IND_FUNC,
-
- LED_IND_BATTERY,
- LED_IND_USB,
LED_IND_BLUETOOTH,
+ LED_IND_USB,
+ LED_IND_BATTERY,
- LED_TAB,
- LED_ESC,
- LED_LSFT,
- LED_LCTL,
-
- LED_LGUI,
- LED_Z,
- LED_A,
- LED_Q,
+ LED_IND_FUNC,
+ LED_IND_NUM,
+ LED_IND_EMOJI,
- LED_W,
- LED_S,
- LED_X,
- LED_LALT,
+ LED_BKSP,
+ LED_ENT,
+ LED_RSFT,
+ LED_RCTL,
- LED_PUNC,
- LED_C,
- LED_D,
- LED_E,
+ LED_RGUI,
+ LED_SLSH,
+ LED_SCLN,
+ LED_P,
- LED_R,
- LED_F,
- LED_V,
- LED_NUM,
+ LED_O,
+ LED_L,
+ LED_DOT,
+ LED_RALT,
- LED_LSPC,
- LED_B,
- LED_G,
- LED_T,
+ LED_EMOJI,
+ LED_COMM,
+ LED_K,
+ LED_I,
- LED_TRACKPOINT1,
- LED_TRACKPOINT2,
- LED_TRACKPOINT3,
+ LED_U,
+ LED_J,
+ LED_M,
+ LED_FUNC,
LED_RSPC,
LED_N,
LED_HH,
LED_Y,
- LED_U,
- LED_J,
- LED_M,
- LED_FUNC,
+ LED_TRACKPOINT3,
+ LED_TRACKPOINT2,
+ LED_TRACKPOINT1,
- LED_EMOJI,
- LED_COMM,
- LED_K,
- LED_I,
+ LED_LSPC,
+ LED_B,
+ LED_G,
+ LED_T,
- LED_O,
- LED_L,
- LED_DOT,
- LED_RALT,
+ LED_R,
+ LED_F,
+ LED_V,
+ LED_NUM,
- LED_RGUI,
- LED_SLSH,
- LED_SCLN,
- LED_P,
+ LED_PUNC,
+ LED_C,
+ LED_D,
+ LED_E,
- LED_BKSP,
- LED_ENT,
- LED_RSFT,
- LED_RCTL
+ LED_W,
+ LED_S,
+ LED_X,
+ LED_LALT,
+
+ LED_LGUI,
+ LED_Z,
+ LED_A,
+ LED_Q,
+
+ LED_TAB,
+ LED_ESC,
+ LED_LSFT,
+ LED_LCTL,
};
#endif
diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk
index 0842780cc..465ef3359 100644
--- a/keyboards/handwired/promethium/rules.mk
+++ b/keyboards/handwired/promethium/rules.mk
@@ -1,4 +1,3 @@
-
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
@@ -61,11 +60,13 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE ?= no # Audio output on port C6
UNICODE_ENABLE ?= no # Unicode
-UNICODEMAP_ENABLE = yes
+UNICODEMAP_ENABLE ?= yes
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
PS2_MOUSE_ENABLE ?= yes
PS2_USE_INT ?= yes
+ADAFRUIT_BLE_ENABLE ?= yes
+API_SYSEX_ENABLE ?= no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend