aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/mt40
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mt40')
-rw-r--r--keyboards/mt40/i2c.c104
-rw-r--r--keyboards/mt40/i2c.h25
-rw-r--r--keyboards/mt40/mt40.c29
-rw-r--r--keyboards/mt40/rules.mk4
4 files changed, 3 insertions, 159 deletions
diff --git a/keyboards/mt40/i2c.c b/keyboards/mt40/i2c.c
deleted file mode 100644
index c27f3e3d1..000000000
--- a/keyboards/mt40/i2c.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
- uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
- if (bitrate_div >= 16) {
- bitrate_div = (bitrate_div - 16) / 2;
- }
- TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
- // set pull-up resistors on I2C bus pins
- PORTC |= 0b11;
-
- i2c_set_bitrate(400);
-
- // enable TWI (two-wire interface)
- TWCR |= (1 << TWEN);
-
- // enable TWI interrupt and slave address ACK
- TWCR |= (1 << TWIE);
- TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
- // reset TWI control register
- TWCR = 0;
-
- // begin transmission and wait for it to end
- TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the start condition was successfully transmitted
- if ((TWSR & 0xF8) != TW_START) {
- return 1;
- }
-
- // transmit address and wait
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- // check if the device has acknowledged the READ / WRITE mode
- uint8_t twst = TW_STATUS & 0xF8;
- if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
- return 1;
- }
-
- return 0;
-}
-
-void i2c_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
- TWDR = data;
-
- // transmit data and wait
- TWCR = (1<<TWINT) | (1<<TWEN);
- while (!(TWCR & (1<<TWINT)));
-
- if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
- return 1;
- }
-
- return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
- if (i2c_start(address)) {
- return 1;
- }
-
- for (uint16_t i = 0; i < length; i++) {
- if (i2c_write(data[i])) {
- return 1;
- }
- }
-
- i2c_stop();
-
- return 0;
-}
diff --git a/keyboards/mt40/i2c.h b/keyboards/mt40/i2c.h
deleted file mode 100644
index 27c9d3d05..000000000
--- a/keyboards/mt40/i2c.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif
diff --git a/keyboards/mt40/mt40.c b/keyboards/mt40/mt40.c
index 555689f87..dd079e7d8 100644
--- a/keyboards/mt40/mt40.c
+++ b/keyboards/mt40/mt40.c
@@ -13,32 +13,5 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "mt40.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-extern rgblight_config_t rgblight_config;
-void rgblight_set(void) {
- if (!rgblight_config.enable) {
- for (uint8_t i = 0; i < RGBLED_NUM; i++) {
- led[i].r = 0;
- led[i].g = 0;
- led[i].b = 0;
- }
- }
-
- i2c_init();
- i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- rgblight_task();
- matrix_init_user();
-}
+#include "mt40.h"
diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk
index 19410bc6e..0cbf90c67 100644
--- a/keyboards/mt40/rules.mk
+++ b/keyboards/mt40/rules.mk
@@ -24,14 +24,14 @@ AUDIO_ENABLE ?= no # Audio output on port C6
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight.
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
TAP_DANCE_ENABLE = no
OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c
LAYOUTS = planck_mit
LAYOUTS_HAS_RGB = no