diff options
Diffstat (limited to 'keyboards/orthodox')
| -rw-r--r-- | keyboards/orthodox/Makefile | 2 | ||||
| -rw-r--r-- | keyboards/orthodox/config.h | 11 | ||||
| -rw-r--r-- | keyboards/orthodox/keymaps/default/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/orthodox/keymaps/default/config.h (renamed from keyboards/orthodox/keymaps/serial/config.h) | 28 | ||||
| -rw-r--r-- | keyboards/orthodox/keymaps/default/keymap.c (renamed from keyboards/orthodox/keymaps/i2c/keymap.c) | 21 | ||||
| -rw-r--r-- | keyboards/orthodox/keymaps/i2c/config.h | 34 | ||||
| -rw-r--r-- | keyboards/orthodox/keymaps/serial/keymap.c | 132 | ||||
| -rw-r--r-- | keyboards/orthodox/orthodox.h | 6 | ||||
| -rw-r--r-- | keyboards/orthodox/pro_micro.h | 362 | ||||
| -rw-r--r-- | keyboards/orthodox/readme.md | 6 | ||||
| -rw-r--r-- | keyboards/orthodox/rev1/config.h | 10 | ||||
| -rw-r--r-- | keyboards/orthodox/rev1/rev1.c | 21 | ||||
| -rw-r--r-- | keyboards/orthodox/rev1/rev1.h | 21 | ||||
| -rw-r--r-- | keyboards/orthodox/rules.mk | 30 | ||||
| -rw-r--r-- | keyboards/orthodox/ssd1306.c | 470 | ||||
| -rw-r--r-- | keyboards/orthodox/ssd1306.h | 17 |
16 files changed, 113 insertions, 1061 deletions
diff --git a/keyboards/orthodox/Makefile b/keyboards/orthodox/Makefile index f5c87d4d6..0c519b323 100644 --- a/keyboards/orthodox/Makefile +++ b/keyboards/orthodox/Makefile @@ -1,4 +1,4 @@ -SUBPROJECT_DEFAULT = rev2 +SUBPROJECT_DEFAULT = rev1 ifndef MAKEFILE_INCLUDED include ../../Makefile diff --git a/keyboards/orthodox/config.h b/keyboards/orthodox/config.h index 008fb0978..b1a5b9cf9 100644 --- a/keyboards/orthodox/config.h +++ b/keyboards/orthodox/config.h @@ -1,5 +1,9 @@ /* +This is the c configuration file for the keyboard + Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2017 Jack Humbert +Copyright 2017 Art Ortenburger This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -23,10 +27,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef SUBPROJECT_rev1 #include "rev1/config.h" #endif -#ifdef SUBPROJECT_rev2 - #include "rev2/config.h" -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" -#endif + #endif diff --git a/keyboards/orthodox/keymaps/default/Makefile b/keyboards/orthodox/keymaps/default/Makefile new file mode 100644 index 000000000..457a3d01d --- /dev/null +++ b/keyboards/orthodox/keymaps/default/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/orthodox/keymaps/serial/config.h b/keyboards/orthodox/keymaps/default/config.h index 5169452ba..f24c6db29 100644 --- a/keyboards/orthodox/keymaps/serial/config.h +++ b/keyboards/orthodox/keymaps/default/config.h @@ -1,5 +1,9 @@ /* +This is the c configuration file for the keymap + Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert +Copyright 2017 Art Ortenburger This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,20 +19,20 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* Use I2C or Serial, not both */ #define USE_SERIAL +// #define USE_I2C -//#define MASTER_LEFT -//#define _MASTER_RIGHT -#define EE_HANDS +/* Select hand configuration */ +// #define MASTER_LEFT +// #define _MASTER_RIGHT +#define EE_HANDS -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" -#endif +#endif
\ No newline at end of file diff --git a/keyboards/orthodox/keymaps/i2c/keymap.c b/keyboards/orthodox/keymaps/default/keymap.c index ed24a3a1f..c837ae54d 100644 --- a/keyboards/orthodox/keymaps/i2c/keymap.c +++ b/keyboards/orthodox/keymaps/default/keymap.c @@ -1,3 +1,24 @@ +/* +This is the keymap for the keyboard + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert +Copyright 2017 Art Ortenburger + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include "orthodox.h" #include "action_layer.h" #include "eeconfig.h" diff --git a/keyboards/orthodox/keymaps/i2c/config.h b/keyboards/orthodox/keymaps/i2c/config.h deleted file mode 100644 index 542529719..000000000 --- a/keyboards/orthodox/keymaps/i2c/config.h +++ /dev/null @@ -1,34 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - - -#define USE_I2C - -//#define MASTER_LEFT -//#define _MASTER_RIGHT -#define EE_HANDS - - -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" -#endif diff --git a/keyboards/orthodox/keymaps/serial/keymap.c b/keyboards/orthodox/keymaps/serial/keymap.c deleted file mode 100644 index ed24a3a1f..000000000 --- a/keyboards/orthodox/keymaps/serial/keymap.c +++ /dev/null @@ -1,132 +0,0 @@ -#include "orthodox.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -#define LS__SPC MT(MOD_LSFT, KC_SPC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[_QWERTY] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LEFT, XXXXXXX, KC_DOWN, KC_UP, XXXXXXX, KC_RIGHT,KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, LOWER, KC_BSPC, KC_ENT, KC_RALT, LS__SPC, RAISE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI \ -), - -[_LOWER] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LCTL, XXXXXXX, _______, _______, XXXXXXX, KC_RCTL, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, KC_F12, KC_HOME, KC_COMM, KC_DOT, KC_END, _______ \ -), - -[_RAISE] = KEYMAP( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, XXXXXXX, _______, _______, XXXXXXX, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, KC_F12, KC_PGUP, KC_COMM, KC_DOT, KC_PGDN, _______ \ -), - -[_ADJUST] = KEYMAP( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, XXXXXXX, _______, _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -) - - -}; - -#ifdef AUDIO_ENABLE -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -#endif - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); - #endif - persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - } - return true; -} diff --git a/keyboards/orthodox/orthodox.h b/keyboards/orthodox/orthodox.h index bb7efb6ad..b33356e5e 100644 --- a/keyboards/orthodox/orthodox.h +++ b/keyboards/orthodox/orthodox.h @@ -4,12 +4,6 @@ #ifdef SUBPROJECT_rev1 #include "rev1.h" #endif -#ifdef SUBPROJECT_rev2 - #include "rev2.h" -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "rev2fliphalf.h" -#endif // Used to create a keymap using only KC_ prefixed keys #define KC_KEYMAP( \ diff --git a/keyboards/orthodox/pro_micro.h b/keyboards/orthodox/pro_micro.h deleted file mode 100644 index f9e7ed75d..000000000 --- a/keyboards/orthodox/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/orthodox/readme.md b/keyboards/orthodox/readme.md index 94bb8ebb9..57e940b0f 100644 --- a/keyboards/orthodox/readme.md +++ b/keyboards/orthodox/readme.md @@ -37,13 +37,13 @@ For further reading on build- and flashing-procedures for split ortholinear skel Download or clone the whole firmware and navigate to the keyboards/orthodox directory. Once your dev env is setup, you'll be able to generate the default .hex using: ``` -$ make rev1 +$ make rev1-default ``` You will see a lot of output and if everything worked correctly you will see the built hex files in your *root qmk_firmware directory* two levels up: ``` -orthodox_rev1_serial.hex +orthodox_rev1_default.hex ``` If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: @@ -97,7 +97,7 @@ the two halves, i.e. if your split keyboard has 3 rows in each half, then Flashing ------- From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. -Example: `make rev2-serial-avrdude` +Example: `make rev2-default-avrdude` Choosing which board to plug the USB cable into (choosing Master) diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h index 46bb99440..05f043b4c 100644 --- a/keyboards/orthodox/rev1/config.h +++ b/keyboards/orthodox/rev1/config.h @@ -1,5 +1,9 @@ /* +This is the c configuration file for the subproject + Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert +Copyright 2017 Art Ortenburger This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,10 +19,10 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H -#include "config_common.h" +#include "../config.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED diff --git a/keyboards/orthodox/rev1/rev1.c b/keyboards/orthodox/rev1/rev1.c index 10ece03f0..f404017b7 100644 --- a/keyboards/orthodox/rev1/rev1.c +++ b/keyboards/orthodox/rev1/rev1.c @@ -1,3 +1,24 @@ +/* +This is the source file for the subproject + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert +Copyright 2017 Art Ortenburger + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include "orthodox.h" #ifdef AUDIO_ENABLE diff --git a/keyboards/orthodox/rev1/rev1.h b/keyboards/orthodox/rev1/rev1.h index 4f163299d..06282b234 100644 --- a/keyboards/orthodox/rev1/rev1.h +++ b/keyboards/orthodox/rev1/rev1.h @@ -1,3 +1,24 @@ +/* +This is the header file for the subproject + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert +Copyright 2017 Art Ortenburger + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #ifndef REV1_H #define REV1_H diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index 0efa78550..dfcff1d90 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -55,22 +55,22 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 ?= yes -USE_I2C ?= yes +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 = yes +USE_I2C = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes diff --git a/keyboards/orthodox/ssd1306.c b/keyboards/orthodox/ssd1306.c deleted file mode 100644 index 5c6dff27f..000000000 --- a/keyboards/orthodox/ssd1306.c +++ /dev/null @@ -1,470 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "config.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#include "lets_split.h" -#include "common/glcdfont.c" -#ifdef ADAFRUIT_BLE_ENABLE -#include "adafruit_ble.h" -#endif -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "pincontrol.h" - -//assign the right code to your layers -#define _BASE 0 -#define _LOWER 8 -#define _RAISE 16 -#define _FNLAYER 64 -#define _NUMLAY 128 -#define _NLOWER 136 -#define _NFNLAYER 192 -#define _MOUSECURSOR 256 -#define _ADJUST 65560 - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -// Controls the SSD1306 128x32 OLED display via i2c - -#define i2cAddress 0x3C - -#define DisplayHeight 32 -#define DisplayWidth 128 - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -static struct CharacterMatrix display; -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(i2cAddress)) { - xprintf("failed to start write to %d\n", i2cAddress); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void matrix_clear(struct CharacterMatrix *matrix); - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(i2cAddress)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(void) { - bool success = false; - - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - -/// Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); -/* -// the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); -// end flip */ - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -static void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -static void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -static void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(i2cAddress)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -static void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -static void render_status_info(void) { -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - struct CharacterMatrix matrix; - - matrix_clear(&matrix); - matrix_write_P(&matrix, PSTR("USB: ")); -#ifdef PROTOCOL_LUFA - switch (USB_DeviceState) { - case DEVICE_STATE_Unattached: - matrix_write_P(&matrix, PSTR("Unattached")); - break; - case DEVICE_STATE_Suspended: - matrix_write_P(&matrix, PSTR("Suspended")); - break; - case DEVICE_STATE_Configured: - matrix_write_P(&matrix, PSTR("Connected")); - break; - case DEVICE_STATE_Powered: - matrix_write_P(&matrix, PSTR("Powered")); - break; - case DEVICE_STATE_Default: - matrix_write_P(&matrix, PSTR("Default")); - break; - case DEVICE_STATE_Addressed: - matrix_write_P(&matrix, PSTR("Addressed")); - break; - default: - matrix_write_P(&matrix, PSTR("Invalid")); - } -#endif - -// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(&matrix, PSTR("\n\nLayer: ")); - switch (layer_state) { - case _BASE: - matrix_write_P(&matrix, PSTR("Default")); - break; - case _RAISE: - matrix_write_P(&matrix, PSTR("Raise")); - break; - case _LOWER: - matrix_write_P(&matrix, PSTR("Lower")); - break; - case _ADJUST: - matrix_write_P(&matrix, PSTR("ADJUST")); - break; - default: - matrix_write(&matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(&matrix, led); - matrix_update(&display, &matrix); -} - -void iota_gfx_task(void) { - render_status_info(); - - if (display.dirty) { - iota_gfx_flush(); - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} -#endif diff --git a/keyboards/orthodox/ssd1306.h b/keyboards/orthodox/ssd1306.h deleted file mode 100644 index b0c74f987..000000000 --- a/keyboards/orthodox/ssd1306.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef SSD1306_H -#define SSD1306_H - -#include <stdbool.h> -#include <stdio.h> - -bool iota_gfx_init(void); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -#endif |