aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/preonic/rev3
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/preonic/rev3')
-rw-r--r--keyboards/preonic/rev3/config.h41
-rw-r--r--keyboards/preonic/rev3/matrix.c187
-rw-r--r--keyboards/preonic/rev3/rev3.c10
-rw-r--r--keyboards/preonic/rev3/rules.mk14
4 files changed, 34 insertions, 218 deletions
diff --git a/keyboards/preonic/rev3/config.h b/keyboards/preonic/rev3/config.h
index b2a53ee65..b5b2ced5a 100644
--- a/keyboards/preonic/rev3/config.h
+++ b/keyboards/preonic/rev3/config.h
@@ -27,26 +27,17 @@
#define MATRIX_ROWS 10
#define MATRIX_COLS 6
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-/* Note: These are not used for arm boards. They're here purely as documentation.
- * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 }
- * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
- * #define UNUSED_PINS
- */
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
+#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
+#define UNUSED_PINS
-#define NUMBER_OF_ENCODERS 1
#define ENCODERS_PAD_A { B12 }
#define ENCODERS_PAD_B { B13 }
+#define DIP_SWITCH_PINS { B14, A15, A0, B9 }
+
#define MUSIC_MAP
#undef AUDIO_VOICES
#undef C6_AUDIO
@@ -121,14 +112,18 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-#define WS2812_LED_N 2
-#define RGBLED_NUM WS2812_LED_N
-#define WS2812_TIM_N 2
-#define WS2812_TIM_CH 2
-#define PORT_WS2812 GPIOA
-#define PIN_WS2812 1
-#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812 GPIOA
+// #define PIN_WS2812 1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
//#define WS2812_EXTERNAL_PULLUP
+#define RGB_DI_PIN A1
+#define RGBLED_NUM 9
+#define RGBLIGHT_ANIMATIONS
+
#endif
diff --git a/keyboards/preonic/rev3/matrix.c b/keyboards/preonic/rev3/matrix.c
deleted file mode 100644
index db7a4f2a3..000000000
--- a/keyboards/preonic/rev3/matrix.c
+++ /dev/null
@@ -1,187 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include "hal.h"
-#include "timer.h"
-#include "wait.h"
-#include "printf.h"
-#include "backlight.h"
-#include "matrix.h"
-#include "action.h"
-#include "keycode.h"
-#include <string.h>
-
-/*
- * col: { B11, B10, B2, B1, A7, B0 }
- * row: { A10, A9, A8, B15, C13, C14, C15, A2 }
- */
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_col_t matrix_debouncing[MATRIX_COLS];
-static bool debouncing = false;
-static uint16_t debouncing_time = 0;
-
-static bool dip_switch[4] = {0, 0, 0, 0};
-
-__attribute__ ((weak))
-void matrix_init_user(void) {}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-void matrix_init(void) {
- printf("matrix init\n");
- //debug_matrix = true;
-
- // dip switch setup
- palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP);
- palSetPadMode(GPIOA, 15, PAL_MODE_INPUT_PULLUP);
- palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLUP);
- palSetPadMode(GPIOB, 9, PAL_MODE_INPUT_PULLUP);
-
- // actual matrix setup
- palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
-
- palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOB, 15, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 13, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN);
- palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN);
-
-
- memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
- memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_col_t));
-
-
- matrix_init_quantum();
-}
-
-__attribute__ ((weak))
-void dip_update(uint8_t index, bool active) { }
-
-__attribute__ ((weak))
-void encoder_update(bool clockwise) { }
-
-bool last_dip_switch[4] = {0};
-
-#ifndef ENCODER_RESOLUTION
- #define ENCODER_RESOLUTION 4
-#endif
-
-uint8_t matrix_scan(void) {
- // dip switch
- dip_switch[0] = !palReadPad(GPIOB, 14);
- dip_switch[1] = !palReadPad(GPIOA, 15);
- dip_switch[2] = !palReadPad(GPIOA, 10);
- dip_switch[3] = !palReadPad(GPIOB, 9);
- for (uint8_t i = 0; i < 4; i++) {
- if (last_dip_switch[i] ^ dip_switch[i])
- dip_update(i, dip_switch[i]);
- }
- memcpy(last_dip_switch, dip_switch, sizeof(&dip_switch));
-
- // actual matrix
- for (int col = 0; col < MATRIX_COLS; col++) {
- matrix_col_t data = 0;
-
- // strobe col { B11, B10, B2, B1, A7, B0 }
- switch (col) {
- case 0: palSetPad(GPIOB, 11); break;
- case 1: palSetPad(GPIOB, 10); break;
- case 2: palSetPad(GPIOB, 2); break;
- case 3: palSetPad(GPIOB, 1); break;
- case 4: palSetPad(GPIOA, 7); break;
- case 5: palSetPad(GPIOB, 0); break;
- }
-
- // need wait to settle pin state
- wait_us(20);
-
- // read row data { A10, A9, A8, B15, C13, C14, C15, A2 }
- data = (
- (palReadPad(GPIOA, 10) << 0 ) |
- (palReadPad(GPIOA, 9) << 1 ) |
- (palReadPad(GPIOA, 8) << 2 ) |
- (palReadPad(GPIOB, 15) << 3 ) |
- (palReadPad(GPIOC, 13) << 4 ) |
- (palReadPad(GPIOC, 14) << 5 ) |
- (palReadPad(GPIOC, 15) << 6 ) |
- (palReadPad(GPIOA, 2) << 7 ) |
- (palReadPad(GPIOA, 3) << 8 ) |
- (palReadPad(GPIOA, 6) << 9 )
- );
-
- // unstrobe col { B11, B10, B2, B1, A7, B0 }
- switch (col) {
- case 0: palClearPad(GPIOB, 11); break;
- case 1: palClearPad(GPIOB, 10); break;
- case 2: palClearPad(GPIOB, 2); break;
- case 3: palClearPad(GPIOB, 1); break;
- case 4: palClearPad(GPIOA, 7); break;
- case 5: palClearPad(GPIOB, 0); break;
- }
-
- if (matrix_debouncing[col] != data) {
- matrix_debouncing[col] = data;
- debouncing = true;
- debouncing_time = timer_read();
- }
- }
-
- if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- matrix[row] = 0;
- for (int col = 0; col < MATRIX_COLS; col++) {
- matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
- }
- }
- debouncing = false;
- }
-
- matrix_scan_quantum();
-
- return 1;
-}
-
-bool matrix_is_on(uint8_t row, uint8_t col) {
- return (matrix[row] & (1<<col));
-}
-
-matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
- printf("\nr/c 01234567\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- printf("%X0: ", row);
- matrix_row_t data = matrix_get_row(row);
- for (int col = 0; col < MATRIX_COLS; col++) {
- if (data & (1<<col))
- printf("1");
- else
- printf("0");
- }
- printf("\n");
- }
-}
diff --git a/keyboards/preonic/rev3/rev3.c b/keyboards/preonic/rev3/rev3.c
index b61beec5d..dc4ff66fc 100644
--- a/keyboards/preonic/rev3/rev3.c
+++ b/keyboards/preonic/rev3/rev3.c
@@ -22,3 +22,13 @@ void matrix_init_kb(void) {
void matrix_scan_kb(void) {
matrix_scan_user();
}
+
+#ifdef DIP_SWITCH_ENABLE
+ __attribute__((weak))
+void dip_update(uint8_t index, bool active) {}
+
+ __attribute__((weak))
+void dip_switch_update_user(uint8_t index, bool active) {
+ dip_update(index, active);
+}
+#endif
diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk
index 39e69872c..ad8a82967 100644
--- a/keyboards/preonic/rev3/rules.mk
+++ b/keyboards/preonic/rev3/rules.mk
@@ -1,11 +1,8 @@
-# project specific files
-SRC = matrix.c
-
-# Cortex version
-MCU = STM32F303
+# MCU name
+MCU = STM32F303
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
+# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
@@ -20,15 +17,16 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
+WS2812_DRIVER = bitbang
API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
#SLEEP_LED_ENABLE = yes
-CUSTOM_MATRIX = yes # Custom matrix file
# SERIAL_LINK_ENABLE = yes
ENCODER_ENABLE = yes
+DIP_SWITCH_ENABLE = yes
LAYOUTS = ortho_5x12
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:23:41 +0000