aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/tada68
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/tada68')
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/Makefile0
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/config.h13
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/keymaps/default/Makefile0
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/keymaps/default/keymap.c4
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/keymaps/default/readme.md0
-rwxr-xr-xkeyboards/tada68/keymaps/rgb/Makefile21
-rwxr-xr-xkeyboards/tada68/keymaps/rgb/config.h9
-rwxr-xr-xkeyboards/tada68/keymaps/rgb/keymap.c52
-rwxr-xr-xkeyboards/tada68/keymaps/rgb/readme.md3
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/readme.md0
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/rules.mk24
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/tada68.c0
-rwxr-xr-x[-rw-r--r--]keyboards/tada68/tada68.h0
13 files changed, 99 insertions, 27 deletions
diff --git a/keyboards/tada68/Makefile b/keyboards/tada68/Makefile
index 4e2a6f00f..4e2a6f00f 100644..100755
--- a/keyboards/tada68/Makefile
+++ b/keyboards/tada68/Makefile
diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h
index 19cf9c9b3..3e011bc75 100644..100755
--- a/keyboards/tada68/config.h
+++ b/keyboards/tada68/config.h
@@ -63,19 +63,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define BACKLIGHT_LEVELS 4
-/* Underlight configuration
- */
-
-/*#define RGB_DI_PIN E2
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 2 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17*/
-//Disabled while I figure out a suitable pin for RGB support.
-//I've tried F5, D2, D3, and E2 but it's possible the end of my
-//strand is bad. New LEDs on order.
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/tada68/keymaps/default/Makefile b/keyboards/tada68/keymaps/default/Makefile
index 2a7ff2779..2a7ff2779 100644..100755
--- a/keyboards/tada68/keymaps/default/Makefile
+++ b/keyboards/tada68/keymaps/default/Makefile
diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c
index f28116e0a..8e7cbdaf2 100644..100755
--- a/keyboards/tada68/keymaps/default/keymap.c
+++ b/keyboards/tada68/keymaps/default/keymap.c
@@ -38,14 +38,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |----------------------------------------------------------------|
* | |<- |Dn | ->| | | | | | | | | |End |
* |----------------------------------------------------------------|
- * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| |MouseL|MsU|Rck |
+ * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR |
* |----------------------------------------------------------------|
* | | | | | | | |MsL|MsD|MsR |
* `----------------------------------------------------------------'
*/
[_FL] = KEYMAP_ANSI(
_______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS , \
- _______,_______,KC_UP, _______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,KC_HOME, \
+ _______,_______, KC_UP,_______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
_______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______, _______,KC_END, \
_______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
_______,_______,_______, _______, _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
diff --git a/keyboards/tada68/keymaps/default/readme.md b/keyboards/tada68/keymaps/default/readme.md
index 53412d7c2..53412d7c2 100644..100755
--- a/keyboards/tada68/keymaps/default/readme.md
+++ b/keyboards/tada68/keymaps/default/readme.md
diff --git a/keyboards/tada68/keymaps/rgb/Makefile b/keyboards/tada68/keymaps/rgb/Makefile
new file mode 100755
index 000000000..ee94a67b4
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/tada68/keymaps/rgb/config.h b/keyboards/tada68/keymaps/rgb/config.h
new file mode 100755
index 000000000..5dcdad12e
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/config.h
@@ -0,0 +1,9 @@
+#include "../../config.h"
+
+/* WS2812B RGB Underglow LED */
+#define RGB_DI_PIN F5 // See readme.md for wiring your led's
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case.
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8 \ No newline at end of file
diff --git a/keyboards/tada68/keymaps/rgb/keymap.c b/keyboards/tada68/keymaps/rgb/keymap.c
new file mode 100755
index 000000000..4634e5e3a
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/keymap.c
@@ -0,0 +1,52 @@
+#include "tada68.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: (Base Layer) Default Layer
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` |
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del |
+ * |----------------------------------------------------------------|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp|
+ * |----------------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn|
+ * |----------------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig |
+ * `----------------------------------------------------------------'
+ */
+[_BL] = KEYMAP_ANSI(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,KC_GRV, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS,KC_DEL, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,KC_PGUP, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,KC_UP,KC_PGDN, \
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ * ,----------------------------------------------------------------.
+ * | | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins |
+ * |----------------------------------------------------------------|
+ * | | |Up | | |RGB|MOD|HU-|HU+|SA-|SA+|VA-|VA+| |Hme |
+ * |----------------------------------------------------------------|
+ * | |<- |Dn | ->| | | | | | | | | |End |
+ * |----------------------------------------------------------------|
+ * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR |
+ * |----------------------------------------------------------------|
+ * | | | | | | | |MsL|MsD|MsR |
+ * `----------------------------------------------------------------'
+ */
+[_FL] = KEYMAP_ANSI(
+ _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS , \
+ _______,_______,KC_UP,_______,_______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \
+ _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______, _______,KC_END, \
+ _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
+ _______,_______,_______, _______, _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
+};
diff --git a/keyboards/tada68/keymaps/rgb/readme.md b/keyboards/tada68/keymaps/rgb/readme.md
new file mode 100755
index 000000000..fb5a5abd0
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/readme.md
@@ -0,0 +1,3 @@
+# RGB on the TADA68
+This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this momen because not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB:
+![Image of solder points for RGB on the Tada68](http://i.imgur.com/5Xmiz6Q.jpg) \ No newline at end of file
diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
index dbe2fdca1..dbe2fdca1 100644..100755
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk
index d8ec42365..dd5b2bbe0 100644..100755
--- a/keyboards/tada68/rules.mk
+++ b/keyboards/tada68/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no # MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no # Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/tada68/tada68.c b/keyboards/tada68/tada68.c
index 24f89048c..24f89048c 100644..100755
--- a/keyboards/tada68/tada68.c
+++ b/keyboards/tada68/tada68.c
diff --git a/keyboards/tada68/tada68.h b/keyboards/tada68/tada68.h
index d0e027a6f..d0e027a6f 100644..100755
--- a/keyboards/tada68/tada68.h
+++ b/keyboards/tada68/tada68.h