diff options
Diffstat (limited to 'keyboards/uzu42/keymaps/default/keymap.c')
-rw-r--r-- | keyboards/uzu42/keymaps/default/keymap.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/keyboards/uzu42/keymaps/default/keymap.c b/keyboards/uzu42/keymaps/default/keymap.c new file mode 100644 index 000000000..bb439971d --- /dev/null +++ b/keyboards/uzu42/keymaps/default/keymap.c @@ -0,0 +1,292 @@ +#include QMK_KEYBOARD_H +#include "uzu42.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +#include <stdio.h> +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + RGBRST +}; + +#define KC_CTES CTL_T(KC_ESC) +#define KC_SFSP SFT_T(KC_SPC) +#define KC_ALBS ALT_T(KC_BSPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT( \ + //,---------------------------------------. ,---------------------------------------. + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH,\ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_LSFT, KC_SPC,KC_LALT,KC_LGUI, LOWER,KC_CTES, KC_SFSP, RAISE,KC_ALBS,KC_RCTL,KC_LGUI,XXXXXXX \ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + ), + + [_LOWER] = LAYOUT( \ + //,---------------------------------------. ,---------------------------------------. + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_TAB,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_LEFT,KC_DOWN, KC_UP,KC_RGHT, KC_ENT,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_LCTL, KC_SPC,KC_LSFT,KC_LALT, KC_DEL, KC_BSPC,KC_HOME, KC_END,XXXXXXX,XXXXXXX,\ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______ \ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + ), + + [_RAISE] = LAYOUT( \ + //,---------------------------------------. ,---------------------------------------. + KC_EXLM, KC_AT,KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_TAB,KC_UNDS,KC_PLUS,KC_PIPE,KC_TILD, KC_COLN,KC_DQUO, KC_GT,KC_LCBR,KC_RCBR,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_LCTL,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_SCLN,KC_QUOT, KC_LT,KC_LBRC,KC_RBRC,\ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______ \ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + ), + + [_ADJUST] = LAYOUT( \ + //,---------------------------------------. ,---------------------------------------. + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + KC_F11, KC_F12, RESET,KC_PSCR, KC_INS, RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,XXXXXXX,\ + //|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGBRST,\ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______ \ + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + ) +}; + +int RGB_current_mode; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif +} + +//SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk +#ifdef OLED_DRIVER_ENABLE + +#define L_BASE 0 +#define L_LOWER (1 << 1) +#define L_RAISE (1 << 2) +#define L_ADJUST (1 << 3) +#define L_ADJUST_TRI (L_ADJUST | L_RAISE | L_LOWER) + +char layer_state_str[24]; + +const char *read_layer_state(void) { + switch (layer_state) + { + case L_BASE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default"); + break; + case L_RAISE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise"); + break; + case L_LOWER: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower"); + break; + case L_ADJUST: + case L_ADJUST_TRI: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust"); + break; + default: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state); + } + + return layer_state_str; +} + +const char *read_logo(void) { + static char logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + return logo; +} + +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +const char *read_keylog(void) { + return keylog_str; +} + +const char *read_keylogs(void) { + return keylogs_str; +} + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_keyboard_master()) + return OLED_ROTATION_180; // flips the display 180 degrees if offhand + return rotation; +} + +void oled_task_user(void) { + if (is_keyboard_master()) { + // If you want to change the display of OLED, you need to change here + oled_write_ln(read_layer_state(), false); + oled_write_ln(read_keylog(), false); + oled_write_ln(read_keylogs(), false); + //oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false); + //oled_write_ln(read_host_led_state(), false); + //oled_write_ln(read_timelog(), false); + } else { + oled_write(read_logo(), false); + } +} +#endif // OLED_DRIVER_ENABLE + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef OLED_DRIVER_ENABLE + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + +#ifdef RGBLIGHT_ENABLE + +char rbf_info_str[24]; +const char *read_rgb_info(void) { + + snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d", + rgblight_config.enable ? "on" : "- ", rgblight_config.mode, + rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + return rbf_info_str; +} +#endif |