diff options
Diffstat (limited to 'keyboards')
-rw-r--r-- | keyboards/rama/m6_a/config.h | 190 | ||||
-rw-r--r-- | keyboards/rama/m6_a/keymaps/default/config.h | 24 | ||||
-rw-r--r-- | keyboards/rama/m6_a/keymaps/default/keymap.c | 298 | ||||
-rw-r--r-- | keyboards/rama/m6_a/keymaps/default/readme.md | 12 | ||||
-rw-r--r-- | keyboards/rama/m6_a/keymaps/knops/config.h | 24 | ||||
-rw-r--r-- | keyboards/rama/m6_a/keymaps/knops/keymap.c | 120 | ||||
-rw-r--r-- | keyboards/rama/m6_a/keymaps/knops/readme.md | 11 | ||||
-rw-r--r-- | keyboards/rama/m6_a/m6_a.c | 44 | ||||
-rw-r--r-- | keyboards/rama/m6_a/m6_a.h | 29 | ||||
-rw-r--r-- | keyboards/rama/m6_a/readme.md | 15 | ||||
-rw-r--r-- | keyboards/rama/m6_a/rules.mk | 68 | ||||
-rw-r--r-- | keyboards/rama/readme.md | 9 |
12 files changed, 844 insertions, 0 deletions
diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h new file mode 100644 index 000000000..0c5355f4a --- /dev/null +++ b/keyboards/rama/m6_a/config.h @@ -0,0 +1,190 @@ +/* +Copyright 2018 Wilba + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5241 // "RW" +#define PRODUCT_ID 0x006A // 6-A +#define DEVICE_VER 0x0001 +#define MANUFACTURER RAMA.WORKS +#define PRODUCT RAMA M6-A +#define DESCRIPTION RAMA M6-A Macropad + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6 } +#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#endif diff --git a/keyboards/rama/m6_a/keymaps/default/config.h b/keyboards/rama/m6_a/keymaps/default/config.h new file mode 100644 index 000000000..d150575c1 --- /dev/null +++ b/keyboards/rama/m6_a/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Wilba + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/rama/m6_a/keymaps/default/keymap.c b/keyboards/rama/m6_a/keymaps/default/keymap.c new file mode 100644 index 000000000..1323ba6f2 --- /dev/null +++ b/keyboards/rama/m6_a/keymaps/default/keymap.c @@ -0,0 +1,298 @@ +#include "../../m6_a.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + KEYMAP( + TO(1), KC_A, KC_B, KC_C, KC_D, KC_E), + + KEYMAP( + TO(2), KC_F, KC_G, KC_H, KC_I, KC_J), + + KEYMAP( + TO(3), KC_K, KC_L, KC_M, KC_N, KC_O), + + KEYMAP( + TO(4), KC_P, KC_Q, KC_R, KC_S, KC_T), + + KEYMAP( + TO(5), KC_U, KC_V, KC_W, KC_X, KC_Y), + + KEYMAP( + TO(0), KC_Z, KC_1, KC_2, KC_3, KC_4) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + //keyevent_t event = record->event; + + switch (id) { + case 0: + if (record->event.pressed) { + return MACRO( T(T), T(G), T(L), T(H), T(F), T(ENT), END ); + } + break; + case 1: + if (record->event.pressed) { + return MACRO( T(T), T(G), T(G), T(ENT), END ); + } + break; + case 2: + if (record->event.pressed) { + return MACRO( D(NO), T(L), U(NO), END ); + } + break; + case 3: + if (record->event.pressed) { + return MACRO( D(LCTL), T(Z), U(LCTL), END ); + } + break; + case 4: + if (record->event.pressed) { + return MACRO( D(LCTL), D(LSFT), T(Z), U(LSFT), U(LCTL), END ); + } + break; + case 5: + if (record->event.pressed) { + return MACRO( D(LCTL), T(X), U(LCTL), END ); + } + break; + case 6: + if (record->event.pressed) { + return MACRO( D(LCTL), T(C), U(LCTL), END ); + } + break; + case 7: + if (record->event.pressed) { + return MACRO( D(LCTL), T(V), U(LCTL), END ); + } + break; + } + return MACRO_NONE; +} + +// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7 +// This is 1-based because I copied it from Knops code. +void set_switch_led(int ledId, bool state) { + if(state) { + switch(ledId) { + case 1: + PORTD |= (1<<6); + break; + case 2: + PORTB |= (1<<6); + break; + case 3: + PORTF |= (1<<5); + break; + case 4: + PORTB |= (1<<4); + break; + case 5: + PORTC |= (1<<7); + break; + case 6: + PORTF |= (1<<7); + break; + } + } else { + switch(ledId) { + case 1: + PORTD &= ~(1<<6); + break; + case 2: + PORTB &= ~(1<<6); + break; + case 3: + PORTF &= ~(1<<5); + break; + case 4: + PORTB &= ~(1<<4); + break; + case 5: + PORTC &= ~(1<<7); + break; + case 6: + PORTF &= ~(1<<7); + break; + } + } +} + + +void set_layer_led(int layerId) { + // UNUSED +} + +void led_set_layer(int layer); + +void matrix_init_user(void) { + led_init_ports(); + led_set_layer(0); +} + +void matrix_scan_user(void) { +} + +// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7 +void led_init_ports() { + // Switch #1 + DDRD |= (1<<6); + PORTD &= ~(1<<6); + + // Switch #2 + DDRB |= (1<<6); + PORTB &= ~(1<<6); + + // Switch #3 + DDRF |= (1<<5); + PORTF &= ~(1<<5); + + // Switch #4 + DDRB |= (1<<4); + PORTB &= ~(1<<4); + + // Switch #5 + DDRC |= (1<<7); + PORTC &= ~(1<<7); + + // Switch #6 + DDRF |= (1<<7); + PORTF &= ~(1<<7); +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} + +void led_set_layer(int layer) { + switch(layer) { + case 0: + set_switch_led(1, true); + set_switch_led(2, false); + set_switch_led(3, false); + set_switch_led(4, false); + set_switch_led(5, false); + set_switch_led(6, false); + break; + case 1: + set_switch_led(1, false); + set_switch_led(2, true); + set_switch_led(3, false); + set_switch_led(4, false); + set_switch_led(5, false); + set_switch_led(6, false); + break; + case 2: + set_switch_led(1, false); + set_switch_led(2, false); + set_switch_led(3, true); + set_switch_led(4, false); + set_switch_led(5, false); + set_switch_led(6, false); + break; + case 3: + set_switch_led(1, false); + set_switch_led(2, false); + set_switch_led(3, false); + set_switch_led(4, true); + set_switch_led(5, false); + set_switch_led(6, false); + break; + case 4: + set_switch_led(1, false); + set_switch_led(2, false); + set_switch_led(3, false); + set_switch_led(4, false); + set_switch_led(5, true); + set_switch_led(6, false); + break; + case 5: + set_switch_led(1, false); + set_switch_led(2, false); + set_switch_led(3, false); + set_switch_led(4, false); + set_switch_led(5, false); + set_switch_led(6, true); + break; + default: + set_switch_led(1, true); + set_switch_led(2, true); + set_switch_led(3, true); + set_switch_led(4, true); + set_switch_led(5, true); + set_switch_led(6, true); + break; + } +} + +bool process_record_user (uint16_t keycode, keyrecord_t *record) { + switch ( keycode ) + { + case TO( 0 ): + if ( record->event.pressed ) + { + led_set_layer( 0 ); + } + break; + case TO( 1 ): + if ( record->event.pressed ) + { + led_set_layer( 1 ); + } + break; + case TO( 2 ): + if ( record->event.pressed ) + { + led_set_layer( 2 ); + } + break; + case TO( 3 ): + if ( record->event.pressed ) + { + led_set_layer( 3 ); + } + break; + case TO( 4 ): + if ( record->event.pressed ) + { + led_set_layer( 4 ); + } + break; + case TO( 5 ): + if ( record->event.pressed ) + { + led_set_layer( 5 ); + } + break; + } + return true; +} diff --git a/keyboards/rama/m6_a/keymaps/default/readme.md b/keyboards/rama/m6_a/keymaps/default/readme.md new file mode 100644 index 000000000..cfb90f650 --- /dev/null +++ b/keyboards/rama/m6_a/keymaps/default/readme.md @@ -0,0 +1,12 @@ +![RAMA M6-A Layout Image](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/5ab7287f6d2a738f9a719568/5ab7288c1ae6cfa0dae88a59/1521952909569/m6-layout.jpg) + +# Default RAMA M6-A Layout + +This is an example layout to demonstrate layer toggling. + +The top left key will cycle through six layers. + +If LEDs are installed, one of the six LEDs will be on to indicate current layer. + +LEDs should be installed cathode pin on the square pad. + diff --git a/keyboards/rama/m6_a/keymaps/knops/config.h b/keyboards/rama/m6_a/keymaps/knops/config.h new file mode 100644 index 000000000..999d8876c --- /dev/null +++ b/keyboards/rama/m6_a/keymaps/knops/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 Pawnerd + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/rama/m6_a/keymaps/knops/keymap.c b/keyboards/rama/m6_a/keymaps/knops/keymap.c new file mode 100644 index 000000000..912147f4b --- /dev/null +++ b/keyboards/rama/m6_a/keymaps/knops/keymap.c @@ -0,0 +1,120 @@ +#include "../../m6_a.h" + +/*KNOPS_MISC*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /*KNOPS_KEYMAP*/ + +}; + +void set_led_state(int ledId, bool state) { + if(state) { + switch(ledId) { + case 0: + PORTD |= (1<<6); + break; + case 1: + PORTB |= (1<<6); + break; + case 2: + PORTF |= (1<<5); + break; + case 3: + PORTB |= (1<<4); + break; + case 4: + PORTC |= (1<<7); + break; + case 5: + PORTF |= (1<<7); + break; + } + } else { + switch(ledId) { + case 0: + PORTD &= ~(1<<6); + break; + case 1: + PORTB &= ~(1<<6); + break; + case 2: + PORTF &= ~(1<<5); + break; + case 3: + PORTB &= ~(1<<4); + break; + case 4: + PORTC &= ~(1<<7); + break; + case 5: + PORTF &= ~(1<<7); + break; + } + } +} + +void led_init_ports() { + // Switch #1 + DDRD |= (1<<6); + PORTD &= ~(1<<6); + + // Switch #2 + DDRB |= (1<<6); + PORTB &= ~(1<<6); + + // Switch #3 + DDRF |= (1<<5); + PORTF &= ~(1<<5); + + // Switch #4 + DDRB |= (1<<4); + PORTB &= ~(1<<4); + + // Switch #5 + DDRC |= (1<<7); + PORTC &= ~(1<<7); + + // Switch #6 + DDRF |= (1<<7); + PORTF &= ~(1<<7); +} + +void led_set_layer(int layer) { + + /*KNOPS_SIMPLELED_STATES*/ + +} + +void matrix_init_user(void) { + led_init_ports(); + + led_set_layer(0); + + /*KNOPS_INIT*/ +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + //keyevent_t event = record->event; + + /*KNOPS_MACRO*/ + return NULL; +} + +void matrix_scan_user(void) { + /*KNOPS_SCAN*/ +} + +void led_set_user(uint8_t usb_led) { + + /*KNOPS_FUNCTIONALLED_STATES*/ + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + /*KNOPS_PROCESS_STATE*/ + return NULL; +} + + diff --git a/keyboards/rama/m6_a/keymaps/knops/readme.md b/keyboards/rama/m6_a/keymaps/knops/readme.md new file mode 100644 index 000000000..58696974e --- /dev/null +++ b/keyboards/rama/m6_a/keymaps/knops/readme.md @@ -0,0 +1,11 @@ +# Default Knops Mini Layout + +![Knops logo](http://knops.io/img/Knops_logo.jpg) + +![Knops Mini Layout Image](https://i.imgur.com/WQBQctm.png) + +This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot: + +![Knops Mini Layout Image](https://i.imgur.com/afH1NOt.png) + +As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file diff --git a/keyboards/rama/m6_a/m6_a.c b/keyboards/rama/m6_a/m6_a.c new file mode 100644 index 000000000..1c84ea2b8 --- /dev/null +++ b/keyboards/rama/m6_a/m6_a.c @@ -0,0 +1,44 @@ +/* Copyright 2018 Wilba + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "m6_a.h" +/* +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} +*/ diff --git a/keyboards/rama/m6_a/m6_a.h b/keyboards/rama/m6_a/m6_a.h new file mode 100644 index 000000000..6809c2cc9 --- /dev/null +++ b/keyboards/rama/m6_a/m6_a.h @@ -0,0 +1,29 @@ +/* Copyright 2018 Wilba + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "quantum.h" + +#ifndef RAMA_M6_A_H +#define RAMA_M6_A_H + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05 \ +) { \ + { K00, K01, K02, K03, K04, K05 }, \ +} +#endif // RAMA_M6_A diff --git a/keyboards/rama/m6_a/readme.md b/keyboards/rama/m6_a/readme.md new file mode 100644 index 000000000..5dd2b92e1 --- /dev/null +++ b/keyboards/rama/m6_a/readme.md @@ -0,0 +1,15 @@ +# RAMA M6-A + +![RAMA M6-A](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/59fc7b1053450adf5bf9a852/1515932239307/RAMA-RAMA-M6-DSA-XO-CAPS.73-3_1.jpg?format=1500w) + +A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a) + +Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) +Hardware Supported: RAMA M6-A PCB +Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) + +Make example for this keyboard (after setting up your build environment): + + make rama/m6_a:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/rama/m6_a/rules.mk b/keyboards/rama/m6_a/rules.mk new file mode 100644 index 000000000..ca2a2a5f8 --- /dev/null +++ b/keyboards/rama/m6_a/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches diff --git a/keyboards/rama/readme.md b/keyboards/rama/readme.md new file mode 100644 index 000000000..4625eb1ef --- /dev/null +++ b/keyboards/rama/readme.md @@ -0,0 +1,9 @@ +# RAMA + +Firmware for keyboards designed by [RAMA WORKS](https://rama.works) + +[RAMA M6-A](https://rama.works/m6a) + +[RAMA M60-A](https://rama.works/#/m60-a/) + +[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open) |