diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/ergodox_infinity/ergodox_infinity.c | 85 |
1 files changed, 57 insertions, 28 deletions
diff --git a/keyboards/ergodox_infinity/ergodox_infinity.c b/keyboards/ergodox_infinity/ergodox_infinity.c index 9fda7991f..c69c1eb36 100644 --- a/keyboards/ergodox_infinity/ergodox_infinity.c +++ b/keyboards/ergodox_infinity/ergodox_infinity.c @@ -6,6 +6,17 @@ #include "lcd_backlight.h" #endif +#ifdef WPM_ENABLE +# include "serial_link/protocol/transport.h" +# include "wpm.h" + +MASTER_TO_ALL_SLAVES_OBJECT(current_wpm, uint8_t); +static remote_object_t* remote_objects[] = { + REMOTE_OBJECT(current_wpm), +}; +static uint8_t last_sent_wpm = 0; +#endif + void init_serial_link_hal(void) { PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2); @@ -39,30 +50,30 @@ void init_serial_link_hal(void) { // Which will reduce the brightness range #define PRESCALAR_DEFINE 0 void lcd_backlight_hal_init(void) { - // Setup Backlight + // Setup Backlight SIM->SCGC6 |= SIM_SCGC6_FTM0; FTM0->CNT = 0; // Reset counter - // PWM Period - // 16-bit maximum - FTM0->MOD = 0xFFFF; + // PWM Period + // 16-bit maximum + FTM0->MOD = 0xFFFF; - // Set FTM to PWM output - Edge Aligned, Low-true pulses + // Set FTM to PWM output - Edge Aligned, Low-true pulses #define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) - CHANNEL_RED.CnSC = CNSC_MODE; - CHANNEL_GREEN.CnSC = CNSC_MODE; - CHANNEL_BLUE.CnSC = CNSC_MODE; + CHANNEL_RED.CnSC = CNSC_MODE; + CHANNEL_GREEN.CnSC = CNSC_MODE; + CHANNEL_BLUE.CnSC = CNSC_MODE; - // System clock, /w prescalar setting - FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); + // System clock, /w prescalar setting + FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); - CHANNEL_RED.CnV = 0; - CHANNEL_GREEN.CnV = 0; - CHANNEL_BLUE.CnV = 0; + CHANNEL_RED.CnV = 0; + CHANNEL_GREEN.CnV = 0; + CHANNEL_BLUE.CnV = 0; - RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); - RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); - RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); + RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); + RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); + RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); #define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) RGB_PORT->PCR[RED_PIN] = RGB_MODE; @@ -94,9 +105,9 @@ static uint16_t cie_lightness(uint16_t v) { } void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { - CHANNEL_RED.CnV = cie_lightness(r); - CHANNEL_GREEN.CnV = cie_lightness(g); - CHANNEL_BLUE.CnV = cie_lightness(b); + CHANNEL_RED.CnV = cie_lightness(r); + CHANNEL_GREEN.CnV = cie_lightness(g); + CHANNEL_BLUE.CnV = cie_lightness(b); } __attribute__ ((weak)) @@ -109,21 +120,39 @@ void matrix_scan_user(void) { void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up + // put your keyboard start-up code here + // runs once when the firmware starts up - matrix_init_user(); - // The backlight always has to be initialized, otherwise it will stay lit + matrix_init_user(); + // The backlight always has to be initialized, otherwise it will stay lit #ifndef VISUALIZER_ENABLE - lcd_backlight_hal_init(); + lcd_backlight_hal_init(); +#endif +#ifdef WPM_ENABLE + add_remote_objects(remote_objects, sizeof(remote_objects) / sizeof(remote_object_t*)); #endif } void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); + // put your looping keyboard code here + // runs every cycle (a lot) + +#ifdef WPM_ENABLE + if (is_serial_link_master()) { + uint8_t current_wpm = get_current_wpm(); + if (current_wpm != last_sent_wpm) { + *begin_write_current_wpm() = current_wpm; + end_write_current_wpm(); + last_sent_wpm = current_wpm; + } + } else if (is_serial_link_connected()) { + uint8_t* new_wpm = read_current_wpm(); + if (new_wpm) { + set_current_wpm(*new_wpm); + } + } +#endif + matrix_scan_user(); } bool is_keyboard_master(void) { |