aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/LUFA/DoxygenPages/KnownIssues.txt')
-rw-r--r--lib/lufa/LUFA/DoxygenPages/KnownIssues.txt234
1 files changed, 0 insertions, 234 deletions
diff --git a/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt b/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt
deleted file mode 100644
index 183036c48..000000000
--- a/lib/lufa/LUFA/DoxygenPages/KnownIssues.txt
+++ /dev/null
@@ -1,234 +0,0 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
- /** \page Page_KnownIssues Known Issues
- * The following are known issues present in each official LUFA release. This list should contain all known
- * issues in the library. Most of these issues should be corrected in the future release - see
- * \ref Page_FutureChanges for a list of planned changes in future releases.
- *
- * \section Sec_KnownIssues170418 Version 170418
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8/10).
- * - Build System
- * - No known issues.
- * - Atmel Studio Integration
- * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts".
- * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition.
- *
- * \section Sec_KnownIssues151115 Version 151115
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8).
- * - Build System
- * - No known issues.
- * - Atmel Studio Integration
- * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts".
- * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition.
- *
- * \section Sec_KnownIssues140928 Version 140928
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8).
- * - Build System
- * - No known issues.
- * - Atmel Studio Integration
- * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts".
- * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition.
- *
- * \section Sec_KnownIssues140302 Version 140302
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8).
- * - Build System
- * - No known issues.
- * - Atmel Studio Integration
- * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts".
- * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition.
- *
- * \section Sec_KnownIssues130901 Version 130901
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8).
- * - Build System
- * - No known issues.
- * - Atmel Studio Integration
- * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts".
- * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition.
- *
- * \section Sec_KnownIssues130303 Version 130303
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8).
- * - Build System
- * - No known issues.
- *
- * \section Sec_KnownIssues120730 Version 120730
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8).
- * - Build System
- * - No known issues.
- */
-