aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c')
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c531
1 files changed, 0 insertions, 531 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
deleted file mode 100644
index 6553504d5..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * ISP Protocol handler, to process V2 Protocol wrapped ISP commands used in Atmel programmer devices.
- */
-
-#include "ISPProtocol.h"
-
-#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Handler for the CMD_ENTER_PROGMODE_ISP command, which attempts to enter programming mode on
- * the attached device, returning success or failure back to the host.
- */
-void ISPProtocol_EnterISPMode(void)
-{
- struct
- {
- uint8_t TimeoutMS;
- uint8_t PinStabDelayMS;
- uint8_t ExecutionDelayMS;
- uint8_t SynchLoops;
- uint8_t ByteDelay;
- uint8_t PollValue;
- uint8_t PollIndex;
- uint8_t EnterProgBytes[4];
- } Enter_ISP_Params;
-
- Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t ResponseStatus = STATUS_CMD_FAILED;
-
- CurrentAddress = 0;
-
- /* Perform execution delay, initialize SPI bus */
- ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
- ISPTarget_EnableTargetISP();
-
- ISPTarget_ChangeTargetResetLine(true);
- ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
-
- /* Continuously attempt to synchronize with the target until either the number of attempts specified
- * by the host has exceeded, or the the device sends back the expected response values */
- while (Enter_ISP_Params.SynchLoops-- && TimeoutTicksRemaining)
- {
- uint8_t ResponseBytes[4];
-
- for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
- {
- ISPProtocol_DelayMS(Enter_ISP_Params.ByteDelay);
- ResponseBytes[RByte] = ISPTarget_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
- }
-
- /* Check if polling disabled, or if the polled value matches the expected value */
- if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue))
- {
- ResponseStatus = STATUS_CMD_OK;
- break;
- }
- else
- {
- ISPTarget_ChangeTargetResetLine(false);
- ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
- ISPTarget_ChangeTargetResetLine(true);
- ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
- }
- }
-
- Endpoint_Write_8(CMD_ENTER_PROGMODE_ISP);
- Endpoint_Write_8(ResponseStatus);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_LEAVE_ISP command, which releases the target from programming mode. */
-void ISPProtocol_LeaveISPMode(void)
-{
- struct
- {
- uint8_t PreDelayMS;
- uint8_t PostDelayMS;
- } Leave_ISP_Params;
-
- Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- /* Perform pre-exit delay, release the target /RESET, disable the SPI bus and perform the post-exit delay */
- ISPProtocol_DelayMS(Leave_ISP_Params.PreDelayMS);
- ISPTarget_ChangeTargetResetLine(false);
- ISPTarget_DisableTargetISP();
- ISPProtocol_DelayMS(Leave_ISP_Params.PostDelayMS);
-
- Endpoint_Write_8(CMD_LEAVE_PROGMODE_ISP);
- Endpoint_Write_8(STATUS_CMD_OK);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes,
- * words or pages of data to the attached device.
- *
- * \param[in] V2Command Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_ProgramMemory(uint8_t V2Command)
-{
- struct
- {
- uint16_t BytesToWrite;
- uint8_t ProgrammingMode;
- uint8_t DelayMS;
- uint8_t ProgrammingCommands[3];
- uint8_t PollValue1;
- uint8_t PollValue2;
- uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
- } Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting
-
- Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) -
- sizeof(Write_Memory_Params.ProgData)), NULL);
- Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
-
- if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
- {
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- Endpoint_Write_8(V2Command);
- Endpoint_Write_8(STATUS_CMD_FAILED);
- Endpoint_ClearIN();
- return;
- }
-
- Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite, NULL);
-
- // The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need
- // to catch this and discard it before continuing on with packet processing to prevent communication issues
- if (((sizeof(uint8_t) + sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData)) +
- Write_Memory_Params.BytesToWrite) % AVRISP_DATA_EPSIZE == 0)
- {
- Endpoint_ClearOUT();
- Endpoint_WaitUntilReady();
- }
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t ProgrammingStatus = STATUS_CMD_OK;
- uint8_t PollValue = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 :
- Write_Memory_Params.PollValue2;
- uint16_t PollAddress = 0;
- uint8_t* NextWriteByte = Write_Memory_Params.ProgData;
- uint16_t PageStartAddress = (CurrentAddress & 0xFFFF);
-
- for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
- {
- uint8_t ByteToWrite = *(NextWriteByte++);
- uint8_t ProgrammingMode = Write_Memory_Params.ProgrammingMode;
-
- /* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
- if (MustLoadExtendedAddress)
- {
- ISPTarget_LoadExtendedAddress();
- MustLoadExtendedAddress = false;
- }
-
- ISPTarget_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
- ISPTarget_SendByte(CurrentAddress >> 8);
- ISPTarget_SendByte(CurrentAddress & 0xFF);
- ISPTarget_SendByte(ByteToWrite);
-
- /* AVR FLASH addressing requires us to modify the write command based on if we are writing a high
- * or low byte at the current word address */
- if (V2Command == CMD_PROGRAM_FLASH_ISP)
- Write_Memory_Params.ProgrammingCommands[0] ^= READ_WRITE_HIGH_BYTE_MASK;
-
- /* Check to see if we have a valid polling address */
- if (!(PollAddress) && (ByteToWrite != PollValue))
- {
- if ((CurrentByte & 0x01) && (V2Command == CMD_PROGRAM_FLASH_ISP))
- Write_Memory_Params.ProgrammingCommands[2] |= READ_WRITE_HIGH_BYTE_MASK;
- else
- Write_Memory_Params.ProgrammingCommands[2] &= ~READ_WRITE_HIGH_BYTE_MASK;
-
- PollAddress = (CurrentAddress & 0xFFFF);
- }
-
- /* If in word programming mode, commit the byte to the target's memory */
- if (!(ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK))
- {
- /* If the current polling address is invalid, switch to timed delay write completion mode */
- if (!(PollAddress) && !(ProgrammingMode & PROG_MODE_WORD_READYBUSY_MASK))
- ProgrammingMode = (ProgrammingMode & ~PROG_MODE_WORD_VALUE_MASK) | PROG_MODE_WORD_TIMEDELAY_MASK;
-
- ProgrammingStatus = ISPTarget_WaitForProgComplete(ProgrammingMode, PollAddress, PollValue,
- Write_Memory_Params.DelayMS,
- Write_Memory_Params.ProgrammingCommands[2]);
-
- /* Abort the programming loop early if the byte/word programming failed */
- if (ProgrammingStatus != STATUS_CMD_OK)
- break;
-
- /* Must reset the polling address afterwards, so it is not erroneously used for the next byte */
- PollAddress = 0;
- }
-
- /* EEPROM just increments the address each byte, flash needs to increment on each word and
- * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
- * address boundary has been crossed during FLASH memory programming */
- if ((CurrentByte & 0x01) || (V2Command == CMD_PROGRAM_EEPROM_ISP))
- {
- CurrentAddress++;
-
- if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
- MustLoadExtendedAddress = true;
- }
- }
-
- /* If the current page must be committed, send the PROGRAM PAGE command to the target */
- if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
- {
- ISPTarget_SendByte(Write_Memory_Params.ProgrammingCommands[1]);
- ISPTarget_SendByte(PageStartAddress >> 8);
- ISPTarget_SendByte(PageStartAddress & 0xFF);
- ISPTarget_SendByte(0x00);
-
- /* Check if polling is enabled and possible, if not switch to timed delay mode */
- if ((Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_VALUE_MASK) && !(PollAddress))
- {
- Write_Memory_Params.ProgrammingMode = (Write_Memory_Params.ProgrammingMode & ~PROG_MODE_PAGED_VALUE_MASK) |
- PROG_MODE_PAGED_TIMEDELAY_MASK;
- }
-
- ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue,
- Write_Memory_Params.DelayMS,
- Write_Memory_Params.ProgrammingCommands[2]);
-
- /* Check to see if the FLASH address has crossed the extended address boundary */
- if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
- MustLoadExtendedAddress = true;
- }
-
- Endpoint_Write_8(V2Command);
- Endpoint_Write_8(ProgrammingStatus);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes,
- * words or pages of data from the attached device.
- *
- * \param[in] V2Command Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_ReadMemory(uint8_t V2Command)
-{
- struct
- {
- uint16_t BytesToRead;
- uint8_t ReadMemoryCommand;
- } Read_Memory_Params;
-
- Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params), NULL);
- Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- Endpoint_Write_8(V2Command);
- Endpoint_Write_8(STATUS_CMD_OK);
-
- /* Read each byte from the device and write them to the packet for the host */
- for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
- {
- /* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
- if (MustLoadExtendedAddress)
- {
- ISPTarget_LoadExtendedAddress();
- MustLoadExtendedAddress = false;
- }
-
- /* Read the next byte from the desired memory space in the device */
- ISPTarget_SendByte(Read_Memory_Params.ReadMemoryCommand);
- ISPTarget_SendByte(CurrentAddress >> 8);
- ISPTarget_SendByte(CurrentAddress & 0xFF);
- Endpoint_Write_8(ISPTarget_ReceiveByte());
-
- /* Check if the endpoint bank is currently full, if so send the packet */
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
- Endpoint_WaitUntilReady();
- }
-
- /* AVR FLASH addressing requires us to modify the read command based on if we are reading a high
- * or low byte at the current word address */
- if (V2Command == CMD_READ_FLASH_ISP)
- Read_Memory_Params.ReadMemoryCommand ^= READ_WRITE_HIGH_BYTE_MASK;
-
- /* EEPROM just increments the address each byte, flash needs to increment on each word and
- * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
- * address boundary has been crossed */
- if ((CurrentByte & 0x01) || (V2Command == CMD_READ_EEPROM_ISP))
- {
- CurrentAddress++;
-
- if ((V2Command != CMD_READ_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
- MustLoadExtendedAddress = true;
- }
- }
-
- Endpoint_Write_8(STATUS_CMD_OK);
-
- bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
- Endpoint_ClearIN();
-
- /* Ensure last packet is a short packet to terminate the transfer */
- if (IsEndpointFull)
- {
- Endpoint_WaitUntilReady();
- Endpoint_ClearIN();
- Endpoint_WaitUntilReady();
- }
-}
-
-/** Handler for the CMD_CHI_ERASE_ISP command, clearing the target's FLASH memory. */
-void ISPProtocol_ChipErase(void)
-{
- struct
- {
- uint8_t EraseDelayMS;
- uint8_t PollMethod;
- uint8_t EraseCommandBytes[4];
- } Erase_Chip_Params;
-
- Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t ResponseStatus = STATUS_CMD_OK;
-
- /* Send the chip erase commands as given by the host to the device */
- for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++)
- ISPTarget_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]);
-
- /* Use appropriate command completion check as given by the host (delay or busy polling) */
- if (!(Erase_Chip_Params.PollMethod))
- ISPProtocol_DelayMS(Erase_Chip_Params.EraseDelayMS);
- else
- ResponseStatus = ISPTarget_WaitWhileTargetBusy();
-
- Endpoint_Write_8(CMD_CHIP_ERASE_ISP);
- Endpoint_Write_8(ResponseStatus);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands,
- * reading the requested configuration byte from the device.
- *
- * \param[in] V2Command Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command)
-{
- struct
- {
- uint8_t RetByte;
- uint8_t ReadCommandBytes[4];
- } Read_FuseLockSigOSCCAL_Params;
-
- Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t ResponseBytes[4];
-
- /* Send the Fuse or Lock byte read commands as given by the host to the device, store response */
- for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
- ResponseBytes[RByte] = ISPTarget_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
-
- Endpoint_Write_8(V2Command);
- Endpoint_Write_8(STATUS_CMD_OK);
- Endpoint_Write_8(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]);
- Endpoint_Write_8(STATUS_CMD_OK);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration
- * byte to the device.
- *
- * \param[in] V2Command Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_WriteFuseLock(uint8_t V2Command)
-{
- struct
- {
- uint8_t WriteCommandBytes[4];
- } Write_FuseLockSig_Params;
-
- Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- /* Send the Fuse or Lock byte program commands as given by the host to the device */
- for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
- ISPTarget_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
-
- Endpoint_Write_8(V2Command);
- Endpoint_Write_8(STATUS_CMD_OK);
- Endpoint_Write_8(STATUS_CMD_OK);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_SPI_MULTI command, writing and reading arbitrary SPI data to and from the attached device. */
-void ISPProtocol_SPIMulti(void)
-{
- struct
- {
- uint8_t TxBytes;
- uint8_t RxBytes;
- uint8_t RxStartAddr;
- uint8_t TxData[255];
- } SPI_Multi_Params;
-
- Endpoint_Read_Stream_LE(&SPI_Multi_Params, (sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)), NULL);
- Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes, NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- Endpoint_Write_8(CMD_SPI_MULTI);
- Endpoint_Write_8(STATUS_CMD_OK);
-
- uint8_t CurrTxPos = 0;
- uint8_t CurrRxPos = 0;
-
- /* Write out bytes to transmit until the start of the bytes to receive is met */
- while (CurrTxPos < SPI_Multi_Params.RxStartAddr)
- {
- if (CurrTxPos < SPI_Multi_Params.TxBytes)
- ISPTarget_SendByte(SPI_Multi_Params.TxData[CurrTxPos]);
- else
- ISPTarget_SendByte(0);
-
- CurrTxPos++;
- }
-
- /* Transmit remaining bytes with padding as needed, read in response bytes */
- while (CurrRxPos < SPI_Multi_Params.RxBytes)
- {
- if (CurrTxPos < SPI_Multi_Params.TxBytes)
- Endpoint_Write_8(ISPTarget_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++]));
- else
- Endpoint_Write_8(ISPTarget_ReceiveByte());
-
- /* Check to see if we have filled the endpoint bank and need to send the packet */
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
- Endpoint_WaitUntilReady();
- }
-
- CurrRxPos++;
- }
-
- Endpoint_Write_8(STATUS_CMD_OK);
-
- bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
- Endpoint_ClearIN();
-
- /* Ensure last packet is a short packet to terminate the transfer */
- if (IsEndpointFull)
- {
- Endpoint_WaitUntilReady();
- Endpoint_ClearIN();
- Endpoint_WaitUntilReady();
- }
-}
-
-/** Blocking delay for a given number of milliseconds. This provides a simple wrapper around
- * the avr-libc provided delay function, so that the delay function can be called with a
- * constant value (to prevent run-time floating point operations being required).
- *
- * \param[in] DelayMS Number of milliseconds to delay for
- */
-void ISPProtocol_DelayMS(uint8_t DelayMS)
-{
- while (DelayMS-- && TimeoutTicksRemaining)
- Delay_MS(1);
-}
-
-#endif
-