aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/AVRISP-MKII/Lib/V2Protocol.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/V2Protocol.c')
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/V2Protocol.c267
1 files changed, 267 insertions, 0 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/V2Protocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/V2Protocol.c
new file mode 100644
index 000000000..fd64c5a1e
--- /dev/null
+++ b/lib/lufa/Projects/AVRISP-MKII/Lib/V2Protocol.c
@@ -0,0 +1,267 @@
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2017.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * V2Protocol handler, to process V2 Protocol commands used in Atmel programmer devices.
+ */
+
+#define INCLUDE_FROM_V2PROTOCOL_C
+#include "V2Protocol.h"
+
+/** Current memory address for FLASH/EEPROM memory read/write commands */
+uint32_t CurrentAddress;
+
+/** Flag to indicate that the next read/write operation must update the device's current extended FLASH address */
+bool MustLoadExtendedAddress;
+
+
+/** ISR to manage timeouts whilst processing a V2Protocol command */
+ISR(TIMER0_COMPA_vect, ISR_NOBLOCK)
+{
+ if (TimeoutTicksRemaining)
+ TimeoutTicksRemaining--;
+ else
+ TCCR0B = 0;
+}
+
+/** Initializes the hardware and software associated with the V2 protocol command handling. */
+void V2Protocol_Init(void)
+{
+ #if defined(ADC) && !defined(NO_VTARGET_DETECT)
+ /* Initialize the ADC converter for VTARGET level detection on supported AVR models */
+ ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
+ ADC_SetupChannel(VTARGET_ADC_CHANNEL);
+ ADC_StartReading(VTARGET_REF_MASK | ADC_RIGHT_ADJUSTED | VTARGET_ADC_CHANNEL_MASK);
+ #endif
+
+ /* Timeout timer initialization (~10ms period) */
+ OCR0A = (((F_CPU / 1024) / 100) - 1);
+ TCCR0A = (1 << WGM01);
+ TIMSK0 = (1 << OCIE0A);
+
+ V2Params_LoadNonVolatileParamValues();
+
+ #if defined(ENABLE_ISP_PROTOCOL)
+ ISPTarget_ConfigureRescueClock();
+ #endif
+}
+
+/** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.
+ * This routine decodes the issued command and passes off the handling of the command to the
+ * appropriate function.
+ */
+void V2Protocol_ProcessCommand(void)
+{
+ uint8_t V2Command = Endpoint_Read_8();
+
+ /* Reset timeout counter duration and start the timer */
+ TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
+ TCCR0B = ((1 << CS02) | (1 << CS00));
+
+ switch (V2Command)
+ {
+ case CMD_SIGN_ON:
+ V2Protocol_SignOn();
+ break;
+ case CMD_SET_PARAMETER:
+ case CMD_GET_PARAMETER:
+ V2Protocol_GetSetParam(V2Command);
+ break;
+ case CMD_LOAD_ADDRESS:
+ V2Protocol_LoadAddress();
+ break;
+ case CMD_RESET_PROTECTION:
+ V2Protocol_ResetProtection();
+ break;
+#if defined(ENABLE_ISP_PROTOCOL)
+ case CMD_ENTER_PROGMODE_ISP:
+ ISPProtocol_EnterISPMode();
+ break;
+ case CMD_LEAVE_PROGMODE_ISP:
+ ISPProtocol_LeaveISPMode();
+ break;
+ case CMD_PROGRAM_FLASH_ISP:
+ case CMD_PROGRAM_EEPROM_ISP:
+ ISPProtocol_ProgramMemory(V2Command);
+ break;
+ case CMD_READ_FLASH_ISP:
+ case CMD_READ_EEPROM_ISP:
+ ISPProtocol_ReadMemory(V2Command);
+ break;
+ case CMD_CHIP_ERASE_ISP:
+ ISPProtocol_ChipErase();
+ break;
+ case CMD_READ_FUSE_ISP:
+ case CMD_READ_LOCK_ISP:
+ case CMD_READ_SIGNATURE_ISP:
+ case CMD_READ_OSCCAL_ISP:
+ ISPProtocol_ReadFuseLockSigOSCCAL(V2Command);
+ break;
+ case CMD_PROGRAM_FUSE_ISP:
+ case CMD_PROGRAM_LOCK_ISP:
+ ISPProtocol_WriteFuseLock(V2Command);
+ break;
+ case CMD_SPI_MULTI:
+ ISPProtocol_SPIMulti();
+ break;
+#endif
+#if defined(ENABLE_XPROG_PROTOCOL)
+ case CMD_XPROG_SETMODE:
+ XPROGProtocol_SetMode();
+ break;
+ case CMD_XPROG:
+ XPROGProtocol_Command();
+ break;
+#endif
+ default:
+ V2Protocol_UnknownCommand(V2Command);
+ break;
+ }
+
+ /* Disable the timeout management timer */
+ TCCR0B = 0;
+
+ Endpoint_WaitUntilReady();
+ Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
+}
+
+/** Handler for unknown V2 protocol commands. This discards all sent data and returns a
+ * STATUS_CMD_UNKNOWN status back to the host.
+ *
+ * \param[in] V2Command Issued V2 Protocol command byte from the host
+ */
+static void V2Protocol_UnknownCommand(const uint8_t V2Command)
+{
+ /* Discard all incoming data */
+ while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)
+ {
+ Endpoint_ClearOUT();
+ Endpoint_WaitUntilReady();
+ }
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_8(V2Command);
+ Endpoint_Write_8(STATUS_CMD_UNKNOWN);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
+static void V2Protocol_SignOn(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_8(CMD_SIGN_ON);
+ Endpoint_Write_8(STATUS_CMD_OK);
+ Endpoint_Write_8(sizeof(PROGRAMMER_ID) - 1);
+ Endpoint_Write_Stream_LE(PROGRAMMER_ID, (sizeof(PROGRAMMER_ID) - 1), NULL);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the CMD_RESET_PROTECTION command, implemented as a dummy ACK function as
+ * no target short-circuit protection is currently implemented.
+ */
+static void V2Protocol_ResetProtection(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_8(CMD_RESET_PROTECTION);
+ Endpoint_Write_8(STATUS_CMD_OK);
+ Endpoint_ClearIN();
+}
+
+
+/** Handler for the CMD_SET_PARAMETER and CMD_GET_PARAMETER commands from the host, setting or
+ * getting a device parameter's value from the parameter table.
+ *
+ * \param[in] V2Command Issued V2 Protocol command byte from the host
+ */
+static void V2Protocol_GetSetParam(const uint8_t V2Command)
+{
+ uint8_t ParamID = Endpoint_Read_8();
+ uint8_t ParamValue;
+
+ if (V2Command == CMD_SET_PARAMETER)
+ ParamValue = Endpoint_Read_8();
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_8(V2Command);
+
+ uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);
+
+ if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
+ {
+ Endpoint_Write_8(STATUS_CMD_OK);
+ V2Params_SetParameterValue(ParamID, ParamValue);
+ }
+ else if ((V2Command == CMD_GET_PARAMETER) && (ParamPrivs & PARAM_PRIV_READ))
+ {
+ Endpoint_Write_8(STATUS_CMD_OK);
+ Endpoint_Write_8(V2Params_GetParameterValue(ParamID));
+ }
+ else
+ {
+ Endpoint_Write_8(STATUS_CMD_FAILED);
+ }
+
+ Endpoint_ClearIN();
+}
+
+/** Handler for the CMD_LOAD_ADDRESS command, loading the given device address into a
+ * global storage variable for later use, and issuing LOAD EXTENDED ADDRESS commands
+ * to the attached device as required.
+ */
+static void V2Protocol_LoadAddress(void)
+{
+ Endpoint_Read_Stream_BE(&CurrentAddress, sizeof(CurrentAddress), NULL);
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ if (CurrentAddress & (1UL << 31))
+ MustLoadExtendedAddress = true;
+
+ Endpoint_Write_8(CMD_LOAD_ADDRESS);
+ Endpoint_Write_8(STATUS_CMD_OK);
+ Endpoint_ClearIN();
+}
+