aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c')
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c209
1 files changed, 209 insertions, 0 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
new file mode 100644
index 000000000..0455329c3
--- /dev/null
+++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -0,0 +1,209 @@
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2017.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Target-related functions for the PDI Protocol decoder.
+ */
+
+#define INCLUDE_FROM_XPROGTARGET_C
+#include "XPROGTarget.h"
+
+#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
+
+/** Flag to indicate if the USART is currently in Tx or Rx mode. */
+bool IsSending;
+
+/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
+void XPROGTarget_EnableTargetPDI(void)
+{
+ IsSending = false;
+
+ /* Set Tx and XCK as outputs, Rx as input */
+ DDRD |= (1 << 5) | (1 << 3);
+ DDRD &= ~(1 << 2);
+
+ /* Set DATA line high for at least 90ns to disable /RESET functionality */
+ PORTD |= (1 << 3);
+ _delay_us(100);
+
+ /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
+ UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
+ UCSR1B = (1 << TXEN1);
+ UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
+
+ /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
+ XPROGTarget_SendIdle();
+ XPROGTarget_SendIdle();
+}
+
+/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
+void XPROGTarget_EnableTargetTPI(void)
+{
+ IsSending = false;
+
+ /* Set /RESET line low for at least 400ns to enable TPI functionality */
+ AUX_LINE_DDR |= AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
+ _delay_us(100);
+
+ /* Set Tx and XCK as outputs, Rx as input */
+ DDRD |= (1 << 5) | (1 << 3);
+ DDRD &= ~(1 << 2);
+
+ /* Set up the synchronous USART for TPI communications - 8 data bits, even parity, 2 stop bits */
+ UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
+ UCSR1B = (1 << TXEN1);
+ UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
+
+ /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+ XPROGTarget_SendIdle();
+ XPROGTarget_SendIdle();
+}
+
+/** Disables the target's PDI interface, exits programming mode and starts the target's application. */
+void XPROGTarget_DisableTargetPDI(void)
+{
+ /* Switch to Rx mode to ensure that all pending transmissions are complete */
+ if (IsSending)
+ XPROGTarget_SetRxMode();
+
+ /* Turn off receiver and transmitter of the USART, clear settings */
+ UCSR1A = ((1 << TXC1) | (1 << RXC1));
+ UCSR1B = 0;
+ UCSR1C = 0;
+
+ /* Tristate all pins */
+ DDRD &= ~((1 << 5) | (1 << 3));
+ PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
+}
+
+/** Disables the target's TPI interface, exits programming mode and starts the target's application. */
+void XPROGTarget_DisableTargetTPI(void)
+{
+ /* Switch to Rx mode to ensure that all pending transmissions are complete */
+ if (IsSending)
+ XPROGTarget_SetRxMode();
+
+ /* Turn off receiver and transmitter of the USART, clear settings */
+ UCSR1A |= (1 << TXC1) | (1 << RXC1);
+ UCSR1B = 0;
+ UCSR1C = 0;
+
+ /* Set all USART lines as inputs, tristate */
+ DDRD &= ~((1 << 5) | (1 << 3));
+ PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
+
+ /* Tristate target /RESET line */
+ AUX_LINE_DDR &= ~AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
+}
+
+/** Sends a byte via the USART.
+ *
+ * \param[in] Byte Byte to send through the USART
+ */
+void XPROGTarget_SendByte(const uint8_t Byte)
+{
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ XPROGTarget_SetTxMode();
+
+ /* Wait until there is space in the hardware Tx buffer before writing */
+ while (!(UCSR1A & (1 << UDRE1)));
+ UCSR1A |= (1 << TXC1);
+ UDR1 = Byte;
+}
+
+/** Receives a byte via the hardware USART, blocking until data is received or timeout expired.
+ *
+ * \return Received byte from the USART
+ */
+uint8_t XPROGTarget_ReceiveByte(void)
+{
+ /* Switch to Rx mode if currently in Tx mode */
+ if (IsSending)
+ XPROGTarget_SetRxMode();
+
+ /* Wait until a byte has been received before reading */
+ while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
+
+ return UDR1;
+}
+
+/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
+void XPROGTarget_SendIdle(void)
+{
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ XPROGTarget_SetTxMode();
+
+ /* Need to do nothing for a full frame to send an IDLE */
+ for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
+ {
+ /* Wait for a full cycle of the clock */
+ while (PIND & (1 << 5));
+ while (!(PIND & (1 << 5)));
+ while (PIND & (1 << 5));
+ }
+}
+
+static void XPROGTarget_SetTxMode(void)
+{
+ /* Wait for a full cycle of the clock */
+ while (PIND & (1 << 5));
+ while (!(PIND & (1 << 5)));
+ while (PIND & (1 << 5));
+
+ PORTD |= (1 << 3);
+ DDRD |= (1 << 3);
+
+ UCSR1B &= ~(1 << RXEN1);
+ UCSR1B |= (1 << TXEN1);
+
+ IsSending = true;
+}
+
+static void XPROGTarget_SetRxMode(void)
+{
+ while (!(UCSR1A & (1 << TXC1)));
+ UCSR1A |= (1 << TXC1);
+
+ UCSR1B &= ~(1 << TXEN1);
+ UCSR1B |= (1 << RXEN1);
+
+ DDRD &= ~(1 << 3);
+ PORTD &= ~(1 << 3);
+
+ IsSending = false;
+}
+
+#endif
+