aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG')
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c274
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h86
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c468
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h140
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c480
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h136
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c209
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h136
8 files changed, 0 insertions, 1929 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
deleted file mode 100644
index 22eb7d74c..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Target-related functions for the TINY target's NVM module.
- */
-
-#define INCLUDE_FROM_TINYNVM_C
-#include "TINYNVM.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Sends the given pointer address to the target's TPI pointer register */
-static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
-{
- /* Send the given 16-bit address to the target, LSB first */
- XPROGTarget_SendByte(TPI_CMD_SSTPR | 0);
- XPROGTarget_SendByte(AbsoluteAddress & 0xFF);
- XPROGTarget_SendByte(TPI_CMD_SSTPR | 1);
- XPROGTarget_SendByte(AbsoluteAddress >> 8);
-}
-
-/** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.
- *
- * \param[in] Address 6-bit I/O address to write to in the target's I/O memory space
- */
-static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
-{
- /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
- * two bits of the 6-bit address are shifted left once - use function to reduce code size */
- XPROGTarget_SendByte(TPI_CMD_SIN(Address));
-}
-
-/** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read.
- *
- * \param[in] Address 6-bit I/O address to read from in the target's I/O memory space
- */
-static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
-{
- /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
- * two bits of the 6-bit address are shifted left once - use function to reduce code size */
- XPROGTarget_SendByte(TPI_CMD_SOUT(Address));
-}
-
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
- *
- * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool TINYNVM_WaitWhileNVMBusBusy(void)
-{
- /* Poll the STATUS register to check to see if NVM access has been enabled */
- for (;;)
- {
- /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
- XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS));
-
- uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
- /* We might have timed out waiting for the status register read response, check here */
- if (!(TimeoutTicksRemaining))
- return false;
-
- /* Check the status register read response to see if the NVM bus is enabled */
- if (StatusRegister & TPI_STATUS_NVM)
- return true;
- }
-}
-
-/** Waits while the target's NVM controller is busy performing an operation, exiting if the
- * timeout period expires.
- *
- * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool TINYNVM_WaitWhileNVMControllerBusy(void)
-{
- /* Poll the STATUS register to check to see if NVM access has been enabled */
- for (;;)
- {
- /* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
- TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);
-
- uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
- /* We might have timed out waiting for the status register read response, check here */
- if (!(TimeoutTicksRemaining))
- return false;
-
- /* Check to see if the BUSY flag is still set */
- if (!(StatusRegister & (1 << 7)))
- return true;
- }
-}
-
-/** Enables the physical TPI interface on the target and enables access to the internal NVM controller.
- *
- * \return Boolean \c true if the TPI interface was enabled successfully, \c false otherwise
- */
-bool TINYNVM_EnableTPI(void)
-{
- /* Enable TPI programming mode with the attached target */
- XPROGTarget_EnableTargetTPI();
-
- /* Lower direction change guard time to 32 USART bits */
- XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_CTRL));
- XPROGTarget_SendByte(0x02);
-
- /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
- XPROGTarget_SendByte(TPI_CMD_SKEY);
- for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
- XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
-
- /* Wait until the NVM bus becomes active */
- return TINYNVM_WaitWhileNVMBusBusy();
-}
-
-/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */
-void TINYNVM_DisableTPI(void)
-{
- TINYNVM_WaitWhileNVMBusBusy();
-
- do
- {
- /* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
- XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_STATUS));
- XPROGTarget_SendByte(0x00);
-
- /* Read back the STATUS register, check to see if it took effect */
- XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS));
- } while (XPROGTarget_ReceiveByte() != 0x00);
-
- XPROGTarget_DisableTargetTPI();
-}
-
-/** Reads memory from the target's memory spaces.
- *
- * \param[in] ReadAddress Start address to read from within the target's address space
- * \param[out] ReadBuffer Buffer to store read data into
- * \param[in] ReadSize Length of the data to read from the device
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
- uint8_t* ReadBuffer,
- uint16_t ReadSize)
-{
- /* Wait until the NVM controller is no longer busy */
- if (!(TINYNVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Set the NVM control register to the NO OP command for memory reading */
- TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
- XPROGTarget_SendByte(TINY_NVM_CMD_NOOP);
-
- /* Send the address of the location to read from */
- TINYNVM_SendPointerAddress(ReadAddress);
-
- while (ReadSize-- && TimeoutTicksRemaining)
- {
- /* Read the byte of data from the target */
- XPROGTarget_SendByte(TPI_CMD_SLD(TPI_POINTER_INDIRECT_PI));
- *(ReadBuffer++) = XPROGTarget_ReceiveByte();
- }
-
- return (TimeoutTicksRemaining > 0);
-}
-
-/** Writes word addressed memory to the target's memory spaces.
- *
- * \param[in] WriteAddress Start address to write to within the target's address space
- * \param[in] WriteBuffer Buffer to source data from
- * \param[in] WriteLength Total number of bytes to write to the device (must be an integer multiple of 2)
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
- uint8_t* WriteBuffer,
- uint16_t WriteLength)
-{
- /* Wait until the NVM controller is no longer busy */
- if (!(TINYNVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */
- if (WriteLength & 0x01)
- WriteBuffer[WriteLength++] = 0xFF;
-
- /* Set the NVM control register to the WORD WRITE command for memory writing */
- TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
- XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE);
-
- /* Send the address of the location to write to */
- TINYNVM_SendPointerAddress(WriteAddress);
-
- while (WriteLength)
- {
- /* Wait until the NVM controller is no longer busy */
- if (!(TINYNVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Write the low byte of data to the target */
- XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI));
- XPROGTarget_SendByte(*(WriteBuffer++));
-
- /* Write the high byte of data to the target */
- XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI));
- XPROGTarget_SendByte(*(WriteBuffer++));
-
- /* Need to decrement the write length twice, since we wrote a whole two-byte word */
- WriteLength -= 2;
- }
-
- return true;
-}
-
-/** Erases the target's memory space.
- *
- * \param[in] EraseCommand NVM erase command to send to the device
- * \param[in] Address Address inside the memory space to erase
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
- const uint16_t Address)
-{
- /* Wait until the NVM controller is no longer busy */
- if (!(TINYNVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Set the NVM control register to the target memory erase command */
- TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
- XPROGTarget_SendByte(EraseCommand);
-
- /* Write to a high byte location within the target address space to start the erase process */
- TINYNVM_SendPointerAddress(Address | 0x0001);
- XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT));
- XPROGTarget_SendByte(0x00);
-
- /* Wait until the NVM controller is no longer busy */
- if (!(TINYNVM_WaitWhileNVMControllerBusy()))
- return false;
-
- return true;
-}
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
deleted file mode 100644
index 61389bb45..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for TINYNVM.c.
- */
-
-#ifndef _TINY_NVM_
-#define _TINY_NVM_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <stdbool.h>
-
- #include <LUFA/Common/Common.h>
-
- #include "XPROGProtocol.h"
- #include "XPROGTarget.h"
- #include "Config/AppConfig.h"
-
- /* Preprocessor Checks: */
- #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #undef ENABLE_ISP_PROTOCOL
-
- #if !defined(ENABLE_XPROG_PROTOCOL)
- #define ENABLE_XPROG_PROTOCOL
- #endif
- #endif
-
- /* Defines: */
- #define TINY_NVM_CMD_NOOP 0x00
- #define TINY_NVM_CMD_CHIPERASE 0x10
- #define TINY_NVM_CMD_SECTIONERASE 0x14
- #define TINY_NVM_CMD_WORDWRITE 0x1D
-
- /* Function Prototypes: */
- bool TINYNVM_WaitWhileNVMBusBusy(void);
- bool TINYNVM_WaitWhileNVMControllerBusy(void);
- bool TINYNVM_EnableTPI(void);
- void TINYNVM_DisableTPI(void);
- bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
- uint8_t* ReadBuffer,
- uint16_t ReadLength);
- bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
- uint8_t* WriteBuffer,
- uint16_t WriteLength);
- bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
- const uint16_t Address);
-
- #if (defined(INCLUDE_FROM_TINYNVM_C) && defined(ENABLE_XPROG_PROTOCOL))
- static void TINYNVM_SendReadNVMRegister(const uint8_t Address);
- static void TINYNVM_SendWriteNVMRegister(const uint8_t Address);
- static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress);
- #endif
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
deleted file mode 100644
index 0208a634b..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Target-related functions for the XMEGA target's NVM module.
- */
-
-#define INCLUDE_FROM_XMEGA_NVM_C
-#include "XMEGANVM.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Sends the given 32-bit absolute address to the target.
- *
- * \param[in] AbsoluteAddress Absolute address to send to the target
- */
-static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress)
-{
- /* Send the given 32-bit address to the target, LSB first */
- XPROGTarget_SendByte(AbsoluteAddress & 0xFF);
- XPROGTarget_SendByte(AbsoluteAddress >> 8);
- XPROGTarget_SendByte(AbsoluteAddress >> 16);
- XPROGTarget_SendByte(AbsoluteAddress >> 24);
-}
-
-/** Sends the given NVM register address to the target.
- *
- * \param[in] Register NVM register whose absolute address is to be sent
- */
-static void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
-{
- /* Determine the absolute register address from the NVM base memory address and the NVM register address */
- uint32_t Address = XPROG_Param_NVMBase | Register;
-
- /* Send the calculated 32-bit address to the target, LSB first */
- XMEGANVM_SendAddress(Address);
-}
-
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
- * calculation.
- *
- * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool XMEGANVM_WaitWhileNVMBusBusy(void)
-{
- /* Poll the STATUS register to check to see if NVM access has been enabled */
- for (;;)
- {
- /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
- XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_STATUS));
-
- uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
- /* We might have timed out waiting for the status register read response, check here */
- if (!(TimeoutTicksRemaining))
- return false;
-
- /* Check the status register read response to see if the NVM bus is enabled */
- if (StatusRegister & PDI_STATUS_NVM)
- return true;
- }
-}
-
-/** Waits while the target's NVM controller is busy performing an operation, exiting if the
- * timeout period expires.
- *
- * \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool XMEGANVM_WaitWhileNVMControllerBusy(void)
-{
- /* Preload the pointer register with the NVM STATUS register address to check the BUSY flag */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
-
- /* Poll the NVM STATUS register while the NVM controller is busy */
- for (;;)
- {
- /* Fetch the current status value via the pointer register (without auto-increment afterwards) */
- XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT, PDI_DATASIZE_1BYTE));
-
- uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
- /* We might have timed out waiting for the status register read response, check here */
- if (!(TimeoutTicksRemaining))
- return false;
-
- /* Check to see if the BUSY flag is still set */
- if (!(StatusRegister & (1 << 7)))
- return true;
- }
-}
-
-/** Enables the physical PDI interface on the target and enables access to the internal NVM controller.
- *
- * \return Boolean \c true if the PDI interface was enabled successfully, \c false otherwise
- */
-bool XMEGANVM_EnablePDI(void)
-{
- /* Enable PDI programming mode with the attached target */
- XPROGTarget_EnableTargetPDI();
-
- /* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
- XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET));
- XPROGTarget_SendByte(PDI_RESET_KEY);
-
- /* Lower direction change guard time to 32 USART bits */
- XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_CTRL));
- XPROGTarget_SendByte(0x02);
-
- /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
- XPROGTarget_SendByte(PDI_CMD_KEY);
- for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
- XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
-
- /* Wait until the NVM bus becomes active */
- return XMEGANVM_WaitWhileNVMBusBusy();
-}
-
-/** Removes access to the target's NVM controller and physically disables the target's physical PDI interface. */
-void XMEGANVM_DisablePDI(void)
-{
- XMEGANVM_WaitWhileNVMBusBusy();
-
- /* Clear the RESET key in the RESET PDI register to allow the XMEGA to run - must perform this until the
- * change takes effect, as in some cases it takes multiple writes (silicon bug?).
- */
- do
- {
- /* Clear reset register */
- XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET));
- XPROGTarget_SendByte(0x00);
-
- /* Read back the reset register, check to see if it took effect */
- XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_RESET));
- } while (XPROGTarget_ReceiveByte() != 0x00);
-
- XPROGTarget_DisableTargetPDI();
-}
-
-/** Retrieves the CRC value of the given memory space.
- *
- * \param[in] CRCCommand NVM CRC command to issue to the target
- * \param[out] CRCDest CRC Destination when read from the target
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand,
- uint32_t* const CRCDest)
-{
- *CRCDest = 0;
-
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Set the NVM command to the correct CRC read command */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(CRCCommand);
-
- /* Set CMDEX bit in NVM CTRLA register to start the CRC generation */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
- XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-
- /* Wait until the NVM bus is ready again */
- if (!(XMEGANVM_WaitWhileNVMBusBusy()))
- return false;
-
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Load the PDI pointer register with the DAT0 register start address */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);
-
- /* Send the REPEAT command to grab the CRC bytes */
- XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
- XPROGTarget_SendByte(XMEGA_CRC_LENGTH_BYTES - 1);
-
- /* Read in the CRC bytes from the target */
- XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
- for (uint8_t i = 0; i < XMEGA_CRC_LENGTH_BYTES; i++)
- ((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte();
-
- return (TimeoutTicksRemaining > 0);
-}
-
-/** Reads memory from the target's memory spaces.
- *
- * \param[in] ReadAddress Start address to read from within the target's address space
- * \param[out] ReadBuffer Buffer to store read data into
- * \param[in] ReadSize Number of bytes to read
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_ReadMemory(const uint32_t ReadAddress,
- uint8_t* ReadBuffer,
- uint16_t ReadSize)
-{
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Send the READNVM command to the NVM controller for reading of an arbitrary location */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(XMEGA_NVM_CMD_READNVM);
-
- if (ReadSize > 1)
- {
- /* Load the PDI pointer register with the start address we want to read from */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
- XMEGANVM_SendAddress(ReadAddress);
-
- /* Send the REPEAT command with the specified number of bytes to read */
- XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
- XPROGTarget_SendByte(ReadSize - 1);
-
- /* Send a LD command with indirect access and post-increment to read out the bytes */
- XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
- while (ReadSize-- && TimeoutTicksRemaining)
- *(ReadBuffer++) = XPROGTarget_ReceiveByte();
- }
- else
- {
- /* Send a LDS command with the read address to read out the requested byte */
- XPROGTarget_SendByte(PDI_CMD_LDS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendAddress(ReadAddress);
- *(ReadBuffer++) = XPROGTarget_ReceiveByte();
- }
-
- return (TimeoutTicksRemaining > 0);
-}
-
-/** Writes byte addressed memory to the target's memory spaces.
- *
- * \param[in] WriteCommand Command to send to the device to write each memory byte
- * \param[in] WriteAddress Address to write to within the target's address space
- * \param[in] Byte Byte to write to the target
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand,
- const uint32_t WriteAddress,
- const uint8_t Byte)
-{
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Send the memory write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(WriteCommand);
-
- /* Send new memory byte to the memory of the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendAddress(WriteAddress);
- XPROGTarget_SendByte(Byte);
-
- return true;
-}
-
-/** Writes page addressed memory to the target's memory spaces.
- *
- * \param[in] WriteBuffCommand Command to send to the device to write a byte to the memory page buffer
- * \param[in] EraseBuffCommand Command to send to the device to erase the memory page buffer
- * \param[in] WritePageCommand Command to send to the device to write the page buffer to the destination memory
- * \param[in] PageMode Bitfield indicating what operations need to be executed on the specified page
- * \param[in] WriteAddress Start address to write the page data to within the target's address space
- * \param[in] WriteBuffer Buffer to source data from
- * \param[in] WriteSize Number of bytes to write
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
- const uint8_t EraseBuffCommand,
- const uint8_t WritePageCommand,
- const uint8_t PageMode,
- const uint32_t WriteAddress,
- const uint8_t* WriteBuffer,
- uint16_t WriteSize)
-{
- if (PageMode & XPROG_PAGEMODE_ERASE)
- {
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Send the memory buffer erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(EraseBuffCommand);
-
- /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
- XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
- }
-
- if (WriteSize)
- {
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Send the memory buffer write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(WriteBuffCommand);
-
- /* Load the PDI pointer register with the start address we want to write to */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
- XMEGANVM_SendAddress(WriteAddress);
-
- /* Send the REPEAT command with the specified number of bytes to write */
- XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
- XPROGTarget_SendByte(WriteSize - 1);
-
- /* Send a ST command with indirect access and post-increment to write the bytes */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
- while (WriteSize--)
- XPROGTarget_SendByte(*(WriteBuffer++));
- }
-
- if (PageMode & XPROG_PAGEMODE_WRITE)
- {
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Send the memory write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(WritePageCommand);
-
- /* Send the address of the first page location to write the memory page */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendAddress(WriteAddress);
- XPROGTarget_SendByte(0x00);
- }
-
- return true;
-}
-
-/** Erases a specific memory space of the target.
- *
- * \param[in] EraseCommand NVM erase command to send to the device
- * \param[in] Address Address inside the memory space to erase
- *
- * \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_EraseMemory(const uint8_t EraseCommand,
- const uint32_t Address)
-{
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* EEPROM and Chip erasures are triggered differently to FLASH section erasures */
- if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)
- {
- /* Send the memory erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(EraseCommand);
-
- /* Set CMDEX bit in NVM CTRLA register to start the erase sequence */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
- XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
- }
- else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM)
- {
- /* Send the EEPROM page buffer erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF);
-
- /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
- XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-
- /* Wait until the NVM controller is no longer busy */
- if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
- return false;
-
- /* Send the EEPROM memory buffer write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF);
-
- /* Load the PDI pointer register with the EEPROM page start address */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
- XMEGANVM_SendAddress(Address);
-
- /* Send the REPEAT command with the specified number of bytes to write */
- XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
- XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1);
-
- /* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */
- XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
- for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++)
- XPROGTarget_SendByte(0x00);
-
- /* Send the memory erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(EraseCommand);
-
- /* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
- XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
- }
- else
- {
- /* Send the memory erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
- XPROGTarget_SendByte(EraseCommand);
-
- /* Other erase modes just need us to address a byte within the target memory space */
- XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
- XMEGANVM_SendAddress(Address);
- XPROGTarget_SendByte(0x00);
- }
-
- /* Wait until the NVM bus is ready again */
- if (!(XMEGANVM_WaitWhileNVMBusBusy()))
- return false;
-
- return true;
-}
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
deleted file mode 100644
index 8a8c5b048..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for XMEGANVM.c.
- */
-
-#ifndef _XMEGA_NVM_
-#define _XMEGA_NVM_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <stdbool.h>
-
- #include <LUFA/Common/Common.h>
-
- #include "XPROGProtocol.h"
- #include "XPROGTarget.h"
- #include "Config/AppConfig.h"
-
- /* Preprocessor Checks: */
- #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #undef ENABLE_ISP_PROTOCOL
-
- #if !defined(ENABLE_XPROG_PROTOCOL)
- #define ENABLE_XPROG_PROTOCOL
- #endif
- #endif
-
- /* Defines: */
- #define XMEGA_CRC_LENGTH_BYTES 3
-
- #define XMEGA_NVM_REG_ADDR0 0x00
- #define XMEGA_NVM_REG_ADDR1 0x01
- #define XMEGA_NVM_REG_ADDR2 0x02
- #define XMEGA_NVM_REG_DAT0 0x04
- #define XMEGA_NVM_REG_DAT1 0x05
- #define XMEGA_NVM_REG_DAT2 0x06
- #define XMEGA_NVM_REG_CMD 0x0A
- #define XMEGA_NVM_REG_CTRLA 0x0B
- #define XMEGA_NVM_REG_CTRLB 0x0C
- #define XMEGA_NVM_REG_INTCTRL 0x0D
- #define XMEGA_NVM_REG_STATUS 0x0F
- #define XMEGA_NVM_REG_LOCKBITS 0x10
-
- #define XMEGA_NVM_BIT_CTRLA_CMDEX (1 << 0)
-
- #define XMEGA_NVM_CMD_NOOP 0x00
- #define XMEGA_NVM_CMD_CHIPERASE 0x40
- #define XMEGA_NVM_CMD_READNVM 0x43
- #define XMEGA_NVM_CMD_LOADFLASHPAGEBUFF 0x23
- #define XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF 0x26
- #define XMEGA_NVM_CMD_ERASEFLASHPAGE 0x2B
- #define XMEGA_NVM_CMD_WRITEFLASHPAGE 0x2E
- #define XMEGA_NVM_CMD_ERASEWRITEFLASH 0x2F
- #define XMEGA_NVM_CMD_FLASHCRC 0x78
- #define XMEGA_NVM_CMD_ERASEAPPSEC 0x20
- #define XMEGA_NVM_CMD_ERASEAPPSECPAGE 0x22
- #define XMEGA_NVM_CMD_WRITEAPPSECPAGE 0x24
- #define XMEGA_NVM_CMD_ERASEWRITEAPPSECPAGE 0x25
- #define XMEGA_NVM_CMD_APPCRC 0x38
- #define XMEGA_NVM_CMD_ERASEBOOTSEC 0x68
- #define XMEGA_NVM_CMD_ERASEBOOTSECPAGE 0x2A
- #define XMEGA_NVM_CMD_WRITEBOOTSECPAGE 0x2C
- #define XMEGA_NVM_CMD_ERASEWRITEBOOTSECPAGE 0x2D
- #define XMEGA_NVM_CMD_BOOTCRC 0x39
- #define XMEGA_NVM_CMD_READUSERSIG 0x03
- #define XMEGA_NVM_CMD_ERASEUSERSIG 0x18
- #define XMEGA_NVM_CMD_WRITEUSERSIG 0x1A
- #define XMEGA_NVM_CMD_READCALIBRATION 0x02
- #define XMEGA_NVM_CMD_READFUSE 0x07
- #define XMEGA_NVM_CMD_WRITEFUSE 0x4C
- #define XMEGA_NVM_CMD_WRITELOCK 0x08
- #define XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF 0x33
- #define XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF 0x36
- #define XMEGA_NVM_CMD_ERASEEEPROM 0x30
- #define XMEGA_NVM_CMD_ERASEEEPROMPAGE 0x32
- #define XMEGA_NVM_CMD_WRITEEEPROMPAGE 0x34
- #define XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE 0x35
- #define XMEGA_NVM_CMD_READEEPROM 0x06
-
- /* Function Prototypes: */
- bool XMEGANVM_WaitWhileNVMBusBusy(void);
- bool XMEGANVM_WaitWhileNVMControllerBusy(void);
- bool XMEGANVM_EnablePDI(void);
- void XMEGANVM_DisablePDI(void);
- bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand,
- uint32_t* const CRCDest);
- bool XMEGANVM_ReadMemory(const uint32_t ReadAddress,
- uint8_t* ReadBuffer,
- uint16_t ReadSize);
- bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand,
- const uint32_t WriteAddress,
- const uint8_t Byte);
- bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
- const uint8_t EraseBuffCommand,
- const uint8_t WritePageCommand,
- const uint8_t PageMode,
- const uint32_t WriteAddress,
- const uint8_t* WriteBuffer,
- uint16_t WriteSize);
- bool XMEGANVM_EraseMemory(const uint8_t EraseCommand,
- const uint32_t Address);
-
- #if defined(INCLUDE_FROM_XMEGANVM_C)
- static void XMEGANVM_SendNVMRegAddress(const uint8_t Register);
- static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);
- #endif
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
deleted file mode 100644
index aa5503f3f..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices.
- */
-
-#define INCLUDE_FROM_XPROGPROTOCOL_C
-#include "XPROGProtocol.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-/** Base absolute address for the target's NVM controller for PDI programming */
-uint32_t XPROG_Param_NVMBase = 0x010001C0;
-
-/** Size in bytes of the target's EEPROM page */
-uint16_t XPROG_Param_EEPageSize = 32;
-
-/** Address of the TPI device's NVMCMD register for TPI programming */
-uint8_t XPROG_Param_NVMCMDRegAddr = 0x33;
-
-/** Address of the TPI device's NVMCSR register for TPI programming */
-uint8_t XPROG_Param_NVMCSRRegAddr = 0x32;
-
-/** Currently selected XPROG programming protocol */
-uint8_t XPROG_SelectedProtocol = XPROG_PROTOCOL_PDI;
-
-/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
- * programming.
- */
-void XPROGProtocol_SetMode(void)
-{
- struct
- {
- uint8_t Protocol;
- } SetMode_XPROG_Params;
-
- Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
-
- Endpoint_Write_8(CMD_XPROG_SETMODE);
- Endpoint_Write_8((SetMode_XPROG_Params.Protocol != XPROG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
- Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
- * removed and processed so that the underlying XPROG command can be handled.
- */
-void XPROGProtocol_Command(void)
-{
- uint8_t XPROGCommand = Endpoint_Read_8();
-
- switch (XPROGCommand)
- {
- case XPROG_CMD_ENTER_PROGMODE:
- XPROGProtocol_EnterXPROGMode();
- break;
- case XPROG_CMD_LEAVE_PROGMODE:
- XPROGProtocol_LeaveXPROGMode();
- break;
- case XPROG_CMD_ERASE:
- XPROGProtocol_Erase();
- break;
- case XPROG_CMD_WRITE_MEM:
- XPROGProtocol_WriteMemory();
- break;
- case XPROG_CMD_READ_MEM:
- XPROGProtocol_ReadMemory();
- break;
- case XPROG_CMD_CRC:
- XPROGProtocol_ReadCRC();
- break;
- case XPROG_CMD_SET_PARAM:
- XPROGProtocol_SetParam();
- break;
- }
-}
-
-/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */
-static void XPROGProtocol_EnterXPROGMode(void)
-{
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- bool NVMBusEnabled = false;
-
- if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
- NVMBusEnabled = XMEGANVM_EnablePDI();
- else if (XPROG_SelectedProtocol == XPROG_PROTOCOL_TPI)
- NVMBusEnabled = TINYNVM_EnableTPI();
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_ENTER_PROGMODE);
- Endpoint_Write_8(NVMBusEnabled ? XPROG_ERR_OK : XPROG_ERR_FAILED);
- Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
- * the attached device.
- */
-static void XPROGProtocol_LeaveXPROGMode(void)
-{
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
- XMEGANVM_DisablePDI();
- else
- TINYNVM_DisableTPI();
-
- #if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL)
- /* If the XCK rescue clock option is enabled, we need to restart it once the
- * XPROG mode has been exited, since the XPROG protocol stops it after use. */
- ISPTarget_ConfigureRescueClock();
- #endif
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_LEAVE_PROGMODE);
- Endpoint_Write_8(XPROG_ERR_OK);
- Endpoint_ClearIN();
-}
-
-/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
-static void XPROGProtocol_Erase(void)
-{
- uint8_t ReturnStatus = XPROG_ERR_OK;
-
- struct
- {
- uint8_t MemoryType;
- uint32_t Address;
- } Erase_XPROG_Params;
-
- Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL);
- Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t EraseCommand;
-
- if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
- {
- /* Determine which NVM command to send to the device depending on the memory to erase */
- switch (Erase_XPROG_Params.MemoryType)
- {
- case XPROG_ERASE_CHIP:
- EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
- break;
- case XPROG_ERASE_APP:
- EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;
- break;
- case XPROG_ERASE_BOOT:
- EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;
- break;
- case XPROG_ERASE_EEPROM:
- EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;
- break;
- case XPROG_ERASE_APP_PAGE:
- EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;
- break;
- case XPROG_ERASE_BOOT_PAGE:
- EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;
- break;
- case XPROG_ERASE_EEPROM_PAGE:
- EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;
- break;
- case XPROG_ERASE_USERSIG:
- EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;
- break;
- default:
- EraseCommand = XMEGA_NVM_CMD_NOOP;
- break;
- }
-
- /* Erase the target memory, indicate timeout if occurred */
- if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
- else
- {
- if (Erase_XPROG_Params.MemoryType == XPROG_ERASE_CHIP)
- EraseCommand = TINY_NVM_CMD_CHIPERASE;
- else
- EraseCommand = TINY_NVM_CMD_SECTIONERASE;
-
- /* Erase the target memory, indicate timeout if occurred */
- if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_ERASE);
- Endpoint_Write_8(ReturnStatus);
- Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
-static void XPROGProtocol_WriteMemory(void)
-{
- uint8_t ReturnStatus = XPROG_ERR_OK;
-
- struct
- {
- uint8_t MemoryType;
- uint8_t PageMode;
- uint32_t Address;
- uint16_t Length;
- uint8_t ProgData[256];
- } WriteMemory_XPROG_Params;
-
- Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
- sizeof(WriteMemory_XPROG_Params).ProgData), NULL);
- WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
- WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length);
- Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL);
-
- // The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need
- // to catch this and discard it before continuing on with packet processing to prevent communication issues
- if (((sizeof(uint8_t) + sizeof(WriteMemory_XPROG_Params) - sizeof(WriteMemory_XPROG_Params.ProgData)) +
- WriteMemory_XPROG_Params.Length) % AVRISP_DATA_EPSIZE == 0)
- {
- Endpoint_ClearOUT();
- Endpoint_WaitUntilReady();
- }
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
- {
- /* Assume FLASH page programming by default, as it is the common case */
- uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE;
- uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
- uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
- bool PagedMemory = true;
-
- switch (WriteMemory_XPROG_Params.MemoryType)
- {
- case XPROG_MEM_TYPE_APPL:
- WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
- break;
- case XPROG_MEM_TYPE_BOOT:
- WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;
- break;
- case XPROG_MEM_TYPE_EEPROM:
- WriteCommand = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE;
- WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
- EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
- break;
- case XPROG_MEM_TYPE_USERSIG:
- WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG;
- break;
- case XPROG_MEM_TYPE_FUSE:
- WriteCommand = XMEGA_NVM_CMD_WRITEFUSE;
- PagedMemory = false;
- break;
- case XPROG_MEM_TYPE_LOCKBITS:
- WriteCommand = XMEGA_NVM_CMD_WRITELOCK;
- PagedMemory = false;
- break;
- }
-
- /* Send the appropriate memory write commands to the device, indicate timeout if occurred */
- if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
- WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
- WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) ||
- (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
- WriteMemory_XPROG_Params.ProgData[0]))))
- {
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
- }
- else
- {
- /* Send write command to the TPI device, indicate timeout if occurred */
- if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
- WriteMemory_XPROG_Params.Length)))
- {
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
- }
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_WRITE_MEM);
- Endpoint_Write_8(ReturnStatus);
- Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
- * attached device.
- */
-static void XPROGProtocol_ReadMemory(void)
-{
- uint8_t ReturnStatus = XPROG_ERR_OK;
-
- struct
- {
- uint8_t MemoryType;
- uint32_t Address;
- uint16_t Length;
- } ReadMemory_XPROG_Params;
-
- Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL);
- ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
- ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t ReadBuffer[256];
-
- if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
- {
- /* Read the PDI target's memory, indicate timeout if occurred */
- if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
- else
- {
- /* Read the TPI target's memory, indicate timeout if occurred */
- if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_READ_MEM);
- Endpoint_Write_8(ReturnStatus);
-
- if (ReturnStatus == XPROG_ERR_OK)
- Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NULL);
-
- Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
- * attached device's memory and a data set on the host.
- */
-static void XPROGProtocol_ReadCRC(void)
-{
- uint8_t ReturnStatus = XPROG_ERR_OK;
-
- struct
- {
- uint8_t CRCType;
- } ReadCRC_XPROG_Params;
-
- Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL);
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint32_t MemoryCRC;
-
- if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
- {
- uint8_t CRCCommand;
-
- /* Determine which NVM command to send to the device depending on the memory to CRC */
- switch (ReadCRC_XPROG_Params.CRCType)
- {
- case XPROG_CRC_APP:
- CRCCommand = XMEGA_NVM_CMD_APPCRC;
- break;
- case XPROG_CRC_BOOT:
- CRCCommand = XMEGA_NVM_CMD_BOOTCRC;
- break;
- default:
- CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
- break;
- }
-
- /* Perform and retrieve the memory CRC, indicate timeout if occurred */
- if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
- ReturnStatus = XPROG_ERR_TIMEOUT;
- }
- else
- {
- /* TPI does not support memory CRC */
- ReturnStatus = XPROG_ERR_FAILED;
- }
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_CRC);
- Endpoint_Write_8(ReturnStatus);
-
- if (ReturnStatus == XPROG_ERR_OK)
- {
- Endpoint_Write_8(MemoryCRC >> 16);
- Endpoint_Write_16_LE(MemoryCRC & 0xFFFF);
- }
-
- Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
- * attached device.
- */
-static void XPROGProtocol_SetParam(void)
-{
- uint8_t ReturnStatus = XPROG_ERR_OK;
-
- uint8_t XPROGParam = Endpoint_Read_8();
-
- /* Determine which parameter is being set, store the new parameter value */
- switch (XPROGParam)
- {
- case XPROG_PARAM_NVMBASE:
- XPROG_Param_NVMBase = Endpoint_Read_32_BE();
- break;
- case XPROG_PARAM_EEPPAGESIZE:
- XPROG_Param_EEPageSize = Endpoint_Read_16_BE();
- break;
- case XPROG_PARAM_NVMCMD_REG:
- XPROG_Param_NVMCMDRegAddr = Endpoint_Read_8();
- break;
- case XPROG_PARAM_NVMCSR_REG:
- XPROG_Param_NVMCSRRegAddr = Endpoint_Read_8();
- break;
- case XPROG_PARAM_UNKNOWN_1:
- /* TODO: Undocumented parameter added in AVRStudio 5.1, purpose unknown. Must ACK and discard or
- the communication with AVRStudio 5.1 will fail.
- */
- Endpoint_Discard_16();
- break;
- default:
- ReturnStatus = XPROG_ERR_FAILED;
- break;
- }
-
- Endpoint_ClearOUT();
- Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- Endpoint_Write_8(CMD_XPROG);
- Endpoint_Write_8(XPROG_CMD_SET_PARAM);
- Endpoint_Write_8(ReturnStatus);
- Endpoint_ClearIN();
-}
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
deleted file mode 100644
index e35a1e4a1..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for XPROGProtocol.c.
- */
-
-#ifndef _XPROG_PROTOCOL_
-#define _XPROG_PROTOCOL_
-
- /* Includes: */
- #include <avr/io.h>
- #include <util/delay.h>
- #include <stdio.h>
-
- #include <LUFA/Drivers/USB/USB.h>
-
- #include "../V2Protocol.h"
- #include "XMEGANVM.h"
- #include "TINYNVM.h"
- #include "Config/AppConfig.h"
-
- /* Preprocessor Checks: */
- #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- /* On the XPLAIN board, we only need PDI programming
- for the ATXMEGA128A1 - disable ISP to prevent hardware
- damage and force-enable XPROG.
- */
- #undef ENABLE_ISP_PROTOCOL
-
- #if !defined(ENABLE_XPROG_PROTOCOL)
- #define ENABLE_XPROG_PROTOCOL
- #endif
- #endif
-
- /* Macros: */
- #define XPROG_CMD_ENTER_PROGMODE 0x01
- #define XPROG_CMD_LEAVE_PROGMODE 0x02
- #define XPROG_CMD_ERASE 0x03
- #define XPROG_CMD_WRITE_MEM 0x04
- #define XPROG_CMD_READ_MEM 0x05
- #define XPROG_CMD_CRC 0x06
- #define XPROG_CMD_SET_PARAM 0x07
-
- #define XPROG_MEM_TYPE_APPL 1
- #define XPROG_MEM_TYPE_BOOT 2
- #define XPROG_MEM_TYPE_EEPROM 3
- #define XPROG_MEM_TYPE_FUSE 4
- #define XPROG_MEM_TYPE_LOCKBITS 5
- #define XPROG_MEM_TYPE_USERSIG 6
- #define XPROG_MEM_TYPE_FACTORY_CALIBRATION 7
-
- #define XPROG_ERASE_CHIP 1
- #define XPROG_ERASE_APP 2
- #define XPROG_ERASE_BOOT 3
- #define XPROG_ERASE_EEPROM 4
- #define XPROG_ERASE_APP_PAGE 5
- #define XPROG_ERASE_BOOT_PAGE 6
- #define XPROG_ERASE_EEPROM_PAGE 7
- #define XPROG_ERASE_USERSIG 8
-
- #define XPROG_MEM_WRITE_ERASE 0
- #define XPROG_MEM_WRITE_WRITE 1
-
- #define XPROG_CRC_APP 1
- #define XPROG_CRC_BOOT 2
- #define XPROG_CRC_FLASH 3
-
- #define XPROG_ERR_OK 0
- #define XPROG_ERR_FAILED 1
- #define XPROG_ERR_COLLISION 2
- #define XPROG_ERR_TIMEOUT 3
-
- #define XPROG_PARAM_NVMBASE 0x01
- #define XPROG_PARAM_EEPPAGESIZE 0x02
- #define XPROG_PARAM_NVMCMD_REG 0x03
- #define XPROG_PARAM_NVMCSR_REG 0x04
- #define XPROG_PARAM_UNKNOWN_1 0x05
-
- #define XPROG_PROTOCOL_PDI 0x00
- #define XPROG_PROTOCOL_JTAG 0x01
- #define XPROG_PROTOCOL_TPI 0x02
-
- #define XPROG_PAGEMODE_WRITE (1 << 1)
- #define XPROG_PAGEMODE_ERASE (1 << 0)
-
- /* External Variables: */
- extern uint32_t XPROG_Param_NVMBase;
- extern uint16_t XPROG_Param_EEPageSize;
- extern uint8_t XPROG_Param_NVMCSRRegAddr;
- extern uint8_t XPROG_Param_NVMCMDRegAddr;
-
- /* Function Prototypes: */
- void XPROGProtocol_SetMode(void);
- void XPROGProtocol_Command(void);
-
- #if (defined(INCLUDE_FROM_XPROGPROTOCOL_C) && defined(ENABLE_XPROG_PROTOCOL))
- static void XPROGProtocol_EnterXPROGMode(void);
- static void XPROGProtocol_LeaveXPROGMode(void);
- static void XPROGProtocol_SetParam(void);
- static void XPROGProtocol_Erase(void);
- static void XPROGProtocol_WriteMemory(void);
- static void XPROGProtocol_ReadMemory(void);
- static void XPROGProtocol_ReadCRC(void);
- #endif
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
deleted file mode 100644
index 0455329c3..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Target-related functions for the PDI Protocol decoder.
- */
-
-#define INCLUDE_FROM_XPROGTARGET_C
-#include "XPROGTarget.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Flag to indicate if the USART is currently in Tx or Rx mode. */
-bool IsSending;
-
-/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
-void XPROGTarget_EnableTargetPDI(void)
-{
- IsSending = false;
-
- /* Set Tx and XCK as outputs, Rx as input */
- DDRD |= (1 << 5) | (1 << 3);
- DDRD &= ~(1 << 2);
-
- /* Set DATA line high for at least 90ns to disable /RESET functionality */
- PORTD |= (1 << 3);
- _delay_us(100);
-
- /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
- UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
- UCSR1B = (1 << TXEN1);
- UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
- /* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
- XPROGTarget_SendIdle();
- XPROGTarget_SendIdle();
-}
-
-/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
-void XPROGTarget_EnableTargetTPI(void)
-{
- IsSending = false;
-
- /* Set /RESET line low for at least 400ns to enable TPI functionality */
- AUX_LINE_DDR |= AUX_LINE_MASK;
- AUX_LINE_PORT &= ~AUX_LINE_MASK;
- _delay_us(100);
-
- /* Set Tx and XCK as outputs, Rx as input */
- DDRD |= (1 << 5) | (1 << 3);
- DDRD &= ~(1 << 2);
-
- /* Set up the synchronous USART for TPI communications - 8 data bits, even parity, 2 stop bits */
- UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
- UCSR1B = (1 << TXEN1);
- UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
- /* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
- XPROGTarget_SendIdle();
- XPROGTarget_SendIdle();
-}
-
-/** Disables the target's PDI interface, exits programming mode and starts the target's application. */
-void XPROGTarget_DisableTargetPDI(void)
-{
- /* Switch to Rx mode to ensure that all pending transmissions are complete */
- if (IsSending)
- XPROGTarget_SetRxMode();
-
- /* Turn off receiver and transmitter of the USART, clear settings */
- UCSR1A = ((1 << TXC1) | (1 << RXC1));
- UCSR1B = 0;
- UCSR1C = 0;
-
- /* Tristate all pins */
- DDRD &= ~((1 << 5) | (1 << 3));
- PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-}
-
-/** Disables the target's TPI interface, exits programming mode and starts the target's application. */
-void XPROGTarget_DisableTargetTPI(void)
-{
- /* Switch to Rx mode to ensure that all pending transmissions are complete */
- if (IsSending)
- XPROGTarget_SetRxMode();
-
- /* Turn off receiver and transmitter of the USART, clear settings */
- UCSR1A |= (1 << TXC1) | (1 << RXC1);
- UCSR1B = 0;
- UCSR1C = 0;
-
- /* Set all USART lines as inputs, tristate */
- DDRD &= ~((1 << 5) | (1 << 3));
- PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-
- /* Tristate target /RESET line */
- AUX_LINE_DDR &= ~AUX_LINE_MASK;
- AUX_LINE_PORT &= ~AUX_LINE_MASK;
-}
-
-/** Sends a byte via the USART.
- *
- * \param[in] Byte Byte to send through the USART
- */
-void XPROGTarget_SendByte(const uint8_t Byte)
-{
- /* Switch to Tx mode if currently in Rx mode */
- if (!(IsSending))
- XPROGTarget_SetTxMode();
-
- /* Wait until there is space in the hardware Tx buffer before writing */
- while (!(UCSR1A & (1 << UDRE1)));
- UCSR1A |= (1 << TXC1);
- UDR1 = Byte;
-}
-
-/** Receives a byte via the hardware USART, blocking until data is received or timeout expired.
- *
- * \return Received byte from the USART
- */
-uint8_t XPROGTarget_ReceiveByte(void)
-{
- /* Switch to Rx mode if currently in Tx mode */
- if (IsSending)
- XPROGTarget_SetRxMode();
-
- /* Wait until a byte has been received before reading */
- while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
-
- return UDR1;
-}
-
-/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
-void XPROGTarget_SendIdle(void)
-{
- /* Switch to Tx mode if currently in Rx mode */
- if (!(IsSending))
- XPROGTarget_SetTxMode();
-
- /* Need to do nothing for a full frame to send an IDLE */
- for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
- {
- /* Wait for a full cycle of the clock */
- while (PIND & (1 << 5));
- while (!(PIND & (1 << 5)));
- while (PIND & (1 << 5));
- }
-}
-
-static void XPROGTarget_SetTxMode(void)
-{
- /* Wait for a full cycle of the clock */
- while (PIND & (1 << 5));
- while (!(PIND & (1 << 5)));
- while (PIND & (1 << 5));
-
- PORTD |= (1 << 3);
- DDRD |= (1 << 3);
-
- UCSR1B &= ~(1 << RXEN1);
- UCSR1B |= (1 << TXEN1);
-
- IsSending = true;
-}
-
-static void XPROGTarget_SetRxMode(void)
-{
- while (!(UCSR1A & (1 << TXC1)));
- UCSR1A |= (1 << TXC1);
-
- UCSR1B &= ~(1 << TXEN1);
- UCSR1B |= (1 << RXEN1);
-
- DDRD &= ~(1 << 3);
- PORTD &= ~(1 << 3);
-
- IsSending = false;
-}
-
-#endif
-
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
deleted file mode 100644
index 1341384f2..000000000
--- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2017.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaims all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for XPROGTarget.c.
- */
-
-#ifndef _XPROG_TARGET_
-#define _XPROG_TARGET_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <stdbool.h>
-
- #include <LUFA/Common/Common.h>
-
- #include "../V2Protocol.h"
- #include "XPROGProtocol.h"
- #include "Config/AppConfig.h"
-
- /* Preprocessor Checks: */
- #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #undef ENABLE_ISP_PROTOCOL
-
- #if !defined(ENABLE_XPROG_PROTOCOL)
- #define ENABLE_XPROG_PROTOCOL
- #endif
- #endif
-
- /** Serial carrier TPI/PDI speed in Hz, when hardware TPI/PDI mode is used. */
- #define XPROG_HARDWARE_SPEED 2000000
-
- /** Total number of bits in a single USART frame. */
- #define BITS_IN_USART_FRAME 12
-
- /** \name PDI Related Constants
- * @{
- */
- #define PDI_CMD_LDS(AddressSize, DataSize) (0x00 | ( AddressSize << 2) | DataSize)
- #define PDI_CMD_LD(PointerAccess, DataSize) (0x20 | (PointerAccess << 2) | DataSize)
- #define PDI_CMD_STS(AddressSize, DataSize) (0x40 | ( AddressSize << 2) | DataSize)
- #define PDI_CMD_ST(PointerAccess, DataSize) (0x60 | (PointerAccess << 2) | DataSize)
- #define PDI_CMD_LDCS(PDIReg) (0x80 | PDIReg)
- #define PDI_CMD_REPEAT(DataSize) (0xA0 | DataSize)
- #define PDI_CMD_STCS(PDIReg) (0xC0 | PDIReg)
- #define PDI_CMD_KEY 0xE0
-
- #define PDI_REG_STATUS 0
- #define PDI_REG_RESET 1
- #define PDI_REG_CTRL 2
-
- #define PDI_STATUS_NVM (1 << 1)
-
- #define PDI_RESET_KEY 0x59
- #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
-
- #define PDI_DATASIZE_1BYTE 0
- #define PDI_DATASIZE_2BYTES 1
- #define PDI_DATASIZE_3BYTES 2
- #define PDI_DATASIZE_4BYTES 3
-
- #define PDI_POINTER_INDIRECT 0
- #define PDI_POINTER_INDIRECT_PI 1
- #define PDI_POINTER_DIRECT 2
- /** @} */
-
- /** \name TPI Related Constants
- * @{
- */
- #define TPI_CMD_SLD(PointerAccess) (0x20 | PointerAccess)
- #define TPI_CMD_SST(PointerAccess) (0x60 | PointerAccess)
- #define TPI_CMD_SSTPR 0x68
- #define TPI_CMD_SIN(Address) (0x10 | ((Address & 0x30) << 1) | (Address & 0x0F))
- #define TPI_CMD_SOUT(Address) (0x90 | ((Address & 0x30) << 1) | (Address & 0x0F))
- #define TPI_CMD_SLDCS(TPIReg) (0x80 | TPIReg)
- #define TPI_CMD_SSTCS(TPIReg) (0xC0 | TPIReg)
- #define TPI_CMD_SKEY 0xE0
-
- #define TPI_REG_STATUS 0x00
- #define TPI_REG_CTRL 0x02
- #define TPI_REG_ID 0x0F
-
- #define TPI_STATUS_NVM (1 << 1)
-
- #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
-
- #define TPI_POINTER_INDIRECT 0
- #define TPI_POINTER_INDIRECT_PI 4
- /** @} */
-
- /* Function Prototypes: */
- void XPROGTarget_EnableTargetPDI(void);
- void XPROGTarget_EnableTargetTPI(void);
- void XPROGTarget_DisableTargetPDI(void);
- void XPROGTarget_DisableTargetTPI(void);
- void XPROGTarget_SendByte(const uint8_t Byte);
- uint8_t XPROGTarget_ReceiveByte(void);
- void XPROGTarget_SendIdle(void);
- bool XPROGTarget_WaitWhileNVMBusBusy(void);
-
- #if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL))
- static void XPROGTarget_SetTxMode(void);
- static void XPROGTarget_SetRxMode(void);
- #endif
-
-#endif
-