aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/USBtoSerial/USBtoSerial.txt')
-rw-r--r--lib/lufa/Projects/USBtoSerial/USBtoSerial.txt78
1 files changed, 78 insertions, 0 deletions
diff --git a/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt b/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
new file mode 100644
index 000000000..0620f9393
--- /dev/null
+++ b/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
@@ -0,0 +1,78 @@
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage USB to Serial Converter Project
+ *
+ * \section Sec_Compat Project Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this project.
+ *
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this project.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Communications Device Class (CDC)</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Abstract Control Model (ACM)</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF CDC Class Standard</td>
+ * </tr>
+ * <tr>
+ * <td><b>Supported USB Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * USB to Serial bridge project. This project allows a USB AVR to serve
+ * as a USB to USART bridge between a USB host and a device lacking a
+ * USB port. When programmed into a USB AVR, the AVR will enumerate as a
+ * virtual COM port.
+ *
+ * The AVR's hardware USART's settings will change to mirror as closely as
+ * possible the serial settings set on the host. However, due to hardware
+ * limitations, some options may not be supported (baud rates with unacceptable
+ * error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
+ * 1.5 stop bits, parity other than none, even or odd).
+ *
+ * After running this project for the first time on a new computer,
+ * you will need to supply the .INF file located in this project
+ * project's directory as the device's driver when running under
+ * Windows. This will enable Windows to use its inbuilt CDC drivers,
+ * negating the need for custom drivers for the device. Other
+ * Operating Systems should automatically use their own inbuilt
+ * CDC-ACM drivers.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td>
+ * None
+ * </td>
+ * </tr>
+ * </table>
+ */
+