aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/Webserver/Lib/uip/uip.h
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/Webserver/Lib/uip/uip.h')
-rw-r--r--lib/lufa/Projects/Webserver/Lib/uip/uip.h2130
1 files changed, 0 insertions, 2130 deletions
diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uip.h b/lib/lufa/Projects/Webserver/Lib/uip/uip.h
deleted file mode 100644
index 7b87a2c77..000000000
--- a/lib/lufa/Projects/Webserver/Lib/uip/uip.h
+++ /dev/null
@@ -1,2130 +0,0 @@
-
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \file
- * Header file for the uIP TCP/IP stack.
- * \author Adam Dunkels <adam@dunkels.com>
- * \author Julien Abeille <jabeille@cisco.com> (IPv6 related code)
- * \author Mathilde Durvy <mdurvy@cisco.com> (IPv6 related code)
- *
- * The uIP TCP/IP stack header file contains definitions for a number
- * of C macros that are used by uIP programs as well as internal uIP
- * structures, TCP/IP header structures and function declarations.
- *
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- * products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uip.h,v 1.24 2009/04/06 13:18:50 nvt-se Exp $
- *
- */
-
-#ifndef __UIP_H__
-#define __UIP_H__
-
-#include "uipopt.h"
-
-/**
- * Representation of an IP address.
- *
- */
-#if UIP_CONF_IPV6
-typedef union uip_ip6addr_t {
- u8_t u8[16]; /* Initialiser, must come first!!! */
- u16_t u16[8];
-} uip_ip6addr_t;
-
-typedef uip_ip6addr_t uip_ipaddr_t;
-#else /* UIP_CONF_IPV6 */
-typedef union uip_ip4addr_t {
- u8_t u8[4]; /* Initialiser, must come first!!! */
- u16_t u16[2];
-#if 0
- u32_t u32;
-#endif
-} uip_ip4addr_t;
-typedef uip_ip4addr_t uip_ipaddr_t;
-#endif /* UIP_CONF_IPV6 */
-
-
-/*---------------------------------------------------------------------------*/
-
-/** \brief 16 bit 802.15.4 address */
-struct uip_802154_shortaddr {
- u8_t addr[2];
-};
-/** \brief 64 bit 802.15.4 address */
-struct uip_802154_longaddr {
- u8_t addr[8];
-};
-
-/** \brief 802.11 address */
-struct uip_80211_addr {
- u8_t addr[6];
-};
-
-/** \brief 802.3 address */
-struct uip_eth_addr {
- u8_t addr[6];
-};
-
-#if UIP_CONF_LL_802154
-/** \brief 802.15.4 address */
-typedef struct uip_802154_longaddr uip_lladdr_t;
-#define UIP_802154_SHORTADDR_LEN 2
-#define UIP_802154_LONGADDR_LEN 8
-#define UIP_LLADDR_LEN UIP_802154_LONGADDR_LEN
-#else /*UIP_CONF_LL_802154*/
-#if UIP_CONF_LL_80211
-/** \brief 802.11 address */
-typedef struct uip_80211_addr uip_lladdr_t;
-#define UIP_LLADDR_LEN 6
-#else /*UIP_CONF_LL_80211*/
-/** \brief Ethernet address */
-typedef struct uip_eth_addr uip_lladdr_t;
-#define UIP_LLADDR_LEN 6
-#endif /*UIP_CONF_LL_80211*/
-#endif /*UIP_CONF_LL_802154*/
-
-/*---------------------------------------------------------------------------*/
-/* First, the functions that should be called from the
- * system. Initialization, the periodic timer, and incoming packets are
- * handled by the following three functions.
- */
-/**
- * \defgroup uipconffunc uIP configuration functions
- * @{
- *
- * The uIP configuration functions are used for setting run-time
- * parameters in uIP such as IP addresses.
- */
-
-/**
- * Set the IP address of this host.
- *
- * The IP address is represented as a 4-byte array where the first
- * octet of the IP address is put in the first member of the 4-byte
- * array.
- *
- * Example:
- \code
-
- uip_ipaddr_t addr;
-
- uip_ipaddr(&addr, 192,168,1,2);
- uip_sethostaddr(&addr);
-
- \endcode
- * \param addr A pointer to an IP address of type uip_ipaddr_t;
- *
- * \sa uip_ipaddr()
- *
- * \hideinitializer
- */
-#define uip_sethostaddr(addr) uip_ipaddr_copy(&uip_hostaddr, (addr))
-
-/**
- * Get the IP address of this host.
- *
- * The IP address is represented as a 4-byte array where the first
- * octet of the IP address is put in the first member of the 4-byte
- * array.
- *
- * Example:
- \code
- uip_ipaddr_t hostaddr;
-
- uip_gethostaddr(&hostaddr);
- \endcode
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the currently configured IP address.
- *
- * \hideinitializer
- */
-#define uip_gethostaddr(addr) uip_ipaddr_copy((addr), &uip_hostaddr)
-
-/**
- * Set the default router's IP address.
- *
- * \param addr A pointer to a uip_ipaddr_t variable containing the IP
- * address of the default router.
- *
- * \sa uip_ipaddr()
- *
- * \hideinitializer
- */
-#define uip_setdraddr(addr) uip_ipaddr_copy(&uip_draddr, (addr))
-
-/**
- * Set the netmask.
- *
- * \param addr A pointer to a uip_ipaddr_t variable containing the IP
- * address of the netmask.
- *
- * \sa uip_ipaddr()
- *
- * \hideinitializer
- */
-#define uip_setnetmask(addr) uip_ipaddr_copy(&uip_netmask, (addr))
-
-
-/**
- * Get the default router's IP address.
- *
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the IP address of the default router.
- *
- * \hideinitializer
- */
-#define uip_getdraddr(addr) uip_ipaddr_copy((addr), &uip_draddr)
-
-/**
- * Get the netmask.
- *
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the value of the netmask.
- *
- * \hideinitializer
- */
-#define uip_getnetmask(addr) uip_ipaddr_copy((addr), &uip_netmask)
-
-/** @} */
-
-/**
- * \defgroup uipinit uIP initialization functions
- * @{
- *
- * The uIP initialization functions are used for booting uIP.
- */
-
-/**
- * uIP initialization function.
- *
- * This function should be called at boot up to initialize the uIP
- * TCP/IP stack.
- */
-void uip_init(void);
-
-/**
- * uIP initialization function.
- *
- * This function may be used at boot time to set the initial ip_id.
- */
-void uip_setipid(u16_t id);
-
-/** @} */
-
-/**
- * \defgroup uipdevfunc uIP device driver functions
- * @{
- *
- * These functions are used by a network device driver for interacting
- * with uIP.
- */
-
-/**
- * Process an incoming packet.
- *
- * This function should be called when the device driver has received
- * a packet from the network. The packet from the device driver must
- * be present in the uip_buf buffer, and the length of the packet
- * should be placed in the uip_len variable.
- *
- * When the function returns, there may be an outbound packet placed
- * in the uip_buf packet buffer. If so, the uip_len variable is set to
- * the length of the packet. If no packet is to be sent out, the
- * uip_len variable is set to 0.
- *
- * The usual way of calling the function is presented by the source
- * code below.
- \code
- uip_len = devicedriver_poll();
- if(uip_len > 0) {
- uip_input();
- if(uip_len > 0) {
- devicedriver_send();
- }
- }
- \endcode
- *
- * \note If you are writing a uIP device driver that needs ARP
- * (Address Resolution Protocol), e.g., when running uIP over
- * Ethernet, you will need to call the uIP ARP code before calling
- * this function:
- \code
- #define BUF ((struct uip_eth_hdr *)&uip_buf[0])
- uip_len = ethernet_devicedrver_poll();
- if(uip_len > 0) {
- if(BUF->type == HTONS(UIP_ETHTYPE_IP)) {
- uip_arp_ipin();
- uip_input();
- if(uip_len > 0) {
- uip_arp_out();
- ethernet_devicedriver_send();
- }
- } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) {
- uip_arp_arpin();
- if(uip_len > 0) {
- ethernet_devicedriver_send();
- }
- }
- \endcode
- *
- * \hideinitializer
- */
-#define uip_input() uip_process(UIP_DATA)
-
-
-/**
- * Periodic processing for a connection identified by its number.
- *
- * This function does the necessary periodic processing (timers,
- * polling) for a uIP TCP connection, and should be called when the
- * periodic uIP timer goes off. It should be called for every
- * connection, regardless of whether they are open of closed.
- *
- * When the function returns, it may have an outbound packet waiting
- * for service in the uIP packet buffer, and if so the uip_len
- * variable is set to a value larger than zero. The device driver
- * should be called to send out the packet.
- *
- * The usual way of calling the function is through a for() loop like
- * this:
- \code
- for(i = 0; i < UIP_CONNS; ++i) {
- uip_periodic(i);
- if(uip_len > 0) {
- devicedriver_send();
- }
- }
- \endcode
- *
- * \note If you are writing a uIP device driver that needs ARP
- * (Address Resolution Protocol), e.g., when running uIP over
- * Ethernet, you will need to call the uip_arp_out() function before
- * calling the device driver:
- \code
- for(i = 0; i < UIP_CONNS; ++i) {
- uip_periodic(i);
- if(uip_len > 0) {
- uip_arp_out();
- ethernet_devicedriver_send();
- }
- }
- \endcode
- *
- * \param conn The number of the connection which is to be periodically polled.
- *
- * \hideinitializer
- */
-#if UIP_TCP
-#define uip_periodic(conn) do { uip_conn = &uip_conns[conn]; \
- uip_process(UIP_TIMER); } while (0)
-
-/**
- *
- *
- */
-#define uip_conn_active(conn) (uip_conns[conn].tcpstateflags != UIP_CLOSED)
-
-/**
- * Perform periodic processing for a connection identified by a pointer
- * to its structure.
- *
- * Same as uip_periodic() but takes a pointer to the actual uip_conn
- * struct instead of an integer as its argument. This function can be
- * used to force periodic processing of a specific connection.
- *
- * \param conn A pointer to the uip_conn struct for the connection to
- * be processed.
- *
- * \hideinitializer
- */
-#define uip_periodic_conn(conn) do { uip_conn = conn; \
- uip_process(UIP_TIMER); } while (0)
-
-/**
- * Request that a particular connection should be polled.
- *
- * Similar to uip_periodic_conn() but does not perform any timer
- * processing. The application is polled for new data.
- *
- * \param conn A pointer to the uip_conn struct for the connection to
- * be processed.
- *
- * \hideinitializer
- */
-#define uip_poll_conn(conn) do { uip_conn = conn; \
- uip_process(UIP_POLL_REQUEST); } while (0)
-
-#endif /* UIP_TCP */
-
-#if UIP_UDP
-/**
- * Periodic processing for a UDP connection identified by its number.
- *
- * This function is essentially the same as uip_periodic(), but for
- * UDP connections. It is called in a similar fashion as the
- * uip_periodic() function:
- \code
- for(i = 0; i < UIP_UDP_CONNS; i++) {
- uip_udp_periodic(i);
- if(uip_len > 0) {
- devicedriver_send();
- }
- }
- \endcode
- *
- * \note As for the uip_periodic() function, special care has to be
- * taken when using uIP together with ARP and Ethernet:
- \code
- for(i = 0; i < UIP_UDP_CONNS; i++) {
- uip_udp_periodic(i);
- if(uip_len > 0) {
- uip_arp_out();
- ethernet_devicedriver_send();
- }
- }
- \endcode
- *
- * \param conn The number of the UDP connection to be processed.
- *
- * \hideinitializer
- */
-#define uip_udp_periodic(conn) do { uip_udp_conn = &uip_udp_conns[conn]; \
- uip_process(UIP_UDP_TIMER); } while(0)
-
-/**
- * Periodic processing for a UDP connection identified by a pointer to
- * its structure.
- *
- * Same as uip_udp_periodic() but takes a pointer to the actual
- * uip_conn struct instead of an integer as its argument. This
- * function can be used to force periodic processing of a specific
- * connection.
- *
- * \param conn A pointer to the uip_udp_conn struct for the connection
- * to be processed.
- *
- * \hideinitializer
- */
-#define uip_udp_periodic_conn(conn) do { uip_udp_conn = conn; \
- uip_process(UIP_UDP_TIMER); } while(0)
-#endif /* UIP_UDP */
-
-/** \brief Abandon the reassembly of the current packet */
-void uip_reass_over(void);
-
-/**
- * The uIP packet buffer.
- *
- * The uip_buf array is used to hold incoming and outgoing
- * packets. The device driver should place incoming data into this
- * buffer. When sending data, the device driver should read the link
- * level headers and the TCP/IP headers from this buffer. The size of
- * the link level headers is configured by the UIP_LLH_LEN define.
- *
- * \note The application data need not be placed in this buffer, so
- * the device driver must read it from the place pointed to by the
- * uip_appdata pointer as illustrated by the following example:
- \code
- void
- devicedriver_send(void)
- {
- hwsend(&uip_buf[0], UIP_LLH_LEN);
- if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) {
- hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN);
- } else {
- hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN);
- hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN);
- }
- }
- \endcode
-*/
-extern u8_t uip_buf[UIP_BUFSIZE+2];
-
-
-
-/** @} */
-
-/*---------------------------------------------------------------------------*/
-/* Functions that are used by the uIP application program. Opening and
- * closing connections, sending and receiving data, etc. is all
- * handled by the functions below.
- */
-/**
- * \defgroup uipappfunc uIP application functions
- * @{
- *
- * Functions used by an application running of top of uIP.
- */
-
-/**
- * Start listening to the specified port.
- *
- * \note Since this function expects the port number in network byte
- * order, a conversion using HTONS() or htons() is necessary.
- *
- \code
- uip_listen(HTONS(80));
- \endcode
- *
- * \param port A 16-bit port number in network byte order.
- */
-void uip_listen(u16_t port);
-
-/**
- * Stop listening to the specified port.
- *
- * \note Since this function expects the port number in network byte
- * order, a conversion using HTONS() or htons() is necessary.
- *
- \code
- uip_unlisten(HTONS(80));
- \endcode
- *
- * \param port A 16-bit port number in network byte order.
- */
-void uip_unlisten(u16_t port);
-
-/**
- * Connect to a remote host using TCP.
- *
- * This function is used to start a new connection to the specified
- * port on the specified host. It allocates a new connection identifier,
- * sets the connection to the SYN_SENT state and sets the
- * retransmission timer to 0. This will cause a TCP SYN segment to be
- * sent out the next time this connection is periodically processed,
- * which usually is done within 0.5 seconds after the call to
- * uip_connect().
- *
- * \note This function is available only if support for active open
- * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h.
- *
- * \note Since this function requires the port number to be in network
- * byte order, a conversion using HTONS() or htons() is necessary.
- *
- \code
- uip_ipaddr_t ipaddr;
-
- uip_ipaddr(&ipaddr, 192,168,1,2);
- uip_connect(&ipaddr, HTONS(80));
- \endcode
- *
- * \param ripaddr The IP address of the remote host.
- *
- * \param port A 16-bit port number in network byte order.
- *
- * \return A pointer to the uIP connection identifier for the new connection,
- * or NULL if no connection could be allocated.
- *
- */
-struct uip_conn *uip_connect(uip_ipaddr_t *ripaddr, u16_t port);
-
-
-
-/**
- * \internal
- *
- * Check if a connection has outstanding (i.e., unacknowledged) data.
- *
- * \param conn A pointer to the uip_conn structure for the connection.
- *
- * \hideinitializer
- */
-#define uip_outstanding(conn) ((conn)->len)
-
-/**
- * Send data on the current connection.
- *
- * This function is used to send out a single segment of TCP
- * data. Only applications that have been invoked by uIP for event
- * processing can send data.
- *
- * The amount of data that actually is sent out after a call to this
- * function is determined by the maximum amount of data TCP allows. uIP
- * will automatically crop the data so that only the appropriate
- * amount of data is sent. The function uip_mss() can be used to query
- * uIP for the amount of data that actually will be sent.
- *
- * \note This function does not guarantee that the sent data will
- * arrive at the destination. If the data is lost in the network, the
- * application will be invoked with the uip_rexmit() event being
- * set. The application will then have to resend the data using this
- * function.
- *
- * \param data A pointer to the data which is to be sent.
- *
- * \param len The maximum amount of data bytes to be sent.
- *
- * \hideinitializer
- */
-void uip_send(const void *data, int len);
-
-/**
- * The length of any incoming data that is currently available (if available)
- * in the uip_appdata buffer.
- *
- * The test function uip_data() must first be used to check if there
- * is any data available at all.
- *
- * \hideinitializer
- */
-/*void uip_datalen(void);*/
-#define uip_datalen() uip_len
-
-/**
- * The length of any out-of-band data (urgent data) that has arrived
- * on the connection.
- *
- * \note The configuration parameter UIP_URGDATA must be set for this
- * function to be enabled.
- *
- * \hideinitializer
- */
-#define uip_urgdatalen() uip_urglen
-
-/**
- * Close the current connection.
- *
- * This function will close the current connection in a nice way.
- *
- * \hideinitializer
- */
-#define uip_close() (uip_flags = UIP_CLOSE)
-
-/**
- * Abort the current connection.
- *
- * This function will abort (reset) the current connection, and is
- * usually used when an error has occurred that prevents using the
- * uip_close() function.
- *
- * \hideinitializer
- */
-#define uip_abort() (uip_flags = UIP_ABORT)
-
-/**
- * Tell the sending host to stop sending data.
- *
- * This function will close our receiver's window so that we stop
- * receiving data for the current connection.
- *
- * \hideinitializer
- */
-#define uip_stop() (uip_conn->tcpstateflags |= UIP_STOPPED)
-
-/**
- * Find out if the current connection has been previously stopped with
- * uip_stop().
- *
- * \hideinitializer
- */
-#define uip_stopped(conn) ((conn)->tcpstateflags & UIP_STOPPED)
-
-/**
- * Restart the current connection, if is has previously been stopped
- * with uip_stop().
- *
- * This function will open the receiver's window again so that we
- * start receiving data for the current connection.
- *
- * \hideinitializer
- */
-#define uip_restart() do { uip_flags |= UIP_NEWDATA; \
- uip_conn->tcpstateflags &= ~UIP_STOPPED; \
- } while(0)
-
-
-/* uIP tests that can be made to determine in what state the current
- connection is, and what the application function should do. */
-
-/**
- * Is the current connection a UDP connection?
- *
- * This function checks whether the current connection is a UDP connection.
- *
- * \hideinitializer
- *
- */
-#define uip_udpconnection() (uip_conn == NULL)
-
-/**
- * Is new incoming data available?
- *
- * Will reduce to non-zero if there is new data for the application
- * present at the uip_appdata pointer. The size of the data is
- * available through the uip_len variable.
- *
- * \hideinitializer
- */
-#define uip_newdata() (uip_flags & UIP_NEWDATA)
-
-/**
- * Has previously sent data been acknowledged?
- *
- * Will reduce to non-zero if the previously sent data has been
- * acknowledged by the remote host. This means that the application
- * can send new data.
- *
- * \hideinitializer
- */
-#define uip_acked() (uip_flags & UIP_ACKDATA)
-
-/**
- * Has the connection just been connected?
- *
- * Reduces to non-zero if the current connection has been connected to
- * a remote host. This will happen both if the connection has been
- * actively opened (with uip_connect()) or passively opened (with
- * uip_listen()).
- *
- * \hideinitializer
- */
-#define uip_connected() (uip_flags & UIP_CONNECTED)
-
-/**
- * Has the connection been closed by the other end?
- *
- * Is non-zero if the connection has been closed by the remote
- * host. The application may then do the necessary clean-ups.
- *
- * \hideinitializer
- */
-#define uip_closed() (uip_flags & UIP_CLOSE)
-
-/**
- * Has the connection been aborted by the other end?
- *
- * Non-zero if the current connection has been aborted (reset) by the
- * remote host.
- *
- * \hideinitializer
- */
-#define uip_aborted() (uip_flags & UIP_ABORT)
-
-/**
- * Has the connection timed out?
- *
- * Non-zero if the current connection has been aborted due to too many
- * retransmissions.
- *
- * \hideinitializer
- */
-#define uip_timedout() (uip_flags & UIP_TIMEDOUT)
-
-/**
- * Do we need to retransmit previously data?
- *
- * Reduces to non-zero if the previously sent data has been lost in
- * the network, and the application should retransmit it. The
- * application should send the exact same data as it did the last
- * time, using the uip_send() function.
- *
- * \hideinitializer
- */
-#define uip_rexmit() (uip_flags & UIP_REXMIT)
-
-/**
- * Is the connection being polled by uIP?
- *
- * Is non-zero if the reason the application is invoked is that the
- * current connection has been idle for a while and should be
- * polled.
- *
- * The polling event can be used for sending data without having to
- * wait for the remote host to send data.
- *
- * \hideinitializer
- */
-#define uip_poll() (uip_flags & UIP_POLL)
-
-/**
- * Get the initial maximum segment size (MSS) of the current
- * connection.
- *
- * \hideinitializer
- */
-#define uip_initialmss() (uip_conn->initialmss)
-
-/**
- * Get the current maximum segment size that can be sent on the current
- * connection.
- *
- * The current maximum segment size that can be sent on the
- * connection is computed from the receiver's window and the MSS of
- * the connection (which also is available by calling
- * uip_initialmss()).
- *
- * \hideinitializer
- */
-#define uip_mss() (uip_conn->mss)
-
-/**
- * Set up a new UDP connection.
- *
- * This function sets up a new UDP connection. The function will
- * automatically allocate an unused local port for the new
- * connection. However, another port can be chosen by using the
- * uip_udp_bind() call, after the uip_udp_new() function has been
- * called.
- *
- * Example:
- \code
- uip_ipaddr_t addr;
- struct uip_udp_conn *c;
-
- uip_ipaddr(&addr, 192,168,2,1);
- c = uip_udp_new(&addr, HTONS(12345));
- if(c != NULL) {
- uip_udp_bind(c, HTONS(12344));
- }
- \endcode
- * \param ripaddr The IP address of the remote host.
- *
- * \param rport The remote port number in network byte order.
- *
- * \return The uip_udp_conn structure for the new connection or NULL
- * if no connection could be allocated.
- */
-struct uip_udp_conn *uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport);
-
-/**
- * Removed a UDP connection.
- *
- * \param conn A pointer to the uip_udp_conn structure for the connection.
- *
- * \hideinitializer
- */
-#define uip_udp_remove(conn) (conn)->lport = 0
-
-/**
- * Bind a UDP connection to a local port.
- *
- * \param conn A pointer to the uip_udp_conn structure for the
- * connection.
- *
- * \param port The local port number, in network byte order.
- *
- * \hideinitializer
- */
-#define uip_udp_bind(conn, port) (conn)->lport = port
-
-/**
- * Send a UDP datagram of length len on the current connection.
- *
- * This function can only be called in response to a UDP event (poll
- * or newdata). The data must be present in the uip_buf buffer, at the
- * place pointed to by the uip_appdata pointer.
- *
- * \param len The length of the data in the uip_buf buffer.
- *
- * \hideinitializer
- */
-#define uip_udp_send(len) uip_send((char *)uip_appdata, len)
-
-/** @} */
-
-/* uIP convenience and converting functions. */
-
-/**
- * \defgroup uipconvfunc uIP conversion functions
- * @{
- *
- * These functions can be used for converting between different data
- * formats used by uIP.
- */
-
-/**
- * Convert an IP address to four bytes separated by commas.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- printf("ipaddr=%d.%d.%d.%d\n", uip_ipaddr_to_quad(&ipaddr));
- \endcode
- *
- * \param a A pointer to a uip_ipaddr_t.
- * \hideinitializer
- */
-#define uip_ipaddr_to_quad(a) (a)->u8[0],(a)->u8[1],(a)->u8[2],(a)->u8[3]
-
-/**
- * Construct an IP address from four bytes.
- *
- * This function constructs an IP address of the type that uIP handles
- * internally from four bytes. The function is handy for specifying IP
- * addresses to use with e.g. the uip_connect() function.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- struct uip_conn *c;
-
- uip_ipaddr(&ipaddr, 192,168,1,2);
- c = uip_connect(&ipaddr, HTONS(80));
- \endcode
- *
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the IP address.
- *
- * \param addr0 The first octet of the IP address.
- * \param addr1 The second octet of the IP address.
- * \param addr2 The third octet of the IP address.
- * \param addr3 The forth octet of the IP address.
- *
- * \hideinitializer
- */
-#define uip_ipaddr(addr, addr0,addr1,addr2,addr3) do { \
- (addr)->u8[0] = addr0; \
- (addr)->u8[1] = addr1; \
- (addr)->u8[2] = addr2; \
- (addr)->u8[3] = addr3; \
- } while(0)
-
-/**
- * Construct an IPv6 address from eight 16-bit words.
- *
- * This function constructs an IPv6 address.
- *
- * \hideinitializer
- */
-#define uip_ip6addr(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7) do { \
- (addr)->u16[0] = HTONS(addr0); \
- (addr)->u16[1] = HTONS(addr1); \
- (addr)->u16[2] = HTONS(addr2); \
- (addr)->u16[3] = HTONS(addr3); \
- (addr)->u16[4] = HTONS(addr4); \
- (addr)->u16[5] = HTONS(addr5); \
- (addr)->u16[6] = HTONS(addr6); \
- (addr)->u16[7] = HTONS(addr7); \
- } while(0)
-
-/**
- * Construct an IPv6 address from sixteen 8-bit words.
- *
- * This function constructs an IPv6 address.
- *
- * \hideinitializer
- */
-#define uip_ip6addr_u8(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7,addr8,addr9,addr10,addr11,addr12,addr13,addr14,addr15) do { \
- (addr)->u8[0] = addr0; \
- (addr)->u8[1] = addr1; \
- (addr)->u8[2] = addr2; \
- (addr)->u8[3] = addr3; \
- (addr)->u8[4] = addr4; \
- (addr)->u8[5] = addr5; \
- (addr)->u8[6] = addr6; \
- (addr)->u8[7] = addr7; \
- (addr)->u8[8] = addr8; \
- (addr)->u8[9] = addr9; \
- (addr)->u8[10] = addr10; \
- (addr)->u8[11] = addr11; \
- (addr)->u8[12] = addr12; \
- (addr)->u8[13] = addr13; \
- (addr)->u8[14] = addr14; \
- (addr)->u8[15] = addr15; \
- } while(0)
-
-
-/**
- * Copy an IP address to another IP address.
- *
- * Copies an IP address from one place to another.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2;
-
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- uip_ipaddr_copy(&ipaddr2, &ipaddr1);
- \endcode
- *
- * \param dest The destination for the copy.
- * \param src The source from where to copy.
- *
- * \hideinitializer
- */
-#ifndef uip_ipaddr_copy
-#define uip_ipaddr_copy(dest, src) (*(dest) = *(src))
-#endif
-
-/**
- * Compare two IP addresses
- *
- * Compares two IP addresses.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2;
-
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) {
- printf("They are the same");
- }
- \endcode
- *
- * \param addr1 The first IP address.
- * \param addr2 The second IP address.
- *
- * \hideinitializer
- */
-#if !UIP_CONF_IPV6
-#define uip_ipaddr_cmp(addr1, addr2) ((addr1)->u16[0] == (addr2)->u16[0] && \
- (addr1)->u16[1] == (addr2)->u16[1])
-#else /* !UIP_CONF_IPV6 */
-#define uip_ipaddr_cmp(addr1, addr2) (memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0)
-#endif /* !UIP_CONF_IPV6 */
-
-/**
- * Compare two IP addresses with netmasks
- *
- * Compares two IP addresses with netmasks. The masks are used to mask
- * out the bits that are to be compared.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2, mask;
-
- uip_ipaddr(&mask, 255,255,255,0);
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- uip_ipaddr(&ipaddr2, 192,16,1,3);
- if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) {
- printf("They are the same");
- }
- \endcode
- *
- * \param addr1 The first IP address.
- * \param addr2 The second IP address.
- * \param mask The netmask.
- *
- * \hideinitializer
- */
-#if !UIP_CONF_IPV6
-#define uip_ipaddr_maskcmp(addr1, addr2, mask) \
- (((((u16_t *)addr1)[0] & ((u16_t *)mask)[0]) == \
- (((u16_t *)addr2)[0] & ((u16_t *)mask)[0])) && \
- ((((u16_t *)addr1)[1] & ((u16_t *)mask)[1]) == \
- (((u16_t *)addr2)[1] & ((u16_t *)mask)[1])))
-#else
-#define uip_ipaddr_prefixcmp(addr1, addr2, length) (memcmp(addr1, addr2, length>>3) == 0)
-#endif
-
-
-/**
- * Check if an address is a broadcast address for a network.
- *
- * Checks if an address is the broadcast address for a network. The
- * network is defined by an IP address that is on the network and the
- * network's netmask.
- *
- * \param addr The IP address.
- * \param netaddr The network's IP address.
- * \param netmask The network's netmask.
- *
- * \hideinitializer
- */
-/*#define uip_ipaddr_isbroadcast(addr, netaddr, netmask)
- ((uip_ipaddr_t *)(addr)).u16 & ((uip_ipaddr_t *)(addr)).u16*/
-
-
-
-/**
- * Mask out the network part of an IP address.
- *
- * Masks out the network part of an IP address, given the address and
- * the netmask.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2, netmask;
-
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- uip_ipaddr(&netmask, 255,255,255,0);
- uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask);
- \endcode
- *
- * In the example above, the variable "ipaddr2" will contain the IP
- * address 192.168.1.0.
- *
- * \param dest Where the result is to be placed.
- * \param src The IP address.
- * \param mask The netmask.
- *
- * \hideinitializer
- */
-#define uip_ipaddr_mask(dest, src, mask) do { \
- ((u16_t *)dest)[0] = ((u16_t *)src)[0] & ((u16_t *)mask)[0]; \
- ((u16_t *)dest)[1] = ((u16_t *)src)[1] & ((u16_t *)mask)[1]; \
- } while(0)
-
-/**
- * Pick the first octet of an IP address.
- *
- * Picks out the first octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr1(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 1.
- *
- * \hideinitializer
- */
-#define uip_ipaddr1(addr) ((addr)->u8[0])
-
-/**
- * Pick the second octet of an IP address.
- *
- * Picks out the second octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr2(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 2.
- *
- * \hideinitializer
- */
-#define uip_ipaddr2(addr) ((addr)->u8[1])
-
-/**
- * Pick the third octet of an IP address.
- *
- * Picks out the third octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr3(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 3.
- *
- * \hideinitializer
- */
-#define uip_ipaddr3(addr) ((addr)->u8[2])
-
-/**
- * Pick the fourth octet of an IP address.
- *
- * Picks out the fourth octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr4(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 4.
- *
- * \hideinitializer
- */
-#define uip_ipaddr4(addr) ((addr)->u8[3])
-
-/**
- * Convert 16-bit quantity from host byte order to network byte order.
- *
- * This macro is primarily used for converting constants from host
- * byte order to network byte order. For converting variables to
- * network byte order, use the htons() function instead.
- *
- * \hideinitializer
- */
-#ifndef HTONS
-# if UIP_BYTE_ORDER == UIP_BIG_ENDIAN
-# define HTONS(n) (n)
-# define HTONL(n) (n)
-# else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
-# define HTONS(n) (u16_t)((((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8))
-# define HTONL(n) (((u32_t)HTONS(n) << 16) | HTONS((u32_t)(n) >> 16))
-# endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
-#else
-#error "HTONS already defined!"
-#endif /* HTONS */
-
-/**
- * Convert 16-bit quantity from host byte order to network byte order.
- *
- * This function is primarily used for converting variables from host
- * byte order to network byte order. For converting constants to
- * network byte order, use the HTONS() macro instead.
- */
-#ifndef htons
-u16_t htons(u16_t val);
-#endif /* htons */
-#ifndef ntohs
-#define ntohs htons
-#endif
-
-#ifndef htonl
-u32_t htonl(u32_t val);
-#endif /* htonl */
-#ifndef ntohl
-#define ntohl htonl
-#endif
-
-/** @} */
-
-/**
- * Pointer to the application data in the packet buffer.
- *
- * This pointer points to the application data when the application is
- * called. If the application wishes to send data, the application may
- * use this space to write the data into before calling uip_send().
- */
-extern void *uip_appdata;
-
-#if UIP_URGDATA > 0
-/* u8_t *uip_urgdata:
- *
- * This pointer points to any urgent data that has been received. Only
- * present if compiled with support for urgent data (UIP_URGDATA).
- */
-extern void *uip_urgdata;
-#endif /* UIP_URGDATA > 0 */
-
-
-/**
- * \defgroup uipdrivervars Variables used in uIP device drivers
- * @{
- *
- * uIP has a few global variables that are used in device drivers for
- * uIP.
- */
-
-/**
- * The length of the packet in the uip_buf buffer.
- *
- * The global variable uip_len holds the length of the packet in the
- * uip_buf buffer.
- *
- * When the network device driver calls the uIP input function,
- * uip_len should be set to the length of the packet in the uip_buf
- * buffer.
- *
- * When sending packets, the device driver should use the contents of
- * the uip_len variable to determine the length of the outgoing
- * packet.
- *
- */
-extern u16_t uip_len;
-
-/**
- * The length of the extension headers
- */
-extern u8_t uip_ext_len;
-/** @} */
-
-#if UIP_URGDATA > 0
-extern u16_t uip_urglen, uip_surglen;
-#endif /* UIP_URGDATA > 0 */
-
-
-/**
- * Representation of a uIP TCP connection.
- *
- * The uip_conn structure is used for identifying a connection. All
- * but one field in the structure are to be considered read-only by an
- * application. The only exception is the appstate field whose purpose
- * is to let the application store application-specific state (e.g.,
- * file pointers) for the connection. The type of this field is
- * configured in the "uipopt.h" header file.
- */
-struct uip_conn {
- uip_ipaddr_t ripaddr; /**< The IP address of the remote host. */
-
- u16_t lport; /**< The local TCP port, in network byte order. */
- u16_t rport; /**< The local remote TCP port, in network byte
- order. */
-
- u8_t rcv_nxt[4]; /**< The sequence number that we expect to
- receive next. */
- u8_t snd_nxt[4]; /**< The sequence number that was last sent by
- us. */
- u16_t len; /**< Length of the data that was previously sent. */
- u16_t mss; /**< Current maximum segment size for the
- connection. */
- u16_t initialmss; /**< Initial maximum segment size for the
- connection. */
- u8_t sa; /**< Retransmission time-out calculation state
- variable. */
- u8_t sv; /**< Retransmission time-out calculation state
- variable. */
- u8_t rto; /**< Retransmission time-out. */
- u8_t tcpstateflags; /**< TCP state and flags. */
- u8_t timer; /**< The retransmission timer. */
- u8_t nrtx; /**< The number of retransmissions for the last
- segment sent. */
-
- /** The application state. */
- uip_tcp_appstate_t appstate;
-};
-
-
-/**
- * Pointer to the current TCP connection.
- *
- * The uip_conn pointer can be used to access the current TCP
- * connection.
- */
-
-extern struct uip_conn *uip_conn;
-#if UIP_TCP
-/* The array containing all uIP connections. */
-extern struct uip_conn uip_conns[UIP_CONNS];
-#endif
-
-/**
- * \addtogroup uiparch
- * @{
- */
-
-/**
- * 4-byte array used for the 32-bit sequence number calculations.
- */
-extern u8_t uip_acc32[4];
-/** @} */
-
-/**
- * Representation of a uIP UDP connection.
- */
-struct uip_udp_conn {
- uip_ipaddr_t ripaddr; /**< The IP address of the remote peer. */
- u16_t lport; /**< The local port number in network byte order. */
- u16_t rport; /**< The remote port number in network byte order. */
- u8_t ttl; /**< Default time-to-live. */
-
- /** The application state. */
- uip_udp_appstate_t appstate;
-};
-
-/**
- * The current UDP connection.
- */
-extern struct uip_udp_conn *uip_udp_conn;
-extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
-
-struct uip_router {
- int (*activate)(void);
- int (*deactivate)(void);
- uip_ipaddr_t *(*lookup)(uip_ipaddr_t *destipaddr, uip_ipaddr_t *nexthop);
-};
-
-#if UIP_CONF_ROUTER
-extern const struct uip_router *uip_router;
-
-/**
- * uIP routing driver registration function.
- */
-void uip_router_register(const struct uip_router *router);
-#endif /*UIP_CONF_ROUTER*/
-
-#if UIP_CONF_ICMP6
-struct uip_icmp6_conn {
- uip_icmp6_appstate_t appstate;
-};
-extern struct uip_icmp6_conn uip_icmp6_conns;
-#endif /*UIP_CONF_ICMP6*/
-
-/**
- * The uIP TCP/IP statistics.
- *
- * This is the variable in which the uIP TCP/IP statistics are gathered.
- */
-#if UIP_STATISTICS == 1
-extern struct uip_stats uip_stat;
-#define UIP_STAT(s) s
-#else
-#define UIP_STAT(s)
-#endif /* UIP_STATISTICS == 1 */
-
-/**
- * The structure holding the TCP/IP statistics that are gathered if
- * UIP_STATISTICS is set to 1.
- *
- */
-struct uip_stats {
- struct {
- uip_stats_t recv; /**< Number of received packets at the IP
- layer. */
- uip_stats_t sent; /**< Number of sent packets at the IP
- layer. */
- uip_stats_t forwarded;/**< Number of forwarded packets at the IP
- layer. */
- uip_stats_t drop; /**< Number of dropped packets at the IP
- layer. */
- uip_stats_t vhlerr; /**< Number of packets dropped due to wrong
- IP version or header length. */
- uip_stats_t hblenerr; /**< Number of packets dropped due to wrong
- IP length, high byte. */
- uip_stats_t lblenerr; /**< Number of packets dropped due to wrong
- IP length, low byte. */
- uip_stats_t fragerr; /**< Number of packets dropped since they
- were IP fragments. */
- uip_stats_t chkerr; /**< Number of packets dropped due to IP
- checksum errors. */
- uip_stats_t protoerr; /**< Number of packets dropped since they
- were neither ICMP, UDP nor TCP. */
- } ip; /**< IP statistics. */
- struct {
- uip_stats_t recv; /**< Number of received ICMP packets. */
- uip_stats_t sent; /**< Number of sent ICMP packets. */
- uip_stats_t drop; /**< Number of dropped ICMP packets. */
- uip_stats_t typeerr; /**< Number of ICMP packets with a wrong
- type. */
- uip_stats_t chkerr; /**< Number of ICMP packets with a bad
- checksum. */
- } icmp; /**< ICMP statistics. */
-#if UIP_TCP
- struct {
- uip_stats_t recv; /**< Number of received TCP segments. */
- uip_stats_t sent; /**< Number of sent TCP segments. */
- uip_stats_t drop; /**< Number of dropped TCP segments. */
- uip_stats_t chkerr; /**< Number of TCP segments with a bad
- checksum. */
- uip_stats_t ackerr; /**< Number of TCP segments with a bad ACK
- number. */
- uip_stats_t rst; /**< Number of received TCP RST (reset) segments. */
- uip_stats_t rexmit; /**< Number of retransmitted TCP segments. */
- uip_stats_t syndrop; /**< Number of dropped SYNs due to too few
- connections was available. */
- uip_stats_t synrst; /**< Number of SYNs for closed ports,
- triggering a RST. */
- } tcp; /**< TCP statistics. */
-#endif
-#if UIP_UDP
- struct {
- uip_stats_t drop; /**< Number of dropped UDP segments. */
- uip_stats_t recv; /**< Number of received UDP segments. */
- uip_stats_t sent; /**< Number of sent UDP segments. */
- uip_stats_t chkerr; /**< Number of UDP segments with a bad
- checksum. */
- } udp; /**< UDP statistics. */
-#endif /* UIP_UDP */
-#if UIP_CONF_IPV6
- struct {
- uip_stats_t drop; /**< Number of dropped ND6 packets. */
- uip_stats_t recv; /**< Number of received ND6 packets */
- uip_stats_t sent; /**< Number of sent ND6 packets */
- } nd6;
-#endif /*UIP_CONF_IPV6*/
-};
-
-
-/*---------------------------------------------------------------------------*/
-/* All the stuff below this point is internal to uIP and should not be
- * used directly by an application or by a device driver.
- */
-/*---------------------------------------------------------------------------*/
-
-
-
-/* u8_t uip_flags:
- *
- * When the application is called, uip_flags will contain the flags
- * that are defined in this file. Please read below for more
- * information.
- */
-extern u8_t uip_flags;
-
-/* The following flags may be set in the global variable uip_flags
- before calling the application callback. The UIP_ACKDATA,
- UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time,
- whereas the others are mutually exclusive. Note that these flags
- should *NOT* be accessed directly, but only through the uIP
- functions/macros. */
-
-#define UIP_ACKDATA 1 /* Signifies that the outstanding data was
- acked and the application should send
- out new data instead of retransmitting
- the last data. */
-#define UIP_NEWDATA 2 /* Flags the fact that the peer has sent
- us new data. */
-#define UIP_REXMIT 4 /* Tells the application to retransmit the
- data that was last sent. */
-#define UIP_POLL 8 /* Used for polling the application, to
- check if the application has data that
- it wants to send. */
-#define UIP_CLOSE 16 /* The remote host has closed the
- connection, thus the connection has
- gone away. Or the application signals
- that it wants to close the
- connection. */
-#define UIP_ABORT 32 /* The remote host has aborted the
- connection, thus the connection has
- gone away. Or the application signals
- that it wants to abort the
- connection. */
-#define UIP_CONNECTED 64 /* We have got a connection from a remote
- host and have set up a new connection
- for it, or an active connection has
- been successfully established. */
-
-#define UIP_TIMEDOUT 128 /* The connection has been aborted due to
- too many retransmissions. */
-
-
-/**
- * \brief process the options within a hop by hop or destination option header
- * \retval 0: nothing to send,
- * \retval 1: drop pkt
- * \retval 2: ICMP error message to send
-*/
-/*static u8_t
-uip_ext_hdr_options_process(); */
-
-/* uip_process(flag):
- *
- * The actual uIP function which does all the work.
- */
-void uip_process(u8_t flag);
-
- /* The following flags are passed as an argument to the uip_process()
- function. They are used to distinguish between the two cases where
- uip_process() is called. It can be called either because we have
- incoming data that should be processed, or because the periodic
- timer has fired. These values are never used directly, but only in
- the macros defined in this file. */
-
-#define UIP_DATA 1 /* Tells uIP that there is incoming
- data in the uip_buf buffer. The
- length of the data is stored in the
- global variable uip_len. */
-#define UIP_TIMER 2 /* Tells uIP that the periodic timer
- has fired. */
-#define UIP_POLL_REQUEST 3 /* Tells uIP that a connection should
- be polled. */
-#define UIP_UDP_SEND_CONN 4 /* Tells uIP that a UDP datagram
- should be constructed in the
- uip_buf buffer. */
-#if UIP_UDP
-#define UIP_UDP_TIMER 5
-#endif /* UIP_UDP */
-
-/* The TCP states used in the uip_conn->tcpstateflags. */
-#define UIP_CLOSED 0
-#define UIP_SYN_RCVD 1
-#define UIP_SYN_SENT 2
-#define UIP_ESTABLISHED 3
-#define UIP_FIN_WAIT_1 4
-#define UIP_FIN_WAIT_2 5
-#define UIP_CLOSING 6
-#define UIP_TIME_WAIT 7
-#define UIP_LAST_ACK 8
-#define UIP_TS_MASK 15
-
-#define UIP_STOPPED 16
-
-/* The TCP and IP headers. */
-struct uip_tcpip_hdr {
-#if UIP_CONF_IPV6
- /* IPv6 header. */
- u8_t vtc,
- tcflow;
- u16_t flow;
- u8_t len[2];
- u8_t proto, ttl;
- uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
- /* IPv4 header. */
- u8_t vhl,
- tos,
- len[2],
- ipid[2],
- ipoffset[2],
- ttl,
- proto;
- u16_t ipchksum;
- uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-
- /* TCP header. */
- u16_t srcport,
- destport;
- u8_t seqno[4],
- ackno[4],
- tcpoffset,
- flags,
- wnd[2];
- u16_t tcpchksum;
- u8_t urgp[2];
- u8_t optdata[4];
-};
-
-/* The ICMP and IP headers. */
-struct uip_icmpip_hdr {
-#if UIP_CONF_IPV6
- /* IPv6 header. */
- u8_t vtc,
- tcf;
- u16_t flow;
- u8_t len[2];
- u8_t proto, ttl;
- uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
- /* IPv4 header. */
- u8_t vhl,
- tos,
- len[2],
- ipid[2],
- ipoffset[2],
- ttl,
- proto;
- u16_t ipchksum;
- uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-
- /* ICMP header. */
- u8_t type, icode;
- u16_t icmpchksum;
-#if !UIP_CONF_IPV6
- u16_t id, seqno;
- u8_t payload[1];
-#endif /* !UIP_CONF_IPV6 */
-};
-
-
-/* The UDP and IP headers. */
-struct uip_udpip_hdr {
-#if UIP_CONF_IPV6
- /* IPv6 header. */
- u8_t vtc,
- tcf;
- u16_t flow;
- u8_t len[2];
- u8_t proto, ttl;
- uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
- /* IP header. */
- u8_t vhl,
- tos,
- len[2],
- ipid[2],
- ipoffset[2],
- ttl,
- proto;
- u16_t ipchksum;
- uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-
- /* UDP header. */
- u16_t srcport,
- destport;
- u16_t udplen;
- u16_t udpchksum;
-};
-
-/*
- * In IPv6 the length of the L3 headers before the transport header is
- * not fixed, due to the possibility to include extension option headers
- * after the IP header. hence we split here L3 and L4 headers
- */
-/* The IP header */
-struct uip_ip_hdr {
-#if UIP_CONF_IPV6
- /* IPV6 header */
- u8_t vtc;
- u8_t tcflow;
- u16_t flow;
- u8_t len[2];
- u8_t proto, ttl;
- uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
- /* IPV4 header */
- u8_t vhl,
- tos,
- len[2],
- ipid[2],
- ipoffset[2],
- ttl,
- proto;
- u16_t ipchksum;
- uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-};
-
-
-/*
- * IPv6 extension option headers: we are able to process
- * the 4 extension headers defined in RFC2460 (IPv6):
- * - Hop by hop option header, destination option header:
- * These two are not used by any core IPv6 protocol, hence
- * we just read them and go to the next. They convey options,
- * the options defined in RFC2460 are Pad1 and PadN, which do
- * some padding, and that we do not need to read (the length
- * field in the header is enough)
- * - Routing header: this one is most notably used by MIPv6,
- * which we do not implement, hence we just read it and go
- * to the next
- * - Fragmentation header: we read this header and are able to
- * reassemble packets
- *
- * We do not offer any means to send packets with extension headers
- *
- * We do not implement Authentication and ESP headers, which are
- * used in IPSec and defined in RFC4302,4303,4305,4385
- */
-/* common header part */
-struct uip_ext_hdr {
- u8_t next;
- u8_t len;
-};
-
-/* Hop by Hop option header */
-struct uip_hbho_hdr {
- u8_t next;
- u8_t len;
-};
-
-/* destination option header */
-struct uip_desto_hdr {
- u8_t next;
- u8_t len;
-};
-
-/* We do not define structures for PAD1 and PADN options */
-
-/*
- * routing header
- * the routing header as 4 common bytes, then routing header type
- * specific data there are several types of routing header. Type 0 was
- * deprecated as per RFC5095 most notable other type is 2, used in
- * RFC3775 (MIPv6) here we do not implement MIPv6, so we just need to
- * parse the 4 first bytes
- */
-struct uip_routing_hdr {
- u8_t next;
- u8_t len;
- u8_t routing_type;
- u8_t seg_left;
-};
-
-/* fragmentation header */
-struct uip_frag_hdr {
- u8_t next;
- u8_t res;
- u16_t offsetresmore;
- u32_t id;
-};
-
-/*
- * an option within the destination or hop by hop option headers
- * it contains type an length, which is true for all options but PAD1
- */
-struct uip_ext_hdr_opt {
- u8_t type;
- u8_t len;
-};
-
-/* PADN option */
-struct uip_ext_hdr_opt_padn {
- u8_t opt_type;
- u8_t opt_len;
-};
-
-/* TCP header */
-struct uip_tcp_hdr {
- u16_t srcport;
- u16_t destport;
- u8_t seqno[4];
- u8_t ackno[4];
- u8_t tcpoffset;
- u8_t flags;
- u8_t wnd[2];
- u16_t tcpchksum;
- u8_t urgp[2];
- u8_t optdata[4];
-};
-
-/* The ICMP headers. */
-struct uip_icmp_hdr {
- u8_t type, icode;
- u16_t icmpchksum;
-#if !UIP_CONF_IPV6
- u16_t id, seqno;
-#endif /* !UIP_CONF_IPV6 */
-};
-
-
-/* The UDP headers. */
-struct uip_udp_hdr {
- u16_t srcport;
- u16_t destport;
- u16_t udplen;
- u16_t udpchksum;
-};
-
-
-/**
- * The buffer size available for user data in the \ref uip_buf buffer.
- *
- * This macro holds the available size for user data in the \ref
- * uip_buf buffer. The macro is intended to be used for checking
- * bounds of available user data.
- *
- * Example:
- \code
- snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i);
- \endcode
- *
- * \hideinitializer
- */
-#define UIP_APPDATA_SIZE (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
-#define UIP_APPDATA_PTR (void *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]
-
-#define UIP_PROTO_ICMP 1
-#define UIP_PROTO_TCP 6
-#define UIP_PROTO_UDP 17
-#define UIP_PROTO_ICMP6 58
-
-
-#if UIP_CONF_IPV6
-/** @{ */
-/** \brief extension headers types */
-#define UIP_PROTO_HBHO 0
-#define UIP_PROTO_DESTO 60
-#define UIP_PROTO_ROUTING 43
-#define UIP_PROTO_FRAG 44
-#define UIP_PROTO_NONE 59
-/** @} */
-
-/** @{ */
-/** \brief Destination and Hop By Hop extension headers option types */
-#define UIP_EXT_HDR_OPT_PAD1 0
-#define UIP_EXT_HDR_OPT_PADN 1
-/** @} */
-
-/** @{ */
-/**
- * \brief Bitmaps for extension header processing
- *
- * When processing extension headers, we should record somehow which one we
- * see, because you cannot have twice the same header, except for destination
- * We store all this in one u8_t bitmap one bit for each header expected. The
- * order in the bitmap is the order recommended in RFC2460
- */
-#define UIP_EXT_HDR_BITMAP_HBHO 0x01
-#define UIP_EXT_HDR_BITMAP_DESTO1 0x02
-#define UIP_EXT_HDR_BITMAP_ROUTING 0x04
-#define UIP_EXT_HDR_BITMAP_FRAG 0x08
-#define UIP_EXT_HDR_BITMAP_AH 0x10
-#define UIP_EXT_HDR_BITMAP_ESP 0x20
-#define UIP_EXT_HDR_BITMAP_DESTO2 0x40
-/** @} */
-
-
-#endif /* UIP_CONF_IPV6 */
-
-
-/* Header sizes. */
-#if UIP_CONF_IPV6
-#define UIP_IPH_LEN 40
-#define UIP_FRAGH_LEN 8
-#else /* UIP_CONF_IPV6 */
-#define UIP_IPH_LEN 20 /* Size of IP header */
-#endif /* UIP_CONF_IPV6 */
-
-#define UIP_UDPH_LEN 8 /* Size of UDP header */
-#define UIP_TCPH_LEN 20 /* Size of TCP header */
-#ifdef UIP_IPH_LEN
-#define UIP_ICMPH_LEN 4 /* Size of ICMP header */
-#endif
-#define UIP_IPUDPH_LEN (UIP_UDPH_LEN + UIP_IPH_LEN) /* Size of IP +
- * UDP
- * header */
-#define UIP_IPTCPH_LEN (UIP_TCPH_LEN + UIP_IPH_LEN) /* Size of IP +
- * TCP
- * header */
-#define UIP_TCPIP_HLEN UIP_IPTCPH_LEN
-#define UIP_IPICMPH_LEN (UIP_IPH_LEN + UIP_ICMPH_LEN) /* size of ICMP
- + IP header */
-#define UIP_LLIPH_LEN (UIP_LLH_LEN + UIP_IPH_LEN) /* size of L2
- + IP header */
-#if UIP_CONF_IPV6
-/**
- * The sums below are quite used in ND. When used for uip_buf, we
- * include link layer length when used for uip_len, we do not, hence
- * we need values with and without LLH_LEN we do not use capital
- * letters as these values are variable
- */
-#define uip_l2_l3_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len)
-#define uip_l2_l3_icmp_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN)
-#define uip_l3_hdr_len (UIP_IPH_LEN + uip_ext_len)
-#define uip_l3_icmp_hdr_len (UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN)
-#endif /*UIP_CONF_IPV6*/
-
-
-#if UIP_FIXEDADDR
-extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
-#else /* UIP_FIXEDADDR */
-extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
-#endif /* UIP_FIXEDADDR */
-extern const uip_ipaddr_t uip_broadcast_addr;
-extern const uip_ipaddr_t uip_all_zeroes_addr;
-
-#if UIP_FIXEDETHADDR
-extern const uip_lladdr_t uip_lladdr;
-#else
-extern uip_lladdr_t uip_lladdr;
-#endif
-
-
-
-
-#ifdef UIP_CONF_IPV6
-/**
- * \brief Is IPv6 address a the unspecified address
- * a is of type uip_ipaddr_t
- */
-#define uip_is_addr_unspecified(a) \
- ((((a)->u16[0]) == 0) && \
- (((a)->u16[1]) == 0) && \
- (((a)->u16[2]) == 0) && \
- (((a)->u16[3]) == 0) && \
- (((a)->u16[4]) == 0) && \
- (((a)->u16[5]) == 0) && \
- (((a)->u16[6]) == 0) && \
- (((a)->u16[7]) == 0))
-
-/** \brief Is IPv6 address a the link local all-nodes multicast address */
-#define uip_is_addr_linklocal_allnodes_mcast(a) \
- ((((a)->u8[0]) == 0xff) && \
- (((a)->u8[1]) == 0x02) && \
- (((a)->u16[1]) == 0) && \
- (((a)->u16[2]) == 0) && \
- (((a)->u16[3]) == 0) && \
- (((a)->u16[4]) == 0) && \
- (((a)->u16[5]) == 0) && \
- (((a)->u16[6]) == 0) && \
- (((a)->u8[14]) == 0) && \
- (((a)->u8[15]) == 0x01))
-
-/** \brief set IP address a to unspecified */
-#define uip_create_unspecified(a) uip_ip6addr(a, 0, 0, 0, 0, 0, 0, 0, 0)
-
-/** \brief set IP address a to the link local all-nodes multicast address */
-#define uip_create_linklocal_allnodes_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001)
-
-/** \brief set IP address a to the link local all-routers multicast address */
-#define uip_create_linklocal_allrouters_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0002)
-
-/**
- * \brief is addr (a) a solicited node multicast address, see RFC3513
- * a is of type uip_ipaddr_t*
- */
-#define uip_is_addr_solicited_node(a) \
- ((((a)->u8[0]) == 0xFF) && \
- (((a)->u8[1]) == 0x02) && \
- (((a)->u16[1]) == 0) && \
- (((a)->u16[2]) == 0) && \
- (((a)->u16[3]) == 0) && \
- (((a)->u16[4]) == 0) && \
- (((a)->u16[5]) == 1) && \
- (((a)->u8[12]) == 0xFF))
-
-/**
- * \briefput in b the solicited node address corresponding to address a
- * both a and b are of type uip_ipaddr_t*
- * */
-#define uip_create_solicited_node(a, b) \
- (((b)->u8[0]) = 0xFF); \
- (((b)->u8[1]) = 0x02); \
- (((b)->u16[1]) = 0); \
- (((b)->u16[2]) = 0); \
- (((b)->u16[3]) = 0); \
- (((b)->u16[4]) = 0); \
- (((b)->u8[10]) = 0); \
- (((b)->u8[11]) = 0x01); \
- (((b)->u8[12]) = 0xFF); \
- (((b)->u8[13]) = ((a)->u8[13])); \
- (((b)->u16[7]) = ((a)->u16[7]))
-
-/**
- * \brief is addr (a) a link local unicast address, see RFC3513
- * i.e. is (a) on prefix FE80::/10
- * a is of type uip_ipaddr_t*
- */
-#define uip_is_addr_link_local(a) \
- ((((a)->u8[0]) == 0xFE) && \
- (((a)->u8[1]) == 0x80))
-
-/**
- * \brief was addr (a) forged based on the mac address m
- * a type is uip_ipaddr_t
- * m type is uiplladdr_t
- */
-#if UIP_CONF_LL_802154
-#define uip_is_addr_mac_addr_based(a, m) \
- ((((a)->u8[8]) == (((m)->addr[0]) ^ 0x02)) && \
- (((a)->u8[9]) == (m)->addr[1]) && \
- (((a)->u8[10]) == (m)->addr[2]) && \
- (((a)->u8[11]) == (m)->addr[3]) && \
- (((a)->u8[12]) == (m)->addr[4]) && \
- (((a)->u8[13]) == (m)->addr[5]) && \
- (((a)->u8[14]) == (m)->addr[6]) && \
- (((a)->u8[15]) == (m)->addr[7]))
-#else
-
-#define uip_is_addr_mac_addr_based(a, m) \
- ((((a)->u8[8]) == (((m)->addr[0]) | 0x02)) && \
- (((a)->u8[9]) == (m)->addr[1]) && \
- (((a)->u8[10]) == (m)->addr[2]) && \
- (((a)->u8[11]) == 0xff) && \
- (((a)->u8[12]) == 0xfe) && \
- (((a)->u8[13]) == (m)->addr[3]) && \
- (((a)->u8[14]) == (m)->addr[4]) && \
- (((a)->u8[15]) == (m)->addr[5]))
-
-#endif /*UIP_CONF_LL_802154*/
-
-/**
- * \brief is address a multicast address, see RFC 3513
- * a is of type uip_ipaddr_t*
- * */
-#define uip_is_addr_mcast(a) \
- (((a)->u8[0]) == 0xFF)
-
-/**
- * \brief is group-id of multicast address a
- * the all nodes group-id
- */
-#define uip_is_mcast_group_id_all_nodes(a) \
- ((((a)->u16[1]) == 0) && \
- (((a)->u16[2]) == 0) && \
- (((a)->u16[3]) == 0) && \
- (((a)->u16[4]) == 0) && \
- (((a)->u16[5]) == 0) && \
- (((a)->u16[6]) == 0) && \
- (((a)->u8[14]) == 0) && \
- (((a)->u8[15]) == 1))
-
-/**
- * \brief is group-id of multicast address a
- * the all routers group-id
- */
-#define uip_is_mcast_group_id_all_routers(a) \
- ((((a)->u16[1]) == 0) && \
- (((a)->u16[2]) == 0) && \
- (((a)->u16[3]) == 0) && \
- (((a)->u16[4]) == 0) && \
- (((a)->u16[5]) == 0) && \
- (((a)->u16[6]) == 0) && \
- (((a)->u8[14]) == 0) && \
- (((a)->u8[15]) == 2))
-
-
-#endif /*UIP_CONF_IPV6*/
-
-/**
- * Calculate the Internet checksum over a buffer.
- *
- * The Internet checksum is the one's complement of the one's
- * complement sum of all 16-bit words in the buffer.
- *
- * See RFC1071.
- *
- * \param buf A pointer to the buffer over which the checksum is to be
- * computed.
- *
- * \param len The length of the buffer over which the checksum is to
- * be computed.
- *
- * \return The Internet checksum of the buffer.
- */
-u16_t uip_chksum(u16_t *buf, u16_t len);
-
-/**
- * Calculate the IP header checksum of the packet header in uip_buf.
- *
- * The IP header checksum is the Internet checksum of the 20 bytes of
- * the IP header.
- *
- * \return The IP header checksum of the IP header in the uip_buf
- * buffer.
- */
-u16_t uip_ipchksum(void);
-
-/**
- * Calculate the TCP checksum of the packet in uip_buf and uip_appdata.
- *
- * The TCP checksum is the Internet checksum of data contents of the
- * TCP segment, and a pseudo-header as defined in RFC793.
- *
- * \return The TCP checksum of the TCP segment in uip_buf and pointed
- * to by uip_appdata.
- */
-u16_t uip_tcpchksum(void);
-
-/**
- * Calculate the UDP checksum of the packet in uip_buf and uip_appdata.
- *
- * The UDP checksum is the Internet checksum of data contents of the
- * UDP segment, and a pseudo-header as defined in RFC768.
- *
- * \return The UDP checksum of the UDP segment in uip_buf and pointed
- * to by uip_appdata.
- */
-u16_t uip_udpchksum(void);
-
-/**
- * Calculate the ICMP checksum of the packet in uip_buf.
- *
- * \return The ICMP checksum of the ICMP packet in uip_buf
- */
-u16_t uip_icmp6chksum(void);
-
-
-#endif /* __UIP_H__ */
-
-
-/** @} */
-