aboutsummaryrefslogtreecommitdiffstats
path: root/tmk_core/common/chibios/flash_stm32.c
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/common/chibios/flash_stm32.c')
-rwxr-xr-xtmk_core/common/chibios/flash_stm32.c24
1 files changed, 16 insertions, 8 deletions
diff --git a/tmk_core/common/chibios/flash_stm32.c b/tmk_core/common/chibios/flash_stm32.c
index e7199ac7b..273593484 100755
--- a/tmk_core/common/chibios/flash_stm32.c
+++ b/tmk_core/common/chibios/flash_stm32.c
@@ -10,19 +10,27 @@
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
- * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and
+ * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and
* https://github.com/leaflabs/libmaple
*
* Modifications for QMK and STM32F303 by Yiancar
*/
-#define STM32F303xC
+#if defined(EEPROM_EMU_STM32F303xC)
+ #define STM32F303xC
+ #include "stm32f3xx.h"
+#elif defined(EEPROM_EMU_STM32F103xB)
+ #define STM32F103xB
+ #include "stm32f1xx.h"
+#else
+ #error "not implemented."
+#endif
-#include "stm32f3xx.h"
#include "flash_stm32.h"
-#define FLASH_KEY1 ((uint32_t)0x45670123)
-#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+#if defined(EEPROM_EMU_STM32F103xB)
+ #define FLASH_SR_WRPERR FLASH_SR_WRPRTERR
+#endif
/* Delay definition */
#define EraseTimeout ((uint32_t)0x00000FFF)
@@ -71,7 +79,7 @@ FLASH_Status FLASH_GetStatus(void)
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
-{
+{
FLASH_Status status;
/* Check for the Flash Status */
@@ -102,7 +110,7 @@ FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
ASSERT(IS_FLASH_ADDRESS(Page_Address));
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation(EraseTimeout);
-
+
if(status == FLASH_COMPLETE)
{
/* if the previous operation is completed, proceed to erase the page */
@@ -128,7 +136,7 @@ FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
* @param Address: specifies the address to be programmed.
* @param Data: specifies the data to be programmed.
* @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
{