diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/usb/conf_usb.h')
-rw-r--r-- | tmk_core/protocol/arm_atsam/usb/conf_usb.h | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/conf_usb.h b/tmk_core/protocol/arm_atsam/usb/conf_usb.h new file mode 100644 index 000000000..c91caffe0 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/usb/conf_usb.h @@ -0,0 +1,168 @@ +/** + * \file + * + * \brief USB configuration file + * + * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> + */ + +#ifndef _CONF_USB_H_ +#define _CONF_USB_H_ + +#include "compiler.h" +#include "udi_device_conf.h" + +#define UDI_CDC_DEFAULT_RATE 115200 +#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 +#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE +#define UDI_CDC_DEFAULT_DATABITS 8 + +//! Device definition (mandatory) +#define USB_DEVICE_VENDOR_ID VENDOR_ID +#define USB_DEVICE_PRODUCT_ID PRODUCT_ID +#define USB_DEVICE_VERSION DEVICE_VER +#define USB_DEVICE_POWER 500 // Consumption on Vbus line (mA) +#define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED) +// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED) +// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED) +// (USB_CONFIG_ATTR_SELF_POWERED) +// (USB_CONFIG_ATTR_BUS_POWERED) + +//! USB Device string definitions (Optional) +#define USB_DEVICE_MANUFACTURE_NAME MANUFACTURER +#define USB_DEVICE_PRODUCT_NAME PRODUCT +#define USB_DEVICE_SERIAL_NAME SERIAL_NUM + +//Comment out USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL to prevent ROM lookup of factory programmed serial number +#define USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL + +/** + * Device speeds support + * @{ + */ +//! To define a Low speed device +//#define USB_DEVICE_LOW_SPEED + +//! To authorize the High speed +#if (UC3A3||UC3A4) +//#define USB_DEVICE_HS_SUPPORT +#elif (SAM3XA||SAM3U) +//#define USB_DEVICE_HS_SUPPORT +#endif +//@} + +/** + * USB Device Callbacks definitions (Optional) + * @{ + */ +#define UDC_VBUS_EVENT(b_vbus_high) +#define UDC_SOF_EVENT() main_sof_action() +#define UDC_SUSPEND_EVENT() main_suspend_action() +#define UDC_RESUME_EVENT() main_resume_action() +//! Mandatory when USB_DEVICE_ATTR authorizes remote wakeup feature +#define UDC_REMOTEWAKEUP_ENABLE() main_remotewakeup_enable() +#define UDC_REMOTEWAKEUP_DISABLE() main_remotewakeup_disable() +//! When a extra string descriptor must be supported +//! other than manufacturer, product and serial string +// #define UDC_GET_EXTRA_STRING() +//@} + +//@} + + +/** + * USB Interface Configuration + * @{ + */ +/** + * Configuration of HID Keyboard interface + * @{ + */ +//! Interface callback definition +#ifdef KBD +#define UDI_HID_KBD_ENABLE_EXT() main_kbd_enable() +#define UDI_HID_KBD_DISABLE_EXT() main_kbd_disable() +//#define UDI_HID_KBD_CHANGE_LED(value) ui_kbd_led(value) +#endif + +#ifdef NKRO +#define UDI_HID_NKRO_ENABLE_EXT() main_nkro_enable() +#define UDI_HID_NKRO_DISABLE_EXT() main_nkro_disable() +//#define UDI_HID_NKRO_CHANGE_LED(value) ui_kbd_led(value) +#endif + +#ifdef EXK +#define UDI_HID_EXK_ENABLE_EXT() main_exk_enable() +#define UDI_HID_EXK_DISABLE_EXT() main_exk_disable() +#endif + +#ifdef CON +#define UDI_HID_CON_ENABLE_EXT() main_con_enable() +#define UDI_HID_CON_DISABLE_EXT() main_con_disable() +#endif + +#ifdef MOU +#define UDI_HID_MOU_ENABLE_EXT() main_mou_enable() +#define UDI_HID_MOU_DISABLE_EXT() main_mou_disable() +#endif + +#ifdef RAW +#define UDI_HID_RAW_ENABLE_EXT() main_raw_enable() +#define UDI_HID_RAW_DISABLE_EXT() main_raw_disable() +#endif + + +//@} +//@} + + +/** + * USB Device Driver Configuration + * @{ + */ +//@} + +//! The includes of classes and other headers must be done at the end of this file to avoid compile error +#include "udi_hid_kbd_conf.h" +#include "usb_main.h" +#include "ui.h" + +#endif // _CONF_USB_H_ |