diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/usb')
-rw-r--r-- | tmk_core/protocol/arm_atsam/usb/usb2422.c | 85 |
1 files changed, 41 insertions, 44 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb2422.c index 7c78e41d4..ac19bf4ea 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.c +++ b/tmk_core/protocol/arm_atsam/usb/usb2422.c @@ -77,7 +77,6 @@ void USB2422_init(void) Port *pport = PORT; Oscctrl *posc = OSCCTRL; Usb *pusb = USB; - Srdata_t *pspi = &srdata; DBGC(DC_USB2422_INIT_BEGIN); @@ -132,9 +131,9 @@ void USB2422_init(void) i2c0_init(); //IC2 clk must be high at USB2422 reset release time to signal SMB configuration - pspi->bit.HUB_CONNECT = 1; //connect signal - pspi->bit.HUB_RESET_N = 1; //reset high - SPI_WriteSRData(); + sr_exp_data.bit.HUB_CONNECT = 1; //connect signal + sr_exp_data.bit.HUB_RESET_N = 1; //reset high + SR_EXP_WriteData(); CLK_delay_us(100); @@ -150,16 +149,14 @@ void USB2422_init(void) void USB_reset(void) { - Srdata_t *pspi = &srdata; - DBGC(DC_USB_RESET_BEGIN); //pulse reset for at least 1 usec - pspi->bit.HUB_RESET_N = 0; //reset low - SPI_WriteSRData(); + sr_exp_data.bit.HUB_RESET_N = 0; //reset low + SR_EXP_WriteData(); CLK_delay_us(1); - pspi->bit.HUB_RESET_N = 1; //reset high to run - SPI_WriteSRData(); + sr_exp_data.bit.HUB_RESET_N = 1; //reset high to run + SR_EXP_WriteData(); CLK_delay_us(1); DBGC(DC_USB_RESET_COMPLETE); @@ -241,14 +238,14 @@ void USB_set_host_by_voltage(void) #ifndef MD_BOOTLOADER usb_extra_state = USB_EXTRA_STATE_UNKNOWN; #endif //MD_BOOTLOADER - srdata.bit.SRC_1 = 1; //USBC-1 available for test - srdata.bit.SRC_2 = 1; //USBC-2 available for test - srdata.bit.E_UP_N = 1; //HOST disable - srdata.bit.E_DN1_N = 1; //EXTRA disable - srdata.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O - srdata.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O + sr_exp_data.bit.SRC_1 = 1; //USBC-1 available for test + sr_exp_data.bit.SRC_2 = 1; //USBC-2 available for test + sr_exp_data.bit.E_UP_N = 1; //HOST disable + sr_exp_data.bit.E_DN1_N = 1; //EXTRA disable + sr_exp_data.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O + sr_exp_data.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O - SPI_WriteSRData(); + SR_EXP_WriteData(); CLK_delay_ms(250); @@ -262,37 +259,37 @@ void USB_set_host_by_voltage(void) if (v_con_1 > v_con_2) { - srdata.bit.S_UP = 0; //HOST to USBC-1 - srdata.bit.S_DN1 = 1; //EXTRA to USBC-2 - srdata.bit.SRC_1 = 1; //HOST on USBC-1 - srdata.bit.SRC_2 = 0; //EXTRA available on USBC-2 + sr_exp_data.bit.S_UP = 0; //HOST to USBC-1 + sr_exp_data.bit.S_DN1 = 1; //EXTRA to USBC-2 + sr_exp_data.bit.SRC_1 = 1; //HOST on USBC-1 + sr_exp_data.bit.SRC_2 = 0; //EXTRA available on USBC-2 - srdata.bit.E_VBUS_1 = 1; //USBC-1 enable full power I/O - srdata.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O + sr_exp_data.bit.E_VBUS_1 = 1; //USBC-1 enable full power I/O + sr_exp_data.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O - SPI_WriteSRData(); + SR_EXP_WriteData(); - srdata.bit.E_UP_N = 0; //HOST enable + sr_exp_data.bit.E_UP_N = 0; //HOST enable - SPI_WriteSRData(); + SR_EXP_WriteData(); usb_host_port = USB_HOST_PORT_1; } else { - srdata.bit.S_UP = 1; //EXTRA to USBC-1 - srdata.bit.S_DN1 = 0; //HOST to USBC-2 - srdata.bit.SRC_1 = 0; //EXTRA available on USBC-1 - srdata.bit.SRC_2 = 1; //HOST on USBC-2 + sr_exp_data.bit.S_UP = 1; //EXTRA to USBC-1 + sr_exp_data.bit.S_DN1 = 0; //HOST to USBC-2 + sr_exp_data.bit.SRC_1 = 0; //EXTRA available on USBC-1 + sr_exp_data.bit.SRC_2 = 1; //HOST on USBC-2 - srdata.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O - srdata.bit.E_VBUS_2 = 1; //USBC-2 enable full power I/O + sr_exp_data.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O + sr_exp_data.bit.E_VBUS_2 = 1; //USBC-2 enable full power I/O - SPI_WriteSRData(); + SR_EXP_WriteData(); - srdata.bit.E_UP_N = 0; //HOST enable + sr_exp_data.bit.E_UP_N = 0; //HOST enable - SPI_WriteSRData(); + SR_EXP_WriteData(); usb_host_port = USB_HOST_PORT_2; } @@ -325,15 +322,15 @@ uint8_t USB2422_Port_Detect_Init(void) if (v_con_1 > v_con_2) //Values updated from USB_set_host_by_voltage(); { //1 flash for port 1 detected - if (tmod > 500 && tmod < 600) { led_on; } - else { led_off; } + if (tmod > 500 && tmod < 600) { DBG_LED_ON; } + else { DBG_LED_OFF; } } else if (v_con_2 > v_con_1) //Values updated from USB_set_host_by_voltage(); { //2 flash for port 2 detected - if (tmod > 500 && tmod < 600) { led_on; } - else if (tmod > 700 && tmod < 800) { led_on; } - else { led_off; } + if (tmod > 500 && tmod < 600) { DBG_LED_ON; } + else if (tmod > 700 && tmod < 800) { DBG_LED_ON; } + else { DBG_LED_OFF; } } if (CLK_get_ms() > port_detect_retry_ms) @@ -357,12 +354,12 @@ void USB_ExtraSetState(uint8_t state) if (state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) state = USB_EXTRA_STATE_DISABLED; - if (usb_host_port == USB_HOST_PORT_1) srdata.bit.E_VBUS_2 = state; - else if (usb_host_port == USB_HOST_PORT_2) srdata.bit.E_VBUS_1 = state; + if (usb_host_port == USB_HOST_PORT_1) sr_exp_data.bit.E_VBUS_2 = state; + else if (usb_host_port == USB_HOST_PORT_2) sr_exp_data.bit.E_VBUS_1 = state; else return; - srdata.bit.E_DN1_N = !state; - SPI_WriteSRData(); + sr_exp_data.bit.E_DN1_N = !state; + SR_EXP_WriteData(); usb_extra_state = state_save; |