avr/qmk/firmware - [no description]

	Commit message (Expand)	Author	Age	Files	Lines
*	Set unused USB serial buffer to 1 byte to save memory	Fred Sundvik	2018-02-12	1	-1/+1
*	Fix call to memset for various keyboards	Kaleb Elwert	2018-01-12	1	-2/+2
*	k_type: add belak keymap	Kaleb Elwert	2017-12-19	1	-0/+37
*	Initial K-Type support (#1963)	Kaleb Elwert	2017-12-14	13	-0/+1805

#include QMK_KEYBOARD_H #ifdef PROTOCOL_LUFA #include "lufa.h" #include "split_util.h" #endif #ifdef SSD1306OLED #include "ssd1306.h" #endif extern keymap_config_t keymap_config; extern uint8_t is_master; // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. enum custom_keycodes { QWERTY = SAFE_RANGE, LOWER, RAISE }; enum macro_keycodes { KC_SAMPLEMACRO, }; // common #define KC_ KC_TRNS #define KC_XXXX KC_NO #define KC_RST RESET #define KC_VD KC__VOLDOWN #define KC_VU KC__VOLUP // layer #define KC_L_SPC LT(_LOWER, KC_SPC) #define KC_R_ENT LT(_RAISE, KC_ENT) // shift_t #define KC_S_TAB LSFT_T(KC_TAB) #define KC_S_ESC LSFT_T(KC_ESC) #define KC_S_JA LSFT_T(KC_LANG1) #define KC_S_EN LSFT_T(KC_LANG2) // cmd_t #define KC_M_F LCMD_T(KC_F) #define KC_M_D LCMD_T(KC_D) #define KC_M_J LCMD_T(KC_J) #define KC_M_K LCMD_T(KC_K) // ctl_t #define KC_C_S LCTL_T(KC_S) #define KC_C_L LCTL_T(KC_L) #define KC_C_BS LCTL_T(KC_BSPC) // alt_t #define KC_A_D ALT_T(KC_D) #define KC_A_K ALT_T(KC_K) #define KC_A_Z ALT_T(KC_Z) #define KC_A_SL ALT_T(KC_SLSH) #define KC_A_DEL ALT_T(KC_DEL) // cmd+shift_t #define KC_MS_Q SCMD_T(KC_Q) #define KC_MS_A SCMD_T(KC_A) #define KC_MS_S SCMD_T(KC_S) #define KC_MS_SC SCMD_T(KC_SCLN) #define KC_MS_ESC SCMD_T(KC_ESC) // #define KC_MR RCMD(KC_R) #define KC_MF RCMD(KC_F) #define KC_MW RCMD(KC_W) #define KC_MX RCMD(KC_X) #define KC_MC RCMD(KC_C) #define KC_MV RCMD(KC_V) #define KC_MTAB RCMD(KC_TAB) #define KC_MSF RCMD(RSFT(KC_F)) #define KC_MSR RCMD(RSFT(KC_R)) #define KC_MST RCMD(RSFT(KC_T)) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // M_ = LCMD_T( // A_ = ALT_T( // C_ = LCTL_T( // MS_ = SMD_T( // R_ = LT(_RAISE // L_ = LT(_LOWER [_QWERTY] = LAYOUT_kc( \ //,----+----+----+----+----+----. ,----+----+----+----+----+----. ESC , Q , W , E , R , T , Y , U , I , O , P ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| S_TAB, A ,C_S , D ,M_F , G , H ,M_J , K ,C_L ,SCLN,S_ESC, //|----+----+----+----+----+----+ |----+----+----+----+----+----| , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, , //`----+----+----+----+----+----/ \----+----+----+----+----+----' A_DEL,S_EN,L_SPC,C_BS, C_BS,R_ENT,S_JA,A_DEL // `----+----+----+----' `----+----+----+----' ), // \ ^ ! & | @ = + * % - // ( # $ " ' ~ ← ↓ ↑ → ` ) // { [ ] } [_RAISE] = LAYOUT_kc( \ //,----+----+----+----+----+----. ,----+----+----+----+----+----. ,BSLS,CIRC,EXLM,AMPR,PIPE, AT ,EQL ,PLUS,ASTR,PERC,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| LPRN,HASH,DLR ,DQT ,QUOT,TILD, LEFT,DOWN, UP ,RGHT,GRV ,RPRN, //|----+----+----+----+----+----| |----+----+----+----+----+----| , , , ,LCBR,LBRC, RBRC,RCBR, , , , , //`----+----+----+----+----+----/ \----+----+----+----+----+----' , ,BSPC, , , , ,RST // `----+----+----+----' `----+----+----+----' ), [_LOWER] = LAYOUT_kc( \ //,----+----+----+----+----+----. ,----+----+----+----+----+----. , , ,MSF ,MSR ,MST , ,EQL ,PLUS,ASTR,PERC,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----| |----+----+----+----+----+----| , , , , , , , ,COMM,DOT ,SLSH, , //`----+----+----+--+-+----+----/ \----+----+----+----+----+----' RST , , , , ,DEL , , // `----+----+----+----' `----+----+----+----' ), }; void matrix_init_user(void) { //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h #ifdef SSD1306OLED iota_gfx_init(!has_usb()); // turns on the display #endif } //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h #ifdef SSD1306OLED // When add source files to SRC in rules.mk, you can use functions. const char *read_layer_state(void); const char *read_logo(void); void set_keylog(uint16_t keycode, keyrecord_t *record); const char *read_keylog(void); const char *read_keylogs(void); // const char *read_mode_icon(bool swap); // const char *read_host_led_state(void); // void set_timelog(void); // const char *read_timelog(void); void matrix_scan_user(void) { iota_gfx_task(); } void matrix_render_user(struct CharacterMatrix *matrix) { if (is_master) { // If you want to change the display of OLED, you need to change here matrix_write_ln(matrix, read_layer_state()); matrix_write_ln(matrix, read_keylog()); matrix_write_ln(matrix, read_keylogs()); //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); //matrix_write_ln(matrix, read_host_led_state()); //matrix_write_ln(matrix, read_timelog()); } else { matrix_write(matrix, read_logo()); } } void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { if (memcmp(dest->display, source->display, sizeof(dest->display))) { memcpy(dest->display, source->display, sizeof(dest->display)); dest->dirty = true; } } void iota_gfx_task_user(void) { struct CharacterMatrix matrix; matrix_clear(&matrix); matrix_render_user(&matrix); matrix_update(&display, &matrix); } #endif//SSD1306OLED bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef SSD1306OLED set_keylog(keycode, record); #endif // set_timelog(); } switch (keycode) { case QWERTY: if (record->event.pressed) { set_single_persistent_default_layer(_QWERTY); } return false; break; case LOWER: if (record->event.pressed) { layer_on(_LOWER); } else { layer_off(_LOWER); } return false; break; case RAISE: if (record->event.pressed) { layer_on(_RAISE); } else { layer_off(_RAISE); } return false; break; } return true; }