keyboards/ergo42/rev1/config.h


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
Copyright 2017 Biacco42

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0xBC42
#define PRODUCT_ID      0x0042
#define DEVICE_VER      0x0100
#define MANUFACTURER    Biacco42
#define PRODUCT         Ergo42
#define DESCRIPTION     The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards

/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 7

// wiring of each half
#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order

#define CATERINA_BOOTLOADER

/* define tapping term */
#define TAPPING_TERM 100

/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST

/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3

/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* key combination for command */
#define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)

/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12    // Number of LEDs
#define ws2812_PORTREG  PORTD
#define ws2812_DDRREG   DDRD

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
// #define NO_DEBUG

/* disable print */
// #define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION


#endif
/*
Copyright 2017 Danny Nguyen <danny@keeb.io>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/*
 * scan matrix
 */
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "pro_micro.h"
#include "config.h"
#include "timer.h"

#ifdef BACKLIGHT_ENABLE
    #include "backlight.h"
    extern backlight_config_t backlight_config;
#endif

#ifdef USE_I2C
#  include "i2c.h"
#else // USE_SERIAL
#  include "serial.h"
#endif

#ifndef DEBOUNCING_DELAY
#   define DEBOUNCING_DELAY 5
#endif

#if (DEBOUNCING_DELAY > 0)
    static uint16_t debouncing_time;
    static bool debouncing = false;
#endif

#if (MATRIX_COLS <= 8)
#    define print_matrix_header()  print("\nr/c 01234567\n")
#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
#    define matrix_bitpop(i)       bitpop(matrix[i])
#    define ROW_SHIFTER ((uint8_t)1)
#else
#    error "Currently only supports 8 COLS"
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];

#define ERROR_DISCONNECT_COUNT 5

#define SERIAL_LED_ADDR 0x00

#define ROWS_PER_HAND (MATRIX_ROWS/2)

static uint8_t error_count = 0;

static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;

/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];

#if (DIODE_DIRECTION == COL2ROW)
    static void init_cols(void);
    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
    static void unselect_rows(void);
    static void select_row(uint8_t row);
    static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
    static void init_rows(void);
    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
    static void unselect_cols(void);
    static void unselect_col(uint8_t col);
    static void select_col(uint8_t col);
#endif

__attribute__ ((weak))
void matrix_init_kb(void) {
    matrix_init_user();
}

__attribute__ ((weak))
void matrix_scan_kb(void) {
    matrix_scan_user();
}

__attribute__ ((weak))
void matrix_init_user(void) {
}

__attribute__ ((weak))
void matrix_scan_user(void) {
}

inline
uint8_t matrix_rows(void)
{
    return MATRIX_ROWS;
}

inline
uint8_t matrix_cols(void)
{
    return MATRIX_COLS;
}

void matrix_init(void)
{
    debug_enable = true;
    debug_matrix = true;
    debug_mouse = true;
    // initialize row and col
#if (DIODE_DIRECTION == COL2ROW)
    unselect_rows();
    init_cols();
#elif (DIODE_DIRECTION == ROW2COL)
    unselect_cols();
    init_rows();
#endif

    TX_RX_LED_INIT;

    // initialize matrix state: all keys off
    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
        matrix[i] = 0;
        matrix_debouncing[i] = 0;
    }

    matrix_init_quantum();

}

uint8_t _matrix_scan(void)
{
    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
    // Set row, read cols
    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
#       if (DEBOUNCING_DELAY > 0)
            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);

            if (matrix_changed) {
                debouncing = true;
                debouncing_time = timer_read();
                PORTD ^= (1 << 2);
            }

#       else
            read_cols_on_row(matrix+offset, current_row);
#       endif

    }

#elif (DIODE_DIRECTION == ROW2COL)
    // Set col, read rows
    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
#       if (DEBOUNCING_DELAY > 0)
            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
            if (matrix_changed) {
                debouncing = true;
                debouncing_time = timer_read();
            }
#       else
             read_rows_on_col(matrix+offset, current_col);
#       endif

    }
#endif

#   if (DEBOUNCING_DELAY > 0)
        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
                matrix[i+offset] = matrix_debouncing[i+offset];
            }
            debouncing = false;
        }
#   endif

    return 1;
}

#ifdef USE_I2C

// Get rows from other half over i2c
int i2c_transaction(void) {
    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;

    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
    if (err) goto i2c_error;

    // start of matrix stored at 0x00
    err = i2c_master_write(0x00);
    if (err) goto i2c_error;

#ifdef BACKLIGHT_ENABLE
    // Write backlight level for slave to read
    err = i2c_master_write(backlight_config.enable ? backlight_config.level : 0);
#else
    // Write zero, so our byte index is the same
    err = i2c_master_write(0x00);
#endif
    if (err) goto i2c_error;

    // Start read
    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
    if (err) goto i2c_error;

    if (!err) {
        int i;
        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
        }
        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
        i2c_master_stop();
    } else {
i2c_error: // the cable is disconnceted, or something else went wrong
        i2c_reset_state();
        return err;
    }

    return 0;
}

#else // USE_SERIAL

int serial_transaction(void) {
    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;

    if (serial_update_buffers()) {
        return 1;
    }

    for (int i = 0; i < ROWS_PER_HAND; ++i) {
        matrix[slaveOffset+i] = serial_slave_buffer[i];
    }

#ifdef BACKLIGHT_ENABLE
    // Write backlight level for slave to read
    serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0;
#endif
    return 0;
}
#endif

uint8_t matrix_scan(void)
{
    uint8_t ret = _matrix_scan();

#ifdef USE_I2C
    if( i2c_transaction() ) {
#else // USE_SERIAL
    if( serial_transaction() ) {
#endif
        // turn on the indicator led when halves are disconnected
        TXLED1;

        error_count++;

        if (error_count > ERROR_DISCONNECT_COUNT) {
            // reset other half if disconnected
            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
            for (int i = 0; i < ROWS_PER_HAND; ++i) {
                matrix[slaveOffset+i] = 0;
            }
        }
    } else {
        // turn off the indicator led on no error
        TXLED0;
        error_count = 0;
    }
    matrix_scan_quantum();
    return ret;
}

void matrix_slave_scan(void) {
    _matrix_scan();

    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;

#ifdef USE_I2C
#ifdef BACKLIGHT_ENABLE
    // Read backlight level sent from master and update level on slave
    backlight_set(i2c_slave_buffer[0]);
#endif
    for (int i = 0; i < ROWS_PER_HAND; ++i) {
        i2c_slave_buffer[i+1] = matrix[offset+i];
    }
#else // USE_SERIAL
    for (int i = 0; i < ROWS_PER_HAND; ++i) {
        serial_slave_buffer[i] = matrix[offset+i];
    }

#ifdef BACKLIGHT_ENABLE
    // Read backlight level sent from master and update level on slave
    backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
#endif
#endif
}

bool matrix_is_modified(void)
{
    if (debouncing) return false;
    return true;
}

inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
    return (matrix[row] & ((matrix_row_t)1<<col));
}

inline
matrix_row_t matrix_get_row(uint8_t row)
{
    return matrix[row];
}

void matrix_print(void)
{
    print("\nr/c 0123456789ABCDEF\n");
    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
        phex(row); print(": ");
        pbin_reverse16(matrix_get_row(row));
        print("\n");
    }
}

uint8_t matrix_key_count(void)
{
    uint8_t count = 0;
    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
        count += bitpop16(matrix[i]);
    }
    return count;
}

#if (DIODE_DIRECTION == COL2ROW)

static void init_cols(void)
{
    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
        uint8_t pin = col_pins[x];
        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
    }
}

static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
    // Store last value of row prior to reading
    matrix_row_t last_row_value = current_matrix[current_row];

    // Clear data in matrix row
    current_matrix[current_row] = 0;

    // Select row and wait for row selecton to stabilize
    select_row(current_row);
    wait_us(30);

    // For each col...
    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {

        // Select the col pin to read (active low)
        uint8_t pin = col_pins[col_index];
        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));

        // Populate the matrix row with the state of the col pin
        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
    }

    // Unselect row
    unselect_row(current_row);

    return (last_row_value != current_matrix[current_row]);
}

static void select_row(uint8_t row)
{
    uint8_t pin = row_pins[row];
    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}

static void unselect_row(uint8_t row)
{
    uint8_t pin = row_pins[row];
    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
}

static void unselect_rows(void)
{
    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
        uint8_t pin = row_pins[x];
        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
    }
}

#elif (DIODE_DIRECTION == ROW2COL)

static void init_rows(void)
{
    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
        uint8_t pin = row_pins[x];
        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
    }
}

static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
    bool matrix_changed = false;

    // Select col and wait for col selecton to stabilize
    select_col(current_col);
    wait_us(30);

    // For each row...
    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
    {

        // Store last value of row prior to reading
        matrix_row_t last_row_value = current_matrix[row_index];

        // Check row pin state
        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
        {
            // Pin LO, set col bit
            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
        }
        else
        {
            // Pin HI, clear col bit
            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
        }

        // Determine if the matrix changed state
        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
        {
            matrix_changed = true;
        }
    }

    // Unselect col
    unselect_col(current_col);

    return matrix_changed;
}

static void select_col(uint8_t col)
{
    uint8_t pin = col_pins[col];
    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}

static void unselect_col(uint8_t col)
{
    uint8_t pin = col_pins[col];
    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
}

static void unselect_cols(void)
{
    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
        uint8_t pin = col_pins[x];
        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
    }
}

#endif