diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2009-03-04 08:03:13 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2009-03-04 08:03:13 +0000 |
commit | 7e7124e40ba2155c5ee4348701be30d3790edca3 (patch) | |
tree | 7c8d7f6fb75555874b10577e2937e00a3deec284 | |
parent | 5e787a4bb04f8a27f9300077361403adf2e92b3f (diff) | |
download | lufa-7e7124e40ba2155c5ee4348701be30d3790edca3.tar.gz lufa-7e7124e40ba2155c5ee4348701be30d3790edca3.tar.bz2 lufa-7e7124e40ba2155c5ee4348701be30d3790edca3.zip |
Updated makefiles to reflect new dfu-ee programming target invocations (supplied by Opendous, Inc.).
Renamed the ATTR_ALWAYSINLINE function attribute macro to ATTR_ALWAYS_INLINE to match the style of the other function attribute macro names.
Added ATTR_ALWAYS_INLINE attribute to several inlined library functions, to ensure they are inlined in all circumstances.
Cleanups to Endpoint.h and Pipe.h. Added better documentation for the endpoint and pipe interrupts.
41 files changed, 341 insertions, 359 deletions
diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index 5045cc686..1e6491c1e 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -32,18 +32,6 @@ # make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
@@ -527,26 +515,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
- dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index 5a26b7e3e..88c539ca5 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -32,18 +32,6 @@ # make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
@@ -527,27 +515,8 @@ gccversion : # Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
- dfu-programmer $(MCU) reset
+
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile index a815e01b4..8d8636f36 100644 --- a/Bootloaders/TeensyHID/makefile +++ b/Bootloaders/TeensyHID/makefile @@ -32,18 +32,6 @@ # make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
@@ -527,26 +515,6 @@ gccversion : program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- copy $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
- dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
diff --git a/Demos/AudioInput/makefile b/Demos/AudioInput/makefile index 51f6cc5b8..697442b5e 100644 --- a/Demos/AudioInput/makefile +++ b/Demos/AudioInput/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/AudioOutput/makefile b/Demos/AudioOutput/makefile index 6c2ee3230..a84a4b58b 100644 --- a/Demos/AudioOutput/makefile +++ b/Demos/AudioOutput/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/BluetoothHost/BluetoothHost.c b/Demos/BluetoothHost/BluetoothHost.c index 0f9eb4a9e..50bd1a8fe 100644 --- a/Demos/BluetoothHost/BluetoothHost.c +++ b/Demos/BluetoothHost/BluetoothHost.c @@ -62,9 +62,9 @@ TASK_LIST Bluetooth_Device_t Bluetooth_DeviceConfiguration =
{
- Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM),
+ Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM),
PINCode: "0000",
- Name: "LUFA Bluetooth Demo"
+ Name: "LUFA Bluetooth Demo"
};
diff --git a/Demos/BluetoothHost/makefile b/Demos/BluetoothHost/makefile index 189c84e1c..0adac4bcd 100644 --- a/Demos/BluetoothHost/makefile +++ b/Demos/BluetoothHost/makefile @@ -540,10 +540,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -677,15 +677,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -698,11 +699,15 @@ clean_list: $(REMOVE) $(SRC:.c=.i)
$(REMOVEDIR) .dep
+
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
+clean_doxygen:
+ rm -rf Documentation
+
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
@@ -716,4 +721,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/CDC/makefile b/Demos/CDC/makefile index 9b0e5bdd6..8b19d1dee 100644 --- a/Demos/CDC/makefile +++ b/Demos/CDC/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/CDCHost/makefile b/Demos/CDCHost/makefile index d1e4cb990..98700824c 100644 --- a/Demos/CDCHost/makefile +++ b/Demos/CDCHost/makefile @@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/DualCDC/makefile b/Demos/DualCDC/makefile index 01ab60997..9313b8008 100644 --- a/Demos/DualCDC/makefile +++ b/Demos/DualCDC/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/Joystick/makefile b/Demos/Joystick/makefile index a29a2d380..6638c108c 100644 --- a/Demos/Joystick/makefile +++ b/Demos/Joystick/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -615,6 +615,8 @@ extcoff: $(TARGET).elf @echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
+
+
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
@@ -674,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -712,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/Keyboard/makefile b/Demos/Keyboard/makefile index 681f729e2..db138609a 100644 --- a/Demos/Keyboard/makefile +++ b/Demos/Keyboard/makefile @@ -536,10 +536,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -678,10 +678,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -716,4 +717,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/KeyboardFullInt/makefile b/Demos/KeyboardFullInt/makefile index b1f7f890f..a7ebbf9fd 100644 --- a/Demos/KeyboardFullInt/makefile +++ b/Demos/KeyboardFullInt/makefile @@ -533,10 +533,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -675,10 +675,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -713,4 +714,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/KeyboardHost/makefile b/Demos/KeyboardHost/makefile index 7ff737e51..6ef376b33 100644 --- a/Demos/KeyboardHost/makefile +++ b/Demos/KeyboardHost/makefile @@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/KeyboardHostViaInt/makefile b/Demos/KeyboardHostViaInt/makefile index a8b3f23e6..813ed690c 100644 --- a/Demos/KeyboardHostViaInt/makefile +++ b/Demos/KeyboardHostViaInt/makefile @@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/KeyboardHostWithParser/makefile b/Demos/KeyboardHostWithParser/makefile index ea768b4e4..41d8d9f66 100644 --- a/Demos/KeyboardHostWithParser/makefile +++ b/Demos/KeyboardHostWithParser/makefile @@ -539,10 +539,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,15 +676,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -719,4 +720,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/KeyboardMouse/makefile b/Demos/KeyboardMouse/makefile index 7c26d2cf2..b16146c28 100644 --- a/Demos/KeyboardMouse/makefile +++ b/Demos/KeyboardMouse/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/KeyboardViaInt/makefile b/Demos/KeyboardViaInt/makefile index ff225b35c..5b84843b6 100644 --- a/Demos/KeyboardViaInt/makefile +++ b/Demos/KeyboardViaInt/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MIDI/makefile b/Demos/MIDI/makefile index c5cc048d8..7d9f24a05 100644 --- a/Demos/MIDI/makefile +++ b/Demos/MIDI/makefile @@ -534,10 +534,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,10 +676,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -714,4 +715,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MassStorage/makefile b/Demos/MassStorage/makefile index 2f17228af..284d2aa28 100644 --- a/Demos/MassStorage/makefile +++ b/Demos/MassStorage/makefile @@ -536,10 +536,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -678,10 +678,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -716,4 +717,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MassStorageHost/makefile b/Demos/MassStorageHost/makefile index 2608b76bb..322d76003 100644 --- a/Demos/MassStorageHost/makefile +++ b/Demos/MassStorageHost/makefile @@ -539,10 +539,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -676,15 +676,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -719,4 +720,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/Mouse/makefile b/Demos/Mouse/makefile index 0f20dca63..4886e8926 100644 --- a/Demos/Mouse/makefile +++ b/Demos/Mouse/makefile @@ -535,10 +535,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -677,10 +677,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -715,4 +716,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MouseFullInt/makefile b/Demos/MouseFullInt/makefile index fe8551698..0a7e684d5 100644 --- a/Demos/MouseFullInt/makefile +++ b/Demos/MouseFullInt/makefile @@ -535,10 +535,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -677,10 +677,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -715,4 +716,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MouseHost/makefile b/Demos/MouseHost/makefile index 6e8688f10..f2bb61ad2 100644 --- a/Demos/MouseHost/makefile +++ b/Demos/MouseHost/makefile @@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -679,10 +679,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MouseHostViaInt/makefile b/Demos/MouseHostViaInt/makefile index f2b86e12f..45b53c6b3 100644 --- a/Demos/MouseHostViaInt/makefile +++ b/Demos/MouseHostViaInt/makefile @@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -679,10 +679,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MouseHostWithParser/makefile b/Demos/MouseHostWithParser/makefile index 3eec44b36..c815185f2 100644 --- a/Demos/MouseHostWithParser/makefile +++ b/Demos/MouseHostWithParser/makefile @@ -539,10 +539,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -681,10 +681,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -719,4 +720,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/MouseViaInt/makefile b/Demos/MouseViaInt/makefile index 571d1f606..892fe4417 100644 --- a/Demos/MouseViaInt/makefile +++ b/Demos/MouseViaInt/makefile @@ -535,10 +535,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -677,10 +677,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -715,4 +716,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/RNDISEthernet/makefile b/Demos/RNDISEthernet/makefile index ba1588af6..18f1fe4a8 100644 --- a/Demos/RNDISEthernet/makefile +++ b/Demos/RNDISEthernet/makefile @@ -548,10 +548,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -690,10 +690,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -728,4 +729,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/StillImageHost/makefile b/Demos/StillImageHost/makefile index 63e328ac4..8387c8161 100644 --- a/Demos/StillImageHost/makefile +++ b/Demos/StillImageHost/makefile @@ -537,10 +537,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -674,15 +674,16 @@ $(OBJDIR)/%.o : %.S $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-## Target: clean project.
+# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -717,4 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/TestApp/makefile b/Demos/TestApp/makefile index befc0e6fc..e3a3ba935 100644 --- a/Demos/TestApp/makefile +++ b/Demos/TestApp/makefile @@ -542,10 +542,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -684,10 +684,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -722,4 +723,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Demos/USBtoSerial/makefile b/Demos/USBtoSerial/makefile index 6703102bb..0c4aa87e8 100644 --- a/Demos/USBtoSerial/makefile +++ b/Demos/USBtoSerial/makefile @@ -536,10 +536,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -678,10 +678,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -716,4 +717,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt index b89c6e8b9..f699507dd 100644 --- a/LUFA/ChangeLog.txt +++ b/LUFA/ChangeLog.txt @@ -8,7 +8,7 @@ *
* \section Sec_ChangeLogXXXXXX Version XXXXXX
*
- * - Added new BluetoothHost demo
+ * - Added new incomplete BluetoothHost demo
* - Changed AVRISP Programmer descriptors to use a newly allocated 0x204F PID value
* - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor
* - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations
@@ -26,6 +26,8 @@ * - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with
* badly designed hosts or devices which greatly exceed the USB specification limits
* - Mass Storage Host demo now uses a USB_STREAM_TIMEOUT_MS of two seconds to maintain compatibility with poorly designed devices
+ * - Function attribute ATTR_ALWAYSINLINE renamed to ATTR_ALWAYS_INLINE to match other function attribute macro naming conventions
+ * - Added ATTR_ALWAYS_INLINE attribute to several key inlined library components, to ensure they are inlined in all circumstances
*
* \section Sec_ChangeLog090209 Version 090209
*
diff --git a/LUFA/Common/FunctionAttributes.h b/LUFA/Common/FunctionAttributes.h index 16503bb55..daa6c4a26 100644 --- a/LUFA/Common/FunctionAttributes.h +++ b/LUFA/Common/FunctionAttributes.h @@ -84,7 +84,7 @@ /** Forces the compiler to inline the specified function. When applied, the given function will be
* inlined under all circumstances.
*/
- #define ATTR_ALWAYSINLINE __attribute__ ((always_inline))
+ #define ATTR_ALWAYS_INLINE __attribute__ ((always_inline))
/** Indicates that the specified function is pure, in that it has no side-effects other than global
* or parameter variable access.
diff --git a/LUFA/Drivers/AT90USBXXX/SPI.h b/LUFA/Drivers/AT90USBXXX/SPI.h index 0b333a804..2cfa52322 100644 --- a/LUFA/Drivers/AT90USBXXX/SPI.h +++ b/LUFA/Drivers/AT90USBXXX/SPI.h @@ -98,7 +98,7 @@ *
* \return Response byte from the attached SPI device
*/
- static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYSINLINE;
+ static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline uint8_t SPI_TransferByte(const uint8_t Byte)
{
SPDR = Byte;
@@ -111,7 +111,7 @@ *
* \param Byte Byte to send through the SPI interface
*/
- static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYSINLINE;
+ static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void SPI_SendByte(const uint8_t Byte)
{
SPDR = Byte;
@@ -123,7 +123,7 @@ *
* \return The response byte from the attached SPI device
*/
- static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYSINLINE ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
static inline uint8_t SPI_ReceiveByte(void)
{
SPDR = 0x00;
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index 08deb50d4..2b682d7c9 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -108,7 +108,7 @@ *
* \return Last response byte from the dataflash
*/
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYSINLINE;
+ static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
{
return SPI_TransferByte(Byte);
@@ -118,7 +118,7 @@ *
* \param Byte of data to send to the dataflash
*/
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYSINLINE;
+ static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void Dataflash_SendByte(const uint8_t Byte)
{
SPI_SendByte(Byte);
@@ -128,7 +128,7 @@ *
* \return Last response byte from the dataflash
*/
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYSINLINE ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
static inline uint8_t Dataflash_ReceiveByte(void)
{
return SPI_ReceiveByte();
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 5f3170416..d1ad1315a 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -58,69 +58,69 @@ /** Endpoint data direction mask for Endpoint_ConfigureEndpoint(). This indicates that the endpoint
* should be initialized in the OUT direction - i.e. data flows from host to device.
*/
- #define ENDPOINT_DIR_OUT 0
+ #define ENDPOINT_DIR_OUT (0 << EPDIR)
/** Endpoint data direction mask for Endpoint_ConfigureEndpoint(). This indicates that the endpoint
* should be initialized in the IN direction - i.e. data flows from device to host.
*/
- #define ENDPOINT_DIR_IN (1 << EPDIR)
+ #define ENDPOINT_DIR_IN (1 << EPDIR)
/** Mask for the bank mode selection for the Endpoint_ConfigureEndpoint() macro. This indicates
* that the endpoint should have one single bank, which requires less USB FIFO memory but results
* in slower transfers as only one USB device (the AVR or the host) can access the endpoint's
* bank at the one time.
*/
- #define ENDPOINT_BANK_SINGLE 0
+ #define ENDPOINT_BANK_SINGLE (0 << EPBK0)
/** Mask for the bank mode selection for the Endpoint_ConfigureEndpoint() macro. This indicates
* that the endpoint should have two banks, which requires more USB FIFO memory but results
* in faster transfers as one USB device (the AVR or the host) can access one bank while the other
* accesses the second bank.
*/
- #define ENDPOINT_BANK_DOUBLE (1 << EPBK0)
+ #define ENDPOINT_BANK_DOUBLE (1 << EPBK0)
/** Endpoint address for the default control endpoint, which always resides in address 0. This is
* defined for convenience to give more readable code when used with the endpoint macros.
*/
- #define ENDPOINT_CONTROLEP 0
+ #define ENDPOINT_CONTROLEP 0
/** Default size of the default control endpoint's bank, until altered by the Endpoint0Size value
* in the device descriptor. Not available if the FIXED_CONTROL_ENDPOINT_SIZE token is defined.
*/
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
+ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
#endif
/** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
* numerical address in the device.
*/
- #define ENDPOINT_EPNUM_MASK 0b111
+ #define ENDPOINT_EPNUM_MASK 0b111
/** Endpoint bank size mask, for masking against endpoint addresses to retrieve the endpoint's
* bank size in the device.
*/
- #define ENDPOINT_EPSIZE_MASK 0x7FF
+ #define ENDPOINT_EPSIZE_MASK 0x7FF
/** Maximum size in bytes of a given endpoint.
*
* \param n Endpoint number, a value between 0 and (ENDPOINT_TOTAL_ENDPOINTS - 1)
*/
- #define ENDPOINT_MAX_SIZE(n) _ENDPOINT_GET_MAXSIZE(n)
+ #define ENDPOINT_MAX_SIZE(n) _ENDPOINT_GET_MAXSIZE(n)
/** Indicates if the given endpoint supports double banking.
*
* \param n Endpoint number, a value between 0 and (ENDPOINT_TOTAL_ENDPOINTS - 1)
*/
- #define ENDPOINT_DOUBLEBANK_SUPPORTED(n) _ENDPOINT_GET_DOUBLEBANK(n)
+ #define ENDPOINT_DOUBLEBANK_SUPPORTED(n) _ENDPOINT_GET_DOUBLEBANK(n)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)
/** Total number of endpoints (including the default control endpoint at address 0) which may
* be used in the device. Different USB AVR models support different amounts of endpoints,
* this value reflects the maximum number of endpoints for the currently selected AVR model.
*/
- #define ENDPOINT_TOTAL_ENDPOINTS 7
+ #define ENDPOINT_TOTAL_ENDPOINTS 7
#else
- #define ENDPOINT_TOTAL_ENDPOINTS 5
+ #define ENDPOINT_TOTAL_ENDPOINTS 5
#endif
/** Interrupt definition for the endpoint SETUP interrupt (for CONTROL type endpoints). Should be
@@ -128,8 +128,13 @@ *
* This interrupt will fire if enabled on a CONTROL type endpoint if a new control packet is
* received from the host.
+ *
+ * \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the
+ * endpoint is selected), and will fire the common endpoint interrupt vector.
+ *
+ * \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
- #define ENDPOINT_INT_SETUP UEIENX, (1 << RXSTPE), UEINTX, (1 << RXSTPI)
+ #define ENDPOINT_INT_SETUP UEIENX, (1 << RXSTPE), UEINTX, (1 << RXSTPI)
/** Interrupt definition for the endpoint IN interrupt (for INTERRUPT type endpoints). Should be
* used with the USB_INT_* macros located in USBInterrupt.h.
@@ -137,8 +142,13 @@ * This interrupt will fire if enabled on an INTERRUPT type endpoint if a the endpoint interrupt
* period has elapsed and the endpoint is ready for a new packet to be written to its FIFO buffer
* (if required).
+ *
+ * \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the
+ * endpoint is selected), and will fire the common endpoint interrupt vector.
+ *
+ * \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
- #define ENDPOINT_INT_IN UEIENX, (1 << TXINE) , UEINTX, (1 << TXINI)
+ #define ENDPOINT_INT_IN UEIENX, (1 << TXINE) , UEINTX, (1 << TXINI)
/** Interrupt definition for the endpoint OUT interrupt (for INTERRUPT type endpoints). Should be
* used with the USB_INT_* macros located in USBInterrupt.h.
@@ -146,21 +156,26 @@ * This interrupt will fire if enabled on an INTERRUPT type endpoint if a the endpoint interrupt
* period has elapsed and the endpoint is ready for a packet from the host to be read from its
* FIFO buffer (if received).
+ *
+ * \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the
+ * endpoint is selected), and will fire the common endpoint interrupt vector.
+ *
+ * \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
- #define ENDPOINT_INT_OUT UEIENX, (1 << RXOUTE), UEINTX, (1 << RXOUTI)
+ #define ENDPOINT_INT_OUT UEIENX, (1 << RXOUTE), UEINTX, (1 << RXOUTI)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)
/** Indicates the number of bytes currently stored in the current endpoint's selected bank. */
- #define Endpoint_BytesInEndpoint() UEBCX
+ #define Endpoint_BytesInEndpoint() UEBCX
#else
- #define Endpoint_BytesInEndpoint() UEBCLX
+ #define Endpoint_BytesInEndpoint() UEBCLX
#endif
/** Returns the endpoint address of the currently selected endpoint. This is typically used to save
* the currently selected endpoint number so that it can be restored after another endpoint has
* been manipulated.
*/
- #define Endpoint_GetCurrentEndpoint() (UENUM & ENDPOINT_EPNUM_MASK)
+ #define Endpoint_GetCurrentEndpoint() (UENUM & ENDPOINT_EPNUM_MASK)
/** Selects the given endpoint number. If the address from the device descriptors is used, the
* value should be masked with the ENDPOINT_EPNUM_MASK constant to extract only the endpoint
@@ -169,12 +184,12 @@ * Any endpoint operations which do not require the endpoint number to be indicated will operate on
* the currently selected endpoint.
*/
- #define Endpoint_SelectEndpoint(epnum) MACROS{ UENUM = epnum; }MACROE
+ #define Endpoint_SelectEndpoint(epnum) MACROS{ UENUM = epnum; }MACROE
/** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
* In and Out pointers to the bank's contents.
*/
- #define Endpoint_ResetFIFO(epnum) MACROS{ UERST = (1 << epnum); UERST = 0; }MACROE
+ #define Endpoint_ResetFIFO(epnum) MACROS{ UERST = (1 << epnum); UERST = 0; }MACROE
/** Enables the currently selected endpoint so that data can be sent and received through it to
* and from a host.
@@ -182,15 +197,15 @@ * \note Endpoints must first be configured properly rather than just being enabled via the
* Endpoint_ConfigureEndpoint() macro, which calls Endpoint_EnableEndpoint() automatically.
*/
- #define Endpoint_EnableEndpoint() MACROS{ UECONX |= (1 << EPEN); }MACROE
+ #define Endpoint_EnableEndpoint() MACROS{ UECONX |= (1 << EPEN); }MACROE
/** Disables the currently selected endpoint so that data cannot be sent and received through it
* to and from a host.
*/
- #define Endpoint_DisableEndpoint() MACROS{ UECONX &= ~(1 << EPEN); }MACROE
+ #define Endpoint_DisableEndpoint() MACROS{ UECONX &= ~(1 << EPEN); }MACROE
/** Returns true if the currently selected endpoint is enabled, false otherwise. */
- #define Endpoint_IsEnabled() ((UECONX & (1 << EPEN)) ? true : false)
+ #define Endpoint_IsEnabled() ((UECONX & (1 << EPEN)) ? true : false)
/** Returns true if the currently selected endpoint may be read from (if data is waiting in the endpoint
* bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an
@@ -198,53 +213,53 @@ * the endpoint is an OUT direction and no packet has been received, or if the endpoint is an IN
* direction and the endpoint bank is full.
*/
- #define Endpoint_ReadWriteAllowed() ((UEINTX & (1 << RWAL)) ? true : false)
+ #define Endpoint_ReadWriteAllowed() ((UEINTX & (1 << RWAL)) ? true : false)
/** Returns true if the currently selected endpoint is configured, false otherwise. */
- #define Endpoint_IsConfigured() ((UESTA0X & (1 << CFGOK)) ? true : false)
+ #define Endpoint_IsConfigured() ((UESTA0X & (1 << CFGOK)) ? true : false)
/** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their
* interrupt duration has elapsed. Which endpoints have interrupted can be determined by
* masking the return value against (1 << {Endpoint Number}).
*/
- #define Endpoint_GetEndpointInterrupts() UEINT
+ #define Endpoint_GetEndpointInterrupts() UEINT
/** Clears the endpoint interrupt flag. This clears the specified endpoint number's interrupt
* mask in the endpoint interrupt flag register.
*/
- #define Endpoint_ClearEndpointInterrupt(n) MACROS{ UEINT &= ~(1 << n); }MACROE
+ #define Endpoint_ClearEndpointInterrupt(n) MACROS{ UEINT &= ~(1 << n); }MACROE
/** Returns true if the specified endpoint number has interrupted (valid only for INTERRUPT type
* endpoints), false otherwise.
*/
- #define Endpoint_HasEndpointInterrupted(n) ((UEINT & (1 << n)) ? true : false)
+ #define Endpoint_HasEndpointInterrupted(n) ((UEINT & (1 << n)) ? true : false)
/** Clears the currently selected endpoint bank, and switches to the alternate bank if the currently
* selected endpoint is dual-banked. When cleared, this either frees the bank up for the next packet
* from the host (if the endpoint is of the OUT direction) or sends the packet contents to the host
* (if the endpoint is of the IN direction).
*/
- #define Endpoint_ClearCurrentBank() MACROS{ UEINTX &= ~(1 << FIFOCON); }MACROE
+ #define Endpoint_ClearCurrentBank() MACROS{ UEINTX &= ~(1 << FIFOCON); }MACROE
/** Returns true if the current CONTROL type endpoint is ready for an IN packet, false otherwise. */
- #define Endpoint_IsSetupINReady() ((UEINTX & (1 << TXINI)) ? true : false)
+ #define Endpoint_IsSetupINReady() ((UEINTX & (1 << TXINI)) ? true : false)
/** Returns true if the current CONTROL type endpoint is ready for an OUT packet, false otherwise. */
- #define Endpoint_IsSetupOUTReceived() ((UEINTX & (1 << RXOUTI)) ? true : false)
+ #define Endpoint_IsSetupOUTReceived() ((UEINTX & (1 << RXOUTI)) ? true : false)
/** Returns true if the current CONTROL type endpoint is ready for a SETUP packet, false otherwise. */
- #define Endpoint_IsSetupReceived() ((UEINTX & (1 << RXSTPI)) ? true : false)
+ #define Endpoint_IsSetupReceived() ((UEINTX & (1 << RXSTPI)) ? true : false)
/** Clears a received SETUP packet on the currently selected CONTROL type endpoint. */
- #define Endpoint_ClearSetupReceived() MACROS{ UEINTX &= ~(1 << RXSTPI); }MACROE
+ #define Endpoint_ClearSetupReceived() MACROS{ UEINTX &= ~(1 << RXSTPI); }MACROE
/** Sends an IN packet to the host on the currently selected CONTROL type endpoint. */
- #define Endpoint_ClearSetupIN() MACROS{ UEINTX &= ~(1 << TXINI); }MACROE
+ #define Endpoint_ClearSetupIN() MACROS{ UEINTX &= ~(1 << TXINI); }MACROE
/** Acknowedges an OUT packet to the host on the currently selected CONTROL type endpoint, freeing
* up the endpoint for the next packet.
*/
- #define Endpoint_ClearSetupOUT() MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
+ #define Endpoint_ClearSetupOUT() MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
/** Stalls the current endpoint, indicating to the host that a logical problem occured with the
* indicated endpoint and that the current transfer sequence should be aborted. This provides a
@@ -255,16 +270,16 @@ * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
* endpoint.
*/
- #define Endpoint_StallTransaction() MACROS{ UECONX |= (1 << STALLRQ); }MACROE
+ #define Endpoint_StallTransaction() MACROS{ UECONX |= (1 << STALLRQ); }MACROE
/** Clears the stall on the currently selected endpoint. */
- #define Endpoint_ClearStall() MACROS{ UECONX |= (1 << STALLRQC); }MACROE
+ #define Endpoint_ClearStall() MACROS{ UECONX |= (1 << STALLRQC); }MACROE
/** Returns true if the currently selected endpoint is stalled, false othewise. */
- #define Endpoint_IsStalled() ((UECONX & (1 << STALLRQ)) ? true : false)
+ #define Endpoint_IsStalled() ((UECONX & (1 << STALLRQ)) ? true : false)
/** Resets the data toggle of the currently selected endpoint. */
- #define Endpoint_ResetDataToggle() MACROS{ UECONX |= (1 << RSTDT); }MACROE
+ #define Endpoint_ResetDataToggle() MACROS{ UECONX |= (1 << RSTDT); }MACROE
/* Enums: */
/** Enum for the possible error return codes of the Endpoint_WaitUntilReady function */
@@ -311,19 +326,21 @@ /* Inline Functions: */
/** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints. */
- static inline uint8_t Endpoint_Read_Byte(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t Endpoint_Read_Byte(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint8_t Endpoint_Read_Byte(void)
{
return UEDATX;
}
/** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints. */
+ static inline void Endpoint_Write_Byte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Write_Byte(const uint8_t Byte)
{
UEDATX = Byte;
}
/** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints. */
+ static inline void Endpoint_Discard_Byte(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_Byte(void)
{
uint8_t Dummy;
@@ -334,7 +351,7 @@ /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
* direction endpoints.
*/
- static inline uint16_t Endpoint_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint16_t Endpoint_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint16_t Endpoint_Read_Word_LE(void)
{
uint16_t Data;
@@ -348,7 +365,7 @@ /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
* direction endpoints.
*/
- static inline uint16_t Endpoint_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint16_t Endpoint_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint16_t Endpoint_Read_Word_BE(void)
{
uint16_t Data;
@@ -362,6 +379,7 @@ /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
* direction endpoints.
*/
+ static inline void Endpoint_Write_Word_LE(const uint16_t Word) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Write_Word_LE(const uint16_t Word)
{
UEDATX = (Word & 0xFF);
@@ -371,6 +389,7 @@ /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
* direction endpoints.
*/
+ static inline void Endpoint_Write_Word_BE(const uint16_t Word) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Write_Word_BE(const uint16_t Word)
{
UEDATX = (Word >> 8);
@@ -378,6 +397,7 @@ }
/** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints. */
+ static inline void Endpoint_Discard_Word(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_Word(void)
{
uint8_t Dummy;
@@ -389,7 +409,7 @@ /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
* direction endpoints.
*/
- static inline uint32_t Endpoint_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint32_t Endpoint_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint32_t Endpoint_Read_DWord_LE(void)
{
union
@@ -409,7 +429,7 @@ /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
* direction endpoints.
*/
- static inline uint32_t Endpoint_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint32_t Endpoint_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint32_t Endpoint_Read_DWord_BE(void)
{
union
@@ -429,22 +449,29 @@ /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
* direction endpoints.
*/
+ static inline void Endpoint_Write_DWord_LE(const uint32_t DWord) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Write_DWord_LE(const uint32_t DWord)
{
- Endpoint_Write_Word_LE(DWord);
- Endpoint_Write_Word_LE(DWord >> 16);
+ UEDATX = (DWord & 0xFF);
+ UEDATX = (DWord >> 8);
+ UEDATX = (DWord >> 16);
+ UEDATX = (DWord >> 24);
}
/** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
* direction endpoints.
*/
+ static inline void Endpoint_Write_DWord_BE(const uint32_t DWord) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Write_DWord_BE(const uint32_t DWord)
{
- Endpoint_Write_Word_BE(DWord >> 16);
- Endpoint_Write_Word_BE(DWord);
+ UEDATX = (DWord >> 24);
+ UEDATX = (DWord >> 16);
+ UEDATX = (DWord >> 8);
+ UEDATX = (DWord & 0xFF);
}
/** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints. */
+ static inline void Endpoint_Discard_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_DWord(void)
{
uint8_t Dummy;
@@ -810,7 +837,7 @@ bool Endpoint_ConfigureEndpointStatic(const uint8_t Number, const uint8_t UECFG0XData, const uint8_t UECFG1XData);
/* Inline Functions: */
- static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYSINLINE;
+ static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE;
static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes)
{
if (Bytes <= 8)
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index a1f28ccc2..f7d10bc1d 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -56,85 +56,85 @@ /* Public Interface - May be used in end-application: */
/* Macros: */
/** Mask for Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */
- #define PIPE_ERRORFLAG_CRC16 (1 << 4)
+ #define PIPE_ERRORFLAG_CRC16 (1 << 4)
/** Mask for Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */
- #define PIPE_ERRORFLAG_TIMEOUT (1 << 3)
+ #define PIPE_ERRORFLAG_TIMEOUT (1 << 3)
/** Mask for Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */
- #define PIPE_ERRORFLAG_PID (1 << 2)
+ #define PIPE_ERRORFLAG_PID (1 << 2)
/** Mask for Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */
- #define PIPE_ERRORFLAG_DATAPID (1 << 1)
+ #define PIPE_ERRORFLAG_DATAPID (1 << 1)
/** Mask for Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
- #define PIPE_ERRORFLAG_DATATGL (1 << 0)
+ #define PIPE_ERRORFLAG_DATATGL (1 << 0)
/** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),
* which will trigger a control request on the attached device when data is written to the pipe.
*/
- #define PIPE_TOKEN_SETUP (0b00 << PTOKEN0)
+ #define PIPE_TOKEN_SETUP (0b00 << PTOKEN0)
/** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),
* indicating that the pipe data will flow from device to host.
*/
- #define PIPE_TOKEN_IN (0b01 << PTOKEN0)
+ #define PIPE_TOKEN_IN (0b01 << PTOKEN0)
/** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),
* indicating that the pipe data will flow from host to device.
*/
- #define PIPE_TOKEN_OUT (0b10 << PTOKEN0)
+ #define PIPE_TOKEN_OUT (0b10 << PTOKEN0)
/** Mask for the bank mode selection for the Pipe_ConfigurePipe() macro. This indicates that the pipe
* should have one single bank, which requires less USB FIFO memory but results in slower transfers as
* only one USB device (the AVR or the attached device) can access the pipe's bank at the one time.
*/
- #define PIPE_BANK_SINGLE 0
+ #define PIPE_BANK_SINGLE (0 << EPBK0)
/** Mask for the bank mode selection for the Pipe_ConfigurePipe() macro. This indicates that the pipe
* should have two banks, which requires more USB FIFO memory but results in faster transfers as one
* USB device (the AVR or the attached device) can access one bank while the other accesses the second
* bank.
*/
- #define PIPE_BANK_DOUBLE (1 << EPBK0)
+ #define PIPE_BANK_DOUBLE (1 << EPBK0)
/** Pipe address for the default control pipe, which always resides in address 0. This is
* defined for convenience to give more readable code when used with the pipe macros.
*/
- #define PIPE_CONTROLPIPE 0
+ #define PIPE_CONTROLPIPE 0
/** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
* in the device descriptor of the attached device.
*/
- #define PIPE_CONTROLPIPE_DEFAULT_SIZE 8
+ #define PIPE_CONTROLPIPE_DEFAULT_SIZE 8
/** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address
* in the device.
*/
- #define PIPE_PIPENUM_MASK 0x07
+ #define PIPE_PIPENUM_MASK 0x07
/** Total number of pipes (including the default control pipe at address 0) which may be used in
* the device. Different USB AVR models support different amounts of pipes, this value reflects
* the maximum number of pipes for the currently selected AVR model.
*/
- #define PIPE_TOTAL_PIPES 7
+ #define PIPE_TOTAL_PIPES 7
/** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR
* model supports the largest bank size possible on the device; different pipe numbers support
* different maximum bank sizes. This value reflects the largest possible bank of any pipe on the
* currently selected USB AVR model.
*/
- #define PIPE_MAX_SIZE 256
+ #define PIPE_MAX_SIZE 256
/** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
* numerical address in the attached device.
*/
- #define PIPE_EPNUM_MASK 0x07
+ #define PIPE_EPNUM_MASK 0x07
/** Endpoint bank size mask, for masking against endpoint addresses to retrieve the endpoint's
* bank size in the attached device.
*/
- #define PIPE_EPSIZE_MASK 0x7FF
+ #define PIPE_EPSIZE_MASK 0x7FF
/** Interrupt definition for the pipe IN interrupt (for INTERRUPT type pipes). Should be used with
* the USB_INT_* macros located in USBInterrupt.h.
@@ -143,12 +143,12 @@ * elapsed and the pipe is ready for the next packet from the attached device to be read out from its
* FIFO buffer (if received).
*
- * This interrupt must be enabled on *each* pipe which requires it (after the pipe is selected), and
- * will fire the common pipe interrupt vector.
+ * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
+ * is selected), and will fire the common pipe interrupt vector.
*
* \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
- #define PIPE_INT_IN UPIENX, (1 << RXINE) , UPINTX, (1 << RXINI)
+ #define PIPE_INT_IN UPIENX, (1 << RXINE) , UPINTX, (1 << RXINI)
/** Interrupt definition for the pipe OUT interrupt (for INTERRUPT type pipes). Should be used with
* the USB_INT_* macros located in USBInterrupt.h.
@@ -157,11 +157,12 @@ * has elapsed and the pipe is ready for a packet to be written to the pipe's FIFO buffer and sent
* to the attached device (if required).
*
- * This interrupt must be enabled on *each* pipe which requires it (after the pipe is selected), and
- * will fire the common pipe interrupt vector.
+ * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
+ * is selected), and will fire the common pipe interrupt vector.
*
- * \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector. */
- #define PIPE_INT_OUT UPIENX, (1 << TXOUTE), UPINTX, (1 << TXOUTI)
+ * \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
+ */
+ #define PIPE_INT_OUT UPIENX, (1 << TXOUTE), UPINTX, (1 << TXOUTI)
/** Interrupt definition for the pipe SETUP bank ready interrupt (for CONTROL type pipes). Should be
* used with the USB_INT_* macros located in USBInterrupt.h.
@@ -169,12 +170,12 @@ * This interrupt will fire if enabled on an CONTROL type pipe when the pipe is ready for a new
* control request.
*
- * This interrupt must be enabled on *each* pipe which requires it (after the pipe is selected), and
- * will fire the common pipe interrupt vector.
+ * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
+ * is selected), and will fire the common pipe interrupt vector.
*
* \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
- #define PIPE_INT_SETUP UPIENX, (1 << TXSTPE) , UPINTX, (1 << TXSTPI)
+ #define PIPE_INT_SETUP UPIENX, (1 << TXSTPE) , UPINTX, (1 << TXSTPI)
/** Interrupt definition for the pipe error interrupt. Should be used with the USB_INT_* macros
* located in USBInterrupt.h.
@@ -182,14 +183,14 @@ * This interrupt will fire if enabled on a particular pipe if an error occurs on that pipe, such
* as a CRC mismatch error.
*
- * This interrupt must be enabled on *each* pipe which requires it (after the pipe is selected), and
- * will fire the common pipe interrupt vector.
+ * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
+ * is selected), and will fire the common pipe interrupt vector.
*
* \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*
* \see Pipe_GetErrorFlags() for more information on the pipe errors.
*/
- #define PIPE_INT_ERROR UPIENX, (1 << PERRE), UPINTX, (1 << PERRI)
+ #define PIPE_INT_ERROR UPIENX, (1 << PERRE), UPINTX, (1 << PERRI)
/** Interrupt definition for the pipe NAK received interrupt. Should be used with the USB_INT_* macros
* located in USBInterrupt.h.
@@ -197,14 +198,14 @@ * This interrupt will fire if enabled on a particular pipe if an attached device returns a NAK in
* response to a sent packet.
*
- * This interrupt must be enabled on *each* pipe which requires it (after the pipe is selected), and
- * will fire the common pipe interrupt vector.
+ * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
+ * is selected), and will fire the common pipe interrupt vector.
*
* \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*
* \see Pipe_IsNAKReceived() for more information on pipe NAKs.
*/
- #define PIPE_INT_NAK UPIENX, (1 << NAKEDE), UPINTX, (1 << NAKEDI)
+ #define PIPE_INT_NAK UPIENX, (1 << NAKEDE), UPINTX, (1 << NAKEDI)
/** Interrupt definition for the pipe STALL received interrupt. Should be used with the USB_INT_* macros
* located in USBInterrupt.h.
@@ -212,28 +213,28 @@ * This interrupt will fire if enabled on a particular pipe if an attached device returns a STALL on the
* currently selected pipe. This will also fire if the pipe is an isochronous pipe and a CRC error occurs.
*
- * This interrupt must be enabled on *each* pipe which requires it (after the pipe is selected), and
- * will fire the common pipe interrupt vector.
+ * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
+ * is selected), and will fire the common pipe interrupt vector.
*
* \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
- #define PIPE_INT_STALL UPIENX, (1 << RXSTALLE), UPINTX, (1 << RXSTALLI)
+ #define PIPE_INT_STALL UPIENX, (1 << RXSTALLE), UPINTX, (1 << RXSTALLI)
/** Indicates the number of bytes currently stored in the current pipe's selected bank. */
- #define Pipe_BytesInPipe() UPBCX
+ #define Pipe_BytesInPipe() UPBCX
/** Resets the desired pipe, including the pipe banks and flags. */
- #define Pipe_ResetPipe(pipenum) MACROS{ UPRST = (1 << pipenum); UPRST = 0; }MACROE
+ #define Pipe_ResetPipe(pipenum) MACROS{ UPRST = (1 << pipenum); UPRST = 0; }MACROE
/** Selects the given pipe number. Any pipe operations which do not require the pipe number to be
* indicated will operate on the currently selected pipe.
*/
- #define Pipe_SelectPipe(pipenum) MACROS{ UPNUM = pipenum; }MACROE
+ #define Pipe_SelectPipe(pipenum) MACROS{ UPNUM = pipenum; }MACROE
/** Returns the pipe address of the currently selected pipe. This is typically used to save the
* currently selected pipe number so that it can be restored after another pipe has been manipulated.
*/
- #define Pipe_GetCurrentPipe() (UPNUM & PIPE_PIPENUM_MASK)
+ #define Pipe_GetCurrentPipe() (UPNUM & PIPE_PIPENUM_MASK)
/** Enables the currently selected pipe so that data can be sent and received through it to and from
* an attached device.
@@ -241,78 +242,78 @@ * \note Pipes must first be configured properly rather than just being enabled via the
* Pipe_ConfigurePipe() macro, which calls Pipe_EnablePipe() automatically.
*/
- #define Pipe_EnablePipe() MACROS{ UPCONX |= (1 << PEN); }MACROE
+ #define Pipe_EnablePipe() MACROS{ UPCONX |= (1 << PEN); }MACROE
/** Disables the currently selected pipe so that data cannot be sent and received through it to and
* from an attached device.
*/
- #define Pipe_DisablePipe() MACROS{ UPCONX &= ~(1 << PEN); }MACROE
+ #define Pipe_DisablePipe() MACROS{ UPCONX &= ~(1 << PEN); }MACROE
/** Returns true if the currently selected pipe is enabled, false otherwise. */
- #define Pipe_IsEnabled() ((UPCONX & (1 << PEN)) ? true : false)
+ #define Pipe_IsEnabled() ((UPCONX & (1 << PEN)) ? true : false)
/** Sets the token for the currently selected endpoint to one of the tokens specified by the PIPE_TOKEN_*
* masks. This should only be used on CONTROL type endpoints, to allow for bidirectional transfer of
* data during control requests.
*/
- #define Pipe_SetToken(token) MACROS{ UPCFG0X = ((UPCFG0X & ~PIPE_TOKEN_MASK) | token); }MACROE
+ #define Pipe_SetToken(token) MACROS{ UPCFG0X = ((UPCFG0X & ~PIPE_TOKEN_MASK) | token); }MACROE
/** Configures the currently selected pipe to allow for an unlimited number of IN requests. */
- #define Pipe_SetInfiniteINRequests() MACROS{ UPCONX |= (1 << INMODE); }MACROE
+ #define Pipe_SetInfiniteINRequests() MACROS{ UPCONX |= (1 << INMODE); }MACROE
/** Configures the currently selected pipe to only allow the specified number of IN requests to be
* accepted by the pipe before it is automatically frozen.
*/
- #define Pipe_SetFiniteINRequests(n) MACROS{ UPCONX &= ~(1 << INMODE); UPINRQX = n; }MACROE
+ #define Pipe_SetFiniteINRequests(n) MACROS{ UPCONX &= ~(1 << INMODE); UPINRQX = n; }MACROE
/** Returns true if the currently selected pipe is configured, false otherwise. */
- #define Pipe_IsConfigured() ((UPSTAX & (1 << CFGOK)) ? true : false)
+ #define Pipe_IsConfigured() ((UPSTAX & (1 << CFGOK)) ? true : false)
/** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. */
- #define Pipe_SetInterruptPeriod(ms) MACROS{ UPCFG2X = ms; }MACROE
+ #define Pipe_SetInterruptPeriod(ms) MACROS{ UPCFG2X = ms; }MACROE
/** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should
* be serviced.
*/
- #define Pipe_GetPipeInterrupts() UPINT
+ #define Pipe_GetPipeInterrupts() UPINT
/** Clears the interrupt flag for the specified pipe number. */
- #define Pipe_ClearPipeInterrupt(n) MACROS{ UPINT &= ~(1 << n); }MACROE
+ #define Pipe_ClearPipeInterrupt(n) MACROS{ UPINT &= ~(1 << n); }MACROE
/** Returns true if the specified pipe's interrupt period has elapsed, false otherwise. */
- #define Pipe_HasPipeInterrupted(n) ((UPINT & (1 << n)) ? true : false)
+ #define Pipe_HasPipeInterrupted(n) ((UPINT & (1 << n)) ? true : false)
/** Clears the pipe bank, and switches to the alternate bank if the currently selected pipe is
* dual-banked. When cleared, this either frees the bank up for the next packet from the host
* (if the endpoint is of the OUT direction) or sends the packet contents to the host (if the
* pipe is of the IN direction).
*/
- #define Pipe_ClearCurrentBank() MACROS{ UPINTX &= ~(1 << FIFOCON); }MACROE
+ #define Pipe_ClearCurrentBank() MACROS{ UPINTX &= ~(1 << FIFOCON); }MACROE
/** Unfreezes the pipe, allowing it to communicate with an attached device. */
- #define Pipe_Unfreeze() MACROS{ UPCONX &= ~(1 << PFREEZE); }MACROE
+ #define Pipe_Unfreeze() MACROS{ UPCONX &= ~(1 << PFREEZE); }MACROE
/** Freezes the pipe, preventing it from communicating with an attached device. */
- #define Pipe_Freeze() MACROS{ UPCONX |= (1 << PFREEZE); }MACROE
+ #define Pipe_Freeze() MACROS{ UPCONX |= (1 << PFREEZE); }MACROE
/** Clears the master pipe error flag. */
- #define Pipe_ClearError() MACROS{ UPINTX &= ~(1 << PERRI); }MACROE
+ #define Pipe_ClearError() MACROS{ UPINTX &= ~(1 << PERRI); }MACROE
/** Returns true if the master pipe error flag is set for the currently selected pipe, indicating that
* some sort of hardware error has occurred on the pipe.
*
* \see Pipe_GetErrorFlags() macro for information on retreiving the exact error flag.
*/
- #define Pipe_IsError() ((UPINTX & (1 << PERRI)) ? true : false)
+ #define Pipe_IsError() ((UPINTX & (1 << PERRI)) ? true : false)
/** Clears all the currently selected pipe's hardware error flags, but does not clear the master error
* flag for the pipe. */
- #define Pipe_ClearErrorFlags() MACROS{ UPERRX = 0; }MACROE
+ #define Pipe_ClearErrorFlags() MACROS{ UPERRX = 0; }MACROE
/** Returns a mask of the hardware error flags which have occured on the currently selected pipe. This
* value can then be masked against the PIPE_ERRORFLAG_* masks to determine what error has occurred.
*/
- #define Pipe_GetErrorFlags() UPERRX
+ #define Pipe_GetErrorFlags() UPERRX
/** Returns true if the currently selected pipe may be read from (if data is waiting in the pipe
* bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT
@@ -320,40 +321,40 @@ * is an IN direction and no packet has been received, or if the pipe is an OUT direction and the
* pipe bank is full.
*/
- #define Pipe_ReadWriteAllowed() ((UPINTX & (1 << RWAL)) ? true : false)
+ #define Pipe_ReadWriteAllowed() ((UPINTX & (1 << RWAL)) ? true : false)
/** Clears the flag indicating that a SETUP request has been sent to the attached device from the
* currently selected CONTROL type pipe.
*/
- #define Pipe_ClearSetupSent() MACROS{ UPINTX &= ~(1 << TXSTPI); }MACROE
+ #define Pipe_ClearSetupSent() MACROS{ UPINTX &= ~(1 << TXSTPI); }MACROE
/** Returns true if no SETUP request is currently being sent to the attached device, false otherwise. */
- #define Pipe_IsSetupSent() ((UPINTX & (1 << TXSTPI)) ? true : false)
+ #define Pipe_IsSetupSent() ((UPINTX & (1 << TXSTPI)) ? true : false)
/** Returns true if the currently selected pipe has been stalled by the attached device, false otherwise. */
- #define Pipe_IsStalled() ((UPINTX & (1 << RXSTALLI)) ? true : false)
+ #define Pipe_IsStalled() ((UPINTX & (1 << RXSTALLI)) ? true : false)
/** Clears the stall condition on the currently selected pipe. */
- #define Pipe_ClearStall() MACROS{ UPINTX &= ~(1 << RXSTALLI); }MACROE
+ #define Pipe_ClearStall() MACROS{ UPINTX &= ~(1 << RXSTALLI); }MACROE
/** Returns true if an IN request has been received on the currently selected CONTROL type pipe, false
* otherwise.
*/
- #define Pipe_IsSetupINReceived() ((UPINTX & (1 << RXINI)) ? true : false)
+ #define Pipe_IsSetupINReceived() ((UPINTX & (1 << RXINI)) ? true : false)
/** Returns true if the currently selected CONTROL type pipe is ready to send an OUT request, false
* otherwise.
*/
- #define Pipe_IsSetupOUTReady() ((UPINTX & (1 << TXOUTI)) ? true : false)
+ #define Pipe_IsSetupOUTReady() ((UPINTX & (1 << TXOUTI)) ? true : false)
/** Acknowedges the reception of a setup IN request from the attached device on the currently selected
* CONTROL type endpoint, allowing for the transmission of a setup OUT packet, or the reception of
* another setup IN packet.
*/
- #define Pipe_ClearSetupIN() MACROS{ UPINTX &= ~(1 << RXINI); UPINTX &= ~(1 << FIFOCON); }MACROE
+ #define Pipe_ClearSetupIN() MACROS{ UPINTX &= ~(1 << RXINI); UPINTX &= ~(1 << FIFOCON); }MACROE
/** Sends the currently selected CONTROL type pipe's contents to the device as a setup OUT packet. */
- #define Pipe_ClearSetupOUT() MACROS{ UPINTX &= ~(1 << TXOUTI); UPINTX &= ~(1 << FIFOCON); }MACROE
+ #define Pipe_ClearSetupOUT() MACROS{ UPINTX &= ~(1 << TXOUTI); UPINTX &= ~(1 << FIFOCON); }MACROE
/** Returns true if the device sent a NAK (Negative Acknowedge) in response to the last sent packet on
* the currently selected pipe. This ocurrs when the host sends a packet to the device, but the device
@@ -361,13 +362,13 @@ * received, it must be cleard using Pipe_ClearNAKReceived() before the previous (or any other) packet
* can be re-sent.
*/
- #define Pipe_IsNAKReceived() ((UPINTX & (1 << NAKEDI)) ? true : false)
+ #define Pipe_IsNAKReceived() ((UPINTX & (1 << NAKEDI)) ? true : false)
/** Clears the NAK condition on the currently selected pipe.
*
* \see Pipe_IsNAKReceived() for more details.
*/
- #define Pipe_ClearNAKReceived() MACROS{ UPINTX &= ~(1 << NAKEDI); }MACROE
+ #define Pipe_ClearNAKReceived() MACROS{ UPINTX &= ~(1 << NAKEDI); }MACROE
/* Enums: */
/** Enum for the possible error return codes of the Pipe_WaitUntilReady function */
@@ -401,19 +402,21 @@ /* Inline Functions: */
/** Reads one byte from the currently selected pipe's bank, for OUT direction pipes. */
- static inline uint8_t Pipe_Read_Byte(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint8_t Pipe_Read_Byte(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint8_t Pipe_Read_Byte(void)
{
return UPDATX;
}
/** Writes one byte from the currently selected pipe's bank, for IN direction pipes. */
+ static inline void Pipe_Write_Byte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
static inline void Pipe_Write_Byte(const uint8_t Byte)
{
UPDATX = Byte;
}
/** Discards one byte from the currently selected pipe's bank, for OUT direction pipes. */
+ static inline void Pipe_Discard_Byte(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_Byte(void)
{
uint8_t Dummy;
@@ -424,7 +427,7 @@ /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT
* direction pipes.
*/
- static inline uint16_t Pipe_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint16_t Pipe_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint16_t Pipe_Read_Word_LE(void)
{
uint16_t Data;
@@ -438,7 +441,7 @@ /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT
* direction pipes.
*/
- static inline uint16_t Pipe_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint16_t Pipe_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint16_t Pipe_Read_Word_BE(void)
{
uint16_t Data;
@@ -452,6 +455,7 @@ /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN
* direction pipes.
*/
+ static inline void Pipe_Write_Word_LE(const uint16_t Word) ATTR_ALWAYS_INLINE;
static inline void Pipe_Write_Word_LE(const uint16_t Word)
{
UPDATX = (Word & 0xFF);
@@ -461,6 +465,7 @@ /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN
* direction pipes.
*/
+ static inline void Pipe_Write_Word_BE(const uint16_t Word) ATTR_ALWAYS_INLINE;
static inline void Pipe_Write_Word_BE(const uint16_t Word)
{
UPDATX = (Word >> 8);
@@ -468,6 +473,7 @@ }
/** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes. */
+ static inline void Pipe_Ignore_Word(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Ignore_Word(void)
{
uint8_t Dummy;
@@ -479,7 +485,7 @@ /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT
* direction pipes.
*/
- static inline uint32_t Pipe_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint32_t Pipe_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint32_t Pipe_Read_DWord_LE(void)
{
union
@@ -499,7 +505,7 @@ /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT
* direction pipes.
*/
- static inline uint32_t Pipe_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT;
+ static inline uint32_t Pipe_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
static inline uint32_t Pipe_Read_DWord_BE(void)
{
union
@@ -519,6 +525,7 @@ /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN
* direction pipes.
*/
+ static inline void Pipe_Write_DWord_LE(const uint32_t DWord) ATTR_ALWAYS_INLINE;
static inline void Pipe_Write_DWord_LE(const uint32_t DWord)
{
Pipe_Write_Word_LE(DWord);
@@ -527,7 +534,8 @@ /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN
* direction pipes.
- */
+ */
+ static inline void Pipe_Write_DWord_BE(const uint32_t DWord) ATTR_ALWAYS_INLINE;
static inline void Pipe_Write_DWord_BE(const uint32_t DWord)
{
Pipe_Write_Word_BE(DWord >> 16);
@@ -535,6 +543,7 @@ }
/** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes. */
+ static inline void Pipe_Ignore_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Ignore_DWord(void)
{
uint8_t Dummy;
@@ -754,14 +763,14 @@ /* Macros: */
#define PIPE_TOKEN_MASK (0x03 << PTOKEN0)
- #define Pipe_AllocateMemory() MACROS{ UPCFG1X |= (1 << ALLOC); }MACROE
- #define Pipe_DeallocateMemory() MACROS{ UPCFG1X &= ~(1 << ALLOC); }MACROE
+ #define Pipe_AllocateMemory() MACROS{ UPCFG1X |= (1 << ALLOC); }MACROE
+ #define Pipe_DeallocateMemory() MACROS{ UPCFG1X &= ~(1 << ALLOC); }MACROE
/* Function Prototypes: */
void Pipe_ClearPipes(void);
/* Inline Functions: */
- static inline uint8_t Pipe_BytesToEPSizeMask(uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYSINLINE;
+ static inline uint8_t Pipe_BytesToEPSizeMask(uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE;
static inline uint8_t Pipe_BytesToEPSizeMask(uint16_t Bytes)
{
if (Bytes <= 8)
diff --git a/LUFA/MigrationInformation.txt b/LUFA/MigrationInformation.txt index cd23da332..ebfc364d0 100644 --- a/LUFA/MigrationInformation.txt +++ b/LUFA/MigrationInformation.txt @@ -21,6 +21,9 @@ * <b>Library Demos</b>
* - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission.
*
+ * <b>Non-USB Library Components</b>
+ * - The ATTR_ALWAYSINLINE function attribute macro has been renamed to ATTR_ALWAYS_INLINE.
+ *
* \section Sec_Migration090209 Migrating from 081217 to 090209
*
* <b>Device Mode</b>
diff --git a/LUFA/Scheduler/Scheduler.h b/LUFA/Scheduler/Scheduler.h index 39f94ef80..e536e7137 100644 --- a/LUFA/Scheduler/Scheduler.h +++ b/LUFA/Scheduler/Scheduler.h @@ -175,7 +175,7 @@ * \param DelayCounter Counter which is storing the starting tick count for a given delay.
*/
static inline void Scheduler_ResetDelay(SchedulerDelayCounter_t* const DelayCounter)
- ATTR_NON_NULL_PTR_ARG(1);
+ ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
static inline void Scheduler_ResetDelay(SchedulerDelayCounter_t* const DelayCounter)
{
ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
@@ -229,12 +229,13 @@ #define MAX_DELAYCTR_COUNT 0xFFFF
/* Inline Functions: */
+ static inline void Scheduler_InitScheduler(const uint8_t TotalTasks) ATTR_ALWAYS_INLINE;
static inline void Scheduler_InitScheduler(const uint8_t TotalTasks)
{
Scheduler_TotalTasks = TotalTasks;
}
- static inline void Scheduler_GoSchedule(const uint8_t TotalTasks) ATTR_NO_RETURN;
+ static inline void Scheduler_GoSchedule(const uint8_t TotalTasks) ATTR_NO_RETURN ATTR_ALWAYS_INLINE;
static inline void Scheduler_GoSchedule(const uint8_t TotalTasks)
{
Scheduler_InitScheduler(TotalTasks);
diff --git a/Projects/AVRISP_Programmer/makefile b/Projects/AVRISP_Programmer/makefile index f8d75b658..1ef7370c8 100644 --- a/Projects/AVRISP_Programmer/makefile +++ b/Projects/AVRISP_Programmer/makefile @@ -536,10 +536,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
@@ -678,10 +678,11 @@ clean: begin clean_list clean_binary end clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
@@ -716,4 +717,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+gdb-config doxygen dfu flip flip-ee dfu-ee
diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile index 109976090..0abf05c21 100644 --- a/Projects/Magstripe/makefile +++ b/Projects/Magstripe/makefile @@ -544,10 +544,10 @@ flip-ee: $(TARGET).hex $(TARGET).eep batchisp -hardware usb -device $(MCU) -operation start reset 0 dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep + dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset + # Generate avr-gdb config/init file which does the following: # define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). @@ -686,10 +686,11 @@ clean: begin clean_list clean_binary end clean_binary: $(REMOVE) $(TARGET).hex - + clean_list: @echo $(MSG_CLEANING) $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET)eep.hex $(REMOVE) $(TARGET).cof $(REMOVE) $(TARGET).elf $(REMOVE) $(TARGET).map @@ -724,4 +725,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff \ clean clean_list clean_binary program debug \ -gdb-config doxygen dfu flip +gdb-config doxygen dfu flip flip-ee dfu-ee |