Minor documentation updates.

3 files changed, 11 insertions, 9 deletions

diff --git a/LUFA/ManPages/GettingStarted.txt b/LUFA/ManPages/GettingStarted.txt
index af90d7aca..66be59bfa 100644
--- a/LUFA/ManPages/GettingStarted.txt
+++ b/LUFA/ManPages/GettingStarted.txt
@@ -11,7 +11,9 @@
  *  run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz

  *  master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most

  *  popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included

- *  LUFA applications using different settings, see the following subsections.

+ *  LUFA applications using different settings, see the subsections below.

+ *

+ *  For an overview of the included library applications, bootloaders and demos, see \ref Page_LibraryApps.

  *

  *  <b>Subsections:</b>

  *  - \subpage Page_ConfiguringApps How to Configure the Included Demos, Projects and Bootloaders

diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt
index 22b664473..f1b36884d 100644
--- a/LUFA/ManPages/LUFAPoweredProjects.txt
+++ b/LUFA/ManPages/LUFAPoweredProjects.txt
@@ -37,7 +37,6 @@
  *  - "Fingerlicking Wingdinger" (WARNING: Bad Language if no Javascript), a MIDI controller: http://noisybox.net/electronics/wingdinger/

  *  - Garmin GPS USB to NMEA standard serial sentence translator: http://github.com/nall/garmin-transmogrifier/tree/master

  *  - Generic HID Device Creator : http://generichid.sourceforge.net/

- *  - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3

  *  - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm

  *  - MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g

  *  - Opendous-JTAG, an open source JTAG device: http://code.google.com/p/opendous-jtag/

@@ -46,7 +45,6 @@
  *  - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/

  *  - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/

  *  - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398

- *  - SEGA Megadrive/Super Nintendo Cartridge Reader: http://www.snega2usb.com

  *  - Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/

  *  - USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001

  *  - Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/

@@ -61,4 +59,6 @@
  *  - BAP, A tiny LUFA based AVR Programmer: http://www.busware.de/tiki-index.php?page=BAP

  *  - Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/

  *  - Lightweight CC110x USB dongle for 868MHz Protocols: http://busware.de/tiki-index.php?page=CUL

+ *  - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3

+ *  - SEGA Megadrive/Super Nintendo Cartridge Reader: http://www.snega2usb.com

  */
\ No newline at end of file
diff --git a/Projects/AVRISP-MKII/AVRISP.txt b/Projects/AVRISP-MKII/AVRISP.txt
index f39e68f2c..8ea8c8dac 100644
--- a/Projects/AVRISP-MKII/AVRISP.txt
+++ b/Projects/AVRISP-MKII/AVRISP.txt
@@ -54,18 +54,18 @@
  *  drivers. When prompted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.

  *

  *  Note that this design currently has several limitations:

- *    - Minimum ISP target clock speed of 500KHz due to hardware SPI used

+ *    - Minimum ISP target clock speed of 500KHz due to hardware SPI module prescaler limitations

  *    - No reversed/shorted target connector detection and notification

  *

  *  On AVR models with an ADC converter, AVCC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be

  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models

- *  without an ADC converter, VTARGET will report at a fixed 5V level.

+ *  without an ADC converter, VTARGET will report a fixed 5V level at all times.

  *

  *  When compiled for the XPLAIN board target, this will automatically configure itself for the correct connections to the

- *  XPLAIN's XMEGA AVR, and will enable PDI only programming support (since ISP and TPI modes are not needed).

+ *  XPLAIN's XMEGA AVR, and will enable PDI/TPI only programming support (since ISP mode is not needed).

  *

  *  While this application can be compiled for USB AVRs with as little as 8KB of FLASH, for full functionality 16KB or more

- *  of FLASH is required. On 8KB devices, ISP, PDI or TPI programming support can be disabled to reduce program size.

+ *  of FLASH is required. On 8KB devices, ISP or PDI/TPI programming support can be disabled to reduce program size.

  *

  *  \section Sec_ISP ISP Connections

  *  Connections to the device for SPI programming (when enabled):

@@ -250,8 +250,8 @@
  *   <tr>

  *    <td>XPROG_VIA_HARDWARE_USART</td>

  *    <td>Makefile CDEFS</td>

- *    <td>Define to force the PDI and TPI protocols (when enabled) to use the much faster hardware USART instead of bit-banging to

- *        match the official AVRISP pinout. This breaks pinout compatibility with the official AVRISP MKII (and requires 

+ *    <td>Define to force the PDI and TPI protocols (when enabled) to use the much faster hardware USART instead of bit-banging

+ *        to match the official AVRISP pinout. This breaks pinout compatibility with the official AVRISP MKII (and requires 

  *        seperate ISP and PDI/TPI programming headers) but increases programming speed dramatically.

  *        <i>Ignored when compiled for the XPLAIN board.</i></td>  

  *   </tr>