Commit for the 090401 release.

7 files changed, 37 insertions, 30 deletions

diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt
index fac212019..de0e5abde 100644
--- a/LUFA/ChangeLog.txt
+++ b/LUFA/ChangeLog.txt
@@ -6,7 +6,7 @@
    

  /** \page Page_ChangeLog Project Changelog

   *

-  *  \section Sec_ChangeLogXXXXXX Version XXXXXX

+  *  \section Sec_ChangeLog090401 Version 090401

   *

   *  - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor

   *  - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations

diff --git a/LUFA/Doxygen.conf b/LUFA/Doxygen.conf
index 7cb1c71e5..cc4a6e2de 100644
--- a/LUFA/Doxygen.conf
+++ b/LUFA/Doxygen.conf
@@ -31,7 +31,7 @@ PROJECT_NAME           = "LUFA Library"
 # This could be handy for archiving the generated documentation or 

 # if some version control system is used.

 

-PROJECT_NUMBER         = 000000

+PROJECT_NUMBER         = 090401

 

 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 

 # base path where the generated documentation will be put. 

diff --git a/LUFA/Drivers/USB/HighLevel/USBTask.c b/LUFA/Drivers/USB/HighLevel/USBTask.c
index 69670232b..c58e237e3 100644
--- a/LUFA/Drivers/USB/HighLevel/USBTask.c
+++ b/LUFA/Drivers/USB/HighLevel/USBTask.c
@@ -94,7 +94,7 @@ static void USB_HostTask(void)
 				if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)

 				{

 					USB_HostState = PostWaitState;

-					ErrorCode    = HOST_ENUMERROR_WaitStage;

+					ErrorCode     = HOST_ENUMERROR_WaitStage;

 					break;

 				}

 				

diff --git a/LUFA/Drivers/USB/LowLevel/LowLevel.h b/LUFA/Drivers/USB/LowLevel/LowLevel.h
index 98deaaca1..253d0180e 100644
--- a/LUFA/Drivers/USB/LowLevel/LowLevel.h
+++ b/LUFA/Drivers/USB/LowLevel/LowLevel.h
@@ -109,20 +109,24 @@
 			 */

 			#define USB_MODE_DEVICE                    1

 

-			/** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the

-			 *  USB interface is or should be initialized in the USB host mode.

-			 *

-			 *  \note Not all USB AVRs support host mode.

-			 */

-			#define USB_MODE_HOST                      2

-

-			/** Mode mask for the the USB_Init() function. This indicates that the USB interface should be

-			 *  initialized into whatever mode the UID pin of the USB AVR indicates, and that the device

-			 *  should swap over its mode when the level of the UID pin changes during operation.

-			 *

-			 *  \note Not all USB AVRs support host mode, and thus UID mode.

-			 */

-			#define USB_MODE_UID                       3

+			#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)

+				/** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the

+				 *  USB interface is or should be initialized in the USB host mode.

+				 *

+				 *  \note This token is not available on AVR models which do not support host mode.

+				 */

+				#define USB_MODE_HOST                      2

+			#endif

+			

+			#if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)

+				/** Mode mask for the the USB_Init() function. This indicates that the USB interface should be

+				 *  initialized into whatever mode the UID pin of the USB AVR indicates, and that the device

+				 *  should swap over its mode when the level of the UID pin changes during operation.

+				 *

+				 *  \note This token is not available on AVR models which do not support both host and device modes.

+				 */

+				#define USB_MODE_UID                       3

+			#endif

 			

 			/** Regulator disable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad

 			 *  regulator should be enabled to regulate the data pin voltages to within the USB standard.

@@ -181,10 +185,14 @@
 			 */

 			#define EP_TYPE_MASK                       0b11

 

-			/** Returns boolean true if the VBUS line is currently high (i.e. the USB host is supplying power),

-			 *  otherwise returns false.

-			 */

-			#define USB_VBUS_GetStatus()             ((USBSTA & (1 << VBUS)) ? true : false)

+			#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)

+				/** Returns boolean true if the VBUS line is currently high (i.e. the USB host is supplying power),

+				 *  otherwise returns false.

+				 *

+				 *  \note This token is not available on some AVR models which do not support hardware VBUS monitoring.

+				 */

+				#define USB_VBUS_GetStatus()             ((USBSTA & (1 << VBUS)) ? true : false)

+			#endif

 

 			/** Detaches the device from the USB bus. This has the effect of removing the device from any

 			 *  host if, ceasing USB communications. If no host is present, this prevents any host from

@@ -353,19 +361,18 @@
 			#define USB_Interface_Reset()      MACROS{ uint8_t Temp = USBCON; USBCON = (Temp & ~(1 << USBE)); \

 			                                           USBCON = (Temp | (1 << USBE));           }MACROE

 	

-		/* Inline Functions: */		

+		/* Inline Functions: */

+			#if defined(USB_CAN_BE_BOTH)

 			static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT;

 			static inline uint8_t USB_GetUSBModeFromUID(void)

 			{

-				#if (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__))

 				if (USBSTA & (1 << ID))

 				  return USB_MODE_DEVICE;

 				else

 				  return USB_MODE_HOST;

-				#else

-				return USB_MODE_DEVICE;

-				#endif

 			}

+			#endif

+			

 	#endif

 	

 	/* Disable C linkage for C++ Compilers: */

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.c b/LUFA/Drivers/USB/LowLevel/Pipe.c
index 496df33de..1bc08e1fb 100644
--- a/LUFA/Drivers/USB/LowLevel/Pipe.c
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.c
@@ -190,7 +190,7 @@ uint8_t Pipe_Discard_Stream(uint16_t Length
 }

 

 uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length

-							#if !defined(NO_STREAM_CALLBACKS)

+#if !defined(NO_STREAM_CALLBACKS)

                                  , uint8_t (* const Callback)(void)

 #endif

 								 )

@@ -223,7 +223,7 @@ uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length
 }

 

 uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length

-							#if !defined(NO_STREAM_CALLBACKS)

+#if !defined(NO_STREAM_CALLBACKS)

                                  , uint8_t (* const Callback)(void)

 #endif

 								 )

diff --git a/LUFA/Drivers/USB/LowLevel/StreamCallbacks.h b/LUFA/Drivers/USB/LowLevel/StreamCallbacks.h
index 891f2f5bc..5c2dad637 100644
--- a/LUFA/Drivers/USB/LowLevel/StreamCallbacks.h
+++ b/LUFA/Drivers/USB/LowLevel/StreamCallbacks.h
@@ -48,7 +48,7 @@
 			 *  Stream callback functions should return a value from the StreamCallback_Return_ErrorCodes_t

 			 *  enum.

 			 *

-			 *  Usage Example (Device Endpoint, but applicable for Host pipes also):

+			 *  Usage Example (Device Endpoint, but applicable for Host Pipes also):

 			 *  \code

 			 *  STREAM_CALLBACK(GlobalNotSet); // Callback Prototype

 			 *

diff --git a/LUFA/MigrationInformation.txt b/LUFA/MigrationInformation.txt
index cf104474f..e60958f30 100644
--- a/LUFA/MigrationInformation.txt
+++ b/LUFA/MigrationInformation.txt
@@ -10,7 +10,7 @@
  *  to the next version released. It does not indicate all new additions to the library in each version change, only

  *  areas relevant to making older projects compatible with the API changes of each new release.

  *

- * \section Sec_MigrationXXXXXX Migrating from 090209 to XXXXXX

+ * \section Sec_Migration090401 Migrating from 090209 to 090401

  *

  *  <b>All</b>

  *    - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK",