Cleanups to the MassStorage Device demos, and the MassStorage Device Class driver.

1 files changed, 4 insertions, 12 deletions

diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
index 468a04ab7..2e5adbac3 100644
--- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
+++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
@@ -239,8 +239,6 @@ static void SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* MSInterfaceI
 	

 	/* Succeed the command and update the bytes transferred counter */

 	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;

-	

-	return;

 }

 

 /** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address

@@ -255,15 +253,11 @@ static void SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* MSInterfaceInfo
 	uint32_t BlockAddress;

 	uint16_t TotalBlocks;

 	

-	/* Load in the 32-bit block address (SCSI uses big-endian, so have to do it byte-by-byte) */

-	((uint8_t*)&BlockAddress)[3] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[2];

-	((uint8_t*)&BlockAddress)[2] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[3];

-	((uint8_t*)&BlockAddress)[1] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];

-	((uint8_t*)&BlockAddress)[0] = MSInterfaceInfo->State.CommandBlock.SCSICommandData[5];

+	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */

+	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);

 

-	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to do it byte-by-byte) */

-	((uint8_t*)&TotalBlocks)[1]  = MSInterfaceInfo->State.CommandBlock.SCSICommandData[7];

-	((uint8_t*)&TotalBlocks)[0]  = MSInterfaceInfo->State.CommandBlock.SCSICommandData[8];

+	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */

+	TotalBlocks  = SwapEndian_16(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);

 	

 	/* Check if the block address is outside the maximum allowable value for the LUN */

 	if (BlockAddress >= LUN_MEDIA_BLOCKS)

@@ -289,6 +283,4 @@ static void SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* MSInterfaceInfo
 

 	/* Update the bytes transferred counter and succeed the command */

 	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);

-	

-	return;

 }