Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.

1 files changed, 360 insertions, 0 deletions

diff --git a/Demos/Device/LowLevel/Mouse/Mouse.c b/Demos/Device/LowLevel/Mouse/Mouse.c
new file mode 100644
index 000000000..32b12fc61
--- /dev/null
+++ b/Demos/Device/LowLevel/Mouse/Mouse.c
@@ -0,0 +1,360 @@
+/*

+             LUFA Library

+     Copyright (C) Dean Camera, 2009.

+              

+  dean [at] fourwalledcubicle [dot] com

+      www.fourwalledcubicle.com

+*/

+

+/*

+  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

+

+  Permission to use, copy, modify, and distribute this software

+  and its documentation for any purpose and without fee is hereby

+  granted, provided that the above copyright notice appear in all

+  copies and that both that the copyright notice and this

+  permission notice and warranty disclaimer appear in supporting

+  documentation, and that the name of the author not be used in

+  advertising or publicity pertaining to distribution of the

+  software without specific, written prior permission.

+

+  The author disclaim all warranties with regard to this

+  software, including all implied warranties of merchantability

+  and fitness.  In no event shall the author be liable for any

+  special, indirect or consequential damages or any damages

+  whatsoever resulting from loss of use, data or profits, whether

+  in an action of contract, negligence or other tortious action,

+  arising out of or in connection with the use or performance of

+  this software.

+*/

+

+/** \file

+ *

+ *  Main source file for the Mouse demo. This file contains the main tasks of the demo and

+ *  is responsible for the initial application hardware configuration.

+ */

+ 

+#include "Mouse.h"

+

+/* Scheduler Task List */

+TASK_LIST

+{

+	{ .Task = USB_USBTask          , .TaskStatus = TASK_STOP },

+	{ .Task = USB_Mouse_Report     , .TaskStatus = TASK_STOP },

+};

+

+/* Global Variables */

+/** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot

+ *  protocol reporting mode.

+ */

+bool UsingReportProtocol = true;

+

+/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports

+ *  for either the entire idle duration, or until the report status changes (e.g. the user moves the mouse).

+ */

+uint16_t IdleCount = HID_IDLE_CHANGESONLY;

+

+/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle

+ *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request 

+ *  the current idle period via a Get Idle HID class request, thus its value must be preserved.

+ */

+uint16_t IdleMSRemaining = 0;

+

+

+/** Main program entry point. This routine configures the hardware required by the application, then

+ *  starts the scheduler to run the application tasks.

+ */

+int main(void)

+{

+	/* Disable watchdog if enabled by bootloader/fuses */

+	MCUSR &= ~(1 << WDRF);

+	wdt_disable();

+

+	/* Disable clock division */

+	clock_prescale_set(clock_div_1);

+

+	/* Hardware Initialization */

+	Joystick_Init();

+	LEDs_Init();

+	Buttons_Init();

+	

+	/* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */

+	OCR0A  = 0x7D;

+	TCCR0A = (1 << WGM01);

+	TCCR0B = ((1 << CS01) | (1 << CS00));

+	TIMSK0 = (1 << OCIE0A);

+

+	/* Indicate USB not ready */

+	UpdateStatus(Status_USBNotReady);

+	

+	/* Initialize Scheduler so that it can be used */

+	Scheduler_Init();

+

+	/* Initialize USB Subsystem */

+	USB_Init();

+

+	/* Scheduling - routine never returns, so put this last in the main function */

+	Scheduler_Start();

+}

+

+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and

+ *  starts the library USB task to begin the enumeration and USB management process.

+ */

+void EVENT_USB_Connect(void)

+{

+	/* Start USB management task */

+	Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);

+	

+	/* Indicate USB enumerating */

+	UpdateStatus(Status_USBEnumerating);

+

+	/* Default to report protocol on connect */

+	UsingReportProtocol = true;

+}

+

+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via

+ *  the status LEDs and stops the USB management and Mouse reporting tasks.

+ */

+void EVENT_USB_Disconnect(void)

+{

+	/* Stop running mouse reporting and USB management tasks */

+	Scheduler_SetTaskMode(USB_Mouse_Report, TASK_STOP);

+	Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);

+

+	/* Indicate USB not ready */

+	UpdateStatus(Status_USBNotReady);

+}

+

+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration

+ *  of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.

+ */ 

+void EVENT_USB_ConfigurationChanged(void)

+{

+	/* Setup Mouse Report Endpoint */

+	Endpoint_ConfigureEndpoint(MOUSE_EPNUM, EP_TYPE_INTERRUPT,

+		                       ENDPOINT_DIR_IN, MOUSE_EPSIZE,

+	                           ENDPOINT_BANK_SINGLE);

+

+	/* Indicate USB connected and ready */

+	UpdateStatus(Status_USBReady);

+

+	/* Start running mouse reporting task */

+	Scheduler_SetTaskMode(USB_Mouse_Report, TASK_RUN);

+}

+

+/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific

+ *  control requests that are not handled internally by the USB library (including the HID commands, which are

+ *  all issued via the control endpoint), so that they can be handled appropriately for the application.

+ */

+void EVENT_USB_UnhandledControlPacket(void)

+{

+	/* Handle HID Class specific requests */

+	switch (USB_ControlRequest.bRequest)

+	{

+		case REQ_GetReport:

+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))

+			{

+				USB_MouseReport_Data_t MouseReportData;

+

+				Endpoint_ClearSETUP();

+

+				/* Create the next mouse report for transmission to the host */

+				CreateMouseReport(&MouseReportData);

+	

+				/* Write the report data to the control endpoint */

+				Endpoint_Write_Control_Stream_LE(&MouseReportData, sizeof(MouseReportData));

+				

+				/* Clear the report data afterwards */

+				memset(&MouseReportData, 0, sizeof(MouseReportData));

+

+				/* Finalize the stream transfer to send the last packet or clear the host abort */

+				Endpoint_ClearOUT();

+			}

+		

+			break;

+		case REQ_GetProtocol:

+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))

+			{

+				Endpoint_ClearSETUP();

+				

+				/* Write the current protocol flag to the host */

+				Endpoint_Write_Byte(UsingReportProtocol);

+				

+				/* Send the flag to the host */

+				Endpoint_ClearIN();

+

+				/* Acknowledge status stage */

+				while (!(Endpoint_IsOUTReceived()));

+				Endpoint_ClearOUT();

+			}

+			

+			break;

+		case REQ_SetProtocol:

+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))

+			{

+				Endpoint_ClearSETUP();

+				

+				/* Set or clear the flag depending on what the host indicates that the current Protocol should be */

+				UsingReportProtocol = (USB_ControlRequest.wValue != 0);

+				

+				/* Acknowledge status stage */

+				while (!(Endpoint_IsINReady()));

+				Endpoint_ClearIN();

+			}

+			

+			break;

+		case REQ_SetIdle:

+			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))

+			{

+				Endpoint_ClearSETUP();

+				

+				/* Get idle period in MSB */

+				IdleCount = (USB_ControlRequest.wValue >> 8);

+				

+				/* Acknowledge status stage */

+				while (!(Endpoint_IsINReady()));

+				Endpoint_ClearIN();

+			}

+			

+			break;

+		case REQ_GetIdle:

+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))

+			{		

+				Endpoint_ClearSETUP();

+				

+				/* Write the current idle duration to the host */

+				Endpoint_Write_Byte(IdleCount);

+				

+				/* Send the flag to the host */

+				Endpoint_ClearIN();

+

+				/* Acknowledge status stage */

+				while (!(Endpoint_IsOUTReceived()));

+				Endpoint_ClearOUT();

+			}

+

+			break;

+	}

+}

+

+/** ISR for the timer 0 compare vector. This ISR fires once each millisecond, and increments the

+ *  scheduler elapsed idle period counter when the host has set an idle period.

+ */

+ISR(TIMER0_COMPA_vect, ISR_BLOCK)

+{

+	/* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */

+	if (IdleMSRemaining)

+	  IdleMSRemaining--;

+}

+

+/** Fills the given HID report data structure with the next HID report to send to the host.

+ *

+ *  \param ReportData  Pointer to a HID report data structure to be filled

+ */

+void CreateMouseReport(USB_MouseReport_Data_t* ReportData)

+{

+	uint8_t JoyStatus_LCL    = Joystick_GetStatus();

+	uint8_t ButtonStatus_LCL = Buttons_GetStatus();

+	

+	/* Clear the report contents */

+	memset(ReportData, 0, sizeof(USB_MouseReport_Data_t));

+

+	if (JoyStatus_LCL & JOY_UP)

+	  ReportData->Y = -1;

+	else if (JoyStatus_LCL & JOY_DOWN)

+	  ReportData->Y =  1;

+

+	if (JoyStatus_LCL & JOY_RIGHT)

+	  ReportData->X =  1;

+	else if (JoyStatus_LCL & JOY_LEFT)

+	  ReportData->X = -1;

+

+	if (JoyStatus_LCL & JOY_PRESS)

+	  ReportData->Button  = (1 << 0);

+	  

+	if (ButtonStatus_LCL & BUTTONS_BUTTON1)

+	  ReportData->Button |= (1 << 1);

+}

+

+/** Sends the next HID report to the host, via the keyboard data endpoint. */

+void SendNextReport(void)

+{

+	static USB_MouseReport_Data_t PrevMouseReportData;

+	USB_MouseReport_Data_t        MouseReportData;

+	bool                          SendReport;

+	

+	/* Create the next mouse report for transmission to the host */

+	CreateMouseReport(&MouseReportData);

+	

+	/* Check to see if the report data has changed - if so a report MUST be sent */

+	SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0);

+	

+	/* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick

+	 * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */

+	if ((MouseReportData.Y != 0) || (MouseReportData.X != 0))

+	  SendReport = true;

+	

+	/* Save the current report data for later comparison to check for changes */

+	PrevMouseReportData = MouseReportData;

+	

+	/* Check if the idle period is set and has elapsed */

+	if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))

+	{

+		/* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */

+		IdleMSRemaining = (IdleCount << 2);

+		

+		/* Idle period is set and has elapsed, must send a report to the host */

+		SendReport = true;

+	}

+	

+	/* Select the Mouse Report Endpoint */

+	Endpoint_SelectEndpoint(MOUSE_EPNUM);

+

+	/* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */

+	if (Endpoint_IsReadWriteAllowed() && SendReport)

+	{

+		/* Write Mouse Report Data */

+		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData));

+		

+		/* Finalize the stream transfer to send the last packet */

+		Endpoint_ClearIN();

+	}

+}

+

+/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to

+ *  log to a serial port, or anything else that is suitable for status updates.

+ *

+ *  \param CurrentStatus  Current status of the system, from the Mouse_StatusCodes_t enum

+ */

+void UpdateStatus(uint8_t CurrentStatus)

+{

+	uint8_t LEDMask = LEDS_NO_LEDS;

+	

+	/* Set the LED mask to the appropriate LED mask based on the given status code */

+	switch (CurrentStatus)

+	{

+		case Status_USBNotReady:

+			LEDMask = (LEDS_LED1);

+			break;

+		case Status_USBEnumerating:

+			LEDMask = (LEDS_LED1 | LEDS_LED2);

+			break;

+		case Status_USBReady:

+			LEDMask = (LEDS_LED2 | LEDS_LED4);

+			break;

+	}

+	

+	/* Set the board LEDs to the new LED mask */

+	LEDs_SetAllLEDs(LEDMask);

+}

+

+/** Task to manage HID report generation and transmission to the host, when in report mode. */

+TASK(USB_Mouse_Report)

+{

+	/* Check if the USB system is connected to a host */

+	if (USB_IsConnected)

+	{

+		/* Send the next mouse report to the host */

+		SendNextReport();

+	}

+}