Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

6 files changed, 133 insertions, 127 deletions

diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
index 5ca446667..9b3aea4b8 100644
--- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
+++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -30,9 +30,9 @@
 
 /** \file
  *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special 
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
  *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.  
+ *  the device's capabilities and functions.
  */
 
 #include "Descriptors.h"
@@ -57,22 +57,22 @@
 USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
 {
 	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-		
+
 	.USBSpecification       = VERSION_BCD(01.10),
 	.Class                  = 0x02,
 	.SubClass               = 0x00,
 	.Protocol               = 0x00,
-				
+
 	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-		
+
 	.VendorID               = 0x03EB,
 	.ProductID              = 0x2044,
 	.ReleaseNumber          = VERSION_BCD(00.01),
-		
+
 	.ManufacturerStrIndex   = 0x01,
 	.ProductStrIndex        = 0x02,
 	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-		
+
 	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
 };
 
@@ -83,102 +83,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
  */
 USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 {
-	.Config = 
+	.Config =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
 
 			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
 			.TotalInterfaces        = 2,
-				
+
 			.ConfigurationNumber    = 1,
 			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-				
+
 			.ConfigAttributes       = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
-			
+
 			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
 		},
-		
-	.CDC_CCI_Interface = 
+
+	.CDC_CCI_Interface =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
 
 			.InterfaceNumber        = 0,
 			.AlternateSetting       = 0,
-			
+
 			.TotalEndpoints         = 1,
-				
+
 			.Class                  = 0x02,
 			.SubClass               = 0x02,
 			.Protocol               = 0x01,
-				
+
 			.InterfaceStrIndex      = NO_DESCRIPTOR
 		},
 
-	.CDC_Functional_Header = 
+	.CDC_Functional_Header =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface},
 			.Subtype                = 0x00,
-			
+
 			.CDCSpecification       = VERSION_BCD(01.10),
 		},
 
-	.CDC_Functional_ACM = 
+	.CDC_Functional_ACM =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface},
 			.Subtype                = 0x02,
-			
+
 			.Capabilities           = 0x06,
 		},
-		
-	.CDC_Functional_Union = 
+
+	.CDC_Functional_Union =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface},
 			.Subtype                = 0x06,
-			
+
 			.MasterInterfaceNumber  = 0,
 			.SlaveInterfaceNumber   = 1,
 		},
 
-	.CDC_NotificationEndpoint = 
+	.CDC_NotificationEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-										 
+
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
 			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
 			.PollingIntervalMS      = 0xFF
 		},
 
-	.CDC_DCI_Interface = 
+	.CDC_DCI_Interface =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
 
 			.InterfaceNumber        = 1,
 			.AlternateSetting       = 0,
-			
+
 			.TotalEndpoints         = 2,
-				
+
 			.Class                  = 0x0A,
 			.SubClass               = 0x00,
 			.Protocol               = 0x00,
-				
+
 			.InterfaceStrIndex      = NO_DESCRIPTOR
 		},
 
-	.CDC_DataOutEndpoint = 
+	.CDC_DataOutEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-										 
+
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = CDC_TXRX_EPSIZE,
 			.PollingIntervalMS      = 0x00
 		},
-		
-	.CDC_DataInEndpoint = 
+
+	.CDC_DataInEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-										 
+
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = CDC_TXRX_EPSIZE,
@@ -193,7 +193,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 USB_Descriptor_String_t PROGMEM LanguageString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
-		
+
 	.UnicodeString          = {LANGUAGE_ID_ENG}
 };
 
@@ -204,7 +204,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
 USB_Descriptor_String_t PROGMEM ManufacturerString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
-		
+
 	.UnicodeString          = L"Dean Camera"
 };
 
@@ -215,7 +215,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
 USB_Descriptor_String_t PROGMEM ProductString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
-		
+
 	.UnicodeString          = L"LUFA CDC Demo"
 };
 
@@ -241,30 +241,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 			Address = &DeviceDescriptor;
 			Size    = sizeof(USB_Descriptor_Device_t);
 			break;
-		case DTYPE_Configuration: 
+		case DTYPE_Configuration:
 			Address = &ConfigurationDescriptor;
 			Size    = sizeof(USB_Descriptor_Configuration_t);
 			break;
-		case DTYPE_String: 
+		case DTYPE_String:
 			switch (DescriptorNumber)
 			{
-				case 0x00: 
+				case 0x00:
 					Address = &LanguageString;
 					Size    = pgm_read_byte(&LanguageString.Header.Size);
 					break;
-				case 0x01: 
+				case 0x01:
 					Address = &ManufacturerString;
 					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
 					break;
-				case 0x02: 
+				case 0x02:
 					Address = &ProductString;
 					Size    = pgm_read_byte(&ProductString.Header.Size);
 					break;
 			}
-			
+
 			break;
 	}
-	
-	*DescriptorAddress = Address;		
+
+	*DescriptorAddress = Address;
 	return Size;
 }
+
diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
index 44cf084b6..7a8da898e 100644
--- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
+++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -32,7 +32,7 @@
  *
  *  Header file for Descriptors.c.
  */
- 
+
 #ifndef _DESCRIPTORS_H_
 #define _DESCRIPTORS_H_
 
@@ -40,22 +40,22 @@
 		#include <LUFA/Drivers/USB/USB.h>
 
 		#include <avr/pgmspace.h>
-		
+
 	/* Macros: */
 		/** Endpoint number of the CDC device-to-host notification IN endpoint. */
 		#define CDC_NOTIFICATION_EPNUM         2
 
 		/** Endpoint number of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPNUM                   3	
+		#define CDC_TX_EPNUM                   3
 
 		/** Endpoint number of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPNUM                   4	
+		#define CDC_RX_EPNUM                   4
 
 		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
 		#define CDC_NOTIFICATION_EPSIZE        8
 
 		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16	
+		#define CDC_TXRX_EPSIZE                16
 
 	/* Type Defines: */
 		/** Type define for a CDC class-specific functional header descriptor. This indicates to the host that the device
@@ -80,7 +80,7 @@
 			uint8_t                 Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */
 			uint8_t                 Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. */
 		} USB_Descriptor_CDC_FunctionalACM_t;
-		
+
 		/** Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific
 		 *  CDC control and data interfaces are related. See the CDC class specification for more details.
 		 */
@@ -116,3 +116,4 @@
 		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 
 #endif
+
diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
index 9189ef3e7..22d65ffe7 100644
--- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
+++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -55,7 +55,7 @@ CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
 int main(void)
 {
 	SetupHardware();
-	
+
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 	sei();
 
@@ -119,7 +119,7 @@ void EVENT_USB_Device_ConfigurationChanged(void)
 	LineEncoding.BaudRateBPS = 0;
 
 	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);	
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
 }
 
 /** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
@@ -133,14 +133,14 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
 	{
 		case REQ_GetLineEncoding:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{	
+			{
 				Endpoint_ClearSETUP();
 
 				/* Write the line coding data to the control endpoint */
 				Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
 				Endpoint_ClearOUT();
 			}
-			
+
 			break;
 		case REQ_SetLineEncoding:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
@@ -151,7 +151,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
 				Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
 				Endpoint_ClearIN();
 			}
-	
+
 			break;
 		case REQ_SetControlLineState:
 			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
@@ -164,7 +164,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
 						 CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code:
 				*/
 			}
-	
+
 			break;
 	}
 }
@@ -175,11 +175,11 @@ void CDC_Task(void)
 	char*       ReportString    = NULL;
 	uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
 	static bool ActionSent      = false;
-	
+
 	/* Device must be connected and configured for the task to run */
 	if (USB_DeviceState != DEVICE_STATE_Configured)
 	  return;
-	  
+
 #if 0
 	/* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232
 	 *       handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:
@@ -192,11 +192,11 @@ void CDC_Task(void)
 			.wIndex           = 0,
 			.wLength          = sizeof(uint16_t),
 		};
-		
+
 	uint16_t LineStateMask;
-	
+
 	// Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host
-	
+
 	Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM);
 	Endpoint_Write_Stream_LE(&Notification, sizeof(Notification));
 	Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask));
@@ -227,20 +227,20 @@ void CDC_Task(void)
 
 		/* Write the String to the Endpoint */
 		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString));
-		
+
 		/* Remember if the packet to send completely fills the endpoint */
 		bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE);
 
 		/* Finalize the stream transfer to send the last packet */
 		Endpoint_ClearIN();
 
-		/* If the last packet filled the endpoint, send an empty packet to release the buffer on 
+		/* If the last packet filled the endpoint, send an empty packet to release the buffer on
 		 * the receiver (otherwise all data will be cached until a non-full packet is received) */
 		if (IsFull)
 		{
 			/* Wait until the endpoint is ready for another packet */
 			Endpoint_WaitUntilReady();
-			
+
 			/* Send an empty packet to ensure that the host does not buffer data sent to it */
 			Endpoint_ClearIN();
 		}
@@ -248,8 +248,9 @@ void CDC_Task(void)
 
 	/* Select the Serial Rx Endpoint */
 	Endpoint_SelectEndpoint(CDC_RX_EPNUM);
-	
+
 	/* Throw away any received data from the host */
 	if (Endpoint_IsOUTReceived())
 	  Endpoint_ClearOUT();
 }
+
diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
index 650874c96..b95939b53 100644
--- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
+++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -59,9 +59,9 @@
 
 		/** CDC Class specific request to set the current virtual serial port handshake line states. */
 		#define REQ_SetControlLineState      0x22
-		
+
 		/** Notification type constant for a change in the virtual serial port handshake line states, for
-		 *  use with a USB_Notification_Header_t notification structure when sent to the host via the CDC 
+		 *  use with a USB_Notification_Header_t notification structure when sent to the host via the CDC
 		 *  notification endpoint.
 		 */
 		#define NOTIF_SerialState            0x20
@@ -75,7 +75,7 @@
 		 *  from the host, to indicate that theRTS line state should be high.
 		 */
 		#define CONTROL_LINE_OUT_RTS         (1 << 1)
-		
+
 		/** Mask for the DCD handshake line for use with the a NOTIF_SerialState class specific notification
 		 *  from the device to the host, to indicate that the DCD line state is currently high.
 		 */
@@ -110,7 +110,7 @@
 		 *  to indicate that a data overrun error has occurred on the virtual serial port.
 		 */
 		#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
-		
+
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
 		#define LEDMASK_USB_NOTREADY         LEDS_LED1
 
@@ -138,7 +138,7 @@
 			                      */
 			uint8_t  DataBits; /**< Bits of data per character of the virtual serial port */
 		} CDC_Line_Coding_t;
-		
+
 		/** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a
 		 *  change in the device state asynchronously.
 		 */
@@ -152,7 +152,7 @@
 			uint16_t wIndex; /**< Notification wIndex, notification-specific */
 			uint16_t wLength; /**< Notification wLength, notification-specific */
 		} USB_Notification_Header_t;
-		
+
 	/* Enums: */
 		/** Enum for the possible line encoding formats of a virtual serial port. */
 		enum CDCDevice_CDC_LineCodingFormats_t
@@ -161,7 +161,7 @@
 			OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits */
 			TwoStopBits         = 2, /**< Each frame contains two stop bits */
 		};
-		
+
 		/** Enum for the possible line encoding parity settings of a virtual serial port. */
 		enum CDCDevice_LineCodingParity_t
 		{
@@ -171,14 +171,15 @@
 			Parity_Mark         = 3, /**< Mark parity bit mode on each frame */
 			Parity_Space        = 4, /**< Space parity bit mode on each frame */
 		};
-		
+
 	/* Function Prototypes: */
 		void SetupHardware(void);
 		void CDC_Task(void);
-		
+
 		void EVENT_USB_Device_Connect(void);
 		void EVENT_USB_Device_Disconnect(void);
 		void EVENT_USB_Device_ConfigurationChanged(void);
 		void EVENT_USB_Device_UnhandledControlRequest(void);
 
 #endif
+
diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
index 571168948..4190c2f7d 100644
--- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
+++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Communications Device Class (Virtual Serial Port) Demo
  *
  *  \section SSec_Compat Demo Compatibility:
@@ -28,7 +28,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Communications Device Class (CDC)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Abstract Control Model (ACM)</td>
  *   </tr>
@@ -42,14 +42,14 @@
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section SSec_Description Project Description:
  *
  *  Communications Device Class demonstration application.
  *  This gives a simple reference application for implementing
  *  a CDC device acting as a virtual serial port. Joystick
  *  actions are transmitted to the host as strings. The device
  *  does not respond to serial data sent from the host.
- *  
+ *
  *  After running this demo for the first time on a new computer,
  *  you will need to supply the .INF file located in this demo
  *  project's directory as the device's driver when running under
@@ -70,3 +70,4 @@
  *   </tr>
  *  </table>
  */
+
diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index 18a1e61fd..b556a3b78 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -64,14 +64,14 @@ MCU = at90usb1287
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
 BOARD = USBKEY
 
 
 # Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency in Hz. You can then use this symbol in your source code to 
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
@@ -84,7 +84,7 @@ F_CPU = 8000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     This will define a symbol, F_CLOCK, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -135,7 +135,7 @@ SRC = $(TARGET).c                                                 \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = 
+CPPSRC =
 
 
 # List Assembler source files here.
@@ -148,7 +148,7 @@ CPPSRC =
 ASRC =
 
 
-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
@@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
@@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = 
+PRINTF_LIB =
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
@@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = 
+SCANF_LIB =
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
@@ -299,7 +299,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
+EXTRALIBDIRS =
 
 
 
@@ -322,7 +322,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax 
+LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
@@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
@@ -419,7 +419,7 @@ WINSHELL = cmd
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 
 # Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 
 
 # Compiler flags to generate dependency files.
@@ -506,11 +506,11 @@ sizeafter:
 
 
 # Display compiler version information.
-gccversion : 
+gccversion :
 	@$(CC) --version
 
 
-# Program the device.  
+# Program the device.
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
@@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
 
 
 # Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set
 #     a breakpoint at main().
-gdb-config: 
+gdb-config:
 	@$(REMOVE) $(GDBINIT_FILE)
 	@echo define reset >> $(GDBINIT_FILE)
 	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -637,14 +637,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
 	@echo
 	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
 	@echo
 	@echo $(MSG_COMPILING_CPP) $<
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
 
 
 # Compile: create assembler files from C source files.
@@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 
 
 # Target: clean project.
@@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 debug gdb-config
+