aboutsummaryrefslogtreecommitdiffstats
path: root/Demos/Device
diff options
context:
space:
mode:
authorDean Camera <dean@fourwalledcubicle.com>2009-08-04 08:36:30 +0000
committerDean Camera <dean@fourwalledcubicle.com>2009-08-04 08:36:30 +0000
commit357ccc577bc6f8710ff942019e16cfa6a08466b7 (patch)
tree1a8e984c28da6a4c0229c4504d861bae6c3692a8 /Demos/Device
parenteff07bb87758a12064d9de9c859b1e6e6502f2ea (diff)
downloadlufa-357ccc577bc6f8710ff942019e16cfa6a08466b7.tar.gz
lufa-357ccc577bc6f8710ff942019e16cfa6a08466b7.tar.bz2
lufa-357ccc577bc6f8710ff942019e16cfa6a08466b7.zip
Better fix for LowLevel CDC demo issue where sending data before the line encoding is set will cause a failure of the host to open the port. Added fix to the DualCDC and USBtoSerial LowLevel demos.
Diffstat (limited to 'Demos/Device')
-rw-r--r--Demos/Device/LowLevel/CDC/CDC.c29
-rw-r--r--Demos/Device/LowLevel/DualCDC/DualCDC.c24
-rw-r--r--Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c32
3 files changed, 36 insertions, 49 deletions
diff --git a/Demos/Device/LowLevel/CDC/CDC.c b/Demos/Device/LowLevel/CDC/CDC.c
index 73b486ccd..4b5409f5c 100644
--- a/Demos/Device/LowLevel/CDC/CDC.c
+++ b/Demos/Device/LowLevel/CDC/CDC.c
@@ -45,16 +45,10 @@
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
-CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,
- .CharFormat = OneStopBit,
- .ParityType = Parity_None,
- .DataBits = 8 };
-
-/** Indicates if the host has set the device line encoding. Until the line encoding is set by the host, the device should
- * not attempt to send any bytes.
- */
-bool LineEncodingSet = false;
-
+CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
+ .CharFormat = OneStopBit,
+ .ParityType = Parity_None,
+ .DataBits = 8 };
#if 0
/* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in
@@ -65,7 +59,7 @@ static int CDC_putchar(char c, FILE *stream)
{
Endpoint_SelectEndpoint(CDC_TX_EPNUM);
- if (!(LineEncodingSet))
+ if (!(LineEncoding.BaudRateBPS))
return -1;
while (!(Endpoint_IsReadWriteAllowed()))
@@ -84,7 +78,7 @@ static int CDC_getchar(FILE *stream)
{
int c;
- if (!(LineEncodingSet))
+ if (!(LineEncoding.BaudRateBPS))
return -1;
Endpoint_SelectEndpoint(CDC_RX_EPNUM);
@@ -201,8 +195,6 @@ void EVENT_USB_ConfigurationChanged(void)
*/
void EVENT_USB_UnhandledControlPacket(void)
{
- uint8_t* LineCodingData = (uint8_t*)&LineCoding;
-
/* Process CDC specific control requests */
switch (USB_ControlRequest.bRequest)
{
@@ -213,7 +205,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
- Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
+ Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to send the last packet or clear the host abort */
Endpoint_ClearOUT();
@@ -227,10 +219,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
- Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
-
- /* Indicate that the line encoding has been set, and the device may now send data */
- LineEncodingSet = true;
+ Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to clear the last packet from the host */
Endpoint_ClearIN();
@@ -314,7 +303,7 @@ void CDC_Task(void)
{
ActionSent = false;
}
- else if ((ActionSent == false) && LineEncodingSet)
+ else if ((ActionSent == false) && LineEncoding.BaudRateBPS)
{
ActionSent = true;
diff --git a/Demos/Device/LowLevel/DualCDC/DualCDC.c b/Demos/Device/LowLevel/DualCDC/DualCDC.c
index dd278d535..654ce863e 100644
--- a/Demos/Device/LowLevel/DualCDC/DualCDC.c
+++ b/Demos/Device/LowLevel/DualCDC/DualCDC.c
@@ -45,10 +45,10 @@
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
-CDC_Line_Coding_t LineCoding1 = { .BaudRateBPS = 9600,
- .CharFormat = OneStopBit,
- .ParityType = Parity_None,
- .DataBits = 8 };
+CDC_Line_Coding_t LineEncoding1 = { .BaudRateBPS = 0,
+ .CharFormat = OneStopBit,
+ .ParityType = Parity_None,
+ .DataBits = 8 };
/** Contains the current baud rate and other settings of the second virtual serial port. While this demo does not use
* the physical USART and thus does not use these settings, they must still be retained and returned to the host
@@ -58,10 +58,10 @@ CDC_Line_Coding_t LineCoding1 = { .BaudRateBPS = 9600,
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
* serial link characteristics and instead sends and receives data in endpoint streams.
*/
-CDC_Line_Coding_t LineCoding2 = { .BaudRateBPS = 9600,
- .CharFormat = OneStopBit,
- .ParityType = Parity_None,
- .DataBits = 8 };
+CDC_Line_Coding_t LineEncoding2 = { .BaudRateBPS = 0,
+ .CharFormat = OneStopBit,
+ .ParityType = Parity_None,
+ .DataBits = 8 };
/** Main program entry point. This routine configures the hardware required by the application, then
* starts the scheduler to run the application tasks.
@@ -172,7 +172,7 @@ void EVENT_USB_ConfigurationChanged(void)
void EVENT_USB_UnhandledControlPacket(void)
{
/* Determine which interface's Line Coding data is being set from the wIndex parameter */
- uint8_t* LineCodingData = (USB_ControlRequest.wIndex == 0) ? (uint8_t*)&LineCoding1 : (uint8_t*)&LineCoding2;
+ uint8_t* LineEncodingData = (USB_ControlRequest.wIndex == 0) ? (uint8_t*)&LineEncoding1 : (uint8_t*)&LineEncoding2;
/* Process CDC specific control requests */
switch (USB_ControlRequest.bRequest)
@@ -184,7 +184,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
- Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
+ Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to send the last packet or clear the host abort */
Endpoint_ClearOUT();
@@ -198,7 +198,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
- Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));
+ Endpoint_Read_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t));
/* Finalize the stream transfer to clear the last packet from the host */
Endpoint_ClearIN();
@@ -256,7 +256,7 @@ void CDC1_Task(void)
{
ActionSent = false;
}
- else if (ActionSent == false)
+ else if ((ActionSent == false) && LineEncoding1.BaudRateBPS)
{
ActionSent = true;
diff --git a/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c b/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c
index af963b1fc..2765064f7 100644
--- a/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c
+++ b/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c
@@ -36,10 +36,10 @@
* These values are set by the host via a class-specific request, and the physical USART should be reconfigured to match the
* new settings each time they are changed by the host.
*/
-CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,
- .CharFormat = OneStopBit,
- .ParityType = Parity_None,
- .DataBits = 8 };
+CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
+ .CharFormat = OneStopBit,
+ .ParityType = Parity_None,
+ .DataBits = 8 };
/** Ring (circular) buffer to hold the RX data - data from the host to the attached device on the serial port. */
RingBuff_t Rx_Buffer;
@@ -145,8 +145,6 @@ void EVENT_USB_ConfigurationChanged(void)
*/
void EVENT_USB_UnhandledControlPacket(void)
{
- uint8_t* LineCodingData = (uint8_t*)&LineCoding;
-
/* Process CDC specific control requests */
switch (USB_ControlRequest.bRequest)
{
@@ -157,7 +155,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
/* Write the line coding data to the control endpoint */
- Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(LineCoding));
+ Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(LineEncoding));
/* Finalize the stream transfer to send the last packet or clear the host abort */
Endpoint_ClearOUT();
@@ -171,7 +169,7 @@ void EVENT_USB_UnhandledControlPacket(void)
Endpoint_ClearSETUP();
/* Read the line coding data in from the host into the global struct */
- Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(LineCoding));
+ Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(LineEncoding));
/* Finalize the stream transfer to clear the last packet from the host */
Endpoint_ClearIN();
@@ -259,7 +257,7 @@ void CDC_Task(void)
Endpoint_SelectEndpoint(CDC_TX_EPNUM);
/* Check if the Tx buffer contains anything to be sent to the host */
- if (Tx_Buffer.Elements)
+ if ((Tx_Buffer.Elements) && LineEncoding.BaudRateBPS)
{
/* Wait until Serial Tx Endpoint Ready for Read/Write */
while (!(Endpoint_IsReadWriteAllowed()))
@@ -304,7 +302,7 @@ void CDC_Task(void)
ISR(USART1_RX_vect, ISR_BLOCK)
{
/* Only store received characters if the USB interface is connected */
- if (USB_DeviceState != DEVICE_STATE_Configured)
+ if ((USB_DeviceState != DEVICE_STATE_Configured) && LineEncoding.BaudRateBPS)
Buffer_StoreElement(&Tx_Buffer, UDR1);
}
@@ -314,21 +312,21 @@ void ReconfigureUSART(void)
uint8_t ConfigMask = 0;
/* Determine parity - non odd/even parity mode defaults to no parity */
- if (LineCoding.ParityType == Parity_Odd)
+ if (LineEncoding.ParityType == Parity_Odd)
ConfigMask = ((1 << UPM11) | (1 << UPM10));
- else if (LineCoding.ParityType == Parity_Even)
+ else if (LineEncoding.ParityType == Parity_Even)
ConfigMask = (1 << UPM11);
/* Determine stop bits - 1.5 stop bits is set as 1 stop bit due to hardware limitations */
- if (LineCoding.CharFormat == TwoStopBits)
+ if (LineEncoding.CharFormat == TwoStopBits)
ConfigMask |= (1 << USBS1);
/* Determine data size - 5, 6, 7, or 8 bits are supported */
- if (LineCoding.DataBits == 6)
+ if (LineEncoding.DataBits == 6)
ConfigMask |= (1 << UCSZ10);
- else if (LineCoding.DataBits == 7)
+ else if (LineEncoding.DataBits == 7)
ConfigMask |= (1 << UCSZ11);
- else if (LineCoding.DataBits == 8)
+ else if (LineEncoding.DataBits == 8)
ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
/* Enable double speed, gives better error percentages at 8MHz */
@@ -341,5 +339,5 @@ void ReconfigureUSART(void)
UCSR1C = ConfigMask;
/* Set the USART baud rate register to the desired baud rate value */
- UBRR1 = SERIAL_2X_UBBRVAL((uint16_t)LineCoding.BaudRateBPS);
+ UBRR1 = SERIAL_2X_UBBRVAL((uint16_t)LineEncoding.BaudRateBPS);
}