Optimize vendor/product description string display code in MassStorageHost.

Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.

Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.

Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.

1 files changed, 0 insertions, 61 deletions

diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
deleted file mode 100644
index 88b42e937..000000000
--- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \mainpage Mass Storage Host Demo

- *

- *  \section SSec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Host</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Mass Storage Device</td>

- *   </tr>

- *   <tr> 

- *    <td><b>USB Subclass:</b></td>

- *    <td>Bulk Only</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Mass Storage Standard</td>

- *    <td>USB Bulk-Only Transport Standard</td>

- *    <td>SCSI Primary Commands Specification</td>

- *    <td>SCSI Block Commands Specification</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_Description Project Description: 

- *

- *  Mass Storage host demonstration application. This gives a simple reference

- *  application for implementing a USB Mass Storage host, for USB storage devices

- *  using the standard Mass Storage USB profile.

- *  

- *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped

- *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287

- *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents

- *  of the disk will be dumped to the serial port.

- *

- *  \section SSec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td>

- *     None

- *    </td>

- *   </tr>

- *  </table>

- */
\ No newline at end of file