Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 251 insertions, 251 deletions

diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
index a2c9fd863..b6f3efae3 100644
--- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
+++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
@@ -1,251 +1,251 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the PrinterHost demo. This file contains the main tasks of

- *  the demo and is responsible for the initial application hardware configuration.

- */

-

-#include "PrinterHost.h"

-

-/** Main program entry point. This routine configures the hardware required by the application, then

- *  enters a loop to run the application tasks in sequence.

- */

-int main(void)

-{

-	SetupHardware();

-

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-

-	puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE));

-	sei();

-	

-	for (;;)

-	{

-		USB_Printer_Host();

-		USB_USBTask();

-	}

-}

-

-/** Configures the board hardware and chip peripherals for the demo's functionality. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-	clock_prescale_set(clock_div_1);

-

-	/* Hardware Initialization */

-	SerialStream_Init(9600, false);

-	LEDs_Init();

-	USB_Init();

-}

-

-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and

- *  starts the library USB task to begin the enumeration and USB management process.

- */

-void EVENT_USB_Host_DeviceAttached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);

-}

-

-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and

- *  stops the library USB task management process.

- */

-void EVENT_USB_Host_DeviceUnattached(void)

-{

-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));

-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

-}

-

-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully

- *  enumerated by the host and is now ready to be used by the application.

- */

-void EVENT_USB_Host_DeviceEnumerationComplete(void)

-{

-	LEDs_SetAllLEDs(LEDMASK_USB_READY);

-}

-

-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */

-void EVENT_USB_Host_HostError(uint8_t ErrorCode)

-{

-	USB_ShutDown();

-

-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"

-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-	for(;;);

-}

-

-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while

- *  enumerating an attached USB device.

- */

-void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)

-{

-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"

-	                         " -- Error Code %d\r\n"

-	                         " -- Sub Error Code %d\r\n"

-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);

-

-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-}

-

-/** Task to set the configuration of the attached device after it has been enumerated, and to send some test page

- *  data to the attached printer.

- */

-void USB_Printer_Host(void)

-{

-	uint8_t ErrorCode;

-

-	switch (USB_HostState)

-	{

-		case HOST_STATE_Addressed:

-			puts_P(PSTR("Getting Config Data.\r\n"));

-			

-			/* Select the control pipe for the request transfer */

-			Pipe_SelectPipe(PIPE_CONTROLPIPE);			

-		

-			/* Get and process the configuration descriptor data */

-			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)

-			{

-				if (ErrorCode == ControlError)

-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));

-				else

-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));

-

-				printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);

-				

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-				

-			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */

-			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-			

-			/* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface

-			 * request to switch to the interface alternate setting with the Bidirectional protocol */

-			if (PrinterAltSetting)

-			{

-				USB_ControlRequest = (USB_Request_Header_t)

-					{

-						.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE),

-						.bRequest      = REQ_SetInterface,

-						.wValue        = PrinterAltSetting,

-						.wIndex        = PrinterInterfaceNumber,

-						.wLength       = 0,

-					};

-					

-				if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)

-				{

-					printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n"

-					                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-					/* Indicate error via status LEDs */

-					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-					/* Wait until USB device disconnected */

-					USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-					break;					

-				}

-			}

-			

-			puts_P(PSTR("Retrieving Device ID...\r\n"));

-		

-			char DeviceIDString[300];

-			if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful)

-			{

-				printf_P(PSTR(ESC_FG_RED "Control Error (Get Device ID).\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString);

-

-			puts_P(PSTR("Printer Enumerated.\r\n"));

-

-			USB_HostState = HOST_STATE_Configured;

-			break;

-		case HOST_STATE_Configured:

-			/* Indicate device busy via the status LEDs */

-			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);

-		

-			char  TestPageData[]    = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";

-			uint16_t TestPageLength = strlen(TestPageData);

-		

-			printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);

-

-			if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError)

-			{

-				printf_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n"

-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);

-

-				/* Indicate error via status LEDs */

-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

-

-				/* Wait until USB device disconnected */

-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-				break;

-			}

-

-			puts_P(PSTR("Test Page Sent.\r\n"));

-		

-			/* Indicate device no longer busy */

-			LEDs_SetAllLEDs(LEDMASK_USB_READY);

-

-			USB_HostState = HOST_STATE_WaitForDeviceRemoval;

-			break;

-	}

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the PrinterHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "PrinterHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+
+	puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE));
+	sei();
+	
+	for (;;)
+	{
+		USB_Printer_Host();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
+	/* Hardware Initialization */
+	SerialStream_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(uint8_t ErrorCode)
+{
+	USB_ShutDown();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+/** Task to set the configuration of the attached device after it has been enumerated, and to send some test page
+ *  data to the attached printer.
+ */
+void USB_Printer_Host(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Config Data.\r\n"));
+			
+			/* Select the control pipe for the request transfer */
+			Pipe_SelectPipe(PIPE_CONTROLPIPE);			
+		
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
+				
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+				
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface
+			 * request to switch to the interface alternate setting with the Bidirectional protocol */
+			if (PrinterAltSetting)
+			{
+				USB_ControlRequest = (USB_Request_Header_t)
+					{
+						.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE),
+						.bRequest      = REQ_SetInterface,
+						.wValue        = PrinterAltSetting,
+						.wIndex        = PrinterInterfaceNumber,
+						.wLength       = 0,
+					};
+					
+				if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
+				{
+					printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n"
+					                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+					/* Indicate error via status LEDs */
+					LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+					/* Wait until USB device disconnected */
+					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+					break;					
+				}
+			}
+			
+			puts_P(PSTR("Retrieving Device ID...\r\n"));
+		
+			char DeviceIDString[300];
+			if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Get Device ID).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString);
+
+			puts_P(PSTR("Printer Enumerated.\r\n"));
+
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+			/* Indicate device busy via the status LEDs */
+			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+		
+			char  TestPageData[]    = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";
+			uint16_t TestPageLength = strlen(TestPageData);
+		
+			printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);
+
+			if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError)
+			{
+				printf_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Test Page Sent.\r\n"));
+		
+			/* Indicate device no longer busy */
+			LEDs_SetAllLEDs(LEDMASK_USB_READY);
+
+			USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+			break;
+	}
+}