Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

3 files changed, 50 insertions, 47 deletions

diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h b/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h
index 7bd8d4fe8..692b1fae8 100644
--- a/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h
+++ b/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -40,7 +40,7 @@
 		#define PIMA_OPERATION_GETDEVICEINFO         0x1001
 		#define PIMA_OPERATION_OPENSESSION           0x1002
 		#define PIMA_OPERATION_CLOSESESSION          0x1003
-		
+
 		#define PIMA_RESPONSE_OK                     0x2001
 		#define PIMA_RESPONSE_GENERALERROR           0x2002
 		#define PIMA_RESPONSE_SESSIONNOTOPEN         0x2003
@@ -49,3 +49,4 @@
 		#define PIMA_RESPONSE_PARAMETERNOTSUPPORTED  0x2006
 
 #endif
+
diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c
index 861f55b5d..9d6828e32 100644
--- a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c
+++ b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -56,7 +56,7 @@ void SImage_SendBlockHeader(void)
 
 	/* Write the PIMA block to the data OUT pipe */
 	Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0));
-	
+
 	/* If the block type is a command, send its parameters (if any) */
 	if (PIMA_SendBlock.Type == CType_CommandBlock)
 	{
@@ -69,11 +69,11 @@ void SImage_SendBlockHeader(void)
 			/* Write the PIMA parameters to the data OUT pipe */
 			Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes);
 		}
-		
+
 		/* Send the PIMA command block to the attached device */
 		Pipe_ClearOUT();
 	}
-					
+
 	/* Freeze pipe after use */
 	Pipe_Freeze();
 }
@@ -89,16 +89,16 @@ uint8_t SImage_ReceiveEventHeader(void)
 	/* Unfreeze the events pipe */
 	Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
 	Pipe_Unfreeze();
-	
+
 	/* Read in the event data into the global structure */
 	ErrorCode = Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock));
-	
+
 	/* Clear the pipe after read complete to prepare for next event */
 	Pipe_ClearIN();
-	
+
 	/* Freeze the event pipe again after use */
 	Pipe_Freeze();
-	
+
 	return ErrorCode;
 }
 
@@ -114,7 +114,7 @@ uint8_t SImage_ReceiveBlockHeader(void)
 	/* Unfreeze the data IN pipe */
 	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
 	Pipe_Unfreeze();
-	
+
 	/* Wait until data received on the IN pipe */
 	while (!(Pipe_IsINReceived()))
 	{
@@ -131,7 +131,7 @@ uint8_t SImage_ReceiveBlockHeader(void)
 			if (!(TimeoutMSRem))
 			  return PIPE_RWSTREAM_Timeout;
 		}
-		
+
 		Pipe_Freeze();
 		Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
 		Pipe_Unfreeze();
@@ -159,15 +159,15 @@ uint8_t SImage_ReceiveBlockHeader(void)
 			/* Return error code */
 			return PIPE_RWSTREAM_PipeStalled;
 		}
-		  
+
 		/* Check to see if the device was disconnected, if so exit function */
 		if (USB_HostState == HOST_STATE_Unattached)
 		  return PIPE_RWSTREAM_DeviceDisconnected;
 	}
-		
+
 	/* Load in the response from the attached device */
 	Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0));
-	
+
 	/* Check if the returned block type is a response block */
 	if (PIMA_ReceivedBlock.Type == CType_ResponseBlock)
 	{
@@ -180,14 +180,14 @@ uint8_t SImage_ReceiveBlockHeader(void)
 			/* Read the PIMA parameters from the data IN pipe */
 			Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes);
 		}
-		
+
 		/* Clear pipe bank after use */
 		Pipe_ClearIN();
 	}
-	
+
 	/* Freeze the IN pipe after use */
 	Pipe_Freeze();
-	
+
 	return PIPE_RWSTREAM_NoError;
 }
 
@@ -206,7 +206,7 @@ uint8_t SImage_SendData(void* const Buffer,
 	/* Unfreeze the data OUT pipe */
 	Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
 	Pipe_Unfreeze();
-	
+
 	/* Write the data contents to the pipe */
 	ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes);
 
@@ -215,7 +215,7 @@ uint8_t SImage_SendData(void* const Buffer,
 
 	/* Freeze the pipe again after use */
 	Pipe_Freeze();
-	
+
 	return ErrorCode;
 }
 
@@ -240,7 +240,7 @@ uint8_t SImage_ReadData(void* const Buffer,
 
 	/* Freeze the pipe again after use */
 	Pipe_Freeze();
-	
+
 	return ErrorCode;
 }
 
@@ -255,13 +255,14 @@ bool SImage_IsEventReceived(void)
 	/* Unfreeze the Event pipe */
 	Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
 	Pipe_Unfreeze();
-	
+
 	/* If the pipe contains data, an event has been received */
 	if (Pipe_BytesInPipe())
 	  IsEventReceived = true;
-	
+
 	/* Freeze the pipe after use */
 	Pipe_Freeze();
-	
+
 	return IsEventReceived;
 }
+
diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h
index f2bb18953..2ab36c2ba 100644
--- a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h
+++ b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -32,17 +32,17 @@
  *
  *  Header file for StillImageCommands.c.
  */
- 
+
 #ifndef _STILL_IMAGE_COMMANDS_H_
 #define _STILL_IMAGE_COMMANDS_H_
 
 	/* Includes: */
 		#include <LUFA/Drivers/USB/USB.h>
-		
+
 		#include "PIMACodes.h"
 		#include "../StillImageHost.h"
 
-	/* Macros: */		
+	/* Macros: */
 		/** Length in bytes of a given Unicode string's character length.
 		 *
 		 *  \param[in] chars  Total number of Unicode characters in the string
@@ -51,7 +51,7 @@
 
 		/** Timeout period between the issuing of a command to a device, and the reception of the first packet. */
 		#define COMMAND_DATA_TIMEOUT_MS        10000
-		
+
 		/** Used in the DataLength field of a PIMA container, to give the total container size in bytes for
 		 *  a command container.
 		 *
@@ -79,7 +79,7 @@
 			uint32_t TransactionID; /**< Unique container ID to link blocks together */
 			uint32_t Params[3]; /**< Block parameters to be issued along with the block code (command blocks only) */
 		} PIMA_Container_t;
-	
+
 	/* Enums: */
 		/** Enum for the possible PIMA contains types. */
 		enum PIMA_Container_Types_t
@@ -90,12 +90,12 @@
 			CType_ResponseBlock     = 3, /**< Response container type */
 			CType_EventBlock        = 4, /**< Event Block container type */
 		};
-	
+
 	/* External Variables: */
 		extern PIMA_Container_t PIMA_SendBlock;
 		extern PIMA_Container_t PIMA_ReceivedBlock;
 		extern PIMA_Container_t PIMA_EventBlock;
-	
+
 	/* Function Prototypes: */
 		void    SImage_SendBlockHeader(void);
 		uint8_t SImage_ReceiveBlockHeader(void);
@@ -107,3 +107,4 @@
 		bool    SImage_IsEventReceived(void);
 
 #endif
+