Copy existing Host mode demos to new ClassDriver and LowLevel subfolders.

3 files changed, 0 insertions, 440 deletions

diff --git a/Demos/Host/StillImageHost/Lib/PIMACodes.h b/Demos/Host/StillImageHost/Lib/PIMACodes.h
deleted file mode 100644
index 38755aba8..000000000
--- a/Demos/Host/StillImageHost/Lib/PIMACodes.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2009.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, and distribute this software

-  and its documentation for any purpose and without fee is hereby

-  granted, provided that the above copyright notice appear in all

-  copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header containing macros for possible PIMA commands. Refer to the PIMA standard

- *  documentation for more information on each PIMA command.

- */

-

-#ifndef _PIMA_CODES_H_

-

-	/* Macros: */

-		#define PIMA_OPERATION_GETDEVICEINFO         0x1001

-		#define PIMA_OPERATION_OPENSESSION           0x1002

-		#define PIMA_OPERATION_CLOSESESSION          0x1003

-		

-		#define PIMA_RESPONSE_OK                     0x2001

-		#define PIMA_RESPONSE_GENERALERROR           0x2002

-		#define PIMA_RESPONSE_SESSIONNOTOPEN         0x2003

-		#define PIMA_RESPONSE_INVALIDTRANSACTIONID   0x2004

-		#define PIMA_RESPONSE_OPERATIONNOTSUPPORTED  0x2005

-		#define PIMA_RESPONSE_PARAMETERNOTSUPPORTED  0x2006

-

-#endif

diff --git a/Demos/Host/StillImageHost/Lib/StillImageCommands.c b/Demos/Host/StillImageHost/Lib/StillImageCommands.c
deleted file mode 100644
index f2f666bd1..000000000
--- a/Demos/Host/StillImageHost/Lib/StillImageCommands.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2009.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, and distribute this software

-  and its documentation for any purpose and without fee is hereby

-  granted, provided that the above copyright notice appear in all

-  copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Still Image Device commands, to issue PIMA commands to the device for

- *  reading device status, capacity, and other characteristics as well as

- *  reading and writing of stored image data.

- */

-

-#include "StillImageCommands.h"

-

-/* Globals: */

-/** PIMA block container for the block to send to the device */

-PIMA_Container_t PIMA_SendBlock;

-

-/** PIMA block container for the last received block from the device */

-PIMA_Container_t PIMA_ReceivedBlock;

-

-/** PIMA block container for the last event block received from the device */

-PIMA_Container_t PIMA_EventBlock;

-

-

-/** Function to send the PIMA command container to the attached still image device. */

-void SImage_SendBlockHeader(void)

-{

-	/* Unfreeze the data OUT pipe ready for data transmission */

-	Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);

-	Pipe_Unfreeze();

-

-	/* Write the PIMA block to the data OUT pipe */

-	Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0));

-	

-	/* If the block type is a command, send its parameters (if any) */

-	if (PIMA_SendBlock.Type == CType_CommandBlock)

-	{

-		/* Determine the size of the parameters in the block via the data length attribute */

-		uint8_t ParamBytes = (PIMA_SendBlock.DataLength - PIMA_COMMAND_SIZE(0));

-

-		/* Check if any parameters in the command block */

-		if (ParamBytes)

-		{

-			/* Write the PIMA parameters to the data OUT pipe */

-			Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes);

-		}

-		

-		/* Send the PIMA command block to the attached device */

-		Pipe_ClearOUT();

-	}

-					

-	/* Freeze pipe after use */

-	Pipe_Freeze();

-}

-

-/** Function to receive a PIMA event container from the attached still image device. */

-void SImage_RecieveEventHeader(void)

-{

-	/* Unfreeze the events pipe */

-	Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);

-	Pipe_Unfreeze();

-	

-	/* Read in the event data into the global structure */

-	Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock));

-	

-	/* Clear the pipe after read complete to prepare for next event */

-	Pipe_ClearIN();

-	

-	/* Freeze the event pipe again after use */

-	Pipe_Freeze();

-}

-

-/** Function to receive a PIMA response container from the attached still image device. */

-uint8_t SImage_RecieveBlockHeader(void)

-{

-	uint16_t TimeoutMSRem = COMMAND_DATA_TIMEOUT_MS;

-

-	/* Unfreeze the data IN pipe */

-	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);

-	Pipe_Unfreeze();

-	

-	/* Wait until data received on the IN pipe */

-	while (!(Pipe_IsReadWriteAllowed()))

-	{

-		/* Check to see if a new frame has been issued (1ms elapsed) */

-		if (FrameElapsed)

-		{

-			/* Clear the flag and decrement the timeout period counter */

-			FrameElapsed = false;

-			TimeoutMSRem--;

-

-			/* Check to see if the timeout period for the command has elapsed */

-			if (!(TimeoutMSRem))

-			{

-				/* Return error code */

-				return PIPE_RWSTREAM_Timeout;

-			}

-		}

-		

-		Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);

-

-		/* Check if pipe stalled (command failed by device) */

-		if (Pipe_IsStalled())

-		{

-			/* Clear the stall condition on the OUT pipe */

-			SImage_ClearPipeStall(SIMAGE_DATA_OUT_PIPE);

-

-			/* Return error code and break out of the loop */

-			return PIPE_RWSTREAM_PipeStalled;

-		}

-

-		Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);

-

-		/* Check if pipe stalled (command failed by device) */

-		if (Pipe_IsStalled())

-		{

-			/* Clear the stall condition on the IN pipe */

-			SImage_ClearPipeStall(SIMAGE_DATA_IN_PIPE);

-

-			/* Return error code */

-			return PIPE_RWSTREAM_PipeStalled;

-		}

-		  

-		/* Check to see if the device was disconnected, if so exit function */

-		if (!(USB_IsConnected))

-		{

-			/* Return error code */

-			return PIPE_RWSTREAM_DeviceDisconnected;

-		}

-	};

-	

-	/* Freeze OUT pipe after use */

-	Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);

-	Pipe_Freeze();

-

-	/* Select the IN data pipe for data reception */

-	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);

-	

-	/* Load in the response from the attached device */

-	Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0));

-	

-	/* Check if the returned block type is a response block */

-	if (PIMA_ReceivedBlock.Type == CType_ResponseBlock)

-	{

-		/* Determine the size of the parameters in the block via the data length attribute */

-		uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));

-

-		/* Check if the device has returned any parameters */

-		if (ParamBytes)

-		{

-			/* Read the PIMA parameters from the data IN pipe */

-			Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes);

-		}

-		

-		/* Clear pipe bank after use */

-		Pipe_ClearIN();

-	}

-	

-	/* Freeze the IN pipe after use */

-	Pipe_Freeze();

-	

-	return PIPE_RWSTREAM_NoError;

-}

-

-/** Function to send the given data to the device, after a command block has been issued.

- *

- *  \param Buffer  Source data buffer to send to the device

- *  \param Bytes   Number of bytes to send

- */

-void SImage_SendData(void* Buffer, uint16_t Bytes)

-{

-	/* Unfreeze the data OUT pipe */

-	Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);

-	Pipe_Unfreeze();

-	

-	/* Write the data contents to the pipe */

-	Pipe_Write_Stream_LE(Buffer, Bytes);

-

-	/* Send the last packet to the attached device */

-	Pipe_ClearOUT();

-

-	/* Freeze the pipe again after use */

-	Pipe_Freeze();

-}

-

-/** Function to receive the given data to the device, after a response block has been received.

- *

- *  \param Buffer  Destination data buffer to put read bytes from the device

- *  \param Bytes   Number of bytes to receive

- *

- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum

- */

-uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes)

-{

-	uint8_t ErrorCode;

-

-	/* Unfreeze the data IN pipe */

-	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);

-	Pipe_Unfreeze();

-

-	/* Read in the data into the buffer */

-	ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes);

-

-	/* Freeze the pipe again after use */

-	Pipe_Freeze();

-	

-	return ErrorCode;

-}

-

-/** Function to test if a PIMA event block is waiting to be read in from the attached device.

- *

- *  \return True if an event is waiting to be read in from the device, false otherwise

- */

-bool SImage_IsEventReceived(void)

-{

-	bool IsEventReceived = false;

-

-	/* Unfreeze the Event pipe */

-	Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);

-	Pipe_Unfreeze();

-	

-	/* If the pipe contains data, an event has been received */

-	if (Pipe_BytesInPipe())

-	  IsEventReceived = true;

-	

-	/* Freeze the pipe after use */

-	Pipe_Freeze();

-	

-	return IsEventReceived;

-}

-

-/** Clears the stall condition in the attached device on the nominated endpoint number.

- *

- *  \param EndpointNum  Endpoint number in the attached device whose stall condition is to be cleared

- *

- *  \return A value from the USB_Host_SendControlErrorCodes_t enum

- */

-uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum)

-{

-	USB_ControlRequest = (USB_Request_Header_t)

-		{

-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),

-			.bRequest      = REQ_ClearFeature,

-			.wValue        = FEATURE_ENDPOINT_HALT,

-			.wIndex        = EndpointNum,

-			.wLength       = 0,

-		};

-	

-	/* Select the control pipe for the request transfer */

-	Pipe_SelectPipe(PIPE_CONTROLPIPE);

-

-	return USB_Host_SendControlRequest(NULL);

-}

diff --git a/Demos/Host/StillImageHost/Lib/StillImageCommands.h b/Demos/Host/StillImageHost/Lib/StillImageCommands.h
deleted file mode 100644
index ad0ba55a2..000000000
--- a/Demos/Host/StillImageHost/Lib/StillImageCommands.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2009.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, and distribute this software

-  and its documentation for any purpose and without fee is hereby

-  granted, provided that the above copyright notice appear in all

-  copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for StillImageCommands.c.

- */

- 

-#ifndef _STILL_IMAGE_COMMANDS_H_

-#define _STILL_IMAGE_COMMANDS_H_

-

-	/* Includes: */

-		#include <LUFA/Drivers/USB/USB.h>                        // USB Functionality

-		

-		#include "PIMACodes.h"

-

-	/* Macros: */

-		/** Pipe number of the Still Image data IN pipe */

-		#define SIMAGE_DATA_IN_PIPE            0x01

-

-		/** Pipe number of the Still Image data OUT pipe */

-		#define SIMAGE_DATA_OUT_PIPE           0x02

-

-		/** Pipe number of the Still Image events pipe */

-		#define SIMAGE_EVENTS_PIPE             0x03

-

-		/** Timeout period between the issuing of a command to a device, and the reception of the first packet */

-		#define COMMAND_DATA_TIMEOUT_MS        5000

-		

-		/** Used in the DataLength field of a PIMA container, to give the total container size in bytes for

-		 *  a command container.

-		 *

-		 *  \param params  Number of parameters which are to be sent in the Param field of the container

-		 */

-		#define PIMA_COMMAND_SIZE(params)      ((sizeof(PIMA_SendBlock) - sizeof(PIMA_SendBlock.Params)) + \

-		                                        (params * sizeof(PIMA_SendBlock.Params[0])))

-

-		/** Used in the DataLength field of a PIMA container, to give the total container size in bytes for

-		 *  a data container.

-		 *

-		 *  \param datalen  Length in bytes of the data in the container

-		 */

-		#define PIMA_DATA_SIZE(datalen)        ((sizeof(PIMA_SendBlock) - sizeof(PIMA_SendBlock.Params)) + datalen)

-

-	/* Type Defines: */

-		/** Type define for a PIMA container, use to send commands and receive responses to and from an

-		 *  attached Still Image device.

-		 */

-		typedef struct

-		{

-			uint32_t DataLength; /**< Length of the container and data, in bytes */

-			uint16_t Type; /**< Container type, a value from the PIMA_Container_Types_t enum */

-			uint16_t Code; /**< Command, event or response code of the container */

-			uint32_t TransactionID; /**< Unique container ID to link blocks together */

-			uint32_t Params[4]; /**< Block parameters to be issued along with the block code (command blocks only) */

-		} PIMA_Container_t;

-	

-	/* Enums: */

-		/** Enum for the possible PIMA contains types. */

-		enum PIMA_Container_Types_t

-		{

-			CType_Undefined         = 0, /**< Undefined container type */

-			CType_CommandBlock      = 1, /**< Command Block container type */

-			CType_DataBlock         = 2, /**< Data Block container type */

-			CType_ResponseBlock     = 3, /**< Response container type */

-			CType_EventBlock        = 4, /**< Event Block container type */

-		};

-	

-	/* External Variables: */

-		extern PIMA_Container_t PIMA_SendBlock;

-		extern PIMA_Container_t PIMA_ReceivedBlock;

-		extern PIMA_Container_t PIMA_EventBlock;

-	

-	/* Function Prototypes: */

-		void    SImage_SendBlockHeader(void);

-		uint8_t SImage_RecieveBlockHeader(void);

-		void    SImage_RecieveEventHeader(void);

-		void    SImage_SendData(void* Buffer, uint16_t Bytes);

-		uint8_t SImage_ReadData(void* Buffer, uint16_t Bytes);

-		bool    SImage_IsEventReceived(void);

-		uint8_t SImage_ClearPipeStall(const uint8_t EndpointNum);

-

-#endif