Removed "Host_" section of the function names in ConfigDescriptor.h, as most of the routines can now be used in device mode on the device descriptor.

Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name.

Further module-level documentation updates.

1 files changed, 26 insertions, 26 deletions

diff --git a/LUFA/CompileTimeTokens.txt b/LUFA/CompileTimeTokens.txt
index 53cf9e41e..371c2c790 100644
--- a/LUFA/CompileTimeTokens.txt
+++ b/LUFA/CompileTimeTokens.txt
@@ -14,21 +14,21 @@
  *  \section Sec_SummaryNonUSBTokens Non USB Related Tokens

  *  This section describes compile tokens which affect non-USB sections of the LUFA library.

  *

- *  <b>DISABLE_TERMINAL_CODES</b> - TerminalCodes.h \n

+ *  <b>DISABLE_TERMINAL_CODES</b> - ( \ref Group_Terminal ) \n

  *  If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them

  *  at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If

  *  this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from

  *  the source code at compile time.

  *

- *  <b>NUM_BLOCKS</b> - DynAlloc.h \n

+ *  <b>NUM_BLOCKS</b> - ( \ref Group_MemoryAllocator ) \n

  *  Sets the number of allocable blocks in the psudo-heap of the dynamic memory allocation driver. This should be

  *  defined as a constant larger than zero.

  *

- *  <b>BLOCK_SIZE</b> - DynAlloc.h \n

+ *  <b>BLOCK_SIZE</b> - ( \ref Group_MemoryAllocator ) \n

  *  Sets the size of each allocable block in the psudo-heap of the dynamic memory allocation driver. This should be

  *  defined as a constant larger than zero.

  *

- *  <b>NUM_HANDLES</b> - DynAlloc.h \n

+ *  <b>NUM_HANDLES</b> - ( \ref Group_MemoryAllocator ) \n

  *  Sets the maximum number of managed memory handles which can be handed out by the dynamic memory allocation driver

  *  simultaneously, before a handle (and its associated allocated memory) must be freed.

  *

@@ -36,38 +36,38 @@
  *  \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens

  *  This section describes compile tokens which affect USB class-specific drivers in the LUFA library.

  *

- *  <b>HID_ENABLE_FEATURE_PROCESSING</b> - HIDParser.h \n

+ *  <b>HID_ENABLE_FEATURE_PROCESSING</b> - ( \ref Group_HIDParser ) \n

  *  Define this token to enable the processing of FEATURE HID report items, if any, into the processed HID structure.

  *  By default FEATURE items (which are device features settable by the host but not directly visible by the user) are

  *  skipped when processing a device HID report.

  *

- *  <b>HID_INCLUDE_CONSTANT_DATA_ITEMS</b> - HIDParser.h \n

+ *  <b>HID_INCLUDE_CONSTANT_DATA_ITEMS</b> - ( \ref Group_HIDParser ) \n

  *  By default, constant data items (usually used as spacers to align seperate report items to a byte or word boundary)

  *  in the HID report are skipped during report processing. It is highly unusual for an application to make any use of

  *  constant data items (as they do not carry any useful data and only occupy limited RAM) however if required defining

  *  this switch will put constant data items into the processed HID report structure.

  *

- *  <b>HID_STATETABLE_STACK_DEPTH</b> - HIDParser.h \n

+ *  <b>HID_STATETABLE_STACK_DEPTH</b> - ( \ref Group_HIDParser ) \n

  *  HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This

  *  allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous

  *  state table in a compact manner. This token may be defined to a non-zero value to give the maximum depth of the state

  *  table stack. If not defined, this defaults to the value indicated in the HID.h file documentation.

  *

- *  <b>HID_USAGE_STACK_DEPTH</b> - HIDParser.h \n

+ *  <b>HID_USAGE_STACK_DEPTH</b> - ( \ref Group_HIDParser ) \n

  *  HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession

  *  when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with

  *  different usages in a compact manner. This token may be defined to a non-zero value to set the maximum depth of the

  *  usage stack, indicating the maximum number of USAGE items which can be stored tempoarily until the next INPUT, OUTPUT

  *  and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation.

  *

- *  <b>HID_MAX_COLLECTIONS</b> - HIDParser.h \n

+ *  <b>HID_MAX_COLLECTIONS</b> - ( \ref Group_HIDParser ) \n

  *  HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information

  *  is stored seperately in the processed usage structure (and referred to by the data elements in the structure) to save space.

  *  This token may be defined to a non-zero value to set the maximum number of COLLECTION items which can be processed by the

  *  parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file

  *  documentation.

  *

- *  <b>HID_MAX_REPORTITEMS</b> - HIDParser.h \n

+ *  <b>HID_MAX_REPORTITEMS</b> - ( \ref Group_HIDParser ) \n

  *  All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID

  *  device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which

  *  the report data should be interpreted by the host. This token may be defined to a non-zero value to set the maximum number of

@@ -79,28 +79,28 @@
  *  \section Sec_SummaryUSBTokens USB Driver Related Tokens

  *  This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.

  *

- *  <b>USE_RAM_DESCRIPTORS</b> - StdDescriptors.h \n

+ *  <b>USE_RAM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n

  *  Define this token to indicate to the USB driver that device descriptors are stored in RAM, rather than the default of

  *  the AVR's flash. RAM descriptors may be desirable in applications where speed or minimizing flash usage is more important

  *  than RAM usage, or applications where the descriptors need to be modified at runtime.

  *

- *  <b>USE_EEPROM_DESCRIPTORS</b> - StdDescriptors.h \n

+ *  <b>USE_EEPROM_DESCRIPTORS</b> - ( \ref Group_Descriptors ) \n

  *  Similar to USE_RAM_DESCRIPTORS, but descriptors are stored in the AVR's EEPROM memory rather than RAM.

  *

- *  <b>USE_NONSTANDARD_DESCRIPTOR_NAMES</b> - StdDescriptors.h \n

+ *  <b>USE_NONSTANDARD_DESCRIPTOR_NAMES</b> - ( \ref Group_Descriptors ) \n

  *  The USB 2.0 standard gives some rather obscure names for the elements in the standard descriptor types (device, configuration,

  *  string, endpoint, etc.). By default the LUFA library uses these names in its predefined descriptor structure types for

  *  compatibility. If this token is defined, the structure element names are switched to the LUFA-specific but more descriptive

  *  names documented in the StdDescriptors.h source file.

  *

- *  <b>FIXED_CONTROL_ENDPOINT_SIZE</b> - Endpoint.h \n

+ *  <b>FIXED_CONTROL_ENDPOINT_SIZE</b> - ( \ref Group_EndpointManagement ) \n

  *  By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor.

  *  Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if

  *  descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be

  *  defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled

  *  binary at the expense of flexibility.

  *

- *  <b>STATIC_ENDPOINT_CONFIGURATION</b> - Endpoint.h \n

+ *  <b>STATIC_ENDPOINT_CONFIGURATION</b> - ( \ref Group_EndpointManagement ) \n

  *  By default, the endpoint configuration routine is designed to accept dynamic inputs, so that the endpoints can be configured

  *  using variable values known only at runtime. This allows for a great deal of flexibility, however uses a small amount of binary

  *  space which may be wasted if all endpoint configurations are static and known at compile time. Define this token via the -D switch

@@ -108,18 +108,18 @@
  *  flexibility. Note that with this option dynamic values may still be used, but will result in many times more code to be generated than

  *  if the option was disabled. This is designed to be used only if the FIXED_CONTROL_ENDPOINT_SIZE option is also used.

  *

- *  <b>USE_SINGLE_DEVICE_CONFIGURATION</b> - DevChapter9.h \n

+ *  <b>USE_SINGLE_DEVICE_CONFIGURATION</b> - ( \ref Group_Device ) \n

  *  By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces

  *  the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in

  *  EEPROM or RAM rather than flash memory) and reduces code maintenance. However, many USB device projects use only a single configuration.

  *  Defining this token enables single-configuration mode, reducing the compiled size of the binary at the expense of flexibility.

  *

- *  <b>FEATURELESS_CONTROL_ONLY_DEVICE</b> - DevChapter9.h \n

+ *  <b>FEATURELESS_CONTROL_ONLY_DEVICE</b> \n

  *  In some limited USB device applications, device features (other than self-power) and endpoints other than the control endpoint aren't

  *  used. In such limited situations, this token may be defined to remove the handling of the Set Feature Chapter 9 request entirely and

- *  parts of the Get Feature chapter 9 request to save space. Generally, this is usually only useful in (some) bootloaders.

+ *  parts of the Get Feature chapter 9 request to save space. Generally, this is usually only useful in (some) bootloaders and is best avoided.

  *

- *  <b>NO_STREAM_CALLBACKS</b> - Endpoint.h, Pipe.h \n

+ *  <b>NO_STREAM_CALLBACKS</b> - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n

  *  Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the

  *  host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/

  *  pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed,

@@ -127,39 +127,39 @@
  *  by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as

  *  a parameter.

  *

- *  <b>USB_HOST_TIMEOUT_MS</b> - Host.h \n

+ *  <b>USB_HOST_TIMEOUT_MS</b> - ( \ref Group_Host ) \n

  *  When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached

  *  device fails to respond within the timeout period. This token may be defined to a non-zero value to set the timeout period for

  *  control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.

  *

- *  <b>HOST_DEVICE_SETTLE_DELAY_MS</b> - Host.h \n

+ *  <b>HOST_DEVICE_SETTLE_DELAY_MS</b> - ( \ref Group_Host ) \n

  *  Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or

  *  they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled

  *  back to a known idle state before communications occur with the device. This token may be defined to a non-zero value to set the

  *  device settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.

  *

- *  <b>USE_STATIC_OPTIONS</b> - LowLevel.h \n

+ *  <b>USE_STATIC_OPTIONS</b> - ( \ref Group_USBManagement ) \n

  *  By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad

  *  voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options

  *  mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing

  *  the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an

  *  Options parameter.

  *

- *  <b>USB_DEVICE_ONLY</b> - LowLevel.h \n

+ *  <b>USB_DEVICE_ONLY</b> - ( \ref Group_USBManagement ) \n

  *  For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the

  *  mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to

  *  save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevent on smaller USB AVRs which

  *  do not support host mode.

  *

- *  <b>USB_HOST_ONLY</b> - LowLevel.h \n

+ *  <b>USB_HOST_ONLY</b> - ( \ref Group_USBManagement ) \n

  *  Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.

  *

- *  <b>USB_STREAM_TIMEOUT_MS</b> - LowLevel.h \n

+ *  <b>USB_STREAM_TIMEOUT_MS</b> - ( \ref Group_USBManagement ) \n

  *  When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host

  *  must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero value to set the timeout

  *  period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.

  *

- *  <b>NO_LIMITED_CONTROLLER_CONNECT</b> - Events.h \n

+ *  <b>NO_LIMITED_CONTROLLER_CONNECT</b> - ( \ref Group_Events ) \n

  *  On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of

  *  VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be

  *  slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is